! Started logfile: /image_prod/ug002_uvm//J1159-0127_X_a_dfm.log on Wed Mar 4 17:04:48 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J1159-0127_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J1159-0127_X_a_uvm.fits ! AN table 1: 90 integrations on 28 of 28 possible baselines. ! AN table 2: 60 integrations on 28 of 28 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1159-0127 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 108 lines of history. ! ! Reading 50400 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1159-0127_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.002236Jy sigma=9.226104 ! Fit after self-cal, rms=0.970098Jy sigma=8.931168 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.684 mas, bmaj=1.642 mas, bpa=1.471 degrees ! Estimated noise=0.646834 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0247123 Jy ! Component: 100 - total flux cleaned = 0.0306766 Jy ! Total flux subtracted in 100 components = 0.0306766 Jy ! Clean residual min=-0.001536 max=0.002283 Jy/beam ! Clean residual mean=0.000000 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.0306766 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0306766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054748Jy sigma=0.462109 ! Fit after self-cal, rms=0.052869Jy sigma=0.444101 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00470887 Jy ! Component: 100 - total flux cleaned = 0.005004 Jy ! Total flux subtracted in 100 components = 0.005004 Jy ! Clean residual min=-0.001465 max=0.001576 Jy/beam ! Clean residual mean=0.000000 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.0356806 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 9 components and 0.0356806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052579Jy sigma=0.441586 ! Fit after self-cal, rms=0.052556Jy sigma=0.441461 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8567 mas, bmaj=1.941 mas, bpa=2.313 degrees ! Estimated noise=0.348301 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.8, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000115911 Jy ! Component: 100 - total flux cleaned = 0.000319732 Jy ! Component: 150 - total flux cleaned = 0.000478745 Jy ! Component: 200 - total flux cleaned = 0.000568938 Jy ! Total flux subtracted in 200 components = 0.000568938 Jy ! Clean residual min=-0.000947 max=0.000902 Jy/beam ! Clean residual mean=0.000000 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.0362495 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 22 components and 0.0362495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052510Jy sigma=0.441043 ! Fit after self-cal, rms=0.052456Jy sigma=0.440801 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8567 x 1.941 at 2.313 degrees (North through East) ! Clean map min=-0.00086242 max=0.034368 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.90 HN 0.96 KP 1.07 ! MK 1.15 NL 1.14 OV 0.90 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.04 HN 1.07 KP 0.95 ! NL 0.95 OV 1.18 PT 1.01 SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.01 HN 0.93 KP 1.06 ! MK 0.97 NL 1.34 OV 0.95 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.12 FD 1.12 HN 0.96 KP 1.01 ! NL 1.01 OV 1.04 PT 1.02 SC 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.96 HN 0.98 KP 1.12 ! MK 1.03 NL 1.27 OV 0.93 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.08 HN 1.00 KP 1.04 ! NL 0.96 OV 1.05 PT 1.05 SC 0.92 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.96 HN 1.01 KP 1.08 ! MK 1.13 NL 1.20 OV 0.90 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.15 HN 1.03 KP 1.00 ! NL 0.97 OV 1.08 PT 1.05 SC 0.91 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.95 HN 1.04 KP 1.07 ! MK 1.10 NL 1.14 OV 0.92 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.05 HN 0.93 KP 0.97 ! NL 0.98 OV 1.03 PT 0.86 SC 0.89 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.94 HN 0.95 KP 1.10 ! MK 1.06 NL 1.21 OV 0.89 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.02 HN 0.99 KP 1.09 ! NL 0.97 OV 1.01 PT 0.97 SC 0.90 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.04 HN 0.96 KP 1.15 ! MK 1.02 NL 1.12 OV 0.86 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.03 HN 0.96 KP 1.16 ! NL 0.93 OV 0.98 PT 0.97 SC 0.96 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.96 HN 0.93 KP 1.05 ! MK 1.01 NL 1.06 OV 0.95 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.02 HN 0.95 KP 1.05 ! NL 1.03 OV 1.06 PT 0.98 SC 0.96 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.94 HN 0.91 KP 0.98 ! MK 1.04 NL 1.21 OV 0.83 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.93 HN 0.98 KP 1.06 ! NL 1.03 OV 1.01 PT 1.01 SC 0.92 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 1.00 HN 0.87 KP 1.00 ! MK 0.97 NL 1.28 OV 0.95 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.03 HN 0.96 KP 0.96 ! NL 1.08 OV 0.97 PT 1.05 SC 0.88 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00 HN 0.87 KP 1.00 ! MK 0.92 NL 1.05 OV 0.94 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 1.03 HN 0.96 KP 0.96 ! NL 0.99 OV 1.07 PT 0.94 SC 0.88 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.95 HN 0.87 KP 0.90 ! MK 0.98 NL 1.19 OV 0.89 SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.96 HN 0.96 KP 0.94 ! NL 0.97 OV 1.03 PT 0.93 SC 0.92 ! ! ! Fit before self-cal, rms=0.052456Jy sigma=0.440801 ! Fit after self-cal, rms=0.050565Jy sigma=0.439320 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8532 mas, bmaj=1.93 mas, bpa=3.177 degrees ! Estimated noise=0.345498 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000434405 Jy ! Component: 100 - total flux cleaned = 0.000554739 Jy ! Component: 150 - total flux cleaned = 0.000564322 Jy ! Component: 200 - total flux cleaned = 0.000571487 Jy ! Total flux subtracted in 200 components = 0.000571487 Jy ! Clean residual min=-0.000623 max=0.000687 Jy/beam ! Clean residual mean=-0.000000 rms=0.000151 Jy/beam ! Combined flux in latest and established models = 0.036821 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 39 components and 0.036821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050560Jy sigma=0.439273 ! Fit after self-cal, rms=0.050571Jy sigma=0.438972 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050571Jy sigma=0.438972 ! Fit after self-cal, rms=0.050120Jy sigma=0.438262 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8534 mas, bmaj=1.927 mas, bpa=3.446 degrees ! Estimated noise=0.345599 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000278872 Jy ! Component: 100 - total flux cleaned = 0.000320359 Jy ! Component: 150 - total flux cleaned = 0.000341353 Jy ! Component: 200 - total flux cleaned = 0.000353966 Jy ! Total flux subtracted in 200 components = 0.000353966 Jy ! Clean residual min=-0.000576 max=0.000639 Jy/beam ! Clean residual mean=-0.000000 rms=0.000143 Jy/beam ! Combined flux in latest and established models = 0.037175 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 53 components and 0.037175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050117Jy sigma=0.438239 ! Fit after self-cal, rms=0.050143Jy sigma=0.438099 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (25.2, -10.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000557816 Jy ! Component: 100 - total flux cleaned = 0.000737274 Jy ! Component: 150 - total flux cleaned = 0.000788435 Jy ! Component: 200 - total flux cleaned = 0.000833539 Jy ! Total flux subtracted in 200 components = 0.000833539 Jy ! Clean residual min=-0.000588 max=0.000601 Jy/beam ! Clean residual mean=-0.000000 rms=0.000139 Jy/beam ! Combined flux in latest and established models = 0.0380085 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 68 components and 0.0380085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050136Jy sigma=0.438028 ! Fit after self-cal, rms=0.050132Jy sigma=0.438003 ! Inverting map ! Added new window around map position (14.8, 34.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000460475 Jy ! Component: 100 - total flux cleaned = 0.000643395 Jy ! Component: 150 - total flux cleaned = 0.000772176 Jy ! Component: 200 - total flux cleaned = 0.000875994 Jy ! Total flux subtracted in 200 components = 0.000875994 Jy ! Clean residual min=-0.000587 max=0.000585 Jy/beam ! Clean residual mean=-0.000000 rms=0.000136 Jy/beam ! Combined flux in latest and established models = 0.0388845 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 84 components and 0.0388845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050124Jy sigma=0.437930 ! Fit after self-cal, rms=0.050121Jy sigma=0.437914 ! Inverting map ! Added new window around map position (-36.6, 7.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000557808 Jy ! Component: 100 - total flux cleaned = 0.000724206 Jy ! Component: 150 - total flux cleaned = 0.000806693 Jy ! Component: 200 - total flux cleaned = 0.000881672 Jy ! Total flux subtracted in 200 components = 0.000881672 Jy ! Clean residual min=-0.000575 max=0.000579 Jy/beam ! Clean residual mean=0.000000 rms=0.000132 Jy/beam ! Combined flux in latest and established models = 0.0397662 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 94 components and 0.0397662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050112Jy sigma=0.437843 ! Fit after self-cal, rms=0.050106Jy sigma=0.437823 ! Inverting map ! Added new window around map position (-50.4, 14.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000503196 Jy ! Component: 100 - total flux cleaned = 0.00066075 Jy ! Component: 150 - total flux cleaned = 0.000794148 Jy ! Component: 200 - total flux cleaned = 0.000859782 Jy ! Total flux subtracted in 200 components = 0.000859782 Jy ! Clean residual min=-0.000540 max=0.000574 Jy/beam ! Clean residual mean=0.000000 rms=0.000132 Jy/beam ! Combined flux in latest and established models = 0.0406259 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 104 components and 0.040626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050098Jy sigma=0.437751 ! Fit after self-cal, rms=0.050094Jy sigma=0.437733 ! Inverting map ! Added new window around map position (-32.2, -26.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000543293 Jy ! Component: 100 - total flux cleaned = 0.000759232 Jy ! Component: 150 - total flux cleaned = 0.000981055 Jy ! Component: 200 - total flux cleaned = 0.00107439 Jy ! Total flux subtracted in 200 components = 0.00107439 Jy ! Clean residual min=-0.000529 max=0.000547 Jy/beam ! Clean residual mean=0.000000 rms=0.000129 Jy/beam ! Combined flux in latest and established models = 0.0417003 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 116 components and 0.0417003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050084Jy sigma=0.437653 ! Fit after self-cal, rms=0.050080Jy sigma=0.437610 ! Inverting map ! Added new window around map position (-37.6, -19.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000510684 Jy ! Component: 100 - total flux cleaned = 0.000837641 Jy ! Component: 150 - total flux cleaned = 0.00107637 Jy ! Component: 200 - total flux cleaned = 0.00126274 Jy ! Total flux subtracted in 200 components = 0.00126274 Jy ! Clean residual min=-0.000503 max=0.000522 Jy/beam ! Clean residual mean=0.000000 rms=0.000126 Jy/beam ! Combined flux in latest and established models = 0.0429631 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 131 components and 0.0429631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050071Jy sigma=0.437543 ! Fit after self-cal, rms=0.050070Jy sigma=0.437532 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050070Jy sigma=0.437532 ! Fit after self-cal, rms=0.050863Jy sigma=0.437635 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8506 mas, bmaj=1.92 mas, bpa=3.526 degrees ! Estimated noise=0.348172 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000487964 Jy ! Component: 100 - total flux cleaned = 0.000821591 Jy ! Component: 150 - total flux cleaned = 0.001117 Jy ! Component: 200 - total flux cleaned = 0.00128646 Jy ! Total flux subtracted in 200 components = 0.00128646 Jy ! Clean residual min=-0.000523 max=0.000546 Jy/beam ! Clean residual mean=0.000000 rms=0.000130 Jy/beam ! Combined flux in latest and established models = 0.0442495 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 142 components and 0.0442495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050854Jy sigma=0.437565 ! Fit after self-cal, rms=0.050877Jy sigma=0.437461 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-20.6, -43.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000414103 Jy ! Component: 100 - total flux cleaned = 0.000550663 Jy ! Component: 150 - total flux cleaned = 0.000676181 Jy ! Component: 200 - total flux cleaned = 0.000793746 Jy ! Total flux subtracted in 200 components = 0.000793746 Jy ! Clean residual min=-0.000499 max=0.000514 Jy/beam ! Clean residual mean=0.000000 rms=0.000126 Jy/beam ! Combined flux in latest and established models = 0.0450433 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 156 components and 0.0450433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050868Jy sigma=0.437400 ! Fit after self-cal, rms=0.050867Jy sigma=0.437371 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050867Jy sigma=0.437371 ! Fit after self-cal, rms=0.051147Jy sigma=0.437404 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.923 mas, bmaj=2.931 mas, bpa=4.23 degrees ! Estimated noise=0.452177 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00051039 Jy ! Component: 100 - total flux cleaned = 0.000779179 Jy ! Component: 150 - total flux cleaned = 0.000971287 Jy ! Component: 200 - total flux cleaned = 0.00110689 Jy ! Total flux subtracted in 200 components = 0.00110689 Jy ! Clean residual min=-0.000530 max=0.000610 Jy/beam ! Clean residual mean=0.000001 rms=0.000153 Jy/beam ! Combined flux in latest and established models = 0.0461502 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 180 components and 0.0461502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051142Jy sigma=0.437372 ! Fit after self-cal, rms=0.051147Jy sigma=0.437340 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000232996 Jy ! Component: 100 - total flux cleaned = 0.000348328 Jy ! Component: 150 - total flux cleaned = 0.00046304 Jy ! Component: 200 - total flux cleaned = 0.000561114 Jy ! Total flux subtracted in 200 components = 0.000561114 Jy ! Clean residual min=-0.000526 max=0.000571 Jy/beam ! Clean residual mean=0.000001 rms=0.000146 Jy/beam ! Combined flux in latest and established models = 0.0467113 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 200 components and 0.0467113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051145Jy sigma=0.437327 ! Fit after self-cal, rms=0.051145Jy sigma=0.437324 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8481 mas, bmaj=1.915 mas, bpa=3.465 degrees ! Estimated noise=0.349555 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8481 x 1.915 at 3.465 degrees (North through East) ! Clean map min=-0.00053851 max=0.03449 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6835 mas, bmaj=1.628 mas, bpa=2.784 degrees ! Estimated noise=0.638525 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0269925 Jy ! Component: 100 - total flux cleaned = 0.0336034 Jy ! Component: 150 - total flux cleaned = 0.036306 Jy ! Component: 200 - total flux cleaned = 0.0381782 Jy ! Total flux subtracted in 200 components = 0.0381782 Jy ! Clean residual min=-0.001304 max=0.001586 Jy/beam ! Clean residual mean=-0.000000 rms=0.000324 Jy/beam ! Combined flux in latest and established models = 0.0381782 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0381782 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8481 mas, bmaj=1.915 mas, bpa=3.465 degrees ! Estimated noise=0.349555 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109208 Jy ! Component: 100 - total flux cleaned = 0.00195149 Jy ! Component: 150 - total flux cleaned = 0.0026471 Jy ! Component: 200 - total flux cleaned = 0.0032808 Jy ! Total flux subtracted in 200 components = 0.0032808 Jy ! Clean residual min=-0.000732 max=0.000761 Jy/beam ! Clean residual mean=0.000000 rms=0.000167 Jy/beam ! Combined flux in latest and established models = 0.041459 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 35 components and 0.041459 Jy ! Inverting map ! Added new window around map position (16.8, 25.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000619256 Jy ! Component: 100 - total flux cleaned = 0.00116347 Jy ! Component: 150 - total flux cleaned = 0.0016719 Jy ! Component: 200 - total flux cleaned = 0.00209607 Jy ! Total flux subtracted in 200 components = 0.00209607 Jy ! Clean residual min=-0.000640 max=0.000615 Jy/beam ! Clean residual mean=0.000000 rms=0.000152 Jy/beam ! Combined flux in latest and established models = 0.0435551 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 54 components and 0.0435551 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.923 mas, bmaj=2.931 mas, bpa=4.23 degrees ! Estimated noise=0.452177 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000379579 Jy ! Component: 100 - total flux cleaned = 0.000798092 Jy ! Component: 150 - total flux cleaned = 0.00119386 Jy ! Component: 200 - total flux cleaned = 0.00155412 Jy ! Total flux subtracted in 200 components = 0.00155412 Jy ! Clean residual min=-0.000595 max=0.000666 Jy/beam ! Clean residual mean=0.000000 rms=0.000161 Jy/beam ! Combined flux in latest and established models = 0.0451092 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000313651 Jy ! Component: 100 - total flux cleaned = 0.000558447 Jy ! Component: 150 - total flux cleaned = 0.000758347 Jy ! Component: 200 - total flux cleaned = 0.000959406 Jy ! Total flux subtracted in 200 components = 0.000959406 Jy ! Clean residual min=-0.000568 max=0.000618 Jy/beam ! Clean residual mean=0.000000 rms=0.000150 Jy/beam ! Combined flux in latest and established models = 0.0460686 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 97 components and 0.0460686 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8481 mas, bmaj=1.915 mas, bpa=3.465 degrees ! Estimated noise=0.349555 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000233023 Jy ! Component: 100 - total flux cleaned = 0.000416585 Jy ! Component: 150 - total flux cleaned = 0.000531013 Jy ! Component: 200 - total flux cleaned = 0.000657057 Jy ! Total flux subtracted in 200 components = 0.000657057 Jy ! Clean residual min=-0.000544 max=0.000538 Jy/beam ! Clean residual mean=0.000000 rms=0.000132 Jy/beam ! Combined flux in latest and established models = 0.0467256 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 113 components and 0.0467256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051162Jy sigma=0.437513 ! Fit after self-cal, rms=0.051166Jy sigma=0.437468 wmodel J1159-0127_X_a_map.mod ! Writing 113 model components to file: J1159-0127_X_a_map.mod wobs J1159-0127_X_a_uvs.fits ! Writing UV FITS file: J1159-0127_X_a_uvs.fits wwins J1159-0127_X_a_map.win ! wwins: Wrote 10 windows to J1159-0127_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.01012e-05 Jy ! Component: 100 - total flux cleaned = -8.6729e-05 Jy ! Component: 150 - total flux cleaned = -9.58206e-05 Jy ! Component: 200 - total flux cleaned = -9.59974e-05 Jy ! Component: 250 - total flux cleaned = -0.000130305 Jy ! Component: 300 - total flux cleaned = -0.000155437 Jy ! Component: 350 - total flux cleaned = -0.00019657 Jy ! Component: 400 - total flux cleaned = -0.000237028 Jy ! Component: 450 - total flux cleaned = -0.000260904 Jy ! Component: 500 - total flux cleaned = -0.000300355 Jy ! Component: 550 - total flux cleaned = -0.000323645 Jy ! Component: 600 - total flux cleaned = -0.000354432 Jy ! Component: 650 - total flux cleaned = -0.000362021 Jy ! Component: 700 - total flux cleaned = -0.000399376 Jy ! Component: 750 - total flux cleaned = -0.000384652 Jy ! Component: 800 - total flux cleaned = -0.000421305 Jy ! Component: 850 - total flux cleaned = -0.000442958 Jy ! Component: 900 - total flux cleaned = -0.000450162 Jy ! Component: 950 - total flux cleaned = -0.000499676 Jy ! Component: 1000 - total flux cleaned = -0.000527697 Jy ! Component: 1050 - total flux cleaned = -0.000541615 Jy ! Component: 1100 - total flux cleaned = -0.000589629 Jy ! Component: 1150 - total flux cleaned = -0.000630366 Jy ! Component: 1200 - total flux cleaned = -0.000670663 Jy ! Component: 1250 - total flux cleaned = -0.000684027 Jy ! Component: 1300 - total flux cleaned = -0.000717122 Jy ! Component: 1350 - total flux cleaned = -0.00073029 Jy ! Component: 1400 - total flux cleaned = -0.000775868 Jy ! Component: 1450 - total flux cleaned = -0.000775853 Jy ! Component: 1500 - total flux cleaned = -0.000814153 Jy ! Component: 1550 - total flux cleaned = -0.000833121 Jy ! Component: 1600 - total flux cleaned = -0.00084563 Jy ! Component: 1650 - total flux cleaned = -0.000889306 Jy ! Component: 1700 - total flux cleaned = -0.000895444 Jy ! Component: 1750 - total flux cleaned = -0.000907723 Jy ! Component: 1800 - total flux cleaned = -0.00093829 Jy ! Component: 1850 - total flux cleaned = -0.000998895 Jy ! Component: 1900 - total flux cleaned = -0.000992714 Jy ! Component: 1950 - total flux cleaned = -0.00101072 Jy ! Component: 2000 - total flux cleaned = -0.00104634 Jy ! Component: 2050 - total flux cleaned = -0.00106406 Jy ! Component: 2100 - total flux cleaned = -0.00108165 Jy ! Component: 2150 - total flux cleaned = -0.00109914 Jy ! Component: 2200 - total flux cleaned = -0.00111073 Jy ! Component: 2250 - total flux cleaned = -0.00114528 Jy ! Component: 2300 - total flux cleaned = -0.00115671 Jy ! Component: 2350 - total flux cleaned = -0.0011794 Jy ! Component: 2400 - total flux cleaned = -0.00119076 Jy ! Component: 2450 - total flux cleaned = -0.00121884 Jy ! Component: 2500 - total flux cleaned = -0.00124116 Jy ! Component: 2550 - total flux cleaned = -0.001269 Jy ! Component: 2600 - total flux cleaned = -0.00129106 Jy ! Component: 2650 - total flux cleaned = -0.00128004 Jy ! Component: 2700 - total flux cleaned = -0.00131284 Jy ! Component: 2750 - total flux cleaned = -0.00132914 Jy ! Component: 2800 - total flux cleaned = -0.00133457 Jy ! Component: 2850 - total flux cleaned = -0.00133456 Jy ! Component: 2900 - total flux cleaned = -0.00136668 Jy ! Component: 2950 - total flux cleaned = -0.00137203 Jy ! Component: 3000 - total flux cleaned = -0.0013826 Jy ! Component: 3050 - total flux cleaned = -0.00139841 Jy ! Component: 3100 - total flux cleaned = -0.00140369 Jy ! Component: 3150 - total flux cleaned = -0.00142456 Jy ! Component: 3200 - total flux cleaned = -0.00142977 Jy ! Component: 3250 - total flux cleaned = -0.00143495 Jy ! Component: 3300 - total flux cleaned = -0.00142984 Jy ! Component: 3350 - total flux cleaned = -0.00145541 Jy ! Component: 3400 - total flux cleaned = -0.0014911 Jy ! Component: 3450 - total flux cleaned = -0.00150119 Jy ! Component: 3500 - total flux cleaned = -0.00152134 Jy ! Component: 3550 - total flux cleaned = -0.00152135 Jy ! Component: 3600 - total flux cleaned = -0.0015613 Jy ! Component: 3650 - total flux cleaned = -0.00156625 Jy ! Component: 3700 - total flux cleaned = -0.00156627 Jy ! Component: 3750 - total flux cleaned = -0.00160075 Jy ! Component: 3800 - total flux cleaned = -0.00161544 Jy ! Component: 3850 - total flux cleaned = -0.00161548 Jy ! Component: 3900 - total flux cleaned = -0.00165439 Jy ! Component: 3950 - total flux cleaned = -0.0016689 Jy ! Component: 4000 - total flux cleaned = -0.00167855 Jy ! Component: 4050 - total flux cleaned = -0.00168335 Jy ! Total flux subtracted in 4096 components = -0.00169294 Jy ! Clean residual min=-0.000262 max=0.000285 Jy/beam ! Clean residual mean=0.000000 rms=0.000084 Jy/beam ! Combined flux in latest and established models = 0.0450327 Jy keep ! Adding 319 model components to the UV plane model. ! The established model now contains 432 components and 0.0450327 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J1159-0127_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8481 x 1.915 at 3.465 degrees (North through East) ! Clean map min=-0.000455 max=0.034072 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J1159-0127_X_a_map.fits wmodel /image_prod/ug002_uvm//J1159-0127_X_a_map.mod ! Writing 432 model components to file: /image_prod/ug002_uvm//J1159-0127_X_a_map.mod wobs /image_prod/ug002_uvm//J1159-0127_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J1159-0127_X_a_uvs.fits wwins /image_prod/ug002_uvm//J1159-0127_X_a_map.win ! wwins: Wrote 11 windows to /image_prod/ug002_uvm//J1159-0127_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.034072 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 8.35795e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.735908 0.735908 1.47182 2.94363 5.88726 11.7745 23.5491 47.0981 94.1962 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.034 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 407.659 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J1159-0127_X_a_dfm.log closed on Wed Mar 4 17:04:56 2020