! Started logfile: /image_prod/ug002_uvm//J0746+2549_X_a_dfm.log on Wed Mar 4 16:49:25 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J0746+2549_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J0746+2549_X_a_uvm.fits ! AN table 1: 30 integrations on 36 of 36 possible baselines. ! AN table 2: 42 integrations on 45 of 45 possible baselines. ! AN table 3: 21 integrations on 36 of 36 possible baselines. ! AN table 4: 23 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.763065 visibilities/baseline/integration-bin. ! Found source: J0746+2549 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 41700 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0746+2549_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 71 telescope corrections were flagged in sub-array 1. ! A total of 43 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 32 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 71 telescope corrections were flagged in sub-array 1. ! A total of 43 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 32 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 71 telescope corrections were flagged in sub-array 1. ! A total of 43 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 32 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 71 telescope corrections were flagged in sub-array 1. ! A total of 43 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 32 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 71 telescope corrections were flagged in sub-array 1. ! A total of 43 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 32 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 71 telescope corrections were flagged in sub-array 1. ! A total of 43 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 32 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 71 telescope corrections were flagged in sub-array 1. ! A total of 43 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 32 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 71 telescope corrections were flagged in sub-array 1. ! A total of 43 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 32 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 9. ! A total of 71 telescope corrections were flagged in sub-array 1. ! A total of 43 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 32 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 10. ! A total of 71 telescope corrections were flagged in sub-array 1. ! A total of 43 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 32 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 11. ! A total of 71 telescope corrections were flagged in sub-array 1. ! A total of 43 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 32 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 12. ! A total of 71 telescope corrections were flagged in sub-array 1. ! A total of 43 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 32 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.019965Jy sigma=9.435487 ! Fit after self-cal, rms=0.816162Jy sigma=7.525875 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6984 mas, bmaj=1.5 mas, bpa=-1.549 degrees ! Estimated noise=0.632054 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.13955 Jy ! Component: 100 - total flux cleaned = 0.173684 Jy ! Total flux subtracted in 100 components = 0.173684 Jy ! Clean residual min=-0.004510 max=0.014216 Jy/beam ! Clean residual mean=-0.000002 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.173684 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.173684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069006Jy sigma=0.577399 ! Fit after self-cal, rms=0.068957Jy sigma=0.576950 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0159495 Jy ! Component: 100 - total flux cleaned = 0.0250332 Jy ! Total flux subtracted in 100 components = 0.0250332 Jy ! Clean residual min=-0.003890 max=0.004789 Jy/beam ! Clean residual mean=-0.000000 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.198717 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 16 components and 0.198717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064490Jy sigma=0.528351 ! Fit after self-cal, rms=0.064465Jy sigma=0.527971 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00600807 Jy ! Component: 100 - total flux cleaned = 0.00984694 Jy ! Total flux subtracted in 100 components = 0.00984694 Jy ! Clean residual min=-0.003848 max=0.004154 Jy/beam ! Clean residual mean=0.000001 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.208564 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 19 components and 0.208564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063863Jy sigma=0.522154 ! Fit after self-cal, rms=0.063863Jy sigma=0.522081 ! Inverting map ! Added new window around map position (9.4, 8.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00290959 Jy ! Component: 100 - total flux cleaned = 0.00361968 Jy ! Total flux subtracted in 100 components = 0.00361968 Jy ! Clean residual min=-0.003897 max=0.003729 Jy/beam ! Clean residual mean=0.000001 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.212183 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 24 components and 0.212183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063722Jy sigma=0.521189 ! Fit after self-cal, rms=0.063718Jy sigma=0.521113 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9365 mas, bmaj=1.837 mas, bpa=0.1793 degrees ! Estimated noise=0.389245 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000771211 Jy ! Component: 100 - total flux cleaned = -0.00092036 Jy ! Component: 150 - total flux cleaned = -0.000997575 Jy ! Component: 200 - total flux cleaned = -0.00107027 Jy ! Total flux subtracted in 200 components = -0.00107027 Jy ! Clean residual min=-0.003254 max=0.003134 Jy/beam ! Clean residual mean=-0.000000 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.211113 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 34 components and 0.211113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063635Jy sigma=0.520383 ! Fit after self-cal, rms=0.063629Jy sigma=0.520326 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9365 x 1.837 at 0.1793 degrees (North through East) ! Clean map min=-0.0030504 max=0.18568 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 HN 0.88 KP 0.97 LA 0.96 ! MK 0.92 NL 1.10 OV 0.84 PT 0.88 ! SC 1.28 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.01 HN 0.95 KP 1.06 ! LA 1.06 MK 1.08 NL 1.04 OV 0.91 ! PT 0.93 SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.02 HN 0.91 KP 1.07 ! LA 1.08 MK 1.08 OV 0.93 PT 0.93 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 FD 1.00 HN 1.05 KP 1.05 ! LA 1.00* NL 1.02 OV 0.99 PT 1.02 ! SC 0.92 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 HN 0.86 KP 0.96 LA 0.96 ! MK 0.90 NL 1.08 OV 0.85 PT 0.87 ! SC 1.27 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.00 HN 0.93 KP 1.05 ! LA 1.04 MK 1.10 NL 1.06 OV 0.92 ! PT 0.93 SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 1.02 HN 0.90 KP 1.05 ! LA 1.08 MK 1.12 OV 0.93 PT 0.97 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 FD 1.05 HN 1.03 KP 1.05 ! LA 1.00* NL 1.04 OV 1.02 PT 0.99 ! SC 0.92 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 HN 0.87 KP 0.96 LA 0.98 ! MK 0.92 NL 1.11 OV 0.84 PT 0.93 ! SC 1.23 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.01 HN 0.94 KP 1.04 ! LA 1.06 MK 1.14 NL 1.05 OV 0.91 ! PT 0.92 SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 1.02 HN 0.91 KP 1.07 ! LA 1.05 MK 1.04 OV 0.95 PT 0.93 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.07 FD 1.04 HN 1.03 KP 1.02 ! LA 1.00* NL 1.02 OV 1.03 PT 0.99 ! SC 0.95 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 HN 0.89 KP 0.98 LA 0.99 ! MK 0.95 NL 1.13 OV 0.83 PT 0.87 ! SC 1.22 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.02 HN 0.96 KP 1.06 ! LA 1.04 MK 1.12 NL 1.07 OV 0.91 ! PT 0.92 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.01 HN 0.93 KP 1.05 ! LA 1.08 MK 1.07 OV 0.93 PT 0.94 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 1.04 HN 1.05 KP 1.03 ! LA 1.00* NL 1.04 OV 1.00 PT 1.03 ! SC 0.97 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 HN 0.88 KP 0.98 LA 0.97 ! MK 0.91 NL 1.08 OV 0.85 PT 0.91 ! SC 1.26 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.01 HN 0.94 KP 1.07 ! LA 1.06 MK 1.10 NL 1.05 OV 0.92 ! PT 0.93 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.04 HN 0.91 KP 1.03 ! LA 1.06 MK 1.07 OV 0.94 PT 1.00 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.02 FD 1.03 HN 1.04 KP 1.05 ! LA 1.00* NL 1.05 OV 1.03 PT 0.86 ! SC 0.93 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 HN 0.90 KP 0.98 LA 0.99 ! MK 0.92 NL 1.10 OV 0.82 PT 0.93 ! SC 1.28 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.04 HN 0.94 KP 1.04 ! LA 1.06 MK 1.07 NL 1.06 OV 0.93 ! PT 0.92 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.02 HN 0.92 KP 1.09 ! LA 1.06 MK 1.10 OV 0.94 PT 0.96 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 FD 1.04 HN 1.04 KP 1.07 ! LA 1.00* NL 1.03 OV 1.02 PT 1.01 ! SC 0.96 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 HN 0.93 KP 0.95 LA 0.97 ! MK 0.95 NL 1.11 OV 0.86 PT 0.94 ! SC 1.27 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.03 HN 0.94 KP 1.06 ! LA 1.07 MK 1.12 NL 1.06 OV 0.91 ! PT 0.94 SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.02 HN 0.90 KP 1.09 ! LA 1.10 MK 1.08 OV 0.91 PT 0.94 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 FD 1.08 HN 1.05 KP 1.05 ! LA 1.00* NL 1.04 OV 1.03 PT 1.00 ! SC 0.91 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 HN 0.92 KP 0.99 LA 0.97 ! MK 0.96 NL 1.12 OV 0.84 PT 0.94 ! SC 1.22 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.03 HN 0.95 KP 1.06 ! LA 1.06 MK 1.08 NL 1.07 OV 0.93 ! PT 0.93 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.04 HN 0.89 KP 1.08 ! LA 1.09 MK 1.09 OV 0.90 PT 0.94 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.06 FD 1.07 HN 1.05 KP 1.07 ! LA 1.00* NL 1.01 OV 1.03 PT 1.00 ! SC 0.97 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 HN 0.93 KP 0.98 LA 0.96 ! MK 0.98 NL 1.12 OV 0.83 PT 0.93 ! SC 1.33 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.03 HN 0.95 KP 1.07 ! LA 1.09 MK 1.09 NL 1.06 OV 0.94 ! PT 0.93 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.05 HN 0.86 KP 1.06 ! LA 1.07 MK 1.12 OV 0.95 PT 0.95 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 FD 1.03 HN 1.07 KP 1.05 ! LA 1.00* NL 1.08 OV 1.03 PT 1.03 ! SC 0.96 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 HN 0.89 KP 1.00 LA 0.98 ! MK 0.99 NL 1.13 OV 0.87 PT 0.91 ! SC 1.27 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.03 HN 0.96 KP 1.08 ! LA 1.09 MK 1.08 NL 1.07 OV 0.93 ! PT 0.93 SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.03 HN 0.92 KP 1.03 ! LA 1.09 MK 1.14 OV 0.98 PT 0.98 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.06 FD 1.02 HN 1.05 KP 1.09 ! LA 1.00* NL 1.02 OV 1.03 PT 1.02 ! SC 0.94 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 HN 0.96 KP 1.02 LA 0.98 ! MK 0.97 NL 1.14 OV 0.84 PT 0.89 ! SC 1.25 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.01 HN 0.94 KP 1.09 ! LA 1.06 MK 1.12 NL 1.06 OV 0.93 ! PT 0.94 SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.01 HN 0.94 KP 1.05 ! LA 1.09 MK 1.10 OV 0.96 PT 0.93 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.07 FD 1.01 HN 1.10 KP 1.07 ! LA 1.00* NL 1.07 OV 1.03 PT 1.05 ! SC 0.93 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 HN 0.88 KP 0.96 LA 0.99 ! MK 0.99 NL 1.11 OV 0.86 PT 0.89 ! SC 1.26 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.06 HN 0.97 KP 1.08 ! LA 1.08 MK 1.11 NL 1.06 OV 0.94 ! PT 0.93 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 1.05 HN 0.88 KP 1.07 ! LA 1.08 MK 1.11 OV 0.97 PT 0.95 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 FD 1.02 HN 1.02 KP 1.06 ! LA 1.00* NL 1.06 OV 1.00 PT 1.03 ! SC 0.97 ! ! ! Fit before self-cal, rms=0.063629Jy sigma=0.520326 ! Fit after self-cal, rms=0.060982Jy sigma=0.488438 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9449 mas, bmaj=1.843 mas, bpa=0.4128 degrees ! Estimated noise=0.390323 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000185524 Jy ! Component: 100 - total flux cleaned = -0.00038812 Jy ! Component: 150 - total flux cleaned = -0.000444359 Jy ! Component: 200 - total flux cleaned = -0.000419183 Jy ! Total flux subtracted in 200 components = -0.000419183 Jy ! Clean residual min=-0.001699 max=0.001507 Jy/beam ! Clean residual mean=-0.000002 rms=0.000324 Jy/beam ! Combined flux in latest and established models = 0.210694 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.210694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060938Jy sigma=0.488197 ! Fit after self-cal, rms=0.060945Jy sigma=0.488054 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060945Jy sigma=0.488054 ! Fit after self-cal, rms=0.062700Jy sigma=0.468512 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9444 mas, bmaj=1.845 mas, bpa=-0.04123 degrees ! Estimated noise=0.390671 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000149674 Jy ! Component: 100 - total flux cleaned = 0.000285691 Jy ! Component: 150 - total flux cleaned = 0.000372054 Jy ! Component: 200 - total flux cleaned = 0.000455989 Jy ! Total flux subtracted in 200 components = 0.000455989 Jy ! Clean residual min=-0.000990 max=0.001147 Jy/beam ! Clean residual mean=0.000000 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.21115 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 54 components and 0.21115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062677Jy sigma=0.468271 ! Fit after self-cal, rms=0.062728Jy sigma=0.468189 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.4, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000947383 Jy ! Component: 100 - total flux cleaned = 0.000990843 Jy ! Component: 150 - total flux cleaned = 0.000989873 Jy ! Component: 200 - total flux cleaned = 0.00102377 Jy ! Total flux subtracted in 200 components = 0.00102377 Jy ! Clean residual min=-0.001020 max=0.000830 Jy/beam ! Clean residual mean=0.000000 rms=0.000201 Jy/beam ! Combined flux in latest and established models = 0.212174 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 67 components and 0.212174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062709Jy sigma=0.467991 ! Fit after self-cal, rms=0.062707Jy sigma=0.467977 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062707Jy sigma=0.467977 ! Fit after self-cal, rms=0.062850Jy sigma=0.465020 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9445 mas, bmaj=1.844 mas, bpa=-0.04085 degrees ! Estimated noise=0.390465 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.14505e-05 Jy ! Component: 100 - total flux cleaned = 4.66081e-05 Jy ! Component: 150 - total flux cleaned = 9.92702e-05 Jy ! Component: 200 - total flux cleaned = 0.000198186 Jy ! Total flux subtracted in 200 components = 0.000198186 Jy ! Clean residual min=-0.000772 max=0.000777 Jy/beam ! Clean residual mean=0.000000 rms=0.000176 Jy/beam ! Combined flux in latest and established models = 0.212372 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 70 components and 0.212372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062839Jy sigma=0.464898 ! Fit after self-cal, rms=0.062846Jy sigma=0.464882 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.14093e-06 Jy ! Component: 100 - total flux cleaned = 6.77002e-05 Jy ! Component: 150 - total flux cleaned = 0.00011008 Jy ! Component: 200 - total flux cleaned = 0.00015013 Jy ! Total flux subtracted in 200 components = 0.00015013 Jy ! Clean residual min=-0.000781 max=0.000780 Jy/beam ! Clean residual mean=0.000000 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 0.212522 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 74 components and 0.212522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062839Jy sigma=0.464822 ! Fit after self-cal, rms=0.062839Jy sigma=0.464819 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062839Jy sigma=0.464819 ! Fit after self-cal, rms=0.062875Jy sigma=0.464810 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.072 mas, bmaj=2.764 mas, bpa=-0.3404 degrees ! Estimated noise=0.478393 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000214727 Jy ! Component: 100 - total flux cleaned = 0.000265266 Jy ! Component: 150 - total flux cleaned = 0.000306456 Jy ! Component: 200 - total flux cleaned = 0.000351387 Jy ! Total flux subtracted in 200 components = 0.000351387 Jy ! Clean residual min=-0.000821 max=0.000771 Jy/beam ! Clean residual mean=0.000001 rms=0.000198 Jy/beam ! Combined flux in latest and established models = 0.212874 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 80 components and 0.212874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062876Jy sigma=0.464786 ! Fit after self-cal, rms=0.062875Jy sigma=0.464783 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.91475e-05 Jy ! Component: 100 - total flux cleaned = 0.000128133 Jy ! Component: 150 - total flux cleaned = 0.000157412 Jy ! Component: 200 - total flux cleaned = 0.000177286 Jy ! Total flux subtracted in 200 components = 0.000177286 Jy ! Clean residual min=-0.000806 max=0.000767 Jy/beam ! Clean residual mean=0.000001 rms=0.000196 Jy/beam ! Combined flux in latest and established models = 0.213051 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 83 components and 0.213051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062876Jy sigma=0.464776 ! Fit after self-cal, rms=0.062875Jy sigma=0.464774 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9445 mas, bmaj=1.844 mas, bpa=-0.01534 degrees ! Estimated noise=0.390462 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9445 x 1.844 at -0.01534 degrees (North through East) ! Clean map min=-0.00070095 max=0.18565 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7046 mas, bmaj=1.513 mas, bpa=-1.941 degrees ! Estimated noise=0.634447 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.139851 Jy ! Component: 100 - total flux cleaned = 0.174274 Jy ! Component: 150 - total flux cleaned = 0.189458 Jy ! Component: 200 - total flux cleaned = 0.197327 Jy ! Total flux subtracted in 200 components = 0.197327 Jy ! Clean residual min=-0.001630 max=0.004016 Jy/beam ! Clean residual mean=-0.000001 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 0.197327 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.197327 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9445 mas, bmaj=1.844 mas, bpa=-0.01534 degrees ! Estimated noise=0.390462 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00664579 Jy ! Component: 100 - total flux cleaned = 0.0101589 Jy ! Component: 150 - total flux cleaned = 0.0123104 Jy ! Component: 200 - total flux cleaned = 0.0137087 Jy ! Total flux subtracted in 200 components = 0.0137087 Jy ! Clean residual min=-0.000855 max=0.000841 Jy/beam ! Clean residual mean=-0.000000 rms=0.000187 Jy/beam ! Combined flux in latest and established models = 0.211036 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 29 components and 0.211036 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.072 mas, bmaj=2.764 mas, bpa=-0.3404 degrees ! Estimated noise=0.478393 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123577 Jy ! Component: 100 - total flux cleaned = 0.00182415 Jy ! Component: 150 - total flux cleaned = 0.00207017 Jy ! Component: 200 - total flux cleaned = 0.00222938 Jy ! Total flux subtracted in 200 components = 0.00222938 Jy ! Clean residual min=-0.000841 max=0.000766 Jy/beam ! Clean residual mean=0.000000 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.213265 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.20736e-05 Jy ! Component: 100 - total flux cleaned = 5.12842e-05 Jy ! Component: 150 - total flux cleaned = 6.83039e-05 Jy ! Component: 200 - total flux cleaned = 7.63024e-05 Jy ! Total flux subtracted in 200 components = 7.63024e-05 Jy ! Clean residual min=-0.000822 max=0.000778 Jy/beam ! Clean residual mean=0.000001 rms=0.000195 Jy/beam ! Combined flux in latest and established models = 0.213342 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 66 components and 0.213342 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9445 mas, bmaj=1.844 mas, bpa=-0.01534 degrees ! Estimated noise=0.390462 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00020581 Jy ! Component: 100 - total flux cleaned = -0.000246858 Jy ! Component: 150 - total flux cleaned = -0.000265651 Jy ! Component: 200 - total flux cleaned = -0.000283832 Jy ! Total flux subtracted in 200 components = -0.000283832 Jy ! Clean residual min=-0.000828 max=0.000801 Jy/beam ! Clean residual mean=0.000000 rms=0.000176 Jy/beam ! Combined flux in latest and established models = 0.213058 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 77 components and 0.213058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062886Jy sigma=0.464857 ! Fit after self-cal, rms=0.062879Jy sigma=0.464829 wmodel J0746+2549_X_a_map.mod ! Writing 77 model components to file: J0746+2549_X_a_map.mod wobs J0746+2549_X_a_uvs.fits ! Writing UV FITS file: J0746+2549_X_a_uvs.fits wwins J0746+2549_X_a_map.win ! wwins: Wrote 3 windows to J0746+2549_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000160036 Jy ! Component: 100 - total flux cleaned = -0.000213693 Jy ! Component: 150 - total flux cleaned = -0.000289541 Jy ! Component: 200 - total flux cleaned = -0.000375285 Jy ! Component: 250 - total flux cleaned = -0.000399282 Jy ! Component: 300 - total flux cleaned = -0.000434668 Jy ! Component: 350 - total flux cleaned = -0.000469295 Jy ! Component: 400 - total flux cleaned = -0.000435248 Jy ! Component: 450 - total flux cleaned = -0.000446729 Jy ! Component: 500 - total flux cleaned = -0.00045797 Jy ! Component: 550 - total flux cleaned = -0.000458117 Jy ! Component: 600 - total flux cleaned = -0.000490466 Jy ! Component: 650 - total flux cleaned = -0.000425945 Jy ! Component: 700 - total flux cleaned = -0.000458006 Jy ! Component: 750 - total flux cleaned = -0.000468536 Jy ! Component: 800 - total flux cleaned = -0.000447766 Jy ! Component: 850 - total flux cleaned = -0.000541321 Jy ! Component: 900 - total flux cleaned = -0.000541152 Jy ! Component: 950 - total flux cleaned = -0.000510474 Jy ! Component: 1000 - total flux cleaned = -0.000540973 Jy ! Component: 1050 - total flux cleaned = -0.000571216 Jy ! Component: 1100 - total flux cleaned = -0.000581304 Jy ! Component: 1150 - total flux cleaned = -0.000611066 Jy ! Component: 1200 - total flux cleaned = -0.000630879 Jy ! Component: 1250 - total flux cleaned = -0.000611292 Jy ! Component: 1300 - total flux cleaned = -0.000660208 Jy ! Component: 1350 - total flux cleaned = -0.000640731 Jy ! Component: 1400 - total flux cleaned = -0.000689082 Jy ! Component: 1450 - total flux cleaned = -0.000679492 Jy ! Component: 1500 - total flux cleaned = -0.000679432 Jy ! Component: 1550 - total flux cleaned = -0.000698463 Jy ! Component: 1600 - total flux cleaned = -0.000755254 Jy ! Component: 1650 - total flux cleaned = -0.000717533 Jy ! Component: 1700 - total flux cleaned = -0.000773938 Jy ! Component: 1750 - total flux cleaned = -0.000773915 Jy ! Component: 1800 - total flux cleaned = -0.000820388 Jy ! Component: 1850 - total flux cleaned = -0.00080198 Jy ! Component: 1900 - total flux cleaned = -0.000848024 Jy ! Component: 1950 - total flux cleaned = -0.000857173 Jy ! Component: 2000 - total flux cleaned = -0.000911964 Jy ! Component: 2050 - total flux cleaned = -0.000893726 Jy ! Component: 2100 - total flux cleaned = -0.000857567 Jy ! Component: 2150 - total flux cleaned = -0.000893627 Jy ! Component: 2200 - total flux cleaned = -0.000920585 Jy ! Component: 2250 - total flux cleaned = -0.000947497 Jy ! Component: 2300 - total flux cleaned = -0.000929693 Jy ! Component: 2350 - total flux cleaned = -0.000956366 Jy ! Component: 2400 - total flux cleaned = -0.00100062 Jy ! Component: 2450 - total flux cleaned = -0.000982982 Jy ! Component: 2500 - total flux cleaned = -0.000965367 Jy ! Component: 2550 - total flux cleaned = -0.00100914 Jy ! Component: 2600 - total flux cleaned = -0.000991675 Jy ! Component: 2650 - total flux cleaned = -0.000974374 Jy ! Component: 2700 - total flux cleaned = -0.00100898 Jy ! Component: 2750 - total flux cleaned = -0.00100037 Jy ! Component: 2800 - total flux cleaned = -0.00104333 Jy ! Component: 2850 - total flux cleaned = -0.0010605 Jy ! Component: 2900 - total flux cleaned = -0.00104345 Jy ! Component: 2950 - total flux cleaned = -0.00103496 Jy ! Component: 3000 - total flux cleaned = -0.00106038 Jy ! Component: 3050 - total flux cleaned = -0.00107733 Jy ! Component: 3100 - total flux cleaned = -0.00106052 Jy ! Component: 3150 - total flux cleaned = -0.00108571 Jy ! Component: 3200 - total flux cleaned = -0.00108572 Jy ! Component: 3250 - total flux cleaned = -0.00106903 Jy ! Component: 3300 - total flux cleaned = -0.00108564 Jy ! Component: 3350 - total flux cleaned = -0.00109396 Jy ! Component: 3400 - total flux cleaned = -0.0011105 Jy ! Component: 3450 - total flux cleaned = -0.00106098 Jy ! Component: 3500 - total flux cleaned = -0.00103628 Jy ! Component: 3550 - total flux cleaned = -0.00109368 Jy ! Component: 3600 - total flux cleaned = -0.00115912 Jy ! Component: 3650 - total flux cleaned = -0.00110208 Jy ! Component: 3700 - total flux cleaned = -0.00108577 Jy ! Component: 3750 - total flux cleaned = -0.00107767 Jy ! Component: 3800 - total flux cleaned = -0.00111007 Jy ! Component: 3850 - total flux cleaned = -0.00109396 Jy ! Component: 3900 - total flux cleaned = -0.00112614 Jy ! Component: 3950 - total flux cleaned = -0.0011181 Jy ! Component: 4000 - total flux cleaned = -0.00112607 Jy ! Component: 4050 - total flux cleaned = -0.0011101 Jy ! Total flux subtracted in 4096 components = -0.00114989 Jy ! Clean residual min=-0.000432 max=0.000452 Jy/beam ! Clean residual mean=0.000000 rms=0.000141 Jy/beam ! Combined flux in latest and established models = 0.211908 Jy keep ! Adding 341 model components to the UV plane model. ! The established model now contains 418 components and 0.211908 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J0746+2549_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9445 x 1.844 at -0.01534 degrees (North through East) ! Clean map min=-0.00071277 max=0.18593 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J0746+2549_X_a_map.fits wmodel /image_prod/ug002_uvm//J0746+2549_X_a_map.mod ! Writing 418 model components to file: /image_prod/ug002_uvm//J0746+2549_X_a_map.mod wobs /image_prod/ug002_uvm//J0746+2549_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J0746+2549_X_a_uvs.fits wwins /image_prod/ug002_uvm//J0746+2549_X_a_map.win ! wwins: Wrote 4 windows to /image_prod/ug002_uvm//J0746+2549_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.185925 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000141018 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.22754 0.22754 0.45508 0.91016 1.82032 3.64064 7.28128 14.5626 29.1251 58.2502 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.185 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1318.45 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J0746+2549_X_a_dfm.log closed on Wed Mar 4 16:49:31 2020