! Started logfile: /image_prod/ug002_uvm//J1033+071A_X_b_dfm.log on Wed Mar 4 16:57:23 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J1033+071A_X_b_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J1033+071A_X_b_uvm.fits ! AN table 1: 202 integrations on 45 of 45 possible baselines. ! AN table 2: 24 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.954993 visibilities/baseline/integration-bin. ! Found source: J1033+071A ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 114072 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1033+071A_X_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.016777Jy sigma=9.391232 ! Fit after self-cal, rms=0.829703Jy sigma=7.630778 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6939 mas, bmaj=1.639 mas, bpa=-1.384 degrees ! Estimated noise=0.60773 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.124696 Jy ! Component: 100 - total flux cleaned = 0.163192 Jy ! Total flux subtracted in 100 components = 0.163192 Jy ! Clean residual min=-0.005175 max=0.017690 Jy/beam ! Clean residual mean=-0.000003 rms=0.001133 Jy/beam ! Combined flux in latest and established models = 0.163192 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.163192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070608Jy sigma=0.613225 ! Fit after self-cal, rms=0.070542Jy sigma=0.612525 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201657 Jy ! Component: 100 - total flux cleaned = 0.0312438 Jy ! Total flux subtracted in 100 components = 0.0312438 Jy ! Clean residual min=-0.003271 max=0.008748 Jy/beam ! Clean residual mean=-0.000001 rms=0.000768 Jy/beam ! Combined flux in latest and established models = 0.194436 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 11 components and 0.194436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062598Jy sigma=0.529613 ! Fit after self-cal, rms=0.062562Jy sigma=0.529093 ! Inverting map ! Added new window around map position (1.8, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00827675 Jy ! Component: 100 - total flux cleaned = 0.0138119 Jy ! Total flux subtracted in 100 components = 0.0138119 Jy ! Clean residual min=-0.002755 max=0.003464 Jy/beam ! Clean residual mean=-0.000000 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.208248 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 19 components and 0.208248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060869Jy sigma=0.510929 ! Fit after self-cal, rms=0.060811Jy sigma=0.510435 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9015 mas, bmaj=2.006 mas, bpa=-1.749 degrees ! Estimated noise=0.232071 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00722402 Jy ! Component: 100 - total flux cleaned = 0.0113557 Jy ! Component: 150 - total flux cleaned = 0.0140883 Jy ! Component: 200 - total flux cleaned = 0.0159642 Jy ! Total flux subtracted in 200 components = 0.0159642 Jy ! Clean residual min=-0.004325 max=0.003432 Jy/beam ! Clean residual mean=0.000003 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.224212 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 33 components and 0.224212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059905Jy sigma=0.501422 ! Fit after self-cal, rms=0.059836Jy sigma=0.500723 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9015 x 2.006 at -1.749 degrees (North through East) ! Clean map min=-0.0040052 max=0.17003 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 0.92 KP 1.06 ! LA 1.06 MK 1.06 NL 1.06 OV 0.94 ! PT 0.90 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.03 KP 1.02 LA 0.98 ! MK 0.94 NL 1.00 OV 1.04 PT 1.06 ! SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 0.94 KP 1.05 ! LA 1.04 MK 1.08 NL 1.06 OV 0.92 ! PT 0.90 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.02 KP 1.03 LA 1.03 ! MK 0.91 NL 0.96 OV 1.01 PT 1.03 ! SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 0.92 KP 1.05 ! LA 1.05 MK 1.07 NL 1.06 OV 0.93 ! PT 0.91 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.07 KP 1.01 LA 1.04 ! MK 0.94 NL 0.95 OV 1.03 PT 1.00 ! SC 0.90 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 0.93 KP 1.05 ! LA 1.05 MK 1.07 NL 1.06 OV 0.94 ! PT 0.89 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.03 KP 1.05 LA 1.03 ! MK 0.95 NL 0.98 OV 1.04 PT 1.00 ! SC 0.96 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 HN 0.92 KP 1.05 ! LA 1.07 MK 1.07 NL 1.06 OV 0.93 ! PT 0.91 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.04 KP 1.04 LA 1.03 ! MK 0.96 NL 0.91 OV 1.03 PT 1.01 ! SC 0.94 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.92 KP 1.04 ! LA 1.06 MK 1.09 NL 1.05 OV 0.93 ! PT 0.89 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.07 KP 1.03 LA 1.02 ! MK 0.95 NL 0.95 OV 1.00 PT 1.04 ! SC 0.95 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.92 KP 1.05 ! LA 1.06 MK 1.07 NL 1.06 OV 0.93 ! PT 0.90 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.01 KP 1.01 LA 1.05 ! MK 0.90 NL 0.97 OV 1.05 PT 1.04 ! SC 0.97 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 0.92 KP 1.04 ! LA 1.06 MK 1.08 NL 1.05 OV 0.93 ! PT 0.89 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.00 KP 1.04 LA 1.05 ! MK 0.88 NL 0.98 OV 0.94 PT 0.99 ! SC 0.93 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.93 KP 1.05 ! LA 1.05 MK 1.07 NL 1.06 OV 0.92 ! PT 0.90 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.01 KP 1.02 LA 1.04 ! MK 0.98 NL 0.94 OV 1.00 PT 1.06 ! SC 0.93 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 0.91 KP 1.05 ! LA 1.06 MK 1.06 NL 1.04 OV 0.93 ! PT 0.90 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.01 KP 1.02 LA 1.07 ! MK 0.92 NL 0.93 OV 1.03 PT 1.03 ! SC 0.87 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 0.91 KP 1.05 ! LA 1.05 MK 1.07 NL 1.07 OV 0.94 ! PT 0.90 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.03 KP 1.04 LA 0.98 ! MK 0.91 NL 0.96 OV 1.00 PT 0.99 ! SC 0.94 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 0.93 KP 1.05 ! LA 1.05 MK 1.09 NL 1.06 OV 0.93 ! PT 0.89 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.03 KP 1.00 LA 1.04 ! MK 0.87 NL 0.90 OV 1.03 PT 0.97 ! SC 1.03 ! ! ! Fit before self-cal, rms=0.059836Jy sigma=0.500723 ! Fit after self-cal, rms=0.057705Jy sigma=0.482679 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9101 mas, bmaj=2.018 mas, bpa=-1.521 degrees ! Estimated noise=0.231888 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00292124 Jy ! Component: 100 - total flux cleaned = 0.00293281 Jy ! Component: 150 - total flux cleaned = 0.00280657 Jy ! Component: 200 - total flux cleaned = 0.0026498 Jy ! Total flux subtracted in 200 components = 0.0026498 Jy ! Clean residual min=-0.001814 max=0.002157 Jy/beam ! Clean residual mean=0.000001 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.226862 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 49 components and 0.226862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057409Jy sigma=0.480612 ! Fit after self-cal, rms=0.057388Jy sigma=0.480282 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057388Jy sigma=0.480282 ! Fit after self-cal, rms=0.058213Jy sigma=0.470370 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9073 mas, bmaj=2.014 mas, bpa=-1.544 degrees ! Estimated noise=0.232086 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124967 Jy ! Component: 100 - total flux cleaned = 0.00135773 Jy ! Component: 150 - total flux cleaned = 0.00132806 Jy ! Component: 200 - total flux cleaned = 0.00130185 Jy ! Total flux subtracted in 200 components = 0.00130185 Jy ! Clean residual min=-0.000936 max=0.001087 Jy/beam ! Clean residual mean=0.000000 rms=0.000206 Jy/beam ! Combined flux in latest and established models = 0.228164 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 63 components and 0.228164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058169Jy sigma=0.469883 ! Fit after self-cal, rms=0.058208Jy sigma=0.469794 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (15.6, -39.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000860998 Jy ! Component: 100 - total flux cleaned = 0.000970236 Jy ! Component: 150 - total flux cleaned = 0.00104212 Jy ! Component: 200 - total flux cleaned = 0.00104221 Jy ! Total flux subtracted in 200 components = 0.00104221 Jy ! Clean residual min=-0.000877 max=0.000906 Jy/beam ! Clean residual mean=0.000001 rms=0.000193 Jy/beam ! Combined flux in latest and established models = 0.229206 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 75 components and 0.229206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058182Jy sigma=0.469543 ! Fit after self-cal, rms=0.058179Jy sigma=0.469526 ! Inverting map ! Added new window around map position (-1.6, 7.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000403011 Jy ! Component: 100 - total flux cleaned = 0.000516392 Jy ! Component: 150 - total flux cleaned = 0.000437321 Jy ! Component: 200 - total flux cleaned = 0.000419475 Jy ! Total flux subtracted in 200 components = 0.000419475 Jy ! Clean residual min=-0.000831 max=0.000844 Jy/beam ! Clean residual mean=0.000000 rms=0.000186 Jy/beam ! Combined flux in latest and established models = 0.229625 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 88 components and 0.229625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058160Jy sigma=0.469363 ! Fit after self-cal, rms=0.058160Jy sigma=0.469355 ! Inverting map ! Added new window around map position (-11.4, -20.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000684074 Jy ! Component: 100 - total flux cleaned = 0.000747594 Jy ! Component: 150 - total flux cleaned = 0.000764849 Jy ! Component: 200 - total flux cleaned = 0.00076513 Jy ! Total flux subtracted in 200 components = 0.00076513 Jy ! Clean residual min=-0.000784 max=0.000741 Jy/beam ! Clean residual mean=0.000000 rms=0.000176 Jy/beam ! Combined flux in latest and established models = 0.23039 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 99 components and 0.23039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058145Jy sigma=0.469221 ! Fit after self-cal, rms=0.058144Jy sigma=0.469213 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058144Jy sigma=0.469213 ! Fit after self-cal, rms=0.058223Jy sigma=0.468644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9061 mas, bmaj=2.014 mas, bpa=-1.59 degrees ! Estimated noise=0.23184 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000427662 Jy ! Component: 100 - total flux cleaned = 0.000534168 Jy ! Component: 150 - total flux cleaned = 0.000565869 Jy ! Component: 200 - total flux cleaned = 0.000595537 Jy ! Total flux subtracted in 200 components = 0.000595537 Jy ! Clean residual min=-0.000676 max=0.000670 Jy/beam ! Clean residual mean=-0.000000 rms=0.000167 Jy/beam ! Combined flux in latest and established models = 0.230986 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 107 components and 0.230986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058212Jy sigma=0.468548 ! Fit after self-cal, rms=0.058215Jy sigma=0.468538 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.96335e-05 Jy ! Component: 100 - total flux cleaned = 5.57609e-05 Jy ! Component: 150 - total flux cleaned = 2.94416e-05 Jy ! Component: 200 - total flux cleaned = 4.18915e-05 Jy ! Total flux subtracted in 200 components = 4.18915e-05 Jy ! Clean residual min=-0.000651 max=0.000665 Jy/beam ! Clean residual mean=-0.000000 rms=0.000164 Jy/beam ! Combined flux in latest and established models = 0.231028 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 116 components and 0.231028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058208Jy sigma=0.468483 ! Fit after self-cal, rms=0.058207Jy sigma=0.468478 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058207Jy sigma=0.468478 ! Fit after self-cal, rms=0.058199Jy sigma=0.468466 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.129 mas, bmaj=3.123 mas, bpa=-1.137 degrees ! Estimated noise=0.290817 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000321791 Jy ! Component: 100 - total flux cleaned = 0.000453876 Jy ! Component: 150 - total flux cleaned = 0.000545792 Jy ! Component: 200 - total flux cleaned = 0.000619686 Jy ! Total flux subtracted in 200 components = 0.000619686 Jy ! Clean residual min=-0.000989 max=0.000923 Jy/beam ! Clean residual mean=-0.000000 rms=0.000252 Jy/beam ! Combined flux in latest and established models = 0.231647 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 135 components and 0.231647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058198Jy sigma=0.468447 ! Fit after self-cal, rms=0.058199Jy sigma=0.468446 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.1358e-05 Jy ! Component: 100 - total flux cleaned = 9.3889e-05 Jy ! Component: 150 - total flux cleaned = 0.000129745 Jy ! Component: 200 - total flux cleaned = 0.000157822 Jy ! Total flux subtracted in 200 components = 0.000157822 Jy ! Clean residual min=-0.000985 max=0.000922 Jy/beam ! Clean residual mean=-0.000000 rms=0.000250 Jy/beam ! Combined flux in latest and established models = 0.231805 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 153 components and 0.231805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058198Jy sigma=0.468436 ! Fit after self-cal, rms=0.058198Jy sigma=0.468435 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9056 mas, bmaj=2.014 mas, bpa=-1.612 degrees ! Estimated noise=0.231828 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9056 x 2.014 at -1.612 degrees (North through East) ! Clean map min=-0.00061929 max=0.16911 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6937 mas, bmaj=1.637 mas, bpa=-1.132 degrees ! Estimated noise=0.594269 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.121814 Jy ! Component: 100 - total flux cleaned = 0.160616 Jy ! Component: 150 - total flux cleaned = 0.180602 Jy ! Component: 200 - total flux cleaned = 0.192559 Jy ! Total flux subtracted in 200 components = 0.192559 Jy ! Clean residual min=-0.002762 max=0.006347 Jy/beam ! Clean residual mean=-0.000003 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.192559 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.192559 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9056 mas, bmaj=2.014 mas, bpa=-1.612 degrees ! Estimated noise=0.231828 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133289 Jy ! Component: 100 - total flux cleaned = 0.0210889 Jy ! Component: 150 - total flux cleaned = 0.0260246 Jy ! Component: 200 - total flux cleaned = 0.0292566 Jy ! Total flux subtracted in 200 components = 0.0292566 Jy ! Clean residual min=-0.001042 max=0.001750 Jy/beam ! Clean residual mean=-0.000002 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 0.221816 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 31 components and 0.221816 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021784 Jy ! Component: 100 - total flux cleaned = 0.00370214 Jy ! Component: 150 - total flux cleaned = 0.00485147 Jy ! Component: 200 - total flux cleaned = 0.00569634 Jy ! Total flux subtracted in 200 components = 0.00569634 Jy ! Clean residual min=-0.000801 max=0.000768 Jy/beam ! Clean residual mean=-0.000001 rms=0.000190 Jy/beam ! Combined flux in latest and established models = 0.227512 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 58 components and 0.227512 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.129 mas, bmaj=3.123 mas, bpa=-1.137 degrees ! Estimated noise=0.290817 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118871 Jy ! Component: 100 - total flux cleaned = 0.00195324 Jy ! Component: 150 - total flux cleaned = 0.00254875 Jy ! Component: 200 - total flux cleaned = 0.00303583 Jy ! Total flux subtracted in 200 components = 0.00303583 Jy ! Clean residual min=-0.000973 max=0.000946 Jy/beam ! Clean residual mean=-0.000001 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 0.230548 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000403408 Jy ! Component: 100 - total flux cleaned = 0.000739285 Jy ! Component: 150 - total flux cleaned = 0.000900038 Jy ! Component: 200 - total flux cleaned = 0.00101134 Jy ! Total flux subtracted in 200 components = 0.00101134 Jy ! Clean residual min=-0.000959 max=0.000951 Jy/beam ! Clean residual mean=-0.000001 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.231559 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 116 components and 0.231559 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9056 mas, bmaj=2.014 mas, bpa=-1.612 degrees ! Estimated noise=0.231828 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000275042 Jy ! Component: 100 - total flux cleaned = -0.000135011 Jy ! Component: 150 - total flux cleaned = -4.49805e-05 Jy ! Component: 200 - total flux cleaned = 5.36469e-05 Jy ! Total flux subtracted in 200 components = 5.36469e-05 Jy ! Clean residual min=-0.000669 max=0.000711 Jy/beam ! Clean residual mean=-0.000000 rms=0.000163 Jy/beam ! Combined flux in latest and established models = 0.231613 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 130 components and 0.231613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058198Jy sigma=0.468489 ! Fit after self-cal, rms=0.058193Jy sigma=0.468438 wmodel J1033+071A_X_b_map.mod ! Writing 130 model components to file: J1033+071A_X_b_map.mod wobs J1033+071A_X_b_uvs.fits ! Writing UV FITS file: J1033+071A_X_b_uvs.fits wwins J1033+071A_X_b_map.win ! wwins: Wrote 7 windows to J1033+071A_X_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -3.88269e-05 Jy ! Component: 100 - total flux cleaned = -0.000108698 Jy ! Component: 150 - total flux cleaned = -0.00011969 Jy ! Component: 200 - total flux cleaned = -0.000130341 Jy ! Component: 250 - total flux cleaned = -0.000120225 Jy ! Component: 300 - total flux cleaned = -0.000130475 Jy ! Component: 350 - total flux cleaned = -0.000100826 Jy ! Component: 400 - total flux cleaned = -7.20132e-05 Jy ! Component: 450 - total flux cleaned = -7.20388e-05 Jy ! Component: 500 - total flux cleaned = -9.96175e-05 Jy ! Component: 550 - total flux cleaned = -5.41947e-05 Jy ! Component: 600 - total flux cleaned = -3.63897e-05 Jy ! Component: 650 - total flux cleaned = -1.87272e-05 Jy ! Component: 700 - total flux cleaned = -1.20411e-06 Jy ! Component: 750 - total flux cleaned = 3.30051e-05 Jy ! Component: 800 - total flux cleaned = 4.14825e-05 Jy ! Component: 850 - total flux cleaned = 5.82183e-05 Jy ! Component: 900 - total flux cleaned = 8.29084e-05 Jy ! Component: 950 - total flux cleaned = 7.46945e-05 Jy ! Component: 1000 - total flux cleaned = 9.08018e-05 Jy ! Component: 1050 - total flux cleaned = 0.000106701 Jy ! Component: 1100 - total flux cleaned = 0.000114489 Jy ! Component: 1150 - total flux cleaned = 0.000114424 Jy ! Component: 1200 - total flux cleaned = 0.000137633 Jy ! Component: 1250 - total flux cleaned = 0.000122262 Jy ! Component: 1300 - total flux cleaned = 0.000129896 Jy ! Component: 1350 - total flux cleaned = 0.000159889 Jy ! Component: 1400 - total flux cleaned = 0.000144979 Jy ! Component: 1450 - total flux cleaned = 0.000167107 Jy ! Component: 1500 - total flux cleaned = 0.000145158 Jy ! Component: 1550 - total flux cleaned = 0.000130746 Jy ! Component: 1600 - total flux cleaned = 0.000159552 Jy ! Component: 1650 - total flux cleaned = 0.000159519 Jy ! Component: 1700 - total flux cleaned = 0.000202037 Jy ! Component: 1750 - total flux cleaned = 0.000216022 Jy ! Component: 1800 - total flux cleaned = 0.000216052 Jy ! Component: 1850 - total flux cleaned = 0.000222996 Jy ! Component: 1900 - total flux cleaned = 0.000271018 Jy ! Component: 1950 - total flux cleaned = 0.000264232 Jy ! Component: 2000 - total flux cleaned = 0.00026424 Jy ! Component: 2050 - total flux cleaned = 0.000257563 Jy ! Component: 2100 - total flux cleaned = 0.000264324 Jy ! Component: 2150 - total flux cleaned = 0.000297429 Jy ! Component: 2200 - total flux cleaned = 0.000284206 Jy ! Component: 2250 - total flux cleaned = 0.000323496 Jy ! Component: 2300 - total flux cleaned = 0.000316947 Jy ! Component: 2350 - total flux cleaned = 0.000316876 Jy ! Component: 2400 - total flux cleaned = 0.000355387 Jy ! Component: 2450 - total flux cleaned = 0.000342564 Jy ! Component: 2500 - total flux cleaned = 0.000367898 Jy ! Component: 2550 - total flux cleaned = 0.000355215 Jy ! Component: 2600 - total flux cleaned = 0.000386508 Jy ! Component: 2650 - total flux cleaned = 0.000392712 Jy ! Component: 2700 - total flux cleaned = 0.000392651 Jy ! Component: 2750 - total flux cleaned = 0.000411123 Jy ! Component: 2800 - total flux cleaned = 0.000392731 Jy ! Component: 2850 - total flux cleaned = 0.000410985 Jy ! Component: 2900 - total flux cleaned = 0.000398887 Jy ! Component: 2950 - total flux cleaned = 0.00041702 Jy ! Component: 3000 - total flux cleaned = 0.000405016 Jy ! Component: 3050 - total flux cleaned = 0.000422922 Jy ! Component: 3100 - total flux cleaned = 0.000446618 Jy ! Component: 3150 - total flux cleaned = 0.000440683 Jy ! Component: 3200 - total flux cleaned = 0.000475875 Jy ! Component: 3250 - total flux cleaned = 0.000452558 Jy ! Component: 3300 - total flux cleaned = 0.000481591 Jy ! Component: 3350 - total flux cleaned = 0.000469956 Jy ! Component: 3400 - total flux cleaned = 0.000464223 Jy ! Component: 3450 - total flux cleaned = 0.000492851 Jy ! Component: 3500 - total flux cleaned = 0.000498566 Jy ! Component: 3550 - total flux cleaned = 0.000498564 Jy ! Component: 3600 - total flux cleaned = 0.000504192 Jy ! Component: 3650 - total flux cleaned = 0.000549116 Jy ! Component: 3700 - total flux cleaned = 0.000521107 Jy ! Component: 3750 - total flux cleaned = 0.00052669 Jy ! Component: 3800 - total flux cleaned = 0.000521156 Jy ! Component: 3850 - total flux cleaned = 0.000543299 Jy ! Component: 3900 - total flux cleaned = 0.000521263 Jy ! Component: 3950 - total flux cleaned = 0.000543188 Jy ! Component: 4000 - total flux cleaned = 0.000575882 Jy ! Component: 4050 - total flux cleaned = 0.000559598 Jy ! Total flux subtracted in 4096 components = 0.000554235 Jy ! Clean residual min=-0.000338 max=0.000329 Jy/beam ! Clean residual mean=0.000000 rms=0.000098 Jy/beam ! Combined flux in latest and established models = 0.232167 Jy keep ! Adding 335 model components to the UV plane model. ! The established model now contains 465 components and 0.232167 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J1033+071A_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9056 x 2.014 at -1.612 degrees (North through East) ! Clean map min=-0.00055668 max=0.1688 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J1033+071A_X_b_map.fits wmodel /image_prod/ug002_uvm//J1033+071A_X_b_map.mod ! Writing 465 model components to file: /image_prod/ug002_uvm//J1033+071A_X_b_map.mod wobs /image_prod/ug002_uvm//J1033+071A_X_b_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J1033+071A_X_b_uvs.fits wwins /image_prod/ug002_uvm//J1033+071A_X_b_map.win ! wwins: Wrote 8 windows to /image_prod/ug002_uvm//J1033+071A_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.168799 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 9.80644e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.174286 0.174286 0.348572 0.697144 1.39429 2.78858 5.57716 11.1543 22.3086 44.6172 89.2345 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.168 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1721.31 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J1033+071A_X_b_dfm.log closed on Wed Mar 4 16:57:33 2020