! Started logfile: /image_prod/ug002_uvm//J0725+1425_S_a_dfm.log on Wed Mar  4 16:47:50 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uvm//J0725+1425_S_a_uvm.fits
! Reading UV FITS file: /image_prod/ug002_uvm//J0725+1425_S_a_uvm.fits
! AN table 1: 18 integrations on 36 of 36 possible baselines.
! AN table 2: 6 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.879404 visibilities/baseline/integration-bin.
! Found source: J0725+1425
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 1947 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0725+1425_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 11 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 11 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 11 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.084281Jy  sigma=8.626551
! Fit after  self-cal, rms=0.620593Jy  sigma=4.950899
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.123 mas, bmaj=6.768 mas, bpa=-2.057 degrees
! Estimated noise=2.4837 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.304921 Jy
! Component: 100  -  total flux cleaned = 0.408833 Jy
! Total flux subtracted in 100 components = 0.408833 Jy
! Clean residual min=-0.023854 max=0.056326 Jy/beam
! Clean residual mean=-0.000038 rms=0.007733 Jy/beam
! Combined flux in latest and established models = 0.408833 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.408833 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.164798Jy  sigma=1.192641
! Fit after  self-cal, rms=0.163656Jy  sigma=1.184359
! Inverting map 
! Added new window around map position (-4, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0605808 Jy
! Component: 100  -  total flux cleaned = 0.0944962 Jy
! Total flux subtracted in 100 components = 0.0944962 Jy
! Clean residual min=-0.019431 max=0.026704 Jy/beam
! Clean residual mean=-0.000033 rms=0.005798 Jy/beam
! Combined flux in latest and established models = 0.50333 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 16 components and 0.50333 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.138737Jy  sigma=0.998992
! Fit after  self-cal, rms=0.137630Jy  sigma=0.989838
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.519 mas, bmaj=7.653 mas, bpa=-3.042 degrees
! Estimated noise=2.15809 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0223729 Jy
! Component: 100  -  total flux cleaned = 0.0353934 Jy
! Component: 150  -  total flux cleaned = 0.0439811 Jy
! Component: 200  -  total flux cleaned = 0.049936 Jy
! Total flux subtracted in 200 components = 0.049936 Jy
! Clean residual min=-0.019291 max=0.029256 Jy/beam
! Clean residual mean=-0.000045 rms=0.006536 Jy/beam
! Combined flux in latest and established models = 0.553266 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 28 components and 0.553266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.132689Jy  sigma=0.963155
! Fit after  self-cal, rms=0.132490Jy  sigma=0.961246
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.519 x 7.653 at -3.042 degrees (North through East)
! Clean map  min=-0.018617  max=0.39575 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.98     HN        0.95     KP        0.92     
!   LA        1.32     MK        1.04     NL        0.96     OV        0.76     
!   SC        1.06     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.08     HN        1.21     LA        0.95     NL        1.08     
!   OV        0.98     PT        0.93     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.29     FD        0.96     HN        0.97     KP        0.98     
!   LA        1.33     MK        1.05     NL        0.95     OV        0.81     
!   SC        0.79     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     HN        1.15     LA        0.97     NL        1.10     
!   OV        0.94     PT        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.95     HN        0.96     KP        0.99     
!   LA        1.31     MK        0.98     NL        1.04     OV        0.84     
!   SC        1.03     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     HN        1.15     LA        0.99     NL        1.05     
!   OV        0.95     PT        0.94     
! 
! 
! Fit before self-cal, rms=0.132490Jy  sigma=0.961246
! Fit after  self-cal, rms=0.123386Jy  sigma=0.785766
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.505 mas, bmaj=7.623 mas, bpa=-2.625 degrees
! Estimated noise=2.16731 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00689574 Jy
! Component: 100  -  total flux cleaned = 0.00894775 Jy
! Component: 150  -  total flux cleaned = 0.00932057 Jy
! Component: 200  -  total flux cleaned = 0.00965653 Jy
! Total flux subtracted in 200 components = 0.00965653 Jy
! Clean residual min=-0.020087 max=0.021252 Jy/beam
! Clean residual mean=-0.000051 rms=0.005015 Jy/beam
! Combined flux in latest and established models = 0.562922 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 37 components and 0.562922 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.122484Jy  sigma=0.784574
! Fit after  self-cal, rms=0.122579Jy  sigma=0.783802
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.122579Jy  sigma=0.783802
! Fit after  self-cal, rms=0.104003Jy  sigma=0.597361
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.499 mas, bmaj=7.595 mas, bpa=-3.16 degrees
! Estimated noise=2.21374 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00927927 Jy
! Component: 100  -  total flux cleaned = 0.0143911 Jy
! Component: 150  -  total flux cleaned = 0.0176843 Jy
! Component: 200  -  total flux cleaned = 0.018701 Jy
! Total flux subtracted in 200 components = 0.018701 Jy
! Clean residual min=-0.011825 max=0.013361 Jy/beam
! Clean residual mean=-0.000046 rms=0.003057 Jy/beam
! Combined flux in latest and established models = 0.581623 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 56 components and 0.581623 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102569Jy  sigma=0.593322
! Fit after  self-cal, rms=0.102674Jy  sigma=0.592786
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-12.5, -4.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0147371 Jy
! Component: 100  -  total flux cleaned = 0.0233697 Jy
! Component: 150  -  total flux cleaned = 0.0290521 Jy
! Component: 200  -  total flux cleaned = 0.0313907 Jy
! Total flux subtracted in 200 components = 0.0313907 Jy
! Clean residual min=-0.011692 max=0.009054 Jy/beam
! Clean residual mean=-0.000043 rms=0.002804 Jy/beam
! Combined flux in latest and established models = 0.613014 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 85 components and 0.613014 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099886Jy  sigma=0.573204
! Fit after  self-cal, rms=0.099481Jy  sigma=0.569424
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099481Jy  sigma=0.569424
! Fit after  self-cal, rms=0.079583Jy  sigma=0.481383
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.474 mas, bmaj=7.552 mas, bpa=-2.796 degrees
! Estimated noise=2.20011 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00733068 Jy
! Component: 100  -  total flux cleaned = 0.0115794 Jy
! Component: 150  -  total flux cleaned = 0.0134647 Jy
! Component: 200  -  total flux cleaned = 0.0139193 Jy
! Total flux subtracted in 200 components = 0.0139193 Jy
! Clean residual min=-0.005309 max=0.005750 Jy/beam
! Clean residual mean=0.000003 rms=0.001395 Jy/beam
! Combined flux in latest and established models = 0.626933 Jy
selfcal
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 129 components and 0.626933 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078667Jy  sigma=0.473842
! Fit after  self-cal, rms=0.078553Jy  sigma=0.472587
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-112, -90.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00545356 Jy
! Component: 100  -  total flux cleaned = 0.00815853 Jy
! Component: 150  -  total flux cleaned = 0.00945594 Jy
! Component: 200  -  total flux cleaned = 0.0102983 Jy
! Total flux subtracted in 200 components = 0.0102983 Jy
! Clean residual min=-0.005063 max=0.005190 Jy/beam
! Clean residual mean=0.000003 rms=0.001270 Jy/beam
! Combined flux in latest and established models = 0.637232 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 148 components and 0.637232 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078103Jy  sigma=0.467408
! Fit after  self-cal, rms=0.078051Jy  sigma=0.466952
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078051Jy  sigma=0.466952
! Fit after  self-cal, rms=0.077682Jy  sigma=0.465473
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.847 mas, bmaj=10.88 mas, bpa=-4.812 degrees
! Estimated noise=2.68664 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00511045 Jy
! Component: 100  -  total flux cleaned = 0.00813535 Jy
! Component: 150  -  total flux cleaned = 0.00948831 Jy
! Component: 200  -  total flux cleaned = 0.0107346 Jy
! Total flux subtracted in 200 components = 0.0107346 Jy
! Clean residual min=-0.006912 max=0.006517 Jy/beam
! Clean residual mean=0.000005 rms=0.001660 Jy/beam
! Combined flux in latest and established models = 0.647966 Jy
selfcal
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 195 components and 0.647966 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077529Jy  sigma=0.463783
! Fit after  self-cal, rms=0.077480Jy  sigma=0.463345
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00140449 Jy
! Component: 100  -  total flux cleaned = 0.00259336 Jy
! Component: 150  -  total flux cleaned = 0.00348541 Jy
! Component: 200  -  total flux cleaned = 0.00426961 Jy
! Total flux subtracted in 200 components = 0.00426961 Jy
! Clean residual min=-0.006843 max=0.006285 Jy/beam
! Clean residual mean=0.000007 rms=0.001622 Jy/beam
! Combined flux in latest and established models = 0.652236 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 218 components and 0.652236 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077451Jy  sigma=0.462645
! Fit after  self-cal, rms=0.077414Jy  sigma=0.462476
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.471 mas, bmaj=7.55 mas, bpa=-2.797 degrees
! Estimated noise=2.19735 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.471 x 7.55 at -2.797 degrees (North through East)
! Clean map  min=-0.0045102  max=0.40059 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.091 mas, bmaj=6.681 mas, bpa=-2.011 degrees
! Estimated noise=2.48308 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.305477 Jy
! Component: 100  -  total flux cleaned = 0.416918 Jy
! Component: 150  -  total flux cleaned = 0.477762 Jy
! Component: 200  -  total flux cleaned = 0.513469 Jy
! Total flux subtracted in 200 components = 0.513469 Jy
! Clean residual min=-0.010872 max=0.018715 Jy/beam
! Clean residual mean=-0.000015 rms=0.003045 Jy/beam
! Combined flux in latest and established models = 0.513469 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.513469 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.471 mas, bmaj=7.55 mas, bpa=-2.797 degrees
! Estimated noise=2.19735 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0291272 Jy
! Component: 100  -  total flux cleaned = 0.0496058 Jy
! Component: 150  -  total flux cleaned = 0.0649608 Jy
! Component: 200  -  total flux cleaned = 0.0770237 Jy
! Total flux subtracted in 200 components = 0.0770237 Jy
! Clean residual min=-0.006508 max=0.007448 Jy/beam
! Clean residual mean=-0.000006 rms=0.001808 Jy/beam
! Combined flux in latest and established models = 0.590493 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 67 components and 0.590493 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.847 mas, bmaj=10.88 mas, bpa=-4.812 degrees
! Estimated noise=2.68664 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0164544 Jy
! Component: 100  -  total flux cleaned = 0.0273066 Jy
! Component: 150  -  total flux cleaned = 0.0352575 Jy
! Component: 200  -  total flux cleaned = 0.041251 Jy
! Total flux subtracted in 200 components = 0.041251 Jy
! Clean residual min=-0.007330 max=0.006059 Jy/beam
! Clean residual mean=-0.000004 rms=0.001842 Jy/beam
! Combined flux in latest and established models = 0.631744 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00458608 Jy
! Component: 100  -  total flux cleaned = 0.00815945 Jy
! Component: 150  -  total flux cleaned = 0.0110129 Jy
! Component: 200  -  total flux cleaned = 0.0133267 Jy
! Total flux subtracted in 200 components = 0.0133267 Jy
! Clean residual min=-0.007209 max=0.006008 Jy/beam
! Clean residual mean=-0.000001 rms=0.001664 Jy/beam
! Combined flux in latest and established models = 0.645071 Jy
! Adding 132 model components to the UV plane model.
! The established model now contains 189 components and 0.645071 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.471 mas, bmaj=7.55 mas, bpa=-2.797 degrees
! Estimated noise=2.19735 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00267071 Jy
! Component: 100  -  total flux cleaned = 0.00291476 Jy
! Component: 150  -  total flux cleaned = 0.00291895 Jy
! Component: 200  -  total flux cleaned = 0.00301149 Jy
! Total flux subtracted in 200 components = 0.00301149 Jy
! Clean residual min=-0.005534 max=0.005159 Jy/beam
! Clean residual mean=0.000004 rms=0.001206 Jy/beam
! Combined flux in latest and established models = 0.648082 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 209 components and 0.648082 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077557Jy  sigma=0.464296
! Fit after  self-cal, rms=0.077434Jy  sigma=0.463544
wmodel J0725+1425_S_a_map.mod
! Writing 209 model components to file: J0725+1425_S_a_map.mod
wobs   J0725+1425_S_a_uvs.fits
! Writing UV FITS file: J0725+1425_S_a_uvs.fits
wwins  J0725+1425_S_a_map.win
! wwins: Wrote 4 windows to J0725+1425_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00030975 Jy
! Component: 100  -  total flux cleaned = -0.000799288 Jy
! Component: 150  -  total flux cleaned = -0.001191 Jy
! Component: 200  -  total flux cleaned = -0.00155736 Jy
! Component: 250  -  total flux cleaned = -0.00169614 Jy
! Component: 300  -  total flux cleaned = -0.00182914 Jy
! Component: 350  -  total flux cleaned = -0.00209254 Jy
! Component: 400  -  total flux cleaned = -0.00234904 Jy
! Component: 450  -  total flux cleaned = -0.00260106 Jy
! Component: 500  -  total flux cleaned = -0.00284732 Jy
! Component: 550  -  total flux cleaned = -0.00314708 Jy
! Component: 600  -  total flux cleaned = -0.00338156 Jy
! Component: 650  -  total flux cleaned = -0.0036104 Jy
! Component: 700  -  total flux cleaned = -0.00377886 Jy
! Component: 750  -  total flux cleaned = -0.00394496 Jy
! Component: 800  -  total flux cleaned = -0.00421673 Jy
! Component: 850  -  total flux cleaned = -0.00453735 Jy
! Component: 900  -  total flux cleaned = -0.00485255 Jy
! Component: 950  -  total flux cleaned = -0.00505958 Jy
! Component: 1000  -  total flux cleaned = -0.00521169 Jy
! Component: 1050  -  total flux cleaned = -0.00511231 Jy
! Component: 1100  -  total flux cleaned = -0.0052617 Jy
! Component: 1150  -  total flux cleaned = -0.00540616 Jy
! Component: 1200  -  total flux cleaned = -0.00526246 Jy
! Component: 1250  -  total flux cleaned = -0.00535719 Jy
! Component: 1300  -  total flux cleaned = -0.00559004 Jy
! Component: 1350  -  total flux cleaned = -0.0056366 Jy
! Component: 1400  -  total flux cleaned = -0.00568154 Jy
! Component: 1450  -  total flux cleaned = -0.00595067 Jy
! Component: 1500  -  total flux cleaned = -0.0059945 Jy
! Component: 1550  -  total flux cleaned = -0.00608194 Jy
! Component: 1600  -  total flux cleaned = -0.0061676 Jy
! Component: 1650  -  total flux cleaned = -0.00616755 Jy
! Component: 1700  -  total flux cleaned = -0.00625291 Jy
! Component: 1750  -  total flux cleaned = -0.00637783 Jy
! Component: 1800  -  total flux cleaned = -0.00654249 Jy
! Component: 1850  -  total flux cleaned = -0.00658339 Jy
! Component: 1900  -  total flux cleaned = -0.0067435 Jy
! Component: 1950  -  total flux cleaned = -0.00682361 Jy
! Component: 2000  -  total flux cleaned = -0.00698069 Jy
! Component: 2050  -  total flux cleaned = -0.00725221 Jy
! Component: 2100  -  total flux cleaned = -0.00740552 Jy
! Component: 2150  -  total flux cleaned = -0.00744363 Jy
! Component: 2200  -  total flux cleaned = -0.00755593 Jy
! Component: 2250  -  total flux cleaned = -0.00770506 Jy
! Component: 2300  -  total flux cleaned = -0.00792598 Jy
! Component: 2350  -  total flux cleaned = -0.00788917 Jy
! Component: 2400  -  total flux cleaned = -0.00799775 Jy
! Component: 2450  -  total flux cleaned = -0.00806969 Jy
! Component: 2500  -  total flux cleaned = -0.00824652 Jy
! Component: 2550  -  total flux cleaned = -0.00835168 Jy
! Component: 2600  -  total flux cleaned = -0.0084556 Jy
! Component: 2650  -  total flux cleaned = -0.00869651 Jy
! Component: 2700  -  total flux cleaned = -0.00879859 Jy
! Component: 2750  -  total flux cleaned = -0.00879853 Jy
! Component: 2800  -  total flux cleaned = -0.00896556 Jy
! Component: 2850  -  total flux cleaned = -0.00899829 Jy
! Component: 2900  -  total flux cleaned = -0.00906488 Jy
! Component: 2950  -  total flux cleaned = -0.00926082 Jy
! Component: 3000  -  total flux cleaned = -0.00926059 Jy
! Component: 3050  -  total flux cleaned = -0.00948582 Jy
! Component: 3100  -  total flux cleaned = -0.00961347 Jy
! Component: 3150  -  total flux cleaned = -0.00967672 Jy
! Component: 3200  -  total flux cleaned = -0.00977088 Jy
! Component: 3250  -  total flux cleaned = -0.00986382 Jy
! Component: 3300  -  total flux cleaned = -0.00986367 Jy
! Component: 3350  -  total flux cleaned = -0.00992464 Jy
! Component: 3400  -  total flux cleaned = -0.0100765 Jy
! Component: 3450  -  total flux cleaned = -0.0102273 Jy
! Component: 3500  -  total flux cleaned = -0.0103167 Jy
! Component: 3550  -  total flux cleaned = -0.0104058 Jy
! Component: 3600  -  total flux cleaned = -0.010524 Jy
! Component: 3650  -  total flux cleaned = -0.010524 Jy
! Component: 3700  -  total flux cleaned = -0.0106696 Jy
! Component: 3750  -  total flux cleaned = -0.0107567 Jy
! Component: 3800  -  total flux cleaned = -0.010728 Jy
! Component: 3850  -  total flux cleaned = -0.0109275 Jy
! Component: 3900  -  total flux cleaned = -0.0109845 Jy
! Component: 3950  -  total flux cleaned = -0.0110686 Jy
! Component: 4000  -  total flux cleaned = -0.0110969 Jy
! Component: 4050  -  total flux cleaned = -0.0112353 Jy
! Total flux subtracted in 4096 components = -0.0111802 Jy
! Clean residual min=-0.001454 max=0.001662 Jy/beam
! Clean residual mean=0.000001 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.636902 Jy
keep
! Adding 284 model components to the UV plane model.
! The established model now contains 493 components and 0.636902 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uvm//J0725+1425_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.471 x 7.55 at -2.797 degrees (North through East)
! Clean map  min=-0.0040229  max=0.40047 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uvm//J0725+1425_S_a_map.fits
wmodel /image_prod/ug002_uvm//J0725+1425_S_a_map.mod
! Writing 493 model components to file: /image_prod/ug002_uvm//J0725+1425_S_a_map.mod
wobs   /image_prod/ug002_uvm//J0725+1425_S_a_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uvm//J0725+1425_S_a_uvs.fits
wwins  /image_prod/ug002_uvm//J0725+1425_S_a_map.win
! wwins: Wrote 5 windows to /image_prod/ug002_uvm//J0725+1425_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.400469 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000503819 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.377422 0.377422 0.754843 1.50969 3.01937 6.03875 12.0775 24.155 48.31 96.62
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0015 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.4 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  794.866 
quit
! Quitting program
! Log file /image_prod/ug002_uvm//J0725+1425_S_a_dfm.log closed on Wed Mar  4 16:47:54 2020