! Started logfile: /image_prod/ug002_uvm//J0725+1425_X_a_dfm.log on Wed Mar 4 16:47:55 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J0725+1425_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J0725+1425_X_a_uvm.fits ! AN table 1: 18 integrations on 36 of 36 possible baselines. ! AN table 2: 6 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.879404 visibilities/baseline/integration-bin. ! Found source: J0725+1425 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 7788 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0725+1425_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.128115Jy sigma=9.145161 ! Fit after self-cal, rms=0.541371Jy sigma=4.246412 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7295 mas, bmaj=1.613 mas, bpa=0.1127 degrees ! Estimated noise=1.3968 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.37922 Jy ! Component: 100 - total flux cleaned = 0.466069 Jy ! Total flux subtracted in 100 components = 0.466069 Jy ! Clean residual min=-0.030726 max=0.038244 Jy/beam ! Clean residual mean=-0.000030 rms=0.006923 Jy/beam ! Combined flux in latest and established models = 0.466069 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.466069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.173480Jy sigma=1.545046 ! Fit after self-cal, rms=0.173366Jy sigma=1.544277 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9006 mas, bmaj=1.908 mas, bpa=-0.8837 degrees ! Estimated noise=1.03134 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0412416 Jy ! Component: 100 - total flux cleaned = 0.0596126 Jy ! Component: 150 - total flux cleaned = 0.0680657 Jy ! Component: 200 - total flux cleaned = 0.0692079 Jy ! Total flux subtracted in 200 components = 0.0692079 Jy ! Clean residual min=-0.034551 max=0.041767 Jy/beam ! Clean residual mean=-0.000049 rms=0.009023 Jy/beam ! Combined flux in latest and established models = 0.535277 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 15 components and 0.535277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.165773Jy sigma=1.459795 ! Fit after self-cal, rms=0.165591Jy sigma=1.458199 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9006 x 1.908 at -0.8837 degrees (North through East) ! Clean map min=-0.033092 max=0.49047 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 0.97 KP 1.06 ! LA 1.40 MK 1.02 NL 1.15 OV 0.90 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.82 HN 0.74 LA 0.93 NL 1.10 ! OV 0.79 PT 0.82 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.97 KP 1.04 ! LA 1.41 MK 1.02 NL 1.17 OV 0.89 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.80 HN 0.74 LA 0.92 NL 1.09 ! OV 0.78 PT 0.83 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.95 KP 1.05 ! LA 1.33 MK 1.00 NL 1.15 OV 0.91 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.84 HN 0.73 LA 0.92 NL 1.11 ! OV 0.80 PT 0.84 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 0.96 KP 1.07 ! LA 1.43 MK 0.99 NL 1.17 OV 0.88 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.85 HN 0.74 LA 0.93 NL 1.09 ! OV 0.81 PT 0.83 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.97 KP 1.06 ! LA 1.41 MK 1.01 NL 1.15 OV 0.89 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.84 HN 0.75 LA 0.96 NL 1.08 ! OV 0.79 PT 0.84 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 0.95 KP 1.03 ! LA 1.35 MK 0.98 NL 1.17 OV 0.88 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.83 HN 0.75 LA 0.94 NL 1.11 ! OV 0.80 PT 0.84 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.95 KP 1.05 ! LA 1.43 MK 0.99 NL 1.20 OV 0.89 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.86 HN 0.77 LA 0.91 NL 1.09 ! OV 0.82 PT 0.81 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.96 KP 1.05 ! LA 1.35 MK 1.00 NL 1.14 OV 0.88 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.83 HN 0.79 LA 0.94 NL 1.09 ! OV 0.77 PT 0.82 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 0.94 KP 1.05 ! LA 1.37 MK 0.99 NL 1.13 OV 0.88 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.85 HN 0.78 LA 0.92 NL 1.10 ! OV 0.76 PT 0.85 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 0.97 KP 1.06 ! LA 1.37 MK 0.99 NL 1.15 OV 0.88 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.83 HN 0.73 LA 0.93 NL 1.10 ! OV 0.82 PT 0.88 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 0.95 KP 1.05 ! LA 1.35 MK 0.99 NL 1.14 OV 0.87 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.84 HN 0.77 LA 0.94 NL 1.11 ! OV 0.80 PT 0.86 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.97 HN 0.94 KP 1.08 ! LA 1.32 MK 0.99 NL 1.14 OV 0.89 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 HN 0.75 LA 0.92 NL 1.13 ! OV 0.78 PT 0.82 ! ! ! Fit before self-cal, rms=0.165591Jy sigma=1.458199 ! Fit after self-cal, rms=0.178596Jy sigma=1.077476 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9014 mas, bmaj=1.926 mas, bpa=-0.767 degrees ! Estimated noise=1.03081 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0042069 Jy ! Component: 100 - total flux cleaned = 0.00484698 Jy ! Component: 150 - total flux cleaned = 0.00571108 Jy ! Component: 200 - total flux cleaned = 0.00649895 Jy ! Total flux subtracted in 200 components = 0.00649895 Jy ! Clean residual min=-0.025932 max=0.028130 Jy/beam ! Clean residual mean=0.000011 rms=0.006510 Jy/beam ! Combined flux in latest and established models = 0.541776 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 20 components and 0.541776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.177170Jy sigma=1.069547 ! Fit after self-cal, rms=0.177244Jy sigma=1.068566 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.177244Jy sigma=1.068566 ! Fit after self-cal, rms=0.359205Jy sigma=0.939434 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8946 mas, bmaj=1.878 mas, bpa=-0.3618 degrees ! Estimated noise=1.08225 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0222734 Jy ! Component: 100 - total flux cleaned = 0.0332352 Jy ! Component: 150 - total flux cleaned = 0.0404145 Jy ! Component: 200 - total flux cleaned = 0.0453619 Jy ! Total flux subtracted in 200 components = 0.0453619 Jy ! Clean residual min=-0.027992 max=0.024631 Jy/beam ! Clean residual mean=-0.000031 rms=0.005910 Jy/beam ! Combined flux in latest and established models = 0.587138 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 45 components and 0.587138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.353022Jy sigma=0.953153 ! Fit after self-cal, rms=0.353538Jy sigma=0.951938 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00415436 Jy ! Component: 100 - total flux cleaned = 0.00533785 Jy ! Component: 150 - total flux cleaned = 0.00612608 Jy ! Component: 200 - total flux cleaned = 0.00643956 Jy ! Total flux subtracted in 200 components = 0.00643956 Jy ! Clean residual min=-0.028207 max=0.024323 Jy/beam ! Clean residual mean=-0.000031 rms=0.005938 Jy/beam ! Combined flux in latest and established models = 0.593577 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 0.593577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.352945Jy sigma=0.955964 ! Fit after self-cal, rms=0.352949Jy sigma=0.955703 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.352949Jy sigma=0.955703 ! Fit after self-cal, rms=0.179626Jy sigma=0.521481 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8973 mas, bmaj=1.879 mas, bpa=-0.2354 degrees ! Estimated noise=1.0863 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00256886 Jy ! Component: 100 - total flux cleaned = -0.00319848 Jy ! Component: 150 - total flux cleaned = -0.00366514 Jy ! Component: 200 - total flux cleaned = -0.00401059 Jy ! Total flux subtracted in 200 components = -0.00401059 Jy ! Clean residual min=-0.006766 max=0.021417 Jy/beam ! Clean residual mean=-0.000018 rms=0.002101 Jy/beam ! Combined flux in latest and established models = 0.589567 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 56 components and 0.589567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.179504Jy sigma=0.519134 ! Fit after self-cal, rms=0.179532Jy sigma=0.518558 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.6, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0194186 Jy ! Component: 100 - total flux cleaned = 0.0293009 Jy ! Component: 150 - total flux cleaned = 0.0356487 Jy ! Component: 200 - total flux cleaned = 0.0391841 Jy ! Total flux subtracted in 200 components = 0.0391841 Jy ! Clean residual min=-0.005628 max=0.008920 Jy/beam ! Clean residual mean=-0.000011 rms=0.001435 Jy/beam ! Combined flux in latest and established models = 0.628751 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 78 components and 0.628751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.177391Jy sigma=0.474614 ! Fit after self-cal, rms=0.177143Jy sigma=0.469296 ! Inverting map ! Added new window around map position (-3.8, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00841348 Jy ! Component: 100 - total flux cleaned = 0.0135846 Jy ! Component: 150 - total flux cleaned = 0.017052 Jy ! Component: 200 - total flux cleaned = 0.0195929 Jy ! Total flux subtracted in 200 components = 0.0195929 Jy ! Clean residual min=-0.005289 max=0.006258 Jy/beam ! Clean residual mean=-0.000005 rms=0.001145 Jy/beam ! Combined flux in latest and established models = 0.648344 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 110 components and 0.648344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.176662Jy sigma=0.458045 ! Fit after self-cal, rms=0.176583Jy sigma=0.456926 ! Inverting map ! Added new window around map position (-0.2, 13.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00402731 Jy ! Component: 100 - total flux cleaned = 0.00672081 Jy ! Component: 150 - total flux cleaned = 0.00822075 Jy ! Component: 200 - total flux cleaned = 0.00957413 Jy ! Total flux subtracted in 200 components = 0.00957413 Jy ! Clean residual min=-0.004964 max=0.004425 Jy/beam ! Clean residual mean=-0.000003 rms=0.001051 Jy/beam ! Combined flux in latest and established models = 0.657918 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 132 components and 0.657918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.176375Jy sigma=0.452698 ! Fit after self-cal, rms=0.176344Jy sigma=0.452477 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.176344Jy sigma=0.452477 ! Fit after self-cal, rms=0.175767Jy sigma=0.444868 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.938 mas, bmaj=2.769 mas, bpa=-1.636 degrees ! Estimated noise=1.38638 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00697496 Jy ! Component: 100 - total flux cleaned = 0.00820459 Jy ! Component: 150 - total flux cleaned = 0.00925977 Jy ! Component: 200 - total flux cleaned = 0.0104738 Jy ! Total flux subtracted in 200 components = 0.0104738 Jy ! Clean residual min=-0.004377 max=0.005275 Jy/beam ! Clean residual mean=-0.000002 rms=0.001281 Jy/beam ! Combined flux in latest and established models = 0.668392 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 163 components and 0.668392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.175638Jy sigma=0.442312 ! Fit after self-cal, rms=0.175577Jy sigma=0.441448 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129121 Jy ! Component: 100 - total flux cleaned = 0.00222772 Jy ! Component: 150 - total flux cleaned = 0.00277357 Jy ! Component: 200 - total flux cleaned = 0.00302564 Jy ! Total flux subtracted in 200 components = 0.00302564 Jy ! Clean residual min=-0.004177 max=0.004884 Jy/beam ! Clean residual mean=0.000001 rms=0.001190 Jy/beam ! Combined flux in latest and established models = 0.671417 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 180 components and 0.671417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.175531Jy sigma=0.440875 ! Fit after self-cal, rms=0.175517Jy sigma=0.440689 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8971 mas, bmaj=1.88 mas, bpa=-0.2843 degrees ! Estimated noise=1.08334 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8971 x 1.88 at -0.2843 degrees (North through East) ! Clean map min=-0.0027928 max=0.51045 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.175517Jy sigma=0.440689 ! Fit after self-cal, rms=0.229218Jy sigma=0.405689 ! Inverting map and beam ! Estimated beam: bmin=0.8983 mas, bmaj=1.882 mas, bpa=-0.2893 degrees ! Estimated noise=1.08208 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.95788e-05 Jy ! Component: 100 - total flux cleaned = -0.000349127 Jy ! Component: 150 - total flux cleaned = -0.000428979 Jy ! Component: 200 - total flux cleaned = -0.000497381 Jy ! Total flux subtracted in 200 components = -0.000497381 Jy ! Clean residual min=-0.002827 max=0.002771 Jy/beam ! Clean residual mean=-0.000000 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.67092 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 198 components and 0.67092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.229132Jy sigma=0.404059 ! Fit after self-cal, rms=0.229106Jy sigma=0.403998 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.03194e-05 Jy ! Component: 100 - total flux cleaned = 0.000198054 Jy ! Component: 150 - total flux cleaned = 0.000409433 Jy ! Component: 200 - total flux cleaned = 0.000608299 Jy ! Total flux subtracted in 200 components = 0.000608299 Jy ! Clean residual min=-0.002721 max=0.002718 Jy/beam ! Clean residual mean=0.000000 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.671528 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 209 components and 0.671528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.229072Jy sigma=0.403301 ! Fit after self-cal, rms=0.229069Jy sigma=0.403280 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.229069Jy sigma=0.403280 ! Fit after self-cal, rms=0.230113Jy sigma=0.402981 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7279 mas, bmaj=1.597 mas, bpa=1.05 degrees ! Estimated noise=1.43309 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.388787 Jy ! Component: 100 - total flux cleaned = 0.479747 Jy ! Component: 150 - total flux cleaned = 0.520259 Jy ! Component: 200 - total flux cleaned = 0.543968 Jy ! Total flux subtracted in 200 components = 0.543968 Jy ! Clean residual min=-0.007456 max=0.012901 Jy/beam ! Clean residual mean=-0.000008 rms=0.001771 Jy/beam ! Combined flux in latest and established models = 0.543968 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.543968 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8982 mas, bmaj=1.883 mas, bpa=-0.3124 degrees ! Estimated noise=1.08049 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0253415 Jy ! Component: 100 - total flux cleaned = 0.0426106 Jy ! Component: 150 - total flux cleaned = 0.0555921 Jy ! Component: 200 - total flux cleaned = 0.0658079 Jy ! Total flux subtracted in 200 components = 0.0658079 Jy ! Clean residual min=-0.004448 max=0.006513 Jy/beam ! Clean residual mean=-0.000011 rms=0.001280 Jy/beam ! Combined flux in latest and established models = 0.609776 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 48 components and 0.609776 Jy ! Inverting map ! Added new window around map position (23, -38.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00830445 Jy ! Component: 100 - total flux cleaned = 0.0151244 Jy ! Component: 150 - total flux cleaned = 0.0208742 Jy ! Component: 200 - total flux cleaned = 0.0258177 Jy ! Total flux subtracted in 200 components = 0.0258177 Jy ! Clean residual min=-0.003590 max=0.003404 Jy/beam ! Clean residual mean=-0.000006 rms=0.000888 Jy/beam ! Combined flux in latest and established models = 0.635594 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 85 components and 0.635594 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.937 mas, bmaj=2.775 mas, bpa=-1.592 degrees ! Estimated noise=1.38088 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00790924 Jy ! Component: 100 - total flux cleaned = 0.0135399 Jy ! Component: 150 - total flux cleaned = 0.0179325 Jy ! Component: 200 - total flux cleaned = 0.021348 Jy ! Total flux subtracted in 200 components = 0.021348 Jy ! Clean residual min=-0.003951 max=0.003946 Jy/beam ! Clean residual mean=-0.000004 rms=0.001121 Jy/beam ! Combined flux in latest and established models = 0.656942 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00212795 Jy ! Component: 100 - total flux cleaned = 0.00394132 Jy ! Component: 150 - total flux cleaned = 0.00550157 Jy ! Component: 200 - total flux cleaned = 0.0068537 Jy ! Total flux subtracted in 200 components = 0.0068537 Jy ! Clean residual min=-0.003741 max=0.003871 Jy/beam ! Clean residual mean=-0.000001 rms=0.001011 Jy/beam ! Combined flux in latest and established models = 0.663795 Jy ! Adding 109 model components to the UV plane model. ! The established model now contains 175 components and 0.663795 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8982 mas, bmaj=1.883 mas, bpa=-0.3124 degrees ! Estimated noise=1.08049 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209725 Jy ! Component: 100 - total flux cleaned = 0.00247304 Jy ! Component: 150 - total flux cleaned = 0.00301086 Jy ! Component: 200 - total flux cleaned = 0.00349632 Jy ! Total flux subtracted in 200 components = 0.00349632 Jy ! Clean residual min=-0.002989 max=0.002698 Jy/beam ! Clean residual mean=0.000000 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.667292 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 198 components and 0.667292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.230131Jy sigma=0.402330 ! Fit after self-cal, rms=0.230112Jy sigma=0.401705 wmodel J0725+1425_X_a_map.mod ! Writing 198 model components to file: J0725+1425_X_a_map.mod wobs J0725+1425_X_a_uvs.fits ! Writing UV FITS file: J0725+1425_X_a_uvs.fits wwins J0725+1425_X_a_map.win ! wwins: Wrote 5 windows to J0725+1425_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000210952 Jy ! Component: 100 - total flux cleaned = -0.00012225 Jy ! Component: 150 - total flux cleaned = -0.000164293 Jy ! Component: 200 - total flux cleaned = -8.26305e-05 Jy ! Component: 250 - total flux cleaned = -4.41119e-05 Jy ! Component: 300 - total flux cleaned = 0.000149566 Jy ! Component: 350 - total flux cleaned = 0.000451579 Jy ! Component: 400 - total flux cleaned = 0.000782915 Jy ! Component: 450 - total flux cleaned = 0.00107147 Jy ! Component: 500 - total flux cleaned = 0.00135305 Jy ! Component: 550 - total flux cleaned = 0.00152563 Jy ! Component: 600 - total flux cleaned = 0.00183151 Jy ! Component: 650 - total flux cleaned = 0.00199926 Jy ! Component: 700 - total flux cleaned = 0.00235993 Jy ! Component: 750 - total flux cleaned = 0.00261653 Jy ! Component: 800 - total flux cleaned = 0.00280529 Jy ! Component: 850 - total flux cleaned = 0.00302197 Jy ! Component: 900 - total flux cleaned = 0.00323616 Jy ! Component: 950 - total flux cleaned = 0.00341723 Jy ! Component: 1000 - total flux cleaned = 0.00374235 Jy ! Component: 1050 - total flux cleaned = 0.0038884 Jy ! Component: 1100 - total flux cleaned = 0.00411868 Jy ! Component: 1150 - total flux cleaned = 0.00431726 Jy ! Component: 1200 - total flux cleaned = 0.00437315 Jy ! Component: 1250 - total flux cleaned = 0.00459503 Jy ! Component: 1300 - total flux cleaned = 0.00462242 Jy ! Component: 1350 - total flux cleaned = 0.00470376 Jy ! Component: 1400 - total flux cleaned = 0.0048116 Jy ! Component: 1450 - total flux cleaned = 0.00481194 Jy ! Component: 1500 - total flux cleaned = 0.00502261 Jy ! Component: 1550 - total flux cleaned = 0.00512651 Jy ! Component: 1600 - total flux cleaned = 0.00522938 Jy ! Component: 1650 - total flux cleaned = 0.00528049 Jy ! Component: 1700 - total flux cleaned = 0.0053305 Jy ! Component: 1750 - total flux cleaned = 0.00538063 Jy ! Component: 1800 - total flux cleaned = 0.00543045 Jy ! Component: 1850 - total flux cleaned = 0.00550391 Jy ! Component: 1900 - total flux cleaned = 0.00555273 Jy ! Component: 1950 - total flux cleaned = 0.00562525 Jy ! Component: 2000 - total flux cleaned = 0.00560113 Jy ! Component: 2050 - total flux cleaned = 0.00576742 Jy ! Component: 2100 - total flux cleaned = 0.00586174 Jy ! Component: 2150 - total flux cleaned = 0.0059084 Jy ! Component: 2200 - total flux cleaned = 0.00602434 Jy ! Component: 2250 - total flux cleaned = 0.0061625 Jy ! Component: 2300 - total flux cleaned = 0.00623097 Jy ! Component: 2350 - total flux cleaned = 0.00625373 Jy ! Component: 2400 - total flux cleaned = 0.00645576 Jy ! Component: 2450 - total flux cleaned = 0.00656705 Jy ! Component: 2500 - total flux cleaned = 0.00663366 Jy ! Component: 2550 - total flux cleaned = 0.00683111 Jy ! Component: 2600 - total flux cleaned = 0.00693973 Jy ! Component: 2650 - total flux cleaned = 0.0069829 Jy ! Component: 2700 - total flux cleaned = 0.00721882 Jy ! Component: 2750 - total flux cleaned = 0.0073253 Jy ! Component: 2800 - total flux cleaned = 0.00745242 Jy ! Component: 2850 - total flux cleaned = 0.0075362 Jy ! Component: 2900 - total flux cleaned = 0.00766097 Jy ! Component: 2950 - total flux cleaned = 0.00780567 Jy ! Component: 3000 - total flux cleaned = 0.0079492 Jy ! Component: 3050 - total flux cleaned = 0.00805116 Jy ! Component: 3100 - total flux cleaned = 0.00805126 Jy ! Component: 3150 - total flux cleaned = 0.00823223 Jy ! Component: 3200 - total flux cleaned = 0.00833224 Jy ! Component: 3250 - total flux cleaned = 0.00839182 Jy ! Component: 3300 - total flux cleaned = 0.00851017 Jy ! Component: 3350 - total flux cleaned = 0.00854948 Jy ! Component: 3400 - total flux cleaned = 0.00862737 Jy ! Component: 3450 - total flux cleaned = 0.0086274 Jy ! Component: 3500 - total flux cleaned = 0.00872376 Jy ! Component: 3550 - total flux cleaned = 0.00889608 Jy ! Component: 3600 - total flux cleaned = 0.00891519 Jy ! Component: 3650 - total flux cleaned = 0.00895307 Jy ! Component: 3700 - total flux cleaned = 0.00908499 Jy ! Component: 3750 - total flux cleaned = 0.00915982 Jy ! Component: 3800 - total flux cleaned = 0.00929011 Jy ! Component: 3850 - total flux cleaned = 0.00930856 Jy ! Component: 3900 - total flux cleaned = 0.00930852 Jy ! Component: 3950 - total flux cleaned = 0.0094003 Jy ! Component: 4000 - total flux cleaned = 0.0094368 Jy ! Component: 4050 - total flux cleaned = 0.00950943 Jy ! Total flux subtracted in 4096 components = 0.00954559 Jy ! Clean residual min=-0.000963 max=0.001203 Jy/beam ! Clean residual mean=0.000000 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.676837 Jy keep ! Adding 323 model components to the UV plane model. ! The established model now contains 521 components and 0.676837 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J0725+1425_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8982 x 1.883 at -0.3124 degrees (North through East) ! Clean map min=-0.0018118 max=0.51383 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J0725+1425_X_a_map.fits wmodel /image_prod/ug002_uvm//J0725+1425_X_a_map.mod ! Writing 521 model components to file: /image_prod/ug002_uvm//J0725+1425_X_a_map.mod wobs /image_prod/ug002_uvm//J0725+1425_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J0725+1425_X_a_uvs.fits wwins /image_prod/ug002_uvm//J0725+1425_X_a_map.win ! wwins: Wrote 6 windows to /image_prod/ug002_uvm//J0725+1425_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.513831 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000317274 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.18524 0.18524 0.370481 0.740962 1.48192 2.96385 5.92769 11.8554 23.7108 47.4215 94.8431 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.513 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1619.52 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J0725+1425_X_a_dfm.log closed on Wed Mar 4 16:48:00 2020