! Started logfile: /image_prod/ug002_uvm//J0811+0146_X_a_dfm.log on Wed Mar 4 16:50:49 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J0811+0146_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J0811+0146_X_a_uvm.fits ! AN table 1: 12 integrations on 36 of 36 possible baselines. ! AN table 2: 20 integrations on 45 of 45 possible baselines. ! AN table 3: 21 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.818008 visibilities/baseline/integration-bin. ! Found source: J0811+0146 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 20496 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0811+0146_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.159272Jy sigma=8.245382 ! Fit after self-cal, rms=0.435920Jy sigma=3.213764 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6637 mas, bmaj=1.65 mas, bpa=-1.712 degrees ! Estimated noise=1.04753 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.442247 Jy ! Component: 100 - total flux cleaned = 0.539062 Jy ! Total flux subtracted in 100 components = 0.539062 Jy ! Clean residual min=-0.018028 max=0.030661 Jy/beam ! Clean residual mean=-0.000001 rms=0.003128 Jy/beam ! Combined flux in latest and established models = 0.539062 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.539062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.125310Jy sigma=0.872216 ! Fit after self-cal, rms=0.125310Jy sigma=0.872206 ! Inverting map ! Added new window around map position (1, 6.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0334872 Jy ! Component: 100 - total flux cleaned = 0.0515449 Jy ! Total flux subtracted in 100 components = 0.0515449 Jy ! Clean residual min=-0.017541 max=0.022927 Jy/beam ! Clean residual mean=-0.000000 rms=0.002836 Jy/beam ! Combined flux in latest and established models = 0.590607 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 11 components and 0.590607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.114848Jy sigma=0.818216 ! Fit after self-cal, rms=0.114408Jy sigma=0.814921 ! Inverting map ! Added new window around map position (-1, -6.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0173716 Jy ! Component: 100 - total flux cleaned = 0.0280271 Jy ! Total flux subtracted in 100 components = 0.0280271 Jy ! Clean residual min=-0.016877 max=0.013686 Jy/beam ! Clean residual mean=0.000000 rms=0.002747 Jy/beam ! Combined flux in latest and established models = 0.618634 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 24 components and 0.618634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.111824Jy sigma=0.805828 ! Fit after self-cal, rms=0.111780Jy sigma=0.805508 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8025 mas, bmaj=1.955 mas, bpa=-0.9083 degrees ! Estimated noise=0.705123 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104707 Jy ! Component: 100 - total flux cleaned = 0.0164752 Jy ! Component: 150 - total flux cleaned = 0.01948 Jy ! Component: 200 - total flux cleaned = 0.0210898 Jy ! Total flux subtracted in 200 components = 0.0210898 Jy ! Clean residual min=-0.016543 max=0.015361 Jy/beam ! Clean residual mean=0.000001 rms=0.003076 Jy/beam ! Combined flux in latest and established models = 0.639724 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 35 components and 0.639724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.110490Jy sigma=0.800304 ! Fit after self-cal, rms=0.110482Jy sigma=0.800231 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8025 x 1.955 at -0.9083 degrees (North through East) ! Clean map min=-0.015364 max=0.56173 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 1.18 HN 1.16 KP 1.24 ! LA 1.01 MK 1.14 NL 1.37 OV 1.08 ! SC 1.16 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.97 HN 0.87 KP 1.00 ! LA 1.03 MK 0.97 NL 1.07 OV 0.90 ! PT 0.92 SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.97 HN 0.90 KP 1.02 ! LA 1.04 MK 0.98 OV 0.92 PT 0.96 ! SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 1.16 HN 1.16 KP 1.26 ! LA 1.05 MK 1.12 NL 1.37 OV 1.07 ! SC 1.16 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.97 HN 0.87 KP 1.01 ! LA 1.01 MK 0.98 NL 1.07 OV 0.89 ! PT 0.91 SC 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.95 HN 0.89 KP 1.03 ! LA 1.06 MK 0.97 OV 0.92 PT 0.96 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.17 HN 1.17 KP 1.25 ! LA 1.03 MK 1.13 NL 1.35 OV 1.07 ! SC 1.18 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.97 HN 0.87 KP 1.00 ! LA 1.02 MK 0.99 NL 1.07 OV 0.88 ! PT 0.91 SC 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.97 HN 0.89 KP 1.03 ! LA 1.06 MK 0.98 OV 0.93 PT 0.96 ! SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 1.15 HN 1.15 KP 1.27 ! LA 1.02 MK 1.16 NL 1.37 OV 1.09 ! SC 1.13 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.96 HN 0.88 KP 1.01 ! LA 1.03 MK 0.98 NL 1.08 OV 0.88 ! PT 0.92 SC 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.95 HN 0.90 KP 1.01 ! LA 1.05 MK 0.99 OV 0.92 PT 0.96 ! SC 1.02 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 1.16 HN 1.17 KP 1.25 ! LA 1.03 MK 1.16 NL 1.38 OV 1.07 ! SC 1.13 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.96 HN 0.87 KP 1.01 ! LA 1.01 MK 0.99 NL 1.08 OV 0.90 ! PT 0.91 SC 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.94 HN 0.89 KP 1.00 ! LA 1.04 MK 0.96 OV 0.93 PT 0.94 ! SC 1.04 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 FD 1.14 HN 1.14 KP 1.25 ! LA 1.02 MK 1.15 NL 1.37 OV 1.08 ! SC 1.16 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.97 HN 0.87 KP 0.99 ! LA 1.01 MK 1.00 NL 1.07 OV 0.89 ! PT 0.91 SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 0.95 HN 0.88 KP 1.02 ! LA 1.05 MK 0.97 OV 0.92 PT 0.96 ! SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 1.14 HN 1.13 KP 1.24 ! LA 1.03 MK 1.14 NL 1.33 OV 1.13 ! SC 1.14 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.96 HN 0.89 KP 1.00 ! LA 1.02 MK 1.00 NL 1.08 OV 0.90 ! PT 0.91 SC 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.96 HN 0.87 KP 1.02 ! LA 1.05 MK 0.98 OV 0.93 PT 0.95 ! SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 1.14 HN 1.17 KP 1.25 ! LA 1.03 MK 1.15 NL 1.37 OV 1.10 ! SC 1.14 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.97 HN 0.88 KP 1.00 ! LA 1.01 MK 0.97 NL 1.08 OV 0.89 ! PT 0.91 SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.96 HN 0.88 KP 1.00 ! LA 1.05 MK 0.98 OV 0.94 PT 0.95 ! SC 1.01 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.16 HN 1.18 KP 1.24 ! LA 1.02 MK 1.16 NL 1.38 OV 1.10 ! SC 1.14 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.96 HN 0.87 KP 1.00 ! LA 1.02 MK 0.99 NL 1.09 OV 0.90 ! PT 0.92 SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.96 HN 0.88 KP 1.00 ! LA 1.05 MK 0.96 OV 0.93 PT 0.95 ! SC 1.01 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.13 HN 1.16 KP 1.26 ! LA 1.03 MK 1.15 NL 1.39 OV 1.09 ! SC 1.08 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.98 HN 0.90 KP 0.99 ! LA 1.02 MK 0.98 NL 1.09 OV 0.88 ! PT 0.91 SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.95 HN 0.90 KP 0.99 ! LA 1.05 MK 0.98 OV 0.93 PT 0.97 ! SC 1.03 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 1.18 HN 1.15 KP 1.25 ! LA 1.04 MK 1.18 NL 1.35 OV 1.09 ! SC 1.12 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.98 HN 0.89 KP 1.01 ! LA 1.01 MK 0.99 NL 1.08 OV 0.88 ! PT 0.91 SC 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.95 HN 0.88 KP 0.98 ! LA 1.05 MK 0.99 OV 0.93 PT 0.97 ! SC 1.04 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.15 HN 1.15 KP 1.23 ! LA 1.04 MK 1.20 NL 1.36 OV 1.09 ! SC 1.12 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.97 HN 0.88 KP 0.99 ! LA 1.01 MK 1.01 NL 1.07 OV 0.90 ! PT 0.90 SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 0.94 HN 0.88 KP 1.01 ! LA 1.04 MK 1.02 OV 0.93 PT 0.96 ! SC 1.02 ! ! ! Fit before self-cal, rms=0.110482Jy sigma=0.800231 ! Fit after self-cal, rms=0.066523Jy sigma=0.443590 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8055 mas, bmaj=1.963 mas, bpa=-0.9008 degrees ! Estimated noise=0.709276 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0111819 Jy ! Component: 100 - total flux cleaned = -0.0159441 Jy ! Component: 150 - total flux cleaned = -0.0173864 Jy ! Component: 200 - total flux cleaned = -0.0184775 Jy ! Total flux subtracted in 200 components = -0.0184775 Jy ! Clean residual min=-0.003433 max=0.003132 Jy/beam ! Clean residual mean=-0.000000 rms=0.000721 Jy/beam ! Combined flux in latest and established models = 0.621246 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 47 components and 0.621246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064575Jy sigma=0.429130 ! Fit after self-cal, rms=0.064578Jy sigma=0.428935 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064578Jy sigma=0.428935 ! Fit after self-cal, rms=0.062047Jy sigma=0.410291 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8055 mas, bmaj=1.962 mas, bpa=-0.9062 degrees ! Estimated noise=0.707877 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00461244 Jy ! Component: 100 - total flux cleaned = -0.00621637 Jy ! Component: 150 - total flux cleaned = -0.00699652 Jy ! Component: 200 - total flux cleaned = -0.0075987 Jy ! Total flux subtracted in 200 components = -0.0075987 Jy ! Clean residual min=-0.002357 max=0.002400 Jy/beam ! Clean residual mean=-0.000000 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.613648 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 51 components and 0.613648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061614Jy sigma=0.407369 ! Fit after self-cal, rms=0.061605Jy sigma=0.407304 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.2, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000168875 Jy ! Component: 100 - total flux cleaned = -0.000240195 Jy ! Component: 150 - total flux cleaned = -0.000479734 Jy ! Component: 200 - total flux cleaned = -0.000695684 Jy ! Total flux subtracted in 200 components = -0.000695684 Jy ! Clean residual min=-0.002009 max=0.001938 Jy/beam ! Clean residual mean=-0.000000 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.612952 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 62 components and 0.612952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061456Jy sigma=0.406367 ! Fit after self-cal, rms=0.061448Jy sigma=0.406327 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061448Jy sigma=0.406327 ! Fit after self-cal, rms=0.061152Jy sigma=0.403841 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8054 mas, bmaj=1.961 mas, bpa=-0.8434 degrees ! Estimated noise=0.70723 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00255981 Jy ! Component: 100 - total flux cleaned = -0.00333421 Jy ! Component: 150 - total flux cleaned = -0.00366165 Jy ! Component: 200 - total flux cleaned = -0.00394913 Jy ! Total flux subtracted in 200 components = -0.00394913 Jy ! Clean residual min=-0.001738 max=0.001805 Jy/beam ! Clean residual mean=-0.000000 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.609003 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 66 components and 0.609003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060997Jy sigma=0.402819 ! Fit after self-cal, rms=0.060993Jy sigma=0.402792 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000416321 Jy ! Component: 100 - total flux cleaned = -0.000617089 Jy ! Component: 150 - total flux cleaned = -0.000763777 Jy ! Component: 200 - total flux cleaned = -0.000967467 Jy ! Total flux subtracted in 200 components = -0.000967467 Jy ! Clean residual min=-0.001680 max=0.001760 Jy/beam ! Clean residual mean=-0.000000 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.608036 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 69 components and 0.608036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060944Jy sigma=0.402493 ! Fit after self-cal, rms=0.060940Jy sigma=0.402480 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060940Jy sigma=0.402480 ! Fit after self-cal, rms=0.060897Jy sigma=0.402197 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.055 mas, bmaj=3.192 mas, bpa=0.7427 degrees ! Estimated noise=0.943684 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000907163 Jy ! Component: 100 - total flux cleaned = -0.00083338 Jy ! Component: 150 - total flux cleaned = -0.000863663 Jy ! Component: 200 - total flux cleaned = -0.000835391 Jy ! Total flux subtracted in 200 components = -0.000835391 Jy ! Clean residual min=-0.001691 max=0.001816 Jy/beam ! Clean residual mean=-0.000001 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.6072 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 78 components and 0.6072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060879Jy sigma=0.402084 ! Fit after self-cal, rms=0.060876Jy sigma=0.402065 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000127824 Jy ! Component: 100 - total flux cleaned = 1.02574e-05 Jy ! Component: 150 - total flux cleaned = 6.0306e-05 Jy ! Component: 200 - total flux cleaned = 8.47133e-05 Jy ! Total flux subtracted in 200 components = 8.47133e-05 Jy ! Clean residual min=-0.001635 max=0.001651 Jy/beam ! Clean residual mean=-0.000001 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.607285 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 80 components and 0.607285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060865Jy sigma=0.401999 ! Fit after self-cal, rms=0.060863Jy sigma=0.401989 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8054 mas, bmaj=1.961 mas, bpa=-0.7988 degrees ! Estimated noise=0.70688 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8054 x 1.961 at -0.7988 degrees (North through East) ! Clean map min=-0.0015331 max=0.56767 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060863Jy sigma=0.401989 ! Fit after self-cal, rms=0.057391Jy sigma=0.373146 ! Inverting map and beam ! Estimated beam: bmin=0.8058 mas, bmaj=1.961 mas, bpa=-0.7999 degrees ! Estimated noise=0.706973 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00124675 Jy ! Component: 100 - total flux cleaned = -0.00145076 Jy ! Component: 150 - total flux cleaned = -0.00158715 Jy ! Component: 200 - total flux cleaned = -0.0015552 Jy ! Total flux subtracted in 200 components = -0.0015552 Jy ! Clean residual min=-0.001493 max=0.001499 Jy/beam ! Clean residual mean=-0.000000 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.60573 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 88 components and 0.60573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057334Jy sigma=0.372781 ! Fit after self-cal, rms=0.057331Jy sigma=0.372770 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.67286e-05 Jy ! Component: 100 - total flux cleaned = -2.97585e-05 Jy ! Component: 150 - total flux cleaned = -8.22301e-05 Jy ! Component: 200 - total flux cleaned = -0.000181225 Jy ! Total flux subtracted in 200 components = -0.000181225 Jy ! Clean residual min=-0.001474 max=0.001388 Jy/beam ! Clean residual mean=-0.000000 rms=0.000315 Jy/beam ! Combined flux in latest and established models = 0.605549 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 93 components and 0.605549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057306Jy sigma=0.372608 ! Fit after self-cal, rms=0.057304Jy sigma=0.372602 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057304Jy sigma=0.372602 ! Fit after self-cal, rms=0.057297Jy sigma=0.372512 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6654 mas, bmaj=1.655 mas, bpa=-1.602 degrees ! Estimated noise=1.04686 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.441943 Jy ! Component: 100 - total flux cleaned = 0.538408 Jy ! Component: 150 - total flux cleaned = 0.566384 Jy ! Component: 200 - total flux cleaned = 0.578534 Jy ! Total flux subtracted in 200 components = 0.578534 Jy ! Clean residual min=-0.003767 max=0.005337 Jy/beam ! Clean residual mean=-0.000000 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.578534 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.578534 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8059 mas, bmaj=1.961 mas, bpa=-0.7668 degrees ! Estimated noise=0.706778 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00956658 Jy ! Component: 100 - total flux cleaned = 0.0147682 Jy ! Component: 150 - total flux cleaned = 0.0183424 Jy ! Component: 200 - total flux cleaned = 0.0208733 Jy ! Total flux subtracted in 200 components = 0.0208733 Jy ! Clean residual min=-0.001878 max=0.001875 Jy/beam ! Clean residual mean=-0.000001 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.599408 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 31 components and 0.599408 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.056 mas, bmaj=3.193 mas, bpa=0.7757 degrees ! Estimated noise=0.943065 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0031088 Jy ! Component: 100 - total flux cleaned = 0.00448836 Jy ! Component: 150 - total flux cleaned = 0.00532641 Jy ! Component: 200 - total flux cleaned = 0.00601801 Jy ! Total flux subtracted in 200 components = 0.00601801 Jy ! Clean residual min=-0.001572 max=0.001460 Jy/beam ! Clean residual mean=-0.000001 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.605426 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000506608 Jy ! Component: 100 - total flux cleaned = 0.000884873 Jy ! Component: 150 - total flux cleaned = 0.00105576 Jy ! Component: 200 - total flux cleaned = 0.00120731 Jy ! Total flux subtracted in 200 components = 0.00120731 Jy ! Clean residual min=-0.001436 max=0.001441 Jy/beam ! Clean residual mean=-0.000000 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.606633 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 69 components and 0.606633 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8059 mas, bmaj=1.961 mas, bpa=-0.7668 degrees ! Estimated noise=0.706778 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000192769 Jy ! Component: 100 - total flux cleaned = 0.00018873 Jy ! Component: 150 - total flux cleaned = 0.000227325 Jy ! Component: 200 - total flux cleaned = 0.000194748 Jy ! Total flux subtracted in 200 components = 0.000194748 Jy ! Clean residual min=-0.001564 max=0.001225 Jy/beam ! Clean residual mean=-0.000000 rms=0.000293 Jy/beam ! Combined flux in latest and established models = 0.606828 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 77 components and 0.606828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057241Jy sigma=0.372155 ! Fit after self-cal, rms=0.057231Jy sigma=0.372085 wmodel J0811+0146_X_a_map.mod ! Writing 77 model components to file: J0811+0146_X_a_map.mod wobs J0811+0146_X_a_uvs.fits ! Writing UV FITS file: J0811+0146_X_a_uvs.fits wwins J0811+0146_X_a_map.win ! wwins: Wrote 4 windows to J0811+0146_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000340452 Jy ! Component: 100 - total flux cleaned = -0.000296384 Jy ! Component: 150 - total flux cleaned = -0.000254677 Jy ! Component: 200 - total flux cleaned = -0.000234638 Jy ! Component: 250 - total flux cleaned = -0.000215136 Jy ! Component: 300 - total flux cleaned = -0.000215298 Jy ! Component: 350 - total flux cleaned = -0.000234389 Jy ! Component: 400 - total flux cleaned = -0.000252806 Jy ! Component: 450 - total flux cleaned = -0.000197432 Jy ! Component: 500 - total flux cleaned = -0.000197564 Jy ! Component: 550 - total flux cleaned = -0.000179651 Jy ! Component: 600 - total flux cleaned = -0.000215111 Jy ! Component: 650 - total flux cleaned = -0.000162631 Jy ! Component: 700 - total flux cleaned = -0.000162786 Jy ! Component: 750 - total flux cleaned = -0.000111474 Jy ! Component: 800 - total flux cleaned = -2.66984e-05 Jy ! Component: 850 - total flux cleaned = 4.04979e-05 Jy ! Component: 900 - total flux cleaned = 7.36974e-05 Jy ! Component: 950 - total flux cleaned = 0.000205692 Jy ! Component: 1000 - total flux cleaned = 0.000254825 Jy ! Component: 1050 - total flux cleaned = 0.000335885 Jy ! Component: 1100 - total flux cleaned = 0.000399957 Jy ! Component: 1150 - total flux cleaned = 0.000399971 Jy ! Component: 1200 - total flux cleaned = 0.000526388 Jy ! Component: 1250 - total flux cleaned = 0.000557769 Jy ! Component: 1300 - total flux cleaned = 0.000573297 Jy ! Component: 1350 - total flux cleaned = 0.000681863 Jy ! Component: 1400 - total flux cleaned = 0.000681747 Jy ! Component: 1450 - total flux cleaned = 0.000742856 Jy ! Component: 1500 - total flux cleaned = 0.000803482 Jy ! Component: 1550 - total flux cleaned = 0.0008336 Jy ! Component: 1600 - total flux cleaned = 0.000938248 Jy ! Component: 1650 - total flux cleaned = 0.000982664 Jy ! Component: 1700 - total flux cleaned = 0.000997445 Jy ! Component: 1750 - total flux cleaned = 0.00112935 Jy ! Component: 1800 - total flux cleaned = 0.00115856 Jy ! Component: 1850 - total flux cleaned = 0.00120205 Jy ! Component: 1900 - total flux cleaned = 0.00124534 Jy ! Component: 1950 - total flux cleaned = 0.00138846 Jy ! Component: 2000 - total flux cleaned = 0.00140253 Jy ! Component: 2050 - total flux cleaned = 0.00144508 Jy ! Component: 2100 - total flux cleaned = 0.00145924 Jy ! Component: 2150 - total flux cleaned = 0.00151536 Jy ! Component: 2200 - total flux cleaned = 0.00151545 Jy ! Component: 2250 - total flux cleaned = 0.00158463 Jy ! Component: 2300 - total flux cleaned = 0.00166739 Jy ! Component: 2350 - total flux cleaned = 0.00169473 Jy ! Component: 2400 - total flux cleaned = 0.00165396 Jy ! Component: 2450 - total flux cleaned = 0.00165394 Jy ! Component: 2500 - total flux cleaned = 0.00165397 Jy ! Component: 2550 - total flux cleaned = 0.00168088 Jy ! Component: 2600 - total flux cleaned = 0.00169418 Jy ! Component: 2650 - total flux cleaned = 0.00172081 Jy ! Component: 2700 - total flux cleaned = 0.00168099 Jy ! Component: 2750 - total flux cleaned = 0.00173387 Jy ! Component: 2800 - total flux cleaned = 0.00174701 Jy ! Component: 2850 - total flux cleaned = 0.00170782 Jy ! Component: 2900 - total flux cleaned = 0.00170792 Jy ! Component: 2950 - total flux cleaned = 0.0017468 Jy ! Component: 3000 - total flux cleaned = 0.00169522 Jy ! Component: 3050 - total flux cleaned = 0.00173382 Jy ! Component: 3100 - total flux cleaned = 0.00170831 Jy ! Component: 3150 - total flux cleaned = 0.00167003 Jy ! Component: 3200 - total flux cleaned = 0.00170826 Jy ! Component: 3250 - total flux cleaned = 0.00173356 Jy ! Component: 3300 - total flux cleaned = 0.00172087 Jy ! Component: 3350 - total flux cleaned = 0.00168326 Jy ! Component: 3400 - total flux cleaned = 0.00177069 Jy ! Component: 3450 - total flux cleaned = 0.00178311 Jy ! Component: 3500 - total flux cleaned = 0.00178303 Jy ! Component: 3550 - total flux cleaned = 0.00184475 Jy ! Component: 3600 - total flux cleaned = 0.00185707 Jy ! Component: 3650 - total flux cleaned = 0.00184483 Jy ! Component: 3700 - total flux cleaned = 0.00185696 Jy ! Component: 3750 - total flux cleaned = 0.00184484 Jy ! Component: 3800 - total flux cleaned = 0.00188114 Jy ! Component: 3850 - total flux cleaned = 0.00192932 Jy ! Component: 3900 - total flux cleaned = 0.00196522 Jy ! Component: 3950 - total flux cleaned = 0.00198913 Jy ! Component: 4000 - total flux cleaned = 0.00209631 Jy ! Component: 4050 - total flux cleaned = 0.00206082 Jy ! Total flux subtracted in 4096 components = 0.00213183 Jy ! Clean residual min=-0.000671 max=0.000738 Jy/beam ! Clean residual mean=-0.000000 rms=0.000210 Jy/beam ! Combined flux in latest and established models = 0.60896 Jy keep ! Adding 342 model components to the UV plane model. ! The established model now contains 419 components and 0.60896 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J0811+0146_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8059 x 1.961 at -0.7668 degrees (North through East) ! Clean map min=-0.0012745 max=0.5711 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J0811+0146_X_a_map.fits wmodel /image_prod/ug002_uvm//J0811+0146_X_a_map.mod ! Writing 419 model components to file: /image_prod/ug002_uvm//J0811+0146_X_a_map.mod wobs /image_prod/ug002_uvm//J0811+0146_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J0811+0146_X_a_uvs.fits wwins /image_prod/ug002_uvm//J0811+0146_X_a_map.win ! wwins: Wrote 5 windows to /image_prod/ug002_uvm//J0811+0146_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.571104 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000209802 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.110209 0.110209 0.220417 0.440834 0.881669 1.76334 3.52668 7.05335 14.1067 28.2134 56.4268 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.571 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2722.11 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J0811+0146_X_a_dfm.log closed on Wed Mar 4 16:50:54 2020