! Started logfile: /image_prod/ug002_uvm//J0719-3928_S_a_dfm.log on Wed Mar  4 16:47:23 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uvm//J0719-3928_S_a_uvm.fits
! Reading UV FITS file: /image_prod/ug002_uvm//J0719-3928_S_a_uvm.fits
! AN table 1: 75 integrations on 10 of 10 possible baselines.
! AN table 2: 100 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.812889 visibilities/baseline/integration-bin.
! Found source: J0719-3928
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5487 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0719-3928_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 43 telescope corrections were flagged in sub-array 1.
!  A total of 54 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 43 telescope corrections were flagged in sub-array 1.
!  A total of 54 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 43 telescope corrections were flagged in sub-array 1.
!  A total of 54 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.020208Jy  sigma=6.350856
! Fit after  self-cal, rms=0.792423Jy  sigma=4.822420
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.818 mas, bmaj=48.09 mas, bpa=-3.273 degrees
! Estimated noise=2.01494 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.171623 Jy
! Component: 100  -  total flux cleaned = 0.244056 Jy
! Total flux subtracted in 100 components = 0.244056 Jy
! Clean residual min=-0.015520 max=0.036145 Jy/beam
! Clean residual mean=-0.000601 rms=0.007985 Jy/beam
! Combined flux in latest and established models = 0.244056 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 48 components and 0.244056 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.111153Jy  sigma=0.670027
! Fit after  self-cal, rms=0.110466Jy  sigma=0.665476
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.24 mas, bmaj=55.04 mas, bpa=-2.621 degrees
! Estimated noise=1.55248 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0491735 Jy
! Component: 100  -  total flux cleaned = 0.0761632 Jy
! Component: 150  -  total flux cleaned = 0.0916061 Jy
! Component: 200  -  total flux cleaned = 0.101421 Jy
! Total flux subtracted in 200 components = 0.101421 Jy
! Clean residual min=-0.007831 max=0.013571 Jy/beam
! Clean residual mean=-0.000182 rms=0.002717 Jy/beam
! Combined flux in latest and established models = 0.345477 Jy
! Performing phase self-cal
! Adding 112 model components to the UV plane model.
! The established model now contains 156 components and 0.345477 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088672Jy  sigma=0.496185
! Fit after  self-cal, rms=0.088247Jy  sigma=0.493921
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 10.24 x 55.04 at -2.621 degrees (North through East)
! Clean map  min=-0.0070716  max=0.22272 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     KP        1.00     LA        0.91     OV        1.10     
!   PT        0.93     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.98     KP        1.04     LA        1.02     NL        1.14     
!   OV        1.10     PT        1.05     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     KP        0.95     LA        0.91     OV        1.09     
!   PT        0.93     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.98     KP        1.02     LA        1.02     NL        0.83     
!   OV        1.05     PT        1.03     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     KP        0.96     LA        0.89     OV        1.09     
!   PT        0.92     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.98     KP        1.06     LA        1.02     NL        1.03     
!   OV        1.01     PT        0.99     
! 
! 
! Fit before self-cal, rms=0.088247Jy  sigma=0.493921
! Fit after  self-cal, rms=0.085614Jy  sigma=0.469835
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.35 mas, bmaj=55.22 mas, bpa=-2.662 degrees
! Estimated noise=1.54823 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00136653 Jy
! Component: 100  -  total flux cleaned = 0.00138229 Jy
! Component: 150  -  total flux cleaned = 0.00132216 Jy
! Component: 200  -  total flux cleaned = 0.00120777 Jy
! Total flux subtracted in 200 components = 0.00120777 Jy
! Clean residual min=-0.004559 max=0.005544 Jy/beam
! Clean residual mean=0.000073 rms=0.001416 Jy/beam
! Combined flux in latest and established models = 0.346685 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 195 components and 0.346685 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085469Jy  sigma=0.468836
! Fit after  self-cal, rms=0.085498Jy  sigma=0.468757
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085498Jy  sigma=0.468757
! Fit after  self-cal, rms=0.085740Jy  sigma=0.467181
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.34 mas, bmaj=55.12 mas, bpa=-2.78 degrees
! Estimated noise=1.54712 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000515087 Jy
! Component: 100  -  total flux cleaned = -0.000465849 Jy
! Component: 150  -  total flux cleaned = -0.000330613 Jy
! Component: 200  -  total flux cleaned = -0.0002053 Jy
! Total flux subtracted in 200 components = -0.0002053 Jy
! Clean residual min=-0.003829 max=0.004943 Jy/beam
! Clean residual mean=0.000035 rms=0.001197 Jy/beam
! Combined flux in latest and established models = 0.34648 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 202 components and 0.34648 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085692Jy  sigma=0.466882
! Fit after  self-cal, rms=0.085705Jy  sigma=0.466869
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.74204e-05 Jy
! Component: 100  -  total flux cleaned = 0.000156169 Jy
! Component: 150  -  total flux cleaned = 0.00026765 Jy
! Component: 200  -  total flux cleaned = 0.000372892 Jy
! Total flux subtracted in 200 components = 0.000372892 Jy
! Clean residual min=-0.003794 max=0.004736 Jy/beam
! Clean residual mean=0.000038 rms=0.001178 Jy/beam
! Combined flux in latest and established models = 0.346853 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 211 components and 0.346853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085674Jy  sigma=0.466691
! Fit after  self-cal, rms=0.085676Jy  sigma=0.466687
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085676Jy  sigma=0.466687
! Fit after  self-cal, rms=0.084725Jy  sigma=0.466360
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.28 mas, bmaj=54.9 mas, bpa=-2.978 degrees
! Estimated noise=1.53829 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000313719 Jy
! Component: 100  -  total flux cleaned = 0.000383778 Jy
! Component: 150  -  total flux cleaned = 0.000445902 Jy
! Component: 200  -  total flux cleaned = 0.000502159 Jy
! Total flux subtracted in 200 components = 0.000502159 Jy
! Clean residual min=-0.003495 max=0.004331 Jy/beam
! Clean residual mean=0.000032 rms=0.001109 Jy/beam
! Combined flux in latest and established models = 0.347355 Jy
selfcal
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 244 components and 0.347355 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084700Jy  sigma=0.466187
! Fit after  self-cal, rms=0.084703Jy  sigma=0.466182
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.84563e-05 Jy
! Component: 100  -  total flux cleaned = 8.20721e-05 Jy
! Component: 150  -  total flux cleaned = 8.21345e-05 Jy
! Component: 200  -  total flux cleaned = 5.77526e-05 Jy
! Total flux subtracted in 200 components = 5.77526e-05 Jy
! Clean residual min=-0.003456 max=0.004191 Jy/beam
! Clean residual mean=0.000032 rms=0.001093 Jy/beam
! Combined flux in latest and established models = 0.347412 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 255 components and 0.347412 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084688Jy  sigma=0.466089
! Fit after  self-cal, rms=0.084688Jy  sigma=0.466088
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084688Jy  sigma=0.466088
! Fit after  self-cal, rms=0.084075Jy  sigma=0.466058
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.49 mas, bmaj=58.12 mas, bpa=-2.374 degrees
! Estimated noise=1.52597 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00132126 Jy
! Component: 100  -  total flux cleaned = 0.00144877 Jy
! Component: 150  -  total flux cleaned = 0.00147578 Jy
! Component: 200  -  total flux cleaned = 0.00152309 Jy
! Total flux subtracted in 200 components = 0.00152309 Jy
! Clean residual min=-0.003215 max=0.003655 Jy/beam
! Clean residual mean=0.000041 rms=0.001031 Jy/beam
! Combined flux in latest and established models = 0.348936 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 276 components and 0.348935 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084075Jy  sigma=0.465920
! Fit after  self-cal, rms=0.084071Jy  sigma=0.465913
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.50091e-05 Jy
! Component: 100  -  total flux cleaned = 2.21405e-05 Jy
! Component: 150  -  total flux cleaned = 8.46568e-07 Jy
! Component: 200  -  total flux cleaned = -3.86543e-05 Jy
! Total flux subtracted in 200 components = -3.86543e-05 Jy
! Clean residual min=-0.003190 max=0.003537 Jy/beam
! Clean residual mean=0.000042 rms=0.001011 Jy/beam
! Combined flux in latest and established models = 0.348897 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 280 components and 0.348897 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084070Jy  sigma=0.465847
! Fit after  self-cal, rms=0.084068Jy  sigma=0.465845
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=10.26 mas, bmaj=54.86 mas, bpa=-3.036 degrees
! Estimated noise=1.53398 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 10.26 x 54.86 at -3.036 degrees (North through East)
! Clean map  min=-0.0032681  max=0.21788 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.808 mas, bmaj=48.03 mas, bpa=-3.768 degrees
! Estimated noise=1.98156 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.169303 Jy
! Component: 100  -  total flux cleaned = 0.241492 Jy
! Component: 150  -  total flux cleaned = 0.281513 Jy
! Component: 200  -  total flux cleaned = 0.305681 Jy
! Total flux subtracted in 200 components = 0.305681 Jy
! Clean residual min=-0.008366 max=0.015263 Jy/beam
! Clean residual mean=-0.000162 rms=0.003236 Jy/beam
! Combined flux in latest and established models = 0.305681 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 67 model components to the UV plane model.
! The established model now contains 67 components and 0.305681 Jy
! Inverting map and beam 
! Estimated beam: bmin=10.26 mas, bmaj=54.86 mas, bpa=-3.036 degrees
! Estimated noise=1.53398 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0173121 Jy
! Component: 100  -  total flux cleaned = 0.0270518 Jy
! Component: 150  -  total flux cleaned = 0.0331112 Jy
! Component: 200  -  total flux cleaned = 0.0371 Jy
! Total flux subtracted in 200 components = 0.0371 Jy
! Clean residual min=-0.004115 max=0.006618 Jy/beam
! Clean residual mean=0.000009 rms=0.001362 Jy/beam
! Combined flux in latest and established models = 0.342781 Jy
! Adding 101 model components to the UV plane model.
! The established model now contains 167 components and 0.342781 Jy
! Inverting map 
! Added new window around map position (-13.5, -12).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00534977 Jy
! Component: 100  -  total flux cleaned = 0.00623634 Jy
! Component: 150  -  total flux cleaned = 0.00615466 Jy
! Component: 200  -  total flux cleaned = 0.0059451 Jy
! Total flux subtracted in 200 components = 0.0059451 Jy
! Clean residual min=-0.002688 max=0.004289 Jy/beam
! Clean residual mean=0.000035 rms=0.000984 Jy/beam
! Combined flux in latest and established models = 0.348726 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 215 components and 0.348726 Jy
! Inverting map 
! Added new window around map position (13.5, 10.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00255299 Jy
! Component: 100  -  total flux cleaned = 0.00217122 Jy
! Component: 150  -  total flux cleaned = 0.00191293 Jy
! Component: 200  -  total flux cleaned = 0.00162537 Jy
! Total flux subtracted in 200 components = 0.00162537 Jy
! Clean residual min=-0.002050 max=0.003029 Jy/beam
! Clean residual mean=0.000044 rms=0.000791 Jy/beam
! Combined flux in latest and established models = 0.350351 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 264 components and 0.350351 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.49 mas, bmaj=58.12 mas, bpa=-2.374 degrees
! Estimated noise=1.52597 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00107264 Jy
! Component: 100  -  total flux cleaned = -0.00137786 Jy
! Component: 150  -  total flux cleaned = -0.00156695 Jy
! Component: 200  -  total flux cleaned = -0.00171536 Jy
! Total flux subtracted in 200 components = -0.00171536 Jy
! Clean residual min=-0.001811 max=0.002883 Jy/beam
! Clean residual mean=0.000043 rms=0.000753 Jy/beam
! Combined flux in latest and established models = 0.348636 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000138938 Jy
! Component: 100  -  total flux cleaned = -0.000245119 Jy
! Component: 150  -  total flux cleaned = -0.000370641 Jy
! Component: 200  -  total flux cleaned = -0.000442679 Jy
! Total flux subtracted in 200 components = -0.000442679 Jy
! Clean residual min=-0.001792 max=0.002823 Jy/beam
! Clean residual mean=0.000041 rms=0.000741 Jy/beam
! Combined flux in latest and established models = 0.348193 Jy
! Adding 92 model components to the UV plane model.
! The established model now contains 341 components and 0.348193 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=10.26 mas, bmaj=54.86 mas, bpa=-3.036 degrees
! Estimated noise=1.53398 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.83532e-05 Jy
! Component: 100  -  total flux cleaned = -3.60612e-05 Jy
! Component: 150  -  total flux cleaned = 3.00457e-05 Jy
! Component: 200  -  total flux cleaned = 2.92599e-05 Jy
! Total flux subtracted in 200 components = 2.92599e-05 Jy
! Clean residual min=-0.001860 max=0.002822 Jy/beam
! Clean residual mean=0.000037 rms=0.000723 Jy/beam
! Combined flux in latest and established models = 0.348223 Jy
selfcal
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 387 components and 0.348223 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083727Jy  sigma=0.464133
! Fit after  self-cal, rms=0.083662Jy  sigma=0.463948
wmodel J0719-3928_S_a_map.mod
! Writing 387 model components to file: J0719-3928_S_a_map.mod
wobs   J0719-3928_S_a_uvs.fits
! Writing UV FITS file: J0719-3928_S_a_uvs.fits
wwins  J0719-3928_S_a_map.win
! wwins: Wrote 3 windows to J0719-3928_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00126642 Jy
! Component: 100  -  total flux cleaned = 0.00206706 Jy
! Component: 150  -  total flux cleaned = 0.00247182 Jy
! Component: 200  -  total flux cleaned = 0.00257324 Jy
! Component: 250  -  total flux cleaned = 0.00276491 Jy
! Component: 300  -  total flux cleaned = 0.00291606 Jy
! Component: 350  -  total flux cleaned = 0.00294457 Jy
! Component: 400  -  total flux cleaned = 0.00291775 Jy
! Component: 450  -  total flux cleaned = 0.00281268 Jy
! Component: 500  -  total flux cleaned = 0.00271178 Jy
! Component: 550  -  total flux cleaned = 0.00268751 Jy
! Component: 600  -  total flux cleaned = 0.00278135 Jy
! Component: 650  -  total flux cleaned = 0.00287301 Jy
! Component: 700  -  total flux cleaned = 0.00300542 Jy
! Component: 750  -  total flux cleaned = 0.00307 Jy
! Component: 800  -  total flux cleaned = 0.00317483 Jy
! Component: 850  -  total flux cleaned = 0.00329641 Jy
! Component: 900  -  total flux cleaned = 0.00337502 Jy
! Component: 950  -  total flux cleaned = 0.00348985 Jy
! Component: 1000  -  total flux cleaned = 0.00354592 Jy
! Component: 1050  -  total flux cleaned = 0.00367389 Jy
! Component: 1100  -  total flux cleaned = 0.00376276 Jy
! Component: 1150  -  total flux cleaned = 0.00391994 Jy
! Component: 1200  -  total flux cleaned = 0.00400564 Jy
! Component: 1250  -  total flux cleaned = 0.00413988 Jy
! Component: 1300  -  total flux cleaned = 0.00425545 Jy
! Component: 1350  -  total flux cleaned = 0.00440073 Jy
! Component: 1400  -  total flux cleaned = 0.00447996 Jy
! Component: 1450  -  total flux cleaned = 0.00462038 Jy
! Component: 1500  -  total flux cleaned = 0.00468156 Jy
! Component: 1550  -  total flux cleaned = 0.00483245 Jy
! Component: 1600  -  total flux cleaned = 0.00492149 Jy
! Component: 1650  -  total flux cleaned = 0.00505292 Jy
! Component: 1700  -  total flux cleaned = 0.00512483 Jy
! Component: 1750  -  total flux cleaned = 0.00520985 Jy
! Component: 1800  -  total flux cleaned = 0.00523779 Jy
! Component: 1850  -  total flux cleaned = 0.00532021 Jy
! Component: 1900  -  total flux cleaned = 0.00536072 Jy
! Component: 1950  -  total flux cleaned = 0.00541421 Jy
! Component: 2000  -  total flux cleaned = 0.00545387 Jy
! Component: 2050  -  total flux cleaned = 0.00551911 Jy
! Component: 2100  -  total flux cleaned = 0.00557075 Jy
! Component: 2150  -  total flux cleaned = 0.00563446 Jy
! Component: 2200  -  total flux cleaned = 0.00568496 Jy
! Component: 2250  -  total flux cleaned = 0.00572243 Jy
! Component: 2300  -  total flux cleaned = 0.00574731 Jy
! Component: 2350  -  total flux cleaned = 0.00580844 Jy
! Component: 2400  -  total flux cleaned = 0.00583261 Jy
! Component: 2450  -  total flux cleaned = 0.0058326 Jy
! Component: 2500  -  total flux cleaned = 0.00586828 Jy
! Component: 2550  -  total flux cleaned = 0.00590351 Jy
! Component: 2600  -  total flux cleaned = 0.00588011 Jy
! Component: 2650  -  total flux cleaned = 0.00593815 Jy
! Component: 2700  -  total flux cleaned = 0.00591505 Jy
! Component: 2750  -  total flux cleaned = 0.00594939 Jy
! Component: 2800  -  total flux cleaned = 0.00596068 Jy
! Component: 2850  -  total flux cleaned = 0.00593809 Jy
! Component: 2900  -  total flux cleaned = 0.00593808 Jy
! Component: 2950  -  total flux cleaned = 0.00592694 Jy
! Component: 3000  -  total flux cleaned = 0.00591584 Jy
! Component: 3050  -  total flux cleaned = 0.00592679 Jy
! Component: 3100  -  total flux cleaned = 0.0059158 Jy
! Component: 3150  -  total flux cleaned = 0.00592675 Jy
! Component: 3200  -  total flux cleaned = 0.00591592 Jy
! Component: 3250  -  total flux cleaned = 0.0059159 Jy
! Component: 3300  -  total flux cleaned = 0.00592665 Jy
! Component: 3350  -  total flux cleaned = 0.00591601 Jy
! Component: 3400  -  total flux cleaned = 0.00591596 Jy
! Component: 3450  -  total flux cleaned = 0.00591597 Jy
! Component: 3500  -  total flux cleaned = 0.0059371 Jy
! Component: 3550  -  total flux cleaned = 0.00591593 Jy
! Component: 3600  -  total flux cleaned = 0.00589482 Jy
! Component: 3650  -  total flux cleaned = 0.00585266 Jy
! Component: 3700  -  total flux cleaned = 0.00583163 Jy
! Component: 3750  -  total flux cleaned = 0.0058212 Jy
! Component: 3800  -  total flux cleaned = 0.00580026 Jy
! Component: 3850  -  total flux cleaned = 0.00575843 Jy
! Component: 3900  -  total flux cleaned = 0.00572708 Jy
! Component: 3950  -  total flux cleaned = 0.0057062 Jy
! Component: 4000  -  total flux cleaned = 0.00568535 Jy
! Component: 4050  -  total flux cleaned = 0.00564371 Jy
! Total flux subtracted in 4096 components = 0.00560207 Jy
! Clean residual min=-0.000659 max=0.000686 Jy/beam
! Clean residual mean=-0.000004 rms=0.000243 Jy/beam
! Combined flux in latest and established models = 0.353825 Jy
keep
! Adding 526 model components to the UV plane model.
! The established model now contains 913 components and 0.353825 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uvm//J0719-3928_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 10.26 x 54.86 at -3.036 degrees (North through East)
! Clean map  min=-0.0027149  max=0.21857 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uvm//J0719-3928_S_a_map.fits
wmodel /image_prod/ug002_uvm//J0719-3928_S_a_map.mod
! Writing 913 model components to file: /image_prod/ug002_uvm//J0719-3928_S_a_map.mod
wobs   /image_prod/ug002_uvm//J0719-3928_S_a_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uvm//J0719-3928_S_a_uvs.fits
wwins  /image_prod/ug002_uvm//J0719-3928_S_a_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uvm//J0719-3928_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.218569 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000253563 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.348031 0.348031 0.696063 1.39213 2.78425 5.5685 11.137 22.274 44.548 89.096
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.218 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  861.991 
quit
! Quitting program
! Log file /image_prod/ug002_uvm//J0719-3928_S_a_dfm.log closed on Wed Mar  4 16:47:28 2020