! Started logfile: /image_prod/ug002_uvm//J0718+6651_X_a_dfm.log on Wed Mar  4 16:47:14 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uvm//J0718+6651_X_a_uvm.fits
! Reading UV FITS file: /image_prod/ug002_uvm//J0718+6651_X_a_uvm.fits
! AN table 1: 120 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.954259 visibilities/baseline/integration-bin.
! Found source: J0718+6651
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 61836 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0718+6651_X_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004375Jy  sigma=9.193417
! Fit after  self-cal, rms=0.929795Jy  sigma=8.496041
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.792 mas, bmaj=0.9086 mas, bpa=25.26 degrees
! Estimated noise=0.697566 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0511924 Jy
! Component: 100  -  total flux cleaned = 0.0679528 Jy
! Total flux subtracted in 100 components = 0.0679528 Jy
! Clean residual min=-0.002387 max=0.007635 Jy/beam
! Clean residual mean=-0.000002 rms=0.000564 Jy/beam
! Combined flux in latest and established models = 0.0679528 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0679528 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063955Jy  sigma=0.504540
! Fit after  self-cal, rms=0.063345Jy  sigma=0.499208
! Inverting map 
! Added new window around map position (-0.8, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00955305 Jy
! Component: 100  -  total flux cleaned = 0.0145745 Jy
! Total flux subtracted in 100 components = 0.0145745 Jy
! Clean residual min=-0.001989 max=0.002998 Jy/beam
! Clean residual mean=-0.000001 rms=0.000448 Jy/beam
! Combined flux in latest and established models = 0.0825274 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 8 components and 0.0825273 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061633Jy  sigma=0.479140
! Fit after  self-cal, rms=0.061586Jy  sigma=0.478752
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00330702 Jy
! Component: 100  -  total flux cleaned = 0.00517698 Jy
! Total flux subtracted in 100 components = 0.00517698 Jy
! Clean residual min=-0.001872 max=0.002613 Jy/beam
! Clean residual mean=-0.000001 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.0877043 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 11 components and 0.0877043 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061383Jy  sigma=0.476387
! Fit after  self-cal, rms=0.061374Jy  sigma=0.476308
! Inverting map 
! Added new window around map position (-2.4, 2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00231845 Jy
! Component: 100  -  total flux cleaned = 0.00373032 Jy
! Total flux subtracted in 100 components = 0.00373032 Jy
! Clean residual min=-0.001822 max=0.002224 Jy/beam
! Clean residual mean=-0.000000 rms=0.000420 Jy/beam
! Combined flux in latest and established models = 0.0914347 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 15 components and 0.0914346 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061258Jy  sigma=0.474966
! Fit after  self-cal, rms=0.061246Jy  sigma=0.474886
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.049 mas, bmaj=1.203 mas, bpa=31.36 degrees
! Estimated noise=0.319313 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00193612 Jy
! Component: 100  -  total flux cleaned = 0.00306277 Jy
! Component: 150  -  total flux cleaned = 0.00378432 Jy
! Component: 200  -  total flux cleaned = 0.00415272 Jy
! Total flux subtracted in 200 components = 0.00415272 Jy
! Clean residual min=-0.001178 max=0.001505 Jy/beam
! Clean residual mean=-0.000001 rms=0.000291 Jy/beam
! Combined flux in latest and established models = 0.0955874 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 27 components and 0.0955874 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061182Jy  sigma=0.474207
! Fit after  self-cal, rms=0.061170Jy  sigma=0.474108
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.049 x 1.203 at 31.36 degrees (North through East)
! Clean map  min=-0.0011301  max=0.070585 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        1.02     KP        1.05     
!   LA        1.00     MK        1.07     NL        1.05     OV        0.96     
!   PT        0.93     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.03     HN        0.99     KP        1.02     
!   LA        1.03     MK        1.05     NL        1.07     OV        0.94     
!   PT        0.91     SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.96     KP        1.01     
!   LA        1.02     MK        1.08     NL        1.09     OV        0.95     
!   PT        0.92     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        1.03     KP        1.00     
!   LA        0.99     MK        1.00     NL        1.09     OV        0.95     
!   PT        0.92     SC        0.96     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.02     HN        1.00     KP        1.04     
!   LA        1.02     MK        1.02     NL        1.09     OV        0.93     
!   PT        0.94     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        1.00     KP        1.01     
!   LA        1.02     MK        1.03     NL        1.09     OV        0.95     
!   PT        0.93     SC        0.94     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.04     KP        1.03     
!   LA        1.03     MK        1.04     NL        1.05     OV        0.95     
!   PT        0.91     SC        0.96     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.01     HN        0.96     KP        1.01     
!   LA        1.01     MK        1.07     NL        1.04     OV        0.95     
!   PT        0.95     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.01     KP        1.01     
!   LA        1.02     MK        1.05     NL        1.09     OV        0.96     
!   PT        0.93     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        0.99     KP        1.02     
!   LA        1.02     MK        1.04     NL        1.08     OV        0.97     
!   PT        0.93     SC        0.95     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        1.03     KP        1.04     
!   LA        1.01     MK        1.00     NL        1.04     OV        0.95     
!   PT        0.93     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.95     KP        1.03     
!   LA        1.02     MK        1.03     NL        1.06     OV        0.99     
!   PT        0.94     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.061170Jy  sigma=0.474108
! Fit after  self-cal, rms=0.060575Jy  sigma=0.472390
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.05 mas, bmaj=1.21 mas, bpa=31.75 degrees
! Estimated noise=0.319076 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000348155 Jy
! Component: 100  -  total flux cleaned = -0.000444502 Jy
! Component: 150  -  total flux cleaned = -0.000443634 Jy
! Component: 200  -  total flux cleaned = -0.000443746 Jy
! Total flux subtracted in 200 components = -0.000443746 Jy
! Clean residual min=-0.001106 max=0.001250 Jy/beam
! Clean residual mean=-0.000001 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.0951436 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 31 components and 0.0951436 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060562Jy  sigma=0.472305
! Fit after  self-cal, rms=0.060551Jy  sigma=0.472251
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060551Jy  sigma=0.472251
! Fit after  self-cal, rms=0.061419Jy  sigma=0.466390
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.046 mas, bmaj=1.203 mas, bpa=30.96 degrees
! Estimated noise=0.318084 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.07138e-06 Jy
! Component: 100  -  total flux cleaned = 1.80816e-05 Jy
! Component: 150  -  total flux cleaned = 6.15067e-05 Jy
! Component: 200  -  total flux cleaned = 8.75688e-05 Jy
! Total flux subtracted in 200 components = 8.75688e-05 Jy
! Clean residual min=-0.000728 max=0.000601 Jy/beam
! Clean residual mean=0.000001 rms=0.000149 Jy/beam
! Combined flux in latest and established models = 0.0952312 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 38 components and 0.0952312 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061411Jy  sigma=0.466322
! Fit after  self-cal, rms=0.061463Jy  sigma=0.466210
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.89894e-05 Jy
! Component: 100  -  total flux cleaned = -4.72307e-05 Jy
! Component: 150  -  total flux cleaned = -2.57426e-05 Jy
! Component: 200  -  total flux cleaned = -6.48229e-06 Jy
! Total flux subtracted in 200 components = -6.48229e-06 Jy
! Clean residual min=-0.000709 max=0.000610 Jy/beam
! Clean residual mean=0.000001 rms=0.000149 Jy/beam
! Combined flux in latest and established models = 0.0952247 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 38 components and 0.0952247 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061459Jy  sigma=0.466176
! Fit after  self-cal, rms=0.061458Jy  sigma=0.466172
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061458Jy  sigma=0.466172
! Fit after  self-cal, rms=0.061712Jy  sigma=0.466160
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.044 mas, bmaj=1.203 mas, bpa=31.32 degrees
! Estimated noise=0.318001 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.8764e-05 Jy
! Component: 100  -  total flux cleaned = 2.94821e-05 Jy
! Component: 150  -  total flux cleaned = 5.88818e-05 Jy
! Component: 200  -  total flux cleaned = 7.62085e-05 Jy
! Total flux subtracted in 200 components = 7.62085e-05 Jy
! Clean residual min=-0.000709 max=0.000615 Jy/beam
! Clean residual mean=0.000001 rms=0.000148 Jy/beam
! Combined flux in latest and established models = 0.0953009 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 38 components and 0.0953009 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061708Jy  sigma=0.466128
! Fit after  self-cal, rms=0.061711Jy  sigma=0.466124
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.96213e-05 Jy
! Component: 100  -  total flux cleaned = -2.29362e-05 Jy
! Component: 150  -  total flux cleaned = -1.52943e-05 Jy
! Component: 200  -  total flux cleaned = -1.08294e-06 Jy
! Total flux subtracted in 200 components = -1.08294e-06 Jy
! Clean residual min=-0.000701 max=0.000622 Jy/beam
! Clean residual mean=0.000001 rms=0.000147 Jy/beam
! Combined flux in latest and established models = 0.0952999 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 39 components and 0.0952998 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061709Jy  sigma=0.466105
! Fit after  self-cal, rms=0.061708Jy  sigma=0.466103
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061708Jy  sigma=0.466103
! Fit after  self-cal, rms=0.061772Jy  sigma=0.466098
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.322 mas, bmaj=2.564 mas, bpa=53.25 degrees
! Estimated noise=0.39415 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000164785 Jy
! Component: 100  -  total flux cleaned = 0.000186795 Jy
! Component: 150  -  total flux cleaned = 0.00020328 Jy
! Component: 200  -  total flux cleaned = 0.000215907 Jy
! Total flux subtracted in 200 components = 0.000215907 Jy
! Clean residual min=-0.000761 max=0.000620 Jy/beam
! Clean residual mean=0.000002 rms=0.000168 Jy/beam
! Combined flux in latest and established models = 0.0955158 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 46 components and 0.0955157 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061772Jy  sigma=0.466089
! Fit after  self-cal, rms=0.061771Jy  sigma=0.466086
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.69036e-05 Jy
! Component: 100  -  total flux cleaned = 2.64825e-05 Jy
! Component: 150  -  total flux cleaned = 2.63218e-05 Jy
! Component: 200  -  total flux cleaned = 2.84748e-05 Jy
! Total flux subtracted in 200 components = 2.84748e-05 Jy
! Clean residual min=-0.000761 max=0.000615 Jy/beam
! Clean residual mean=0.000002 rms=0.000167 Jy/beam
! Combined flux in latest and established models = 0.0955442 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 48 components and 0.0955442 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061771Jy  sigma=0.466082
! Fit after  self-cal, rms=0.061770Jy  sigma=0.466083
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.042 mas, bmaj=1.204 mas, bpa=31.69 degrees
! Estimated noise=0.317966 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.042 x 1.204 at 31.69 degrees (North through East)
! Clean map  min=-0.00064971  max=0.070338 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7849 mas, bmaj=0.9094 mas, bpa=26.76 degrees
! Estimated noise=0.688325 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0508771 Jy
! Component: 100  -  total flux cleaned = 0.0692369 Jy
! Component: 150  -  total flux cleaned = 0.078242 Jy
! Component: 200  -  total flux cleaned = 0.0829527 Jy
! Total flux subtracted in 200 components = 0.0829527 Jy
! Clean residual min=-0.001473 max=0.002272 Jy/beam
! Clean residual mean=-0.000001 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.0829527 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0829527 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.042 mas, bmaj=1.204 mas, bpa=31.69 degrees
! Estimated noise=0.317966 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00427138 Jy
! Component: 100  -  total flux cleaned = 0.0068639 Jy
! Component: 150  -  total flux cleaned = 0.00860365 Jy
! Component: 200  -  total flux cleaned = 0.00980856 Jy
! Total flux subtracted in 200 components = 0.00980856 Jy
! Clean residual min=-0.000781 max=0.000833 Jy/beam
! Clean residual mean=0.000000 rms=0.000159 Jy/beam
! Combined flux in latest and established models = 0.0927613 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 36 components and 0.0927613 Jy
! Inverting map 
! Added new window around map position (-1.2, 2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000908428 Jy
! Component: 100  -  total flux cleaned = 0.00154526 Jy
! Component: 150  -  total flux cleaned = 0.00200555 Jy
! Component: 200  -  total flux cleaned = 0.0023202 Jy
! Total flux subtracted in 200 components = 0.0023202 Jy
! Clean residual min=-0.000710 max=0.000620 Jy/beam
! Clean residual mean=0.000001 rms=0.000147 Jy/beam
! Combined flux in latest and established models = 0.0950815 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 45 components and 0.0950815 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.322 mas, bmaj=2.564 mas, bpa=53.25 degrees
! Estimated noise=0.39415 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00030814 Jy
! Component: 100  -  total flux cleaned = 0.000373817 Jy
! Component: 150  -  total flux cleaned = 0.000401552 Jy
! Component: 200  -  total flux cleaned = 0.000414136 Jy
! Total flux subtracted in 200 components = 0.000414136 Jy
! Clean residual min=-0.000773 max=0.000632 Jy/beam
! Clean residual mean=0.000002 rms=0.000167 Jy/beam
! Combined flux in latest and established models = 0.0954956 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.99566e-06 Jy
! Component: 100  -  total flux cleaned = 1.31122e-05 Jy
! Component: 150  -  total flux cleaned = 1.03775e-05 Jy
! Component: 200  -  total flux cleaned = 7.84051e-06 Jy
! Total flux subtracted in 200 components = 7.84051e-06 Jy
! Clean residual min=-0.000772 max=0.000625 Jy/beam
! Clean residual mean=0.000002 rms=0.000167 Jy/beam
! Combined flux in latest and established models = 0.0955034 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 61 components and 0.0955035 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.042 mas, bmaj=1.204 mas, bpa=31.69 degrees
! Estimated noise=0.317966 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.14307e-05 Jy
! Component: 100  -  total flux cleaned = 2.53228e-05 Jy
! Component: 150  -  total flux cleaned = -6.48569e-06 Jy
! Component: 200  -  total flux cleaned = -2.83394e-05 Jy
! Total flux subtracted in 200 components = -2.83394e-05 Jy
! Clean residual min=-0.000693 max=0.000631 Jy/beam
! Clean residual mean=0.000001 rms=0.000146 Jy/beam
! Combined flux in latest and established models = 0.0954751 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 69 components and 0.0954751 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061762Jy  sigma=0.466033
! Fit after  self-cal, rms=0.061758Jy  sigma=0.466020
wmodel J0718+6651_X_a_map.mod
! Writing 69 model components to file: J0718+6651_X_a_map.mod
wobs   J0718+6651_X_a_uvs.fits
! Writing UV FITS file: J0718+6651_X_a_uvs.fits
wwins  J0718+6651_X_a_map.win
! wwins: Wrote 4 windows to J0718+6651_X_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000187442 Jy
! Component: 100  -  total flux cleaned = -0.000288451 Jy
! Component: 150  -  total flux cleaned = -0.000320303 Jy
! Component: 200  -  total flux cleaned = -0.000372185 Jy
! Component: 250  -  total flux cleaned = -0.000412671 Jy
! Component: 300  -  total flux cleaned = -0.000442237 Jy
! Component: 350  -  total flux cleaned = -0.000461592 Jy
! Component: 400  -  total flux cleaned = -0.000461554 Jy
! Component: 450  -  total flux cleaned = -0.00048048 Jy
! Component: 500  -  total flux cleaned = -0.000499041 Jy
! Component: 550  -  total flux cleaned = -0.000498938 Jy
! Component: 600  -  total flux cleaned = -0.000489701 Jy
! Component: 650  -  total flux cleaned = -0.00048988 Jy
! Component: 700  -  total flux cleaned = -0.000471949 Jy
! Component: 750  -  total flux cleaned = -0.000489714 Jy
! Component: 800  -  total flux cleaned = -0.000445513 Jy
! Component: 850  -  total flux cleaned = -0.000436779 Jy
! Component: 900  -  total flux cleaned = -0.000428093 Jy
! Component: 950  -  total flux cleaned = -0.000410906 Jy
! Component: 1000  -  total flux cleaned = -0.000393791 Jy
! Component: 1050  -  total flux cleaned = -0.000393841 Jy
! Component: 1100  -  total flux cleaned = -0.000393812 Jy
! Component: 1150  -  total flux cleaned = -0.000377139 Jy
! Component: 1200  -  total flux cleaned = -0.000360357 Jy
! Component: 1250  -  total flux cleaned = -0.000352011 Jy
! Component: 1300  -  total flux cleaned = -0.000277936 Jy
! Component: 1350  -  total flux cleaned = -0.000302556 Jy
! Component: 1400  -  total flux cleaned = -0.000270123 Jy
! Component: 1450  -  total flux cleaned = -0.000245873 Jy
! Component: 1500  -  total flux cleaned = -0.000229764 Jy
! Component: 1550  -  total flux cleaned = -0.000189716 Jy
! Component: 1600  -  total flux cleaned = -0.0001659 Jy
! Component: 1650  -  total flux cleaned = -0.000102516 Jy
! Component: 1700  -  total flux cleaned = -0.000134118 Jy
! Component: 1750  -  total flux cleaned = -7.13887e-05 Jy
! Component: 1800  -  total flux cleaned = -5.5793e-05 Jy
! Component: 1850  -  total flux cleaned = -4.02608e-05 Jy
! Component: 1900  -  total flux cleaned = -5.56909e-05 Jy
! Component: 1950  -  total flux cleaned = -7.11238e-05 Jy
! Component: 2000  -  total flux cleaned = -4.81231e-05 Jy
! Component: 2050  -  total flux cleaned = -1.75524e-05 Jy
! Component: 2100  -  total flux cleaned = -4.79836e-05 Jy
! Component: 2150  -  total flux cleaned = 2.77757e-05 Jy
! Component: 2200  -  total flux cleaned = 1.27318e-05 Jy
! Component: 2250  -  total flux cleaned = 5.02454e-05 Jy
! Component: 2300  -  total flux cleaned = 5.02043e-05 Jy
! Component: 2350  -  total flux cleaned = 4.27913e-05 Jy
! Component: 2400  -  total flux cleaned = 0.000102132 Jy
! Component: 2450  -  total flux cleaned = 9.47274e-05 Jy
! Component: 2500  -  total flux cleaned = 0.000109438 Jy
! Component: 2550  -  total flux cleaned = 0.000102137 Jy
! Component: 2600  -  total flux cleaned = 0.000153342 Jy
! Component: 2650  -  total flux cleaned = 0.000175188 Jy
! Component: 2700  -  total flux cleaned = 0.000167937 Jy
! Component: 2750  -  total flux cleaned = 0.000182413 Jy
! Component: 2800  -  total flux cleaned = 0.000218476 Jy
! Component: 2850  -  total flux cleaned = 0.000211286 Jy
! Component: 2900  -  total flux cleaned = 0.000247052 Jy
! Component: 2950  -  total flux cleaned = 0.000247032 Jy
! Component: 3000  -  total flux cleaned = 0.000261233 Jy
! Component: 3050  -  total flux cleaned = 0.000275391 Jy
! Component: 3100  -  total flux cleaned = 0.000261285 Jy
! Component: 3150  -  total flux cleaned = 0.000254221 Jy
! Component: 3200  -  total flux cleaned = 0.000268271 Jy
! Component: 3250  -  total flux cleaned = 0.000282282 Jy
! Component: 3300  -  total flux cleaned = 0.000282294 Jy
! Component: 3350  -  total flux cleaned = 0.000296198 Jy
! Component: 3400  -  total flux cleaned = 0.000275446 Jy
! Component: 3450  -  total flux cleaned = 0.000303086 Jy
! Component: 3500  -  total flux cleaned = 0.000344428 Jy
! Component: 3550  -  total flux cleaned = 0.000344423 Jy
! Component: 3600  -  total flux cleaned = 0.000344441 Jy
! Component: 3650  -  total flux cleaned = 0.000385336 Jy
! Component: 3700  -  total flux cleaned = 0.000378568 Jy
! Component: 3750  -  total flux cleaned = 0.000385343 Jy
! Component: 3800  -  total flux cleaned = 0.000392129 Jy
! Component: 3850  -  total flux cleaned = 0.00040563 Jy
! Component: 3900  -  total flux cleaned = 0.000432523 Jy
! Component: 3950  -  total flux cleaned = 0.000439243 Jy
! Component: 4000  -  total flux cleaned = 0.00039245 Jy
! Component: 4050  -  total flux cleaned = 0.00043243 Jy
! Total flux subtracted in 4096 components = 0.000445737 Jy
! Clean residual min=-0.000386 max=0.000365 Jy/beam
! Clean residual mean=0.000001 rms=0.000116 Jy/beam
! Combined flux in latest and established models = 0.0959209 Jy
keep
! Adding 362 model components to the UV plane model.
! The established model now contains 431 components and 0.0959209 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uvm//J0718+6651_X_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.042 x 1.204 at 31.69 degrees (North through East)
! Clean map  min=-0.00056974  max=0.070321 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uvm//J0718+6651_X_a_map.fits
wmodel /image_prod/ug002_uvm//J0718+6651_X_a_map.mod
! Writing 431 model components to file: /image_prod/ug002_uvm//J0718+6651_X_a_map.mod
wobs   /image_prod/ug002_uvm//J0718+6651_X_a_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uvm//J0718+6651_X_a_uvs.fits
wwins  /image_prod/ug002_uvm//J0718+6651_X_a_map.win
! wwins: Wrote 5 windows to /image_prod/ug002_uvm//J0718+6651_X_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0703214 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000115818 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.494094 0.494094 0.988188 1.97638 3.95275 7.90551 15.811 31.622 63.2441
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.07 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  607.171 
quit
! Quitting program
! Log file /image_prod/ug002_uvm//J0718+6651_X_a_dfm.log closed on Wed Mar  4 16:47:22 2020