! Started logfile: /image_prod/ug002_uvm//J0830+2410_X_a_dfm.log on Wed Mar 4 16:52:08 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J0830+2410_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J0830+2410_X_a_uvm.fits ! AN table 1: 6 integrations on 36 of 36 possible baselines. ! AN table 2: 6 integrations on 28 of 28 possible baselines. ! AN table 3: 6 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.857798 visibilities/baseline/integration-bin. ! Found source: J0830+2410 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 6732 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0830+2410_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.315663Jy sigma=14.664025 ! Fit after self-cal, rms=0.236285Jy sigma=2.618948 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7497 mas, bmaj=2.15 mas, bpa=-18.26 degrees ! Estimated noise=1.17112 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.632371 Jy ! Component: 100 - total flux cleaned = 0.773321 Jy ! Total flux subtracted in 100 components = 0.773321 Jy ! Clean residual min=-0.030755 max=0.050227 Jy/beam ! Clean residual mean=0.000008 rms=0.007570 Jy/beam ! Combined flux in latest and established models = 0.773321 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.773321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.178303Jy sigma=1.956063 ! Fit after self-cal, rms=0.178302Jy sigma=1.956032 ! Inverting map ! Added new window around map position (-1.8, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.057905 Jy ! Component: 100 - total flux cleaned = 0.0939666 Jy ! Total flux subtracted in 100 components = 0.0939666 Jy ! Clean residual min=-0.028275 max=0.045748 Jy/beam ! Clean residual mean=0.000009 rms=0.006406 Jy/beam ! Combined flux in latest and established models = 0.867288 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 15 components and 0.867288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.153005Jy sigma=1.680737 ! Fit after self-cal, rms=0.152299Jy sigma=1.672804 ! Inverting map ! Added new window around map position (1.8, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0362218 Jy ! Component: 100 - total flux cleaned = 0.0556252 Jy ! Total flux subtracted in 100 components = 0.0556252 Jy ! Clean residual min=-0.030890 max=0.031960 Jy/beam ! Clean residual mean=0.000009 rms=0.005859 Jy/beam ! Combined flux in latest and established models = 0.922913 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 19 components and 0.922913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.141063Jy sigma=1.551026 ! Fit after self-cal, rms=0.140875Jy sigma=1.548343 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.972 mas, bmaj=2.337 mas, bpa=-15.9 degrees ! Estimated noise=0.808882 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0187076 Jy ! Component: 100 - total flux cleaned = 0.02627 Jy ! Component: 150 - total flux cleaned = 0.0325422 Jy ! Component: 200 - total flux cleaned = 0.0383391 Jy ! Total flux subtracted in 200 components = 0.0383391 Jy ! Clean residual min=-0.027107 max=0.028330 Jy/beam ! Clean residual mean=0.000013 rms=0.006500 Jy/beam ! Combined flux in latest and established models = 0.961252 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 36 components and 0.961252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.134663Jy sigma=1.486310 ! Fit after self-cal, rms=0.134450Jy sigma=1.483070 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.972 x 2.337 at -15.9 degrees (North through East) ! Clean map min=-0.025264 max=0.81515 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 1.00 HN 0.98 KP 1.03 ! LA 0.98 MK 0.99 NL 0.97 OV 0.88 ! PT 0.90 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 1.02 HN 1.13 KP 1.04 ! LA 1.01 MK 1.05 OV 0.95 PT 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 1.06 HN 0.88 KP 1.08 ! LA 0.97 MK 1.02 NL 1.40 OV 1.05 ! PT 0.93 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.99 HN 0.96 KP 1.05 ! LA 0.97 MK 0.99 NL 0.97 OV 0.90 ! PT 0.90 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 1.03 HN 1.09 KP 1.04 ! LA 1.03 MK 1.09 OV 0.97 PT 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 1.03 HN 0.91 KP 1.09 ! LA 0.95 MK 1.04 NL 1.36 OV 1.04 ! PT 0.90 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.98 HN 0.99 KP 1.06 ! LA 0.96 MK 1.01 NL 0.97 OV 0.90 ! PT 0.90 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.02 HN 1.08 KP 1.02 ! LA 1.02 MK 1.10 OV 0.95 PT 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.01 HN 0.93 KP 1.08 ! LA 0.98 MK 0.99 NL 1.39 OV 1.07 ! PT 0.92 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.99 HN 1.00 KP 1.07 ! LA 0.97 MK 1.03 NL 0.97 OV 0.88 ! PT 0.89 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.02 HN 1.09 KP 1.02 ! LA 1.03 MK 1.08 OV 0.96 PT 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.04 HN 0.90 KP 1.08 ! LA 1.00 MK 1.01 NL 1.36 OV 1.08 ! PT 0.93 SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.99 HN 0.95 KP 1.05 ! LA 0.97 MK 1.01 NL 0.96 OV 0.89 ! PT 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.08 HN 1.10 KP 1.04 ! LA 1.01 MK 1.07 OV 0.93 PT 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 1.07 HN 0.90 KP 1.10 ! LA 0.98 MK 1.04 NL 1.38 OV 1.05 ! PT 0.91 SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 0.98 HN 0.98 KP 1.05 ! LA 0.95 MK 1.01 NL 0.97 OV 0.90 ! PT 0.89 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.04 HN 1.13 KP 1.03 ! LA 1.04 MK 1.06 OV 0.94 PT 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 1.04 HN 0.91 KP 1.10 ! LA 0.99 MK 1.02 NL 1.37 OV 1.07 ! PT 0.93 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.98 HN 0.97 KP 1.06 ! LA 0.96 MK 0.99 NL 0.97 OV 0.88 ! PT 0.90 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.03 HN 1.12 KP 1.03 ! LA 1.04 MK 1.09 OV 0.99 PT 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 1.03 HN 0.95 KP 1.08 ! LA 0.99 MK 1.01 NL 1.39 OV 1.06 ! PT 0.91 SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.96 HN 0.98 KP 1.05 ! LA 0.96 MK 1.01 NL 0.96 OV 0.90 ! PT 0.88 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.06 HN 1.07 KP 1.04 ! LA 1.02 MK 1.07 OV 0.96 PT 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 1.04 HN 0.96 KP 1.08 ! LA 0.98 MK 1.04 NL 1.38 OV 1.08 ! PT 0.91 SC 1.02 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.99 HN 0.99 KP 1.02 ! LA 0.96 MK 1.00 NL 0.95 OV 0.87 ! PT 0.92 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.06 HN 1.12 KP 1.05 ! LA 1.03 MK 1.05 OV 0.95 PT 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 1.04 HN 0.95 KP 1.09 ! LA 0.97 MK 1.02 NL 1.38 OV 1.08 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.99 HN 0.98 KP 1.02 ! LA 0.95 MK 0.98 NL 0.98 OV 0.89 ! PT 0.89 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.04 HN 1.13 KP 1.04 ! LA 1.04 MK 1.09 OV 0.94 PT 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 1.05 HN 0.95 KP 1.08 ! LA 0.98 MK 1.01 NL 1.38 OV 1.06 ! PT 0.92 SC 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.98 HN 0.96 KP 1.05 ! LA 0.96 MK 0.97 NL 0.94 OV 0.89 ! PT 0.90 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 1.07 HN 1.21 KP 1.06 ! LA 1.05 MK 1.04 OV 0.92 PT 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.04 HN 0.94 KP 1.10 ! LA 0.99 MK 1.04 NL 1.37 OV 1.09 ! PT 0.91 SC 1.01 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.98 HN 0.97 KP 1.02 ! LA 0.94 MK 1.04 NL 0.95 OV 0.87 ! PT 0.90 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 1.04 HN 1.12 KP 1.02 ! LA 1.03 MK 1.04 OV 0.96 PT 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.02 HN 0.99 KP 1.08 ! LA 0.98 MK 1.04 NL 1.41 OV 1.11 ! PT 0.91 SC 1.03 ! ! ! Fit before self-cal, rms=0.134450Jy sigma=1.483070 ! Fit after self-cal, rms=0.075972Jy sigma=0.792188 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9774 mas, bmaj=2.337 mas, bpa=-15.73 degrees ! Estimated noise=0.806674 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.4, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00378882 Jy ! Component: 100 - total flux cleaned = 0.00474232 Jy ! Component: 150 - total flux cleaned = 0.00538745 Jy ! Component: 200 - total flux cleaned = 0.00613213 Jy ! Total flux subtracted in 200 components = 0.00613213 Jy ! Clean residual min=-0.010123 max=0.008223 Jy/beam ! Clean residual mean=0.000007 rms=0.001924 Jy/beam ! Combined flux in latest and established models = 0.967384 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 56 components and 0.967384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071451Jy sigma=0.738457 ! Fit after self-cal, rms=0.071285Jy sigma=0.734903 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071285Jy sigma=0.734903 ! Fit after self-cal, rms=0.070186Jy sigma=0.722875 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9769 mas, bmaj=2.336 mas, bpa=-15.66 degrees ! Estimated noise=0.804935 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00331062 Jy ! Component: 100 - total flux cleaned = -0.00328239 Jy ! Component: 150 - total flux cleaned = -0.00130899 Jy ! Component: 200 - total flux cleaned = 0.000211348 Jy ! Total flux subtracted in 200 components = 0.000211348 Jy ! Clean residual min=-0.008173 max=0.006992 Jy/beam ! Clean residual mean=0.000006 rms=0.001545 Jy/beam ! Combined flux in latest and established models = 0.967596 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 65 components and 0.967596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067968Jy sigma=0.697061 ! Fit after self-cal, rms=0.067905Jy sigma=0.696058 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175869 Jy ! Component: 100 - total flux cleaned = 0.00326292 Jy ! Component: 150 - total flux cleaned = 0.0041544 Jy ! Component: 200 - total flux cleaned = 0.00472631 Jy ! Total flux subtracted in 200 components = 0.00472631 Jy ! Clean residual min=-0.007484 max=0.006830 Jy/beam ! Clean residual mean=0.000006 rms=0.001472 Jy/beam ! Combined flux in latest and established models = 0.972322 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 70 components and 0.972322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067313Jy sigma=0.689869 ! Fit after self-cal, rms=0.067297Jy sigma=0.689542 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067297Jy sigma=0.689542 ! Fit after self-cal, rms=0.066501Jy sigma=0.679230 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9765 mas, bmaj=2.334 mas, bpa=-15.6 degrees ! Estimated noise=0.804443 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00563769 Jy ! Component: 100 - total flux cleaned = -0.00459706 Jy ! Component: 150 - total flux cleaned = -0.00347682 Jy ! Component: 200 - total flux cleaned = -0.00250149 Jy ! Total flux subtracted in 200 components = -0.00250149 Jy ! Clean residual min=-0.006090 max=0.006217 Jy/beam ! Clean residual mean=0.000004 rms=0.001225 Jy/beam ! Combined flux in latest and established models = 0.96982 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 72 components and 0.96982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065498Jy sigma=0.667660 ! Fit after self-cal, rms=0.065497Jy sigma=0.667513 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.6, -4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00648435 Jy ! Component: 100 - total flux cleaned = 0.00972215 Jy ! Component: 150 - total flux cleaned = 0.0115282 Jy ! Component: 200 - total flux cleaned = 0.0132092 Jy ! Total flux subtracted in 200 components = 0.0132092 Jy ! Clean residual min=-0.005096 max=0.004484 Jy/beam ! Clean residual mean=0.000004 rms=0.001091 Jy/beam ! Combined flux in latest and established models = 0.98303 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 95 components and 0.98303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064640Jy sigma=0.658518 ! Fit after self-cal, rms=0.064612Jy sigma=0.658053 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064612Jy sigma=0.658053 ! Fit after self-cal, rms=0.064227Jy sigma=0.653623 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.132 mas, bmaj=2.749 mas, bpa=-2.868 degrees ! Estimated noise=1.00259 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0018168 Jy ! Component: 100 - total flux cleaned = -0.000870084 Jy ! Component: 150 - total flux cleaned = -2.73184e-05 Jy ! Component: 200 - total flux cleaned = 0.000664102 Jy ! Total flux subtracted in 200 components = 0.000664102 Jy ! Clean residual min=-0.005065 max=0.004988 Jy/beam ! Clean residual mean=0.000007 rms=0.001263 Jy/beam ! Combined flux in latest and established models = 0.983694 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 120 components and 0.983694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063806Jy sigma=0.648137 ! Fit after self-cal, rms=0.063803Jy sigma=0.647886 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00076588 Jy ! Component: 100 - total flux cleaned = 0.00139722 Jy ! Component: 150 - total flux cleaned = 0.00167108 Jy ! Component: 200 - total flux cleaned = 0.0019829 Jy ! Total flux subtracted in 200 components = 0.0019829 Jy ! Clean residual min=-0.004672 max=0.004672 Jy/beam ! Clean residual mean=0.000007 rms=0.001220 Jy/beam ! Combined flux in latest and established models = 0.985677 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 132 components and 0.985677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063678Jy sigma=0.646405 ! Fit after self-cal, rms=0.063679Jy sigma=0.646339 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9766 mas, bmaj=2.335 mas, bpa=-15.55 degrees ! Estimated noise=0.803549 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9766 x 2.335 at -15.55 degrees (North through East) ! Clean map min=-0.0045412 max=0.81468 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063679Jy sigma=0.646339 ! Fit after self-cal, rms=0.060184Jy sigma=0.602338 ! Inverting map and beam ! Estimated beam: bmin=0.9773 mas, bmaj=2.334 mas, bpa=-15.49 degrees ! Estimated noise=0.803347 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00363577 Jy ! Component: 100 - total flux cleaned = -0.00291098 Jy ! Component: 150 - total flux cleaned = -0.00231763 Jy ! Component: 200 - total flux cleaned = -0.00166569 Jy ! Total flux subtracted in 200 components = -0.00166569 Jy ! Clean residual min=-0.003864 max=0.003291 Jy/beam ! Clean residual mean=0.000004 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.984011 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 142 components and 0.984011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059800Jy sigma=0.598157 ! Fit after self-cal, rms=0.059797Jy sigma=0.598126 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000891143 Jy ! Component: 100 - total flux cleaned = 0.00137782 Jy ! Component: 150 - total flux cleaned = 0.00171649 Jy ! Component: 200 - total flux cleaned = 0.00202991 Jy ! Total flux subtracted in 200 components = 0.00202991 Jy ! Clean residual min=-0.003622 max=0.003169 Jy/beam ! Clean residual mean=0.000004 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.986041 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 152 components and 0.986041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059694Jy sigma=0.596951 ! Fit after self-cal, rms=0.059693Jy sigma=0.596934 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059693Jy sigma=0.596934 ! Fit after self-cal, rms=0.059597Jy sigma=0.595146 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7559 mas, bmaj=2.155 mas, bpa=-17.79 degrees ! Estimated noise=1.16153 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.627002 Jy ! Component: 100 - total flux cleaned = 0.764969 Jy ! Component: 150 - total flux cleaned = 0.8158 Jy ! Component: 200 - total flux cleaned = 0.847153 Jy ! Total flux subtracted in 200 components = 0.847153 Jy ! Clean residual min=-0.008660 max=0.016625 Jy/beam ! Clean residual mean=0.000004 rms=0.002123 Jy/beam ! Combined flux in latest and established models = 0.847153 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.847153 Jy ! Inverting map and beam ! Estimated beam: bmin=0.977 mas, bmaj=2.333 mas, bpa=-15.47 degrees ! Estimated noise=0.803156 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0307406 Jy ! Component: 100 - total flux cleaned = 0.0503033 Jy ! Component: 150 - total flux cleaned = 0.0646829 Jy ! Component: 200 - total flux cleaned = 0.0756147 Jy ! Total flux subtracted in 200 components = 0.0756147 Jy ! Clean residual min=-0.004321 max=0.006401 Jy/beam ! Clean residual mean=0.000004 rms=0.001395 Jy/beam ! Combined flux in latest and established models = 0.922768 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 58 components and 0.922768 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00860529 Jy ! Component: 100 - total flux cleaned = 0.0157606 Jy ! Component: 150 - total flux cleaned = 0.021832 Jy ! Component: 200 - total flux cleaned = 0.0270169 Jy ! Total flux subtracted in 200 components = 0.0270169 Jy ! Clean residual min=-0.004135 max=0.004257 Jy/beam ! Clean residual mean=0.000003 rms=0.000997 Jy/beam ! Combined flux in latest and established models = 0.949785 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 94 components and 0.949785 Jy ! Inverting map ! Added new window around map position (9.8, -12.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00384745 Jy ! Component: 100 - total flux cleaned = 0.00696001 Jy ! Component: 150 - total flux cleaned = 0.0099156 Jy ! Component: 200 - total flux cleaned = 0.0124617 Jy ! Total flux subtracted in 200 components = 0.0124617 Jy ! Clean residual min=-0.003068 max=0.003321 Jy/beam ! Clean residual mean=0.000003 rms=0.000837 Jy/beam ! Combined flux in latest and established models = 0.962247 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 128 components and 0.962247 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.134 mas, bmaj=2.749 mas, bpa=-2.466 degrees ! Estimated noise=1.00183 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00511092 Jy ! Component: 100 - total flux cleaned = 0.00879112 Jy ! Component: 150 - total flux cleaned = 0.0111718 Jy ! Component: 200 - total flux cleaned = 0.0130984 Jy ! Total flux subtracted in 200 components = 0.0130984 Jy ! Clean residual min=-0.003244 max=0.003777 Jy/beam ! Clean residual mean=0.000005 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 0.975345 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121801 Jy ! Component: 100 - total flux cleaned = 0.00230591 Jy ! Component: 150 - total flux cleaned = 0.00327884 Jy ! Component: 200 - total flux cleaned = 0.00395523 Jy ! Total flux subtracted in 200 components = 0.00395523 Jy ! Clean residual min=-0.003057 max=0.003563 Jy/beam ! Clean residual mean=0.000005 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 0.9793 Jy ! Adding 109 model components to the UV plane model. ! The established model now contains 217 components and 0.9793 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.977 mas, bmaj=2.333 mas, bpa=-15.47 degrees ! Estimated noise=0.803156 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000365117 Jy ! Component: 100 - total flux cleaned = -0.000301853 Jy ! Component: 150 - total flux cleaned = 2.52113e-05 Jy ! Component: 200 - total flux cleaned = 0.000386477 Jy ! Total flux subtracted in 200 components = 0.000386477 Jy ! Clean residual min=-0.002572 max=0.002633 Jy/beam ! Clean residual mean=0.000003 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.979687 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 238 components and 0.979687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059316Jy sigma=0.590394 ! Fit after self-cal, rms=0.059263Jy sigma=0.589616 wmodel J0830+2410_X_a_map.mod ! Writing 238 model components to file: J0830+2410_X_a_map.mod wobs J0830+2410_X_a_uvs.fits ! Writing UV FITS file: J0830+2410_X_a_uvs.fits wwins J0830+2410_X_a_map.win ! wwins: Wrote 6 windows to J0830+2410_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000346138 Jy ! Component: 100 - total flux cleaned = 0.000532313 Jy ! Component: 150 - total flux cleaned = 0.000577941 Jy ! Component: 200 - total flux cleaned = 0.000664479 Jy ! Component: 250 - total flux cleaned = 0.000829163 Jy ! Component: 300 - total flux cleaned = 0.000949027 Jy ! Component: 350 - total flux cleaned = 0.0010664 Jy ! Component: 400 - total flux cleaned = 0.00118033 Jy ! Component: 450 - total flux cleaned = 0.00121766 Jy ! Component: 500 - total flux cleaned = 0.00121892 Jy ! Component: 550 - total flux cleaned = 0.00129095 Jy ! Component: 600 - total flux cleaned = 0.00118561 Jy ! Component: 650 - total flux cleaned = 0.00129066 Jy ! Component: 700 - total flux cleaned = 0.00135893 Jy ! Component: 750 - total flux cleaned = 0.0013921 Jy ! Component: 800 - total flux cleaned = 0.00142477 Jy ! Component: 850 - total flux cleaned = 0.00126188 Jy ! Component: 900 - total flux cleaned = 0.00123018 Jy ! Component: 950 - total flux cleaned = 0.00110389 Jy ! Component: 1000 - total flux cleaned = 0.00101077 Jy ! Component: 1050 - total flux cleaned = 0.00101098 Jy ! Component: 1100 - total flux cleaned = 0.000889216 Jy ! Component: 1150 - total flux cleaned = 0.000769483 Jy ! Component: 1200 - total flux cleaned = 0.000680698 Jy ! Component: 1250 - total flux cleaned = 0.000622113 Jy ! Component: 1300 - total flux cleaned = 0.000593168 Jy ! Component: 1350 - total flux cleaned = 0.00050804 Jy ! Component: 1400 - total flux cleaned = 0.000423415 Jy ! Component: 1450 - total flux cleaned = 0.000451641 Jy ! Component: 1500 - total flux cleaned = 0.000452249 Jy ! Component: 1550 - total flux cleaned = 0.000479778 Jy ! Component: 1600 - total flux cleaned = 0.000452545 Jy ! Component: 1650 - total flux cleaned = 0.00047948 Jy ! Component: 1700 - total flux cleaned = 0.000479694 Jy ! Component: 1750 - total flux cleaned = 0.000506047 Jy ! Component: 1800 - total flux cleaned = 0.000531938 Jy ! Component: 1850 - total flux cleaned = 0.000583305 Jy ! Component: 1900 - total flux cleaned = 0.000430561 Jy ! Component: 1950 - total flux cleaned = 0.000430465 Jy ! Component: 2000 - total flux cleaned = 0.000405539 Jy ! Component: 2050 - total flux cleaned = 0.000207653 Jy ! Component: 2100 - total flux cleaned = 0.000305816 Jy ! Component: 2150 - total flux cleaned = 0.000208422 Jy ! Component: 2200 - total flux cleaned = 0.000184189 Jy ! Component: 2250 - total flux cleaned = 4.09645e-05 Jy ! Component: 2300 - total flux cleaned = 4.0896e-05 Jy ! Component: 2350 - total flux cleaned = 8.80373e-05 Jy ! Component: 2400 - total flux cleaned = 1.83692e-05 Jy ! Component: 2450 - total flux cleaned = -0.000143145 Jy ! Component: 2500 - total flux cleaned = -7.4689e-05 Jy ! Component: 2550 - total flux cleaned = -0.000233425 Jy ! Component: 2600 - total flux cleaned = -0.000233266 Jy ! Component: 2650 - total flux cleaned = -0.000255591 Jy ! Component: 2700 - total flux cleaned = -0.000366388 Jy ! Component: 2750 - total flux cleaned = -0.000344257 Jy ! Component: 2800 - total flux cleaned = -0.000344066 Jy ! Component: 2850 - total flux cleaned = -0.00038715 Jy ! Component: 2900 - total flux cleaned = -0.000387227 Jy ! Component: 2950 - total flux cleaned = -0.000430304 Jy ! Component: 3000 - total flux cleaned = -0.000451071 Jy ! Component: 3050 - total flux cleaned = -0.000556098 Jy ! Component: 3100 - total flux cleaned = -0.000577219 Jy ! Component: 3150 - total flux cleaned = -0.000577497 Jy ! Component: 3200 - total flux cleaned = -0.000638951 Jy ! Component: 3250 - total flux cleaned = -0.000639032 Jy ! Component: 3300 - total flux cleaned = -0.000638876 Jy ! Component: 3350 - total flux cleaned = -0.000699222 Jy ! Component: 3400 - total flux cleaned = -0.000719123 Jy ! Component: 3450 - total flux cleaned = -0.000659781 Jy ! Component: 3500 - total flux cleaned = -0.000777761 Jy ! Component: 3550 - total flux cleaned = -0.000738798 Jy ! Component: 3600 - total flux cleaned = -0.000739003 Jy ! Component: 3650 - total flux cleaned = -0.000873826 Jy ! Component: 3700 - total flux cleaned = -0.000892994 Jy ! Component: 3750 - total flux cleaned = -0.000949942 Jy ! Component: 3800 - total flux cleaned = -0.000855576 Jy ! Component: 3850 - total flux cleaned = -0.000893005 Jy ! Component: 3900 - total flux cleaned = -0.000911618 Jy ! Component: 3950 - total flux cleaned = -0.000893278 Jy ! Component: 4000 - total flux cleaned = -0.000948162 Jy ! Component: 4050 - total flux cleaned = -0.000893493 Jy ! Total flux subtracted in 4096 components = -0.000911637 Jy ! Clean residual min=-0.001298 max=0.001199 Jy/beam ! Clean residual mean=0.000001 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.978775 Jy keep ! Adding 308 model components to the UV plane model. ! The established model now contains 546 components and 0.978775 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J0830+2410_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.977 x 2.333 at -15.47 degrees (North through East) ! Clean map min=-0.0019645 max=0.81955 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J0830+2410_X_a_map.fits wmodel /image_prod/ug002_uvm//J0830+2410_X_a_map.mod ! Writing 546 model components to file: /image_prod/ug002_uvm//J0830+2410_X_a_map.mod wobs /image_prod/ug002_uvm//J0830+2410_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J0830+2410_X_a_uvs.fits wwins /image_prod/ug002_uvm//J0830+2410_X_a_map.win ! wwins: Wrote 7 windows to /image_prod/ug002_uvm//J0830+2410_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.819547 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000324373 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.118739 0.118739 0.237478 0.474955 0.949911 1.89982 3.79964 7.59929 15.1986 30.3971 60.7943 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.819 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2526.55 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J0830+2410_X_a_dfm.log closed on Wed Mar 4 16:52:14 2020