! Started logfile: /image_prod/ug002_uvm//J1012+0630_X_a_dfm.log on Wed Mar 4 16:55:28 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J1012+0630_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J1012+0630_X_a_uvm.fits ! AN table 1: 60 integrations on 21 of 21 possible baselines. ! AN table 2: 80 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.891429 visibilities/baseline/integration-bin. ! Found source: J1012+0630 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 37440 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1012+0630_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 62 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 62 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 62 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 62 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 62 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 62 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 62 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 62 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 62 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 62 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 62 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 62 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.005023Jy sigma=9.267258 ! Fit after self-cal, rms=0.902263Jy sigma=8.314365 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7469 mas, bmaj=1.636 mas, bpa=7.623 degrees ! Estimated noise=0.773308 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.074858 Jy ! Component: 100 - total flux cleaned = 0.0917403 Jy ! Total flux subtracted in 100 components = 0.0917403 Jy ! Clean residual min=-0.003860 max=0.006316 Jy/beam ! Clean residual mean=-0.000000 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.0917403 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0917403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054755Jy sigma=0.474239 ! Fit after self-cal, rms=0.054689Jy sigma=0.473740 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0069989 Jy ! Component: 100 - total flux cleaned = 0.0109278 Jy ! Total flux subtracted in 100 components = 0.0109278 Jy ! Clean residual min=-0.003114 max=0.004982 Jy/beam ! Clean residual mean=-0.000001 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.102668 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 10 components and 0.102668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053570Jy sigma=0.462382 ! Fit after self-cal, rms=0.053573Jy sigma=0.462275 ! Inverting map ! Added new window around map position (2.6, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00462289 Jy ! Component: 100 - total flux cleaned = 0.00720808 Jy ! Total flux subtracted in 100 components = 0.00720808 Jy ! Clean residual min=-0.002425 max=0.003346 Jy/beam ! Clean residual mean=-0.000001 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.109876 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 16 components and 0.109876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053104Jy sigma=0.457296 ! Fit after self-cal, rms=0.053056Jy sigma=0.456972 ! Inverting map ! Added new window around map position (4, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00328506 Jy ! Component: 100 - total flux cleaned = 0.00543517 Jy ! Total flux subtracted in 100 components = 0.00543517 Jy ! Clean residual min=-0.002221 max=0.002591 Jy/beam ! Clean residual mean=-0.000001 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.115311 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 26 components and 0.115311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052762Jy sigma=0.453711 ! Fit after self-cal, rms=0.052736Jy sigma=0.453535 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9465 mas, bmaj=1.985 mas, bpa=10.5 degrees ! Estimated noise=0.404064 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00325807 Jy ! Component: 100 - total flux cleaned = 0.00542193 Jy ! Component: 150 - total flux cleaned = 0.00710714 Jy ! Component: 200 - total flux cleaned = 0.00846434 Jy ! Total flux subtracted in 200 components = 0.00846434 Jy ! Clean residual min=-0.001756 max=0.002625 Jy/beam ! Clean residual mean=-0.000000 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.123776 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 47 components and 0.123776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052498Jy sigma=0.450855 ! Fit after self-cal, rms=0.052462Jy sigma=0.450536 ! Inverting map ! Added new window around map position (5.4, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00239453 Jy ! Component: 100 - total flux cleaned = 0.00382964 Jy ! Component: 150 - total flux cleaned = 0.00495726 Jy ! Component: 200 - total flux cleaned = 0.00590826 Jy ! Total flux subtracted in 200 components = 0.00590826 Jy ! Clean residual min=-0.001592 max=0.002026 Jy/beam ! Clean residual mean=-0.000000 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.129684 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 72 components and 0.129684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052333Jy sigma=0.449225 ! Fit after self-cal, rms=0.052321Jy sigma=0.449121 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9465 x 1.985 at 10.5 degrees (North through East) ! Clean map min=-0.0015507 max=0.098725 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 KP 1.05 LA 1.07 MK 0.97 ! NL 1.12 OV 0.90 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.00 HN 1.04 KP 1.02 ! NL 0.98 OV 0.97 PT 1.01 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 KP 1.05 LA 1.02 MK 1.02 ! NL 1.17 OV 0.89 SC 1.08 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.00 HN 1.04 KP 0.99 ! NL 0.98 OV 0.98 PT 0.99 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 KP 1.05 LA 1.05 MK 0.99 ! NL 1.18 OV 0.90 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.02 HN 1.05 KP 1.02 ! NL 0.95 OV 0.98 PT 1.02 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 KP 1.07 LA 1.05 MK 0.99 ! NL 1.15 OV 0.97 SC 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.99 HN 1.04 KP 1.01 ! NL 0.98 OV 0.98 PT 0.99 SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 KP 1.06 LA 1.04 MK 0.99 ! NL 1.12 OV 0.89 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.02 HN 1.05 KP 0.99 ! NL 0.95 OV 1.00 PT 0.98 SC 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 KP 1.05 LA 1.00 MK 1.01 ! NL 1.14 OV 0.91 SC 1.09 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.00 HN 1.05 KP 1.00 ! NL 0.97 OV 0.98 PT 1.00 SC 0.95 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 KP 0.98 LA 1.10 MK 1.01 ! NL 1.17 OV 0.92 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.00 HN 1.06 KP 1.02 ! NL 0.94 OV 0.99 PT 1.01 SC 0.97 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 KP 1.05 LA 1.03 MK 1.02 ! NL 1.19 OV 0.91 SC 1.09 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.01 HN 1.03 KP 1.02 ! NL 0.94 OV 1.00 PT 1.01 SC 0.97 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 KP 1.02 LA 1.04 MK 1.04 ! NL 1.15 OV 0.89 SC 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.01 HN 1.04 KP 1.01 ! NL 0.97 OV 0.99 PT 1.00 SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 KP 1.10 LA 1.06 MK 1.03 ! NL 1.18 OV 0.91 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.01 HN 1.07 KP 0.99 ! NL 0.97 OV 0.97 PT 0.98 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 KP 0.97 LA 1.04 MK 1.03 ! NL 1.15 OV 0.92 SC 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.01 HN 1.05 KP 1.01 ! NL 0.96 OV 0.98 PT 0.97 SC 0.96 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 KP 1.01 LA 1.06 MK 1.05 ! NL 1.13 OV 0.93 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.00 HN 1.07 KP 0.99 ! NL 0.96 OV 0.97 PT 0.99 SC 0.94 ! ! ! Fit before self-cal, rms=0.052321Jy sigma=0.449121 ! Fit after self-cal, rms=0.052073Jy sigma=0.445267 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9509 mas, bmaj=1.995 mas, bpa=11.2 degrees ! Estimated noise=0.403197 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109894 Jy ! Component: 100 - total flux cleaned = 0.00172192 Jy ! Component: 150 - total flux cleaned = 0.00225153 Jy ! Component: 200 - total flux cleaned = 0.00261868 Jy ! Total flux subtracted in 200 components = 0.00261868 Jy ! Clean residual min=-0.001082 max=0.001098 Jy/beam ! Clean residual mean=-0.000000 rms=0.000262 Jy/beam ! Combined flux in latest and established models = 0.132303 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 91 components and 0.132303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052033Jy sigma=0.444834 ! Fit after self-cal, rms=0.052063Jy sigma=0.444716 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052063Jy sigma=0.444716 ! Fit after self-cal, rms=0.052005Jy sigma=0.443676 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9502 mas, bmaj=1.994 mas, bpa=11.22 degrees ! Estimated noise=0.402764 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000228116 Jy ! Component: 100 - total flux cleaned = 0.000386242 Jy ! Component: 150 - total flux cleaned = 0.000591225 Jy ! Component: 200 - total flux cleaned = 0.000713319 Jy ! Total flux subtracted in 200 components = 0.000713319 Jy ! Clean residual min=-0.000844 max=0.000915 Jy/beam ! Clean residual mean=-0.000000 rms=0.000210 Jy/beam ! Combined flux in latest and established models = 0.133016 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 105 components and 0.133016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051992Jy sigma=0.443555 ! Fit after self-cal, rms=0.051999Jy sigma=0.443535 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.2, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000186865 Jy ! Component: 100 - total flux cleaned = -1.17205e-05 Jy ! Component: 150 - total flux cleaned = -0.000186926 Jy ! Component: 200 - total flux cleaned = -0.000140094 Jy ! Total flux subtracted in 200 components = -0.000140094 Jy ! Clean residual min=-0.000810 max=0.000832 Jy/beam ! Clean residual mean=-0.000000 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.132876 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 121 components and 0.132876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051975Jy sigma=0.443333 ! Fit after self-cal, rms=0.051975Jy sigma=0.443315 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051975Jy sigma=0.443315 ! Fit after self-cal, rms=0.051983Jy sigma=0.442602 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9486 mas, bmaj=1.993 mas, bpa=11.24 degrees ! Estimated noise=0.402731 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00016218 Jy ! Component: 100 - total flux cleaned = 0.00021237 Jy ! Component: 150 - total flux cleaned = 0.000314871 Jy ! Component: 200 - total flux cleaned = 0.000410288 Jy ! Total flux subtracted in 200 components = 0.000410288 Jy ! Clean residual min=-0.000694 max=0.000879 Jy/beam ! Clean residual mean=0.000000 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 0.133286 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 138 components and 0.133286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051973Jy sigma=0.442516 ! Fit after self-cal, rms=0.051978Jy sigma=0.442499 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9, 25.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000656437 Jy ! Component: 100 - total flux cleaned = 0.000838833 Jy ! Component: 150 - total flux cleaned = 0.00104191 Jy ! Component: 200 - total flux cleaned = 0.00112142 Jy ! Total flux subtracted in 200 components = 0.00112142 Jy ! Clean residual min=-0.000652 max=0.000732 Jy/beam ! Clean residual mean=-0.000000 rms=0.000162 Jy/beam ! Combined flux in latest and established models = 0.134408 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 159 components and 0.134408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051963Jy sigma=0.442362 ! Fit after self-cal, rms=0.051961Jy sigma=0.442353 ! Inverting map ! Added new window around map position (-49.2, 25). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000627117 Jy ! Component: 100 - total flux cleaned = 0.000912522 Jy ! Component: 150 - total flux cleaned = 0.0010658 Jy ! Component: 200 - total flux cleaned = 0.00117328 Jy ! Total flux subtracted in 200 components = 0.00117328 Jy ! Clean residual min=-0.000632 max=0.000643 Jy/beam ! Clean residual mean=-0.000000 rms=0.000155 Jy/beam ! Combined flux in latest and established models = 0.135581 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 176 components and 0.135581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051951Jy sigma=0.442262 ! Fit after self-cal, rms=0.051949Jy sigma=0.442256 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051949Jy sigma=0.442256 ! Fit after self-cal, rms=0.051904Jy sigma=0.442234 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.043 mas, bmaj=2.879 mas, bpa=1.276 degrees ! Estimated noise=0.493244 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000440402 Jy ! Component: 100 - total flux cleaned = 0.000633638 Jy ! Component: 150 - total flux cleaned = 0.000761994 Jy ! Component: 200 - total flux cleaned = 0.000842424 Jy ! Total flux subtracted in 200 components = 0.000842424 Jy ! Clean residual min=-0.000703 max=0.000630 Jy/beam ! Clean residual mean=-0.000000 rms=0.000169 Jy/beam ! Combined flux in latest and established models = 0.136423 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 198 components and 0.136423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051900Jy sigma=0.442198 ! Fit after self-cal, rms=0.051900Jy sigma=0.442194 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136371 Jy ! Component: 100 - total flux cleaned = 0.000206678 Jy ! Component: 150 - total flux cleaned = 0.000278527 Jy ! Component: 200 - total flux cleaned = 0.000344252 Jy ! Total flux subtracted in 200 components = 0.000344252 Jy ! Clean residual min=-0.000650 max=0.000616 Jy/beam ! Clean residual mean=-0.000000 rms=0.000166 Jy/beam ! Combined flux in latest and established models = 0.136767 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 209 components and 0.136768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051898Jy sigma=0.442181 ! Fit after self-cal, rms=0.051898Jy sigma=0.442180 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9476 mas, bmaj=1.992 mas, bpa=11.25 degrees ! Estimated noise=0.402378 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9476 x 1.992 at 11.25 degrees (North through East) ! Clean map min=-0.00060442 max=0.098499 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7501 mas, bmaj=1.64 mas, bpa=8.543 degrees ! Estimated noise=0.774547 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0748692 Jy ! Component: 100 - total flux cleaned = 0.0918908 Jy ! Component: 150 - total flux cleaned = 0.0995344 Jy ! Component: 200 - total flux cleaned = 0.104711 Jy ! Total flux subtracted in 200 components = 0.104711 Jy ! Clean residual min=-0.001916 max=0.002901 Jy/beam ! Clean residual mean=-0.000001 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.104711 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.104711 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9476 mas, bmaj=1.992 mas, bpa=11.25 degrees ! Estimated noise=0.402378 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00603077 Jy ! Component: 100 - total flux cleaned = 0.0103111 Jy ! Component: 150 - total flux cleaned = 0.0135593 Jy ! Component: 200 - total flux cleaned = 0.0160921 Jy ! Total flux subtracted in 200 components = 0.0160921 Jy ! Clean residual min=-0.001318 max=0.001512 Jy/beam ! Clean residual mean=-0.000000 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.120803 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 56 components and 0.120803 Jy ! Inverting map ! Added new window around map position (50, 18.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203494 Jy ! Component: 100 - total flux cleaned = 0.00368894 Jy ! Component: 150 - total flux cleaned = 0.00507593 Jy ! Component: 200 - total flux cleaned = 0.00628077 Jy ! Total flux subtracted in 200 components = 0.00628077 Jy ! Clean residual min=-0.000934 max=0.000945 Jy/beam ! Clean residual mean=0.000000 rms=0.000247 Jy/beam ! Combined flux in latest and established models = 0.127084 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 87 components and 0.127084 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.043 mas, bmaj=2.879 mas, bpa=1.276 degrees ! Estimated noise=0.493244 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180819 Jy ! Component: 100 - total flux cleaned = 0.00316899 Jy ! Component: 150 - total flux cleaned = 0.00430255 Jy ! Component: 200 - total flux cleaned = 0.00525931 Jy ! Total flux subtracted in 200 components = 0.00525931 Jy ! Clean residual min=-0.001074 max=0.000953 Jy/beam ! Clean residual mean=-0.000000 rms=0.000265 Jy/beam ! Combined flux in latest and established models = 0.132343 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000725407 Jy ! Component: 100 - total flux cleaned = 0.00124507 Jy ! Component: 150 - total flux cleaned = 0.00165334 Jy ! Component: 200 - total flux cleaned = 0.00199541 Jy ! Total flux subtracted in 200 components = 0.00199541 Jy ! Clean residual min=-0.000915 max=0.000754 Jy/beam ! Clean residual mean=-0.000000 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.134339 Jy ! Adding 130 model components to the UV plane model. ! The established model now contains 199 components and 0.134339 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9476 mas, bmaj=1.992 mas, bpa=11.25 degrees ! Estimated noise=0.402378 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000423309 Jy ! Component: 100 - total flux cleaned = 0.000701841 Jy ! Component: 150 - total flux cleaned = 0.000889333 Jy ! Component: 200 - total flux cleaned = 0.00107713 Jy ! Total flux subtracted in 200 components = 0.00107713 Jy ! Clean residual min=-0.000660 max=0.000695 Jy/beam ! Clean residual mean=-0.000000 rms=0.000159 Jy/beam ! Combined flux in latest and established models = 0.135416 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 225 components and 0.135416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051904Jy sigma=0.442268 ! Fit after self-cal, rms=0.051898Jy sigma=0.442217 wmodel J1012+0630_X_a_map.mod ! Writing 225 model components to file: J1012+0630_X_a_map.mod wobs J1012+0630_X_a_uvs.fits ! Writing UV FITS file: J1012+0630_X_a_uvs.fits wwins J1012+0630_X_a_map.win ! wwins: Wrote 8 windows to J1012+0630_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -9.59465e-05 Jy ! Component: 100 - total flux cleaned = -0.000162814 Jy ! Component: 150 - total flux cleaned = -0.000194948 Jy ! Component: 200 - total flux cleaned = -0.000195209 Jy ! Component: 250 - total flux cleaned = -0.000195528 Jy ! Component: 300 - total flux cleaned = -0.000215503 Jy ! Component: 350 - total flux cleaned = -0.000215428 Jy ! Component: 400 - total flux cleaned = -0.00021513 Jy ! Component: 450 - total flux cleaned = -0.000214882 Jy ! Component: 500 - total flux cleaned = -0.000187473 Jy ! Component: 550 - total flux cleaned = -0.000169596 Jy ! Component: 600 - total flux cleaned = -0.000160793 Jy ! Component: 650 - total flux cleaned = -0.000134522 Jy ! Component: 700 - total flux cleaned = -0.000117265 Jy ! Component: 750 - total flux cleaned = -9.17969e-05 Jy ! Component: 800 - total flux cleaned = -5.84481e-05 Jy ! Component: 850 - total flux cleaned = -3.37497e-05 Jy ! Component: 900 - total flux cleaned = -2.55956e-05 Jy ! Component: 950 - total flux cleaned = 6.44677e-06 Jy ! Component: 1000 - total flux cleaned = -1.74176e-05 Jy ! Component: 1050 - total flux cleaned = -1.79147e-06 Jy ! Component: 1100 - total flux cleaned = -1.73689e-05 Jy ! Component: 1150 - total flux cleaned = -4.03521e-05 Jy ! Component: 1200 - total flux cleaned = -2.51026e-05 Jy ! Component: 1250 - total flux cleaned = -3.27056e-05 Jy ! Component: 1300 - total flux cleaned = -6.99412e-05 Jy ! Component: 1350 - total flux cleaned = -4.04221e-05 Jy ! Component: 1400 - total flux cleaned = -5.50948e-05 Jy ! Component: 1450 - total flux cleaned = -6.95822e-05 Jy ! Component: 1500 - total flux cleaned = -6.94934e-05 Jy ! Component: 1550 - total flux cleaned = -6.24117e-05 Jy ! Component: 1600 - total flux cleaned = -6.94085e-05 Jy ! Component: 1650 - total flux cleaned = -7.64199e-05 Jy ! Component: 1700 - total flux cleaned = -6.2469e-05 Jy ! Component: 1750 - total flux cleaned = -4.87106e-05 Jy ! Component: 1800 - total flux cleaned = -4.19648e-05 Jy ! Component: 1850 - total flux cleaned = -4.20082e-05 Jy ! Component: 1900 - total flux cleaned = -2.85503e-05 Jy ! Component: 1950 - total flux cleaned = 1.1599e-05 Jy ! Component: 2000 - total flux cleaned = 1.8287e-05 Jy ! Component: 2050 - total flux cleaned = 3.80477e-05 Jy ! Component: 2100 - total flux cleaned = 4.46481e-05 Jy ! Component: 2150 - total flux cleaned = 5.76062e-05 Jy ! Component: 2200 - total flux cleaned = 7.05723e-05 Jy ! Component: 2250 - total flux cleaned = 8.98519e-05 Jy ! Component: 2300 - total flux cleaned = 0.000102497 Jy ! Component: 2350 - total flux cleaned = 0.000127853 Jy ! Component: 2400 - total flux cleaned = 0.000121488 Jy ! Component: 2450 - total flux cleaned = 0.000140309 Jy ! Component: 2500 - total flux cleaned = 0.000171424 Jy ! Component: 2550 - total flux cleaned = 0.000183815 Jy ! Component: 2600 - total flux cleaned = 0.000208391 Jy ! Component: 2650 - total flux cleaned = 0.000202303 Jy ! Component: 2700 - total flux cleaned = 0.000220572 Jy ! Component: 2750 - total flux cleaned = 0.000196425 Jy ! Component: 2800 - total flux cleaned = 0.00023837 Jy ! Component: 2850 - total flux cleaned = 0.00021452 Jy ! Component: 2900 - total flux cleaned = 0.000220484 Jy ! Component: 2950 - total flux cleaned = 0.000232279 Jy ! Component: 3000 - total flux cleaned = 0.000232298 Jy ! Component: 3050 - total flux cleaned = 0.000273164 Jy ! Component: 3100 - total flux cleaned = 0.000244075 Jy ! Component: 3150 - total flux cleaned = 0.000255601 Jy ! Component: 3200 - total flux cleaned = 0.000255591 Jy ! Component: 3250 - total flux cleaned = 0.000272752 Jy ! Component: 3300 - total flux cleaned = 0.000272739 Jy ! Component: 3350 - total flux cleaned = 0.000278349 Jy ! Component: 3400 - total flux cleaned = 0.000289645 Jy ! Component: 3450 - total flux cleaned = 0.000312108 Jy ! Component: 3500 - total flux cleaned = 0.000289805 Jy ! Component: 3550 - total flux cleaned = 0.000300941 Jy ! Component: 3600 - total flux cleaned = 0.00031752 Jy ! Component: 3650 - total flux cleaned = 0.00031206 Jy ! Component: 3700 - total flux cleaned = 0.000339397 Jy ! Component: 3750 - total flux cleaned = 0.000344864 Jy ! Component: 3800 - total flux cleaned = 0.00035567 Jy ! Component: 3850 - total flux cleaned = 0.000377211 Jy ! Component: 3900 - total flux cleaned = 0.00038256 Jy ! Component: 3950 - total flux cleaned = 0.000387904 Jy ! Component: 4000 - total flux cleaned = 0.000382555 Jy ! Component: 4050 - total flux cleaned = 0.000403716 Jy ! Total flux subtracted in 4096 components = 0.000398451 Jy ! Clean residual min=-0.000310 max=0.000355 Jy/beam ! Clean residual mean=-0.000000 rms=0.000091 Jy/beam ! Combined flux in latest and established models = 0.135814 Jy keep ! Adding 307 model components to the UV plane model. ! The established model now contains 532 components and 0.135814 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J1012+0630_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9476 x 1.992 at 11.25 degrees (North through East) ! Clean map min=-0.00051128 max=0.098961 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J1012+0630_X_a_map.fits wmodel /image_prod/ug002_uvm//J1012+0630_X_a_map.mod ! Writing 532 model components to file: /image_prod/ug002_uvm//J1012+0630_X_a_map.mod wobs /image_prod/ug002_uvm//J1012+0630_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J1012+0630_X_a_uvs.fits wwins /image_prod/ug002_uvm//J1012+0630_X_a_map.win ! wwins: Wrote 9 windows to /image_prod/ug002_uvm//J1012+0630_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0989609 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 9.11369e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.276282 0.276282 0.552563 1.10513 2.21025 4.4205 8.84101 17.682 35.364 70.7281 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.098 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1085.85 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J1012+0630_X_a_dfm.log closed on Wed Mar 4 16:55:35 2020