! Started logfile: /image_prod/ug002_uvm//J1337+0206_X_a_dfm.log on Wed Mar 4 17:13:59 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J1337+0206_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J1337+0206_X_a_uvm.fits ! AN table 1: 45 integrations on 21 of 21 possible baselines. ! AN table 2: 60 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.877092 visibilities/baseline/integration-bin. ! Found source: J1337+0206 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 38364 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1337+0206_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 45 telescope corrections were flagged in sub-array 1. ! A total of 20 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 45 telescope corrections were flagged in sub-array 1. ! A total of 20 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! A total of 20 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 45 telescope corrections were flagged in sub-array 1. ! A total of 20 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 45 telescope corrections were flagged in sub-array 1. ! A total of 20 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 45 telescope corrections were flagged in sub-array 1. ! A total of 20 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 45 telescope corrections were flagged in sub-array 1. ! A total of 20 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 45 telescope corrections were flagged in sub-array 1. ! A total of 20 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 45 telescope corrections were flagged in sub-array 1. ! A total of 20 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 45 telescope corrections were flagged in sub-array 1. ! A total of 20 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 45 telescope corrections were flagged in sub-array 1. ! A total of 20 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 45 telescope corrections were flagged in sub-array 1. ! A total of 20 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.002000Jy sigma=9.102352 ! Fit after self-cal, rms=0.962584Jy sigma=8.732533 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6585 mas, bmaj=1.622 mas, bpa=-2.173 degrees ! Estimated noise=0.775324 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0265407 Jy ! Component: 100 - total flux cleaned = 0.0349091 Jy ! Total flux subtracted in 100 components = 0.0349091 Jy ! Clean residual min=-0.002217 max=0.005427 Jy/beam ! Clean residual mean=-0.000000 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.0349091 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0349091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058334Jy sigma=0.491598 ! Fit after self-cal, rms=0.057062Jy sigma=0.480312 ! Inverting map ! Added new window around map position (7.6, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00675651 Jy ! Component: 100 - total flux cleaned = 0.0111301 Jy ! Total flux subtracted in 100 components = 0.0111301 Jy ! Clean residual min=-0.002196 max=0.005148 Jy/beam ! Clean residual mean=-0.000000 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.0460393 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 16 components and 0.0460393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055771Jy sigma=0.466172 ! Fit after self-cal, rms=0.055722Jy sigma=0.465442 ! Inverting map ! Added new window around map position (0.8, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00523703 Jy ! Component: 100 - total flux cleaned = 0.00848015 Jy ! Total flux subtracted in 100 components = 0.00848015 Jy ! Clean residual min=-0.001856 max=0.003348 Jy/beam ! Clean residual mean=-0.000000 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.0545194 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 23 components and 0.0545194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054999Jy sigma=0.457428 ! Fit after self-cal, rms=0.054923Jy sigma=0.456646 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00357128 Jy ! Component: 100 - total flux cleaned = 0.00578246 Jy ! Total flux subtracted in 100 components = 0.00578246 Jy ! Clean residual min=-0.001689 max=0.002594 Jy/beam ! Clean residual mean=-0.000000 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.0603019 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 29 components and 0.0603019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054580Jy sigma=0.452874 ! Fit after self-cal, rms=0.054537Jy sigma=0.452471 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8379 mas, bmaj=1.943 mas, bpa=-2.058 degrees ! Estimated noise=0.405267 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00379116 Jy ! Component: 100 - total flux cleaned = 0.00617693 Jy ! Component: 150 - total flux cleaned = 0.00781628 Jy ! Component: 200 - total flux cleaned = 0.00901705 Jy ! Total flux subtracted in 200 components = 0.00901705 Jy ! Clean residual min=-0.001571 max=0.002360 Jy/beam ! Clean residual mean=-0.000001 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.0693189 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 46 components and 0.069319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054259Jy sigma=0.449323 ! Fit after self-cal, rms=0.054220Jy sigma=0.448806 ! Inverting map ! Added new window around map position (5.8, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00229744 Jy ! Component: 100 - total flux cleaned = 0.00371889 Jy ! Component: 150 - total flux cleaned = 0.00476954 Jy ! Component: 200 - total flux cleaned = 0.00558662 Jy ! Total flux subtracted in 200 components = 0.00558662 Jy ! Clean residual min=-0.001268 max=0.001793 Jy/beam ! Clean residual mean=-0.000000 rms=0.000281 Jy/beam ! Combined flux in latest and established models = 0.0749056 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 69 components and 0.0749056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054109Jy sigma=0.447664 ! Fit after self-cal, rms=0.054084Jy sigma=0.447456 ! Inverting map ! Added new window around map position (-2.6, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166606 Jy ! Component: 100 - total flux cleaned = 0.00278598 Jy ! Component: 150 - total flux cleaned = 0.00339753 Jy ! Component: 200 - total flux cleaned = 0.00375996 Jy ! Total flux subtracted in 200 components = 0.00375996 Jy ! Clean residual min=-0.001042 max=0.001454 Jy/beam ! Clean residual mean=-0.000000 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 0.0786656 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 86 components and 0.0786656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054019Jy sigma=0.446784 ! Fit after self-cal, rms=0.054013Jy sigma=0.446686 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8379 x 1.943 at -2.058 degrees (North through East) ! Clean map min=-0.0010336 max=0.038617 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 KP 0.97 LA 1.09 MK 0.96 ! NL 1.25 OV 0.82 SC 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.99 HN 0.93 KP 1.04 ! LA 1.04 MK 1.14 NL 0.97 OV 1.03 ! PT 0.92 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 KP 1.03 LA 1.09 MK 1.01 ! NL 1.29 OV 0.94 SC 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.08 FD 1.02 HN 0.96 KP 1.00 ! LA 0.99 MK 1.06 NL 1.04 OV 1.01 ! PT 0.96 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 KP 0.97 LA 1.02 MK 0.95 ! NL 1.29 OV 0.86 SC 0.85 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.05 HN 1.04 KP 0.99 ! LA 0.99 MK 1.10 NL 0.99 OV 1.02 ! PT 0.90 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 KP 1.17 LA 1.14 MK 1.09 ! NL 1.25 OV 0.82 SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 FD 1.05 HN 1.04 KP 1.00 ! LA 0.95 MK 1.12 NL 1.04 OV 1.02 ! PT 0.95 SC 1.05 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 KP 1.14 LA 1.14 MK 0.87 ! NL 1.12 OV 0.89 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.04 HN 0.98 KP 0.99 ! LA 0.97 MK 1.00 NL 0.97 OV 1.04 ! PT 0.99 SC 1.08 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 KP 1.03 LA 1.04 MK 0.99 ! NL 1.17 OV 0.90 SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.06 HN 0.98 KP 1.02 ! LA 1.04 MK 1.19 NL 1.00 OV 1.01 ! PT 0.92 SC 1.07 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 KP 0.98 LA 1.03 MK 0.95 ! NL 1.31 OV 0.88 SC 0.84 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.02 HN 0.91 KP 1.05 ! LA 1.04 MK 1.03 NL 1.02 OV 0.99 ! PT 0.95 SC 1.05 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 KP 0.95 LA 1.05 MK 0.97 ! NL 1.25 OV 0.90 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.05 HN 1.04 KP 0.99 ! LA 0.98 MK 1.04 NL 0.98 OV 1.02 ! PT 0.92 SC 1.01 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 KP 0.90 LA 1.04 MK 1.02 ! NL 1.47 OV 0.85 SC 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.99 HN 0.97 KP 1.03 ! LA 0.97 MK 1.05 NL 1.00 OV 1.02 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 KP 0.94 LA 1.16 MK 0.87 ! NL 1.25 OV 0.92 SC 0.85 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.02 HN 0.95 KP 1.05 ! LA 1.00 MK 0.94 NL 1.05 OV 1.00 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 KP 1.03 LA 1.09 MK 0.95 ! NL 1.11 OV 0.91 SC 0.84 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.08 HN 0.93 KP 0.97 ! LA 1.03 MK 0.97 NL 0.89 OV 1.04 ! PT 0.97 SC 1.06 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 KP 1.04 LA 1.07 MK 0.89 ! NL 1.29 OV 0.90 SC 0.83 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.00 HN 0.86 KP 0.98 ! LA 1.03 MK 0.95 NL 0.90 OV 1.07 ! PT 1.01 SC 0.92 ! ! ! Fit before self-cal, rms=0.054013Jy sigma=0.446686 ! Fit after self-cal, rms=0.053498Jy sigma=0.444949 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8359 mas, bmaj=1.932 mas, bpa=-1.54 degrees ! Estimated noise=0.40543 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000734937 Jy ! Component: 100 - total flux cleaned = 0.000975111 Jy ! Component: 150 - total flux cleaned = 0.00114011 Jy ! Component: 200 - total flux cleaned = 0.00124594 Jy ! Total flux subtracted in 200 components = 0.00124594 Jy ! Clean residual min=-0.000836 max=0.000921 Jy/beam ! Clean residual mean=-0.000000 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.0799115 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 104 components and 0.0799115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053475Jy sigma=0.444747 ! Fit after self-cal, rms=0.053503Jy sigma=0.444546 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053503Jy sigma=0.444546 ! Fit after self-cal, rms=0.053890Jy sigma=0.443714 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8334 mas, bmaj=1.928 mas, bpa=-1.497 degrees ! Estimated noise=0.40439 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000479151 Jy ! Component: 100 - total flux cleaned = 0.00071703 Jy ! Component: 150 - total flux cleaned = 0.000822071 Jy ! Component: 200 - total flux cleaned = 0.000886563 Jy ! Total flux subtracted in 200 components = 0.000886563 Jy ! Clean residual min=-0.000771 max=0.000823 Jy/beam ! Clean residual mean=-0.000000 rms=0.000187 Jy/beam ! Combined flux in latest and established models = 0.0807981 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 114 components and 0.0807981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053878Jy sigma=0.443603 ! Fit after self-cal, rms=0.053906Jy sigma=0.443506 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (23.6, -4.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000399331 Jy ! Component: 100 - total flux cleaned = 0.000564882 Jy ! Component: 150 - total flux cleaned = 0.000731331 Jy ! Component: 200 - total flux cleaned = 0.000822598 Jy ! Total flux subtracted in 200 components = 0.000822598 Jy ! Clean residual min=-0.000742 max=0.000747 Jy/beam ! Clean residual mean=-0.000000 rms=0.000183 Jy/beam ! Combined flux in latest and established models = 0.0816206 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 126 components and 0.0816206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053891Jy sigma=0.443388 ! Fit after self-cal, rms=0.053886Jy sigma=0.443369 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053886Jy sigma=0.443369 ! Fit after self-cal, rms=0.053895Jy sigma=0.442986 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.829 mas, bmaj=1.923 mas, bpa=-1.493 degrees ! Estimated noise=0.401754 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000152136 Jy ! Component: 100 - total flux cleaned = 0.000255652 Jy ! Component: 150 - total flux cleaned = 0.000332624 Jy ! Component: 200 - total flux cleaned = 0.000360367 Jy ! Total flux subtracted in 200 components = 0.000360367 Jy ! Clean residual min=-0.000728 max=0.000695 Jy/beam ! Clean residual mean=-0.000000 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 0.081981 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 130 components and 0.081981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053885Jy sigma=0.442907 ! Fit after self-cal, rms=0.053907Jy sigma=0.442859 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.64112e-05 Jy ! Component: 100 - total flux cleaned = 0.000107203 Jy ! Component: 150 - total flux cleaned = 0.000120525 Jy ! Component: 200 - total flux cleaned = 0.000120832 Jy ! Total flux subtracted in 200 components = 0.000120832 Jy ! Clean residual min=-0.000745 max=0.000694 Jy/beam ! Clean residual mean=-0.000000 rms=0.000174 Jy/beam ! Combined flux in latest and established models = 0.0821018 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 135 components and 0.0821018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053900Jy sigma=0.442806 ! Fit after self-cal, rms=0.053899Jy sigma=0.442802 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053899Jy sigma=0.442802 ! Fit after self-cal, rms=0.053630Jy sigma=0.442784 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.178 mas, bmaj=3.282 mas, bpa=5.471 degrees ! Estimated noise=0.520279 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000301181 Jy ! Component: 100 - total flux cleaned = 0.000470264 Jy ! Component: 150 - total flux cleaned = 0.000522336 Jy ! Component: 200 - total flux cleaned = 0.000533537 Jy ! Total flux subtracted in 200 components = 0.000533537 Jy ! Clean residual min=-0.000735 max=0.000767 Jy/beam ! Clean residual mean=-0.000000 rms=0.000208 Jy/beam ! Combined flux in latest and established models = 0.0826354 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 145 components and 0.0826354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053626Jy sigma=0.442765 ! Fit after self-cal, rms=0.053632Jy sigma=0.442755 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.22016e-06 Jy ! Component: 100 - total flux cleaned = -1.47555e-06 Jy ! Component: 150 - total flux cleaned = 8.51827e-06 Jy ! Component: 200 - total flux cleaned = 7.98544e-06 Jy ! Total flux subtracted in 200 components = 7.98544e-06 Jy ! Clean residual min=-0.000722 max=0.000752 Jy/beam ! Clean residual mean=-0.000000 rms=0.000206 Jy/beam ! Combined flux in latest and established models = 0.0826433 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 151 components and 0.0826434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053630Jy sigma=0.442751 ! Fit after self-cal, rms=0.053630Jy sigma=0.442747 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8258 mas, bmaj=1.92 mas, bpa=-1.538 degrees ! Estimated noise=0.399591 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8258 x 1.92 at -1.538 degrees (North through East) ! Clean map min=-0.00068043 max=0.037791 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6508 mas, bmaj=1.602 mas, bpa=-1.451 degrees ! Estimated noise=0.754025 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0262105 Jy ! Component: 100 - total flux cleaned = 0.0380227 Jy ! Component: 150 - total flux cleaned = 0.0461749 Jy ! Component: 200 - total flux cleaned = 0.0521682 Jy ! Total flux subtracted in 200 components = 0.0521682 Jy ! Clean residual min=-0.002018 max=0.003423 Jy/beam ! Clean residual mean=-0.000000 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.0521682 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0521682 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8258 mas, bmaj=1.92 mas, bpa=-1.538 degrees ! Estimated noise=0.399591 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00724396 Jy ! Component: 100 - total flux cleaned = 0.0119643 Jy ! Component: 150 - total flux cleaned = 0.0154242 Jy ! Component: 200 - total flux cleaned = 0.0180969 Jy ! Total flux subtracted in 200 components = 0.0180969 Jy ! Clean residual min=-0.001239 max=0.002316 Jy/beam ! Clean residual mean=-0.000001 rms=0.000301 Jy/beam ! Combined flux in latest and established models = 0.070265 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 36 components and 0.070265 Jy ! Inverting map ! Added new window around map position (-1, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00234593 Jy ! Component: 100 - total flux cleaned = 0.00408974 Jy ! Component: 150 - total flux cleaned = 0.0055275 Jy ! Component: 200 - total flux cleaned = 0.00665882 Jy ! Total flux subtracted in 200 components = 0.00665882 Jy ! Clean residual min=-0.000911 max=0.001180 Jy/beam ! Clean residual mean=-0.000000 rms=0.000215 Jy/beam ! Combined flux in latest and established models = 0.0769238 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 60 components and 0.0769238 Jy ! Inverting map ! Added new window around map position (1.6, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116214 Jy ! Component: 100 - total flux cleaned = 0.00194142 Jy ! Component: 150 - total flux cleaned = 0.00259452 Jy ! Component: 200 - total flux cleaned = 0.00323549 Jy ! Total flux subtracted in 200 components = 0.00323549 Jy ! Clean residual min=-0.000808 max=0.000777 Jy/beam ! Clean residual mean=-0.000000 rms=0.000188 Jy/beam ! Combined flux in latest and established models = 0.0801593 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 75 components and 0.0801593 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.178 mas, bmaj=3.282 mas, bpa=5.471 degrees ! Estimated noise=0.520279 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110882 Jy ! Component: 100 - total flux cleaned = 0.00171523 Jy ! Component: 150 - total flux cleaned = 0.00214046 Jy ! Component: 200 - total flux cleaned = 0.00228636 Jy ! Total flux subtracted in 200 components = 0.00228636 Jy ! Clean residual min=-0.000755 max=0.000763 Jy/beam ! Clean residual mean=-0.000000 rms=0.000214 Jy/beam ! Combined flux in latest and established models = 0.0824457 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.34568e-05 Jy ! Component: 100 - total flux cleaned = 0.000168669 Jy ! Component: 150 - total flux cleaned = 0.000253743 Jy ! Component: 200 - total flux cleaned = 0.000305058 Jy ! Total flux subtracted in 200 components = 0.000305058 Jy ! Clean residual min=-0.000732 max=0.000746 Jy/beam ! Clean residual mean=-0.000000 rms=0.000206 Jy/beam ! Combined flux in latest and established models = 0.0827507 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 121 components and 0.0827507 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8258 mas, bmaj=1.92 mas, bpa=-1.538 degrees ! Estimated noise=0.399591 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000101071 Jy ! Component: 100 - total flux cleaned = 0.000183603 Jy ! Component: 150 - total flux cleaned = 0.000255105 Jy ! Component: 200 - total flux cleaned = 0.000207599 Jy ! Total flux subtracted in 200 components = 0.000207599 Jy ! Clean residual min=-0.000711 max=0.000717 Jy/beam ! Clean residual mean=-0.000000 rms=0.000168 Jy/beam ! Combined flux in latest and established models = 0.0829583 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 138 components and 0.0829583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053621Jy sigma=0.442690 ! Fit after self-cal, rms=0.053613Jy sigma=0.442625 wmodel J1337+0206_X_a_map.mod ! Writing 138 model components to file: J1337+0206_X_a_map.mod wobs J1337+0206_X_a_uvs.fits ! Writing UV FITS file: J1337+0206_X_a_uvs.fits wwins J1337+0206_X_a_map.win ! wwins: Wrote 8 windows to J1337+0206_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000174169 Jy ! Component: 100 - total flux cleaned = -0.000186725 Jy ! Component: 150 - total flux cleaned = -0.000175074 Jy ! Component: 200 - total flux cleaned = -0.000163773 Jy ! Component: 250 - total flux cleaned = -0.000141576 Jy ! Component: 300 - total flux cleaned = -0.000119846 Jy ! Component: 350 - total flux cleaned = -6.66646e-05 Jy ! Component: 400 - total flux cleaned = -1.4317e-05 Jy ! Component: 450 - total flux cleaned = 5.78313e-05 Jy ! Component: 500 - total flux cleaned = 9.86192e-05 Jy ! Component: 550 - total flux cleaned = 0.000168882 Jy ! Component: 600 - total flux cleaned = 0.000198516 Jy ! Component: 650 - total flux cleaned = 0.000266919 Jy ! Component: 700 - total flux cleaned = 0.000286162 Jy ! Component: 750 - total flux cleaned = 0.000334064 Jy ! Component: 800 - total flux cleaned = 0.000390855 Jy ! Component: 850 - total flux cleaned = 0.000418861 Jy ! Component: 900 - total flux cleaned = 0.000455924 Jy ! Component: 950 - total flux cleaned = 0.000483402 Jy ! Component: 1000 - total flux cleaned = 0.000483405 Jy ! Component: 1050 - total flux cleaned = 0.000510592 Jy ! Component: 1100 - total flux cleaned = 0.000546464 Jy ! Component: 1150 - total flux cleaned = 0.000573194 Jy ! Component: 1200 - total flux cleaned = 0.00059088 Jy ! Component: 1250 - total flux cleaned = 0.000625946 Jy ! Component: 1300 - total flux cleaned = 0.00064331 Jy ! Component: 1350 - total flux cleaned = 0.000643502 Jy ! Component: 1400 - total flux cleaned = 0.000669228 Jy ! Component: 1450 - total flux cleaned = 0.000686276 Jy ! Component: 1500 - total flux cleaned = 0.000720168 Jy ! Component: 1550 - total flux cleaned = 0.000736986 Jy ! Component: 1600 - total flux cleaned = 0.000761941 Jy ! Component: 1650 - total flux cleaned = 0.000770289 Jy ! Component: 1700 - total flux cleaned = 0.000803195 Jy ! Component: 1750 - total flux cleaned = 0.000786825 Jy ! Component: 1800 - total flux cleaned = 0.000819372 Jy ! Component: 1850 - total flux cleaned = 0.00081943 Jy ! Component: 1900 - total flux cleaned = 0.000827379 Jy ! Component: 1950 - total flux cleaned = 0.000835473 Jy ! Component: 2000 - total flux cleaned = 0.000827584 Jy ! Component: 2050 - total flux cleaned = 0.000827558 Jy ! Component: 2100 - total flux cleaned = 0.000866861 Jy ! Component: 2150 - total flux cleaned = 0.000866826 Jy ! Component: 2200 - total flux cleaned = 0.000859001 Jy ! Component: 2250 - total flux cleaned = 0.000866676 Jy ! Component: 2300 - total flux cleaned = 0.000874406 Jy ! Component: 2350 - total flux cleaned = 0.000859157 Jy ! Component: 2400 - total flux cleaned = 0.000881974 Jy ! Component: 2450 - total flux cleaned = 0.000859355 Jy ! Component: 2500 - total flux cleaned = 0.000889441 Jy ! Component: 2550 - total flux cleaned = 0.000889445 Jy ! Component: 2600 - total flux cleaned = 0.000896892 Jy ! Component: 2650 - total flux cleaned = 0.000896933 Jy ! Component: 2700 - total flux cleaned = 0.000896931 Jy ! Component: 2750 - total flux cleaned = 0.000926338 Jy ! Component: 2800 - total flux cleaned = 0.000911732 Jy ! Component: 2850 - total flux cleaned = 0.000904555 Jy ! Component: 2900 - total flux cleaned = 0.000911766 Jy ! Component: 2950 - total flux cleaned = 0.000940547 Jy ! Component: 3000 - total flux cleaned = 0.000962035 Jy ! Component: 3050 - total flux cleaned = 0.000962009 Jy ! Component: 3100 - total flux cleaned = 0.000990361 Jy ! Component: 3150 - total flux cleaned = 0.000976221 Jy ! Component: 3200 - total flux cleaned = 0.000969205 Jy ! Component: 3250 - total flux cleaned = 0.000976154 Jy ! Component: 3300 - total flux cleaned = 0.00101102 Jy ! Component: 3350 - total flux cleaned = 0.00100405 Jy ! Component: 3400 - total flux cleaned = 0.000976397 Jy ! Component: 3450 - total flux cleaned = 0.00101764 Jy ! Component: 3500 - total flux cleaned = 0.00101074 Jy ! Component: 3550 - total flux cleaned = 0.00102436 Jy ! Component: 3600 - total flux cleaned = 0.000997181 Jy ! Component: 3650 - total flux cleaned = 0.0010377 Jy ! Component: 3700 - total flux cleaned = 0.00104447 Jy ! Component: 3750 - total flux cleaned = 0.00102439 Jy ! Component: 3800 - total flux cleaned = 0.00102439 Jy ! Component: 3850 - total flux cleaned = 0.0010443 Jy ! Component: 3900 - total flux cleaned = 0.00105088 Jy ! Component: 3950 - total flux cleaned = 0.00104434 Jy ! Component: 4000 - total flux cleaned = 0.00103775 Jy ! Component: 4050 - total flux cleaned = 0.00105734 Jy ! Total flux subtracted in 4096 components = 0.0010508 Jy ! Clean residual min=-0.000446 max=0.000444 Jy/beam ! Clean residual mean=-0.000000 rms=0.000114 Jy/beam ! Combined flux in latest and established models = 0.0840091 Jy keep ! Adding 339 model components to the UV plane model. ! The established model now contains 477 components and 0.0840091 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J1337+0206_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8258 x 1.92 at -1.538 degrees (North through East) ! Clean map min=-0.00059603 max=0.037286 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J1337+0206_X_a_map.fits wmodel /image_prod/ug002_uvm//J1337+0206_X_a_map.mod ! Writing 477 model components to file: /image_prod/ug002_uvm//J1337+0206_X_a_map.mod wobs /image_prod/ug002_uvm//J1337+0206_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J1337+0206_X_a_uvs.fits wwins /image_prod/ug002_uvm//J1337+0206_X_a_map.win ! wwins: Wrote 9 windows to /image_prod/ug002_uvm//J1337+0206_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0372858 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000114172 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.918619 0.918619 1.83724 3.67448 7.34895 14.6979 29.3958 58.7916 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.037 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 326.577 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J1337+0206_X_a_dfm.log closed on Wed Mar 4 17:14:06 2020