! Started logfile: /image_prod/ug002_uvm//J0710+4732_S_b_dfm.log on Wed Mar  4 16:46:41 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uvm//J0710+4732_S_b_uvm.fits
! Reading UV FITS file: /image_prod/ug002_uvm//J0710+4732_S_b_uvm.fits
! AN table 1: 18 integrations on 45 of 45 possible baselines.
! AN table 2: 21 integrations on 36 of 36 possible baselines.
! AN table 3: 8 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.736448 visibilities/baseline/integration-bin.
! Found source: J0710+4732
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 3831 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0710+4732_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 42 telescope corrections were flagged in sub-array 1.
!  A total of 21 telescope corrections were flagged in sub-array 2.
!  A total of 2 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 42 telescope corrections were flagged in sub-array 1.
!  A total of 21 telescope corrections were flagged in sub-array 2.
!  A total of 2 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 42 telescope corrections were flagged in sub-array 1.
!  A total of 21 telescope corrections were flagged in sub-array 2.
!  A total of 2 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.095188Jy  sigma=8.725879
! Fit after  self-cal, rms=0.556630Jy  sigma=4.464034
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.295 mas, bmaj=4.48 mas, bpa=-2.996 degrees
! Estimated noise=1.91526 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.34449 Jy
! Component: 100  -  total flux cleaned = 0.442321 Jy
! Total flux subtracted in 100 components = 0.442321 Jy
! Clean residual min=-0.018785 max=0.042013 Jy/beam
! Clean residual mean=-0.000002 rms=0.004882 Jy/beam
! Combined flux in latest and established models = 0.442321 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.442321 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.140657Jy  sigma=1.064331
! Fit after  self-cal, rms=0.140255Jy  sigma=1.060248
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0463646 Jy
! Component: 100  -  total flux cleaned = 0.0722635 Jy
! Total flux subtracted in 100 components = 0.0722635 Jy
! Clean residual min=-0.013291 max=0.029312 Jy/beam
! Clean residual mean=-0.000009 rms=0.003825 Jy/beam
! Combined flux in latest and established models = 0.514585 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 13 components and 0.514584 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.119187Jy  sigma=0.902700
! Fit after  self-cal, rms=0.118874Jy  sigma=0.900050
! Inverting map 
! Added new window around map position (3, 6.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.026263 Jy
! Component: 100  -  total flux cleaned = 0.0411288 Jy
! Total flux subtracted in 100 components = 0.0411288 Jy
! Clean residual min=-0.012978 max=0.017533 Jy/beam
! Clean residual mean=-0.000020 rms=0.003419 Jy/beam
! Combined flux in latest and established models = 0.555713 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 23 components and 0.555713 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.111750Jy  sigma=0.834930
! Fit after  self-cal, rms=0.110821Jy  sigma=0.828629
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.897 mas, bmaj=5.254 mas, bpa=-9.132 degrees
! Estimated noise=1.50923 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.017197 Jy
! Component: 100  -  total flux cleaned = 0.0243687 Jy
! Component: 150  -  total flux cleaned = 0.0261462 Jy
! Component: 200  -  total flux cleaned = 0.0276341 Jy
! Total flux subtracted in 200 components = 0.0276341 Jy
! Clean residual min=-0.013725 max=0.014855 Jy/beam
! Clean residual mean=-0.000035 rms=0.003324 Jy/beam
! Combined flux in latest and established models = 0.583347 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 36 components and 0.583347 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.108171Jy  sigma=0.801344
! Fit after  self-cal, rms=0.107823Jy  sigma=0.798631
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.897 x 5.254 at -9.132 degrees (North through East)
! Clean map  min=-0.014391  max=0.4444 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.97     HN        0.99     KP        0.99     
!   LA        1.06     MK        0.97     NL        1.30     OV        0.92     
!   PT        1.00     SC        1.02     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.95     FD        0.99     HN        0.94     KP        1.00     
!   LA        0.99     MK        0.98     OV        0.96     PT        1.00     
!   SC        1.03     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.95     LA        1.00     MK        0.99     NL        1.03     
!   OV        0.99     PT        1.05     SC        1.00     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.98     HN        0.99     KP        1.06     
!   LA        1.04     MK        0.98     NL        1.21     OV        0.92     
!   PT        1.03     SC        0.87     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.94     FD        0.97     HN        0.95     KP        0.96     
!   LA        0.98     MK        0.98     OV        0.96     PT        1.00     
!   SC        1.25     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.97     LA        1.03     MK        0.99     NL        0.80     
!   OV        0.98     PT        1.05     SC        1.41     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.97     HN        0.99     KP        1.04     
!   LA        1.07     MK        1.00     NL        1.30     OV        0.92     
!   PT        1.02     SC        1.04     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.93     FD        0.98     HN        0.94     KP        0.97     
!   LA        0.96     MK        1.01     OV        0.96     PT        0.99     
!   SC        1.06     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.97     LA        1.02     MK        0.99     NL        0.97     
!   OV        0.95     PT        1.04     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.107823Jy  sigma=0.798631
! Fit after  self-cal, rms=0.110607Jy  sigma=0.704974
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.903 mas, bmaj=5.25 mas, bpa=-9.874 degrees
! Estimated noise=1.50635 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00362548 Jy
! Component: 100  -  total flux cleaned = 0.00459493 Jy
! Component: 150  -  total flux cleaned = 0.00489125 Jy
! Component: 200  -  total flux cleaned = 0.00513825 Jy
! Total flux subtracted in 200 components = 0.00513825 Jy
! Clean residual min=-0.009400 max=0.010897 Jy/beam
! Clean residual mean=-0.000044 rms=0.002641 Jy/beam
! Combined flux in latest and established models = 0.588485 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 42 components and 0.588485 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.110281Jy  sigma=0.703067
! Fit after  self-cal, rms=0.110291Jy  sigma=0.702603
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.110291Jy  sigma=0.702603
! Fit after  self-cal, rms=0.115162Jy  sigma=0.508219
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.899 mas, bmaj=5.216 mas, bpa=-9.138 degrees
! Estimated noise=1.50772 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00103275 Jy
! Component: 100  -  total flux cleaned = -0.00189528 Jy
! Component: 150  -  total flux cleaned = -0.00200189 Jy
! Component: 200  -  total flux cleaned = -0.00217094 Jy
! Total flux subtracted in 200 components = -0.00217094 Jy
! Clean residual min=-0.003574 max=0.004178 Jy/beam
! Clean residual mean=-0.000018 rms=0.000854 Jy/beam
! Combined flux in latest and established models = 0.586314 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 52 components and 0.586314 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.114802Jy  sigma=0.504419
! Fit after  self-cal, rms=0.114838Jy  sigma=0.503675
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (17, 12).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00394284 Jy
! Component: 100  -  total flux cleaned = 0.00490224 Jy
! Component: 150  -  total flux cleaned = 0.00570969 Jy
! Component: 200  -  total flux cleaned = 0.00631063 Jy
! Total flux subtracted in 200 components = 0.00631063 Jy
! Clean residual min=-0.003074 max=0.003147 Jy/beam
! Clean residual mean=-0.000016 rms=0.000755 Jy/beam
! Combined flux in latest and established models = 0.592625 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 63 components and 0.592625 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.114585Jy  sigma=0.500607
! Fit after  self-cal, rms=0.114573Jy  sigma=0.500393
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.114573Jy  sigma=0.500393
! Fit after  self-cal, rms=0.116605Jy  sigma=0.499434
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.898 mas, bmaj=5.201 mas, bpa=-8.713 degrees
! Estimated noise=1.50763 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000157064 Jy
! Component: 100  -  total flux cleaned = 0.000513359 Jy
! Component: 150  -  total flux cleaned = 0.000985714 Jy
! Component: 200  -  total flux cleaned = 0.00140785 Jy
! Total flux subtracted in 200 components = 0.00140785 Jy
! Clean residual min=-0.002890 max=0.002821 Jy/beam
! Clean residual mean=-0.000014 rms=0.000703 Jy/beam
! Combined flux in latest and established models = 0.594033 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 68 components and 0.594033 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.116457Jy  sigma=0.497754
! Fit after  self-cal, rms=0.116452Jy  sigma=0.497639
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.7628e-05 Jy
! Component: 100  -  total flux cleaned = 0.000403833 Jy
! Component: 150  -  total flux cleaned = 0.000737172 Jy
! Component: 200  -  total flux cleaned = 0.00103501 Jy
! Total flux subtracted in 200 components = 0.00103501 Jy
! Clean residual min=-0.002838 max=0.002761 Jy/beam
! Clean residual mean=-0.000014 rms=0.000684 Jy/beam
! Combined flux in latest and established models = 0.595068 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 78 components and 0.595068 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.116378Jy  sigma=0.496904
! Fit after  self-cal, rms=0.116374Jy  sigma=0.496832
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.116374Jy  sigma=0.496832
! Fit after  self-cal, rms=0.117547Jy  sigma=0.496507
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.354 mas, bmaj=9.021 mas, bpa=-17.6 degrees
! Estimated noise=1.86123 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.87157e-05 Jy
! Component: 100  -  total flux cleaned = 0.000255033 Jy
! Component: 150  -  total flux cleaned = 0.000374124 Jy
! Component: 200  -  total flux cleaned = 0.000513183 Jy
! Total flux subtracted in 200 components = 0.000513183 Jy
! Clean residual min=-0.002732 max=0.002470 Jy/beam
! Clean residual mean=-0.000025 rms=0.000699 Jy/beam
! Combined flux in latest and established models = 0.595581 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 87 components and 0.595581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.117509Jy  sigma=0.495983
! Fit after  self-cal, rms=0.117505Jy  sigma=0.495926
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000137338 Jy
! Component: 100  -  total flux cleaned = 0.000333727 Jy
! Component: 150  -  total flux cleaned = 0.000418548 Jy
! Component: 200  -  total flux cleaned = 0.000523416 Jy
! Total flux subtracted in 200 components = 0.000523416 Jy
! Clean residual min=-0.002723 max=0.002396 Jy/beam
! Clean residual mean=-0.000025 rms=0.000695 Jy/beam
! Combined flux in latest and established models = 0.596105 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 90 components and 0.596105 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.117482Jy  sigma=0.495636
! Fit after  self-cal, rms=0.117480Jy  sigma=0.495607
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.897 mas, bmaj=5.191 mas, bpa=-8.45 degrees
! Estimated noise=1.50878 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.897 x 5.191 at -8.45 degrees (North through East)
! Clean map  min=-0.0025949  max=0.4443 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.293 mas, bmaj=4.449 mas, bpa=-2.349 degrees
! Estimated noise=1.90904 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.342373 Jy
! Component: 100  -  total flux cleaned = 0.444606 Jy
! Component: 150  -  total flux cleaned = 0.4941 Jy
! Component: 200  -  total flux cleaned = 0.522113 Jy
! Total flux subtracted in 200 components = 0.522113 Jy
! Clean residual min=-0.006165 max=0.014221 Jy/beam
! Clean residual mean=0.000007 rms=0.001664 Jy/beam
! Combined flux in latest and established models = 0.522113 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.522113 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.897 mas, bmaj=5.191 mas, bpa=-8.45 degrees
! Estimated noise=1.50878 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.023457 Jy
! Component: 100  -  total flux cleaned = 0.0373834 Jy
! Component: 150  -  total flux cleaned = 0.0461111 Jy
! Component: 200  -  total flux cleaned = 0.0523392 Jy
! Total flux subtracted in 200 components = 0.0523392 Jy
! Clean residual min=-0.003447 max=0.004511 Jy/beam
! Clean residual mean=-0.000010 rms=0.000905 Jy/beam
! Combined flux in latest and established models = 0.574452 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 60 components and 0.574453 Jy
! Inverting map 
! Added new window around map position (8, 11.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00513902 Jy
! Component: 100  -  total flux cleaned = 0.00910727 Jy
! Component: 150  -  total flux cleaned = 0.0122812 Jy
! Component: 200  -  total flux cleaned = 0.0148275 Jy
! Total flux subtracted in 200 components = 0.0148275 Jy
! Clean residual min=-0.002886 max=0.002592 Jy/beam
! Clean residual mean=-0.000012 rms=0.000693 Jy/beam
! Combined flux in latest and established models = 0.58928 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 82 components and 0.58928 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.354 mas, bmaj=9.021 mas, bpa=-17.6 degrees
! Estimated noise=1.86123 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00310628 Jy
! Component: 100  -  total flux cleaned = 0.00492772 Jy
! Component: 150  -  total flux cleaned = 0.00610666 Jy
! Component: 200  -  total flux cleaned = 0.00690781 Jy
! Total flux subtracted in 200 components = 0.00690781 Jy
! Clean residual min=-0.002785 max=0.002140 Jy/beam
! Clean residual mean=-0.000025 rms=0.000686 Jy/beam
! Combined flux in latest and established models = 0.596188 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000311373 Jy
! Component: 100  -  total flux cleaned = 0.000412628 Jy
! Component: 150  -  total flux cleaned = 0.000467472 Jy
! Component: 200  -  total flux cleaned = 0.000502066 Jy
! Total flux subtracted in 200 components = 0.000502066 Jy
! Clean residual min=-0.002765 max=0.002138 Jy/beam
! Clean residual mean=-0.000025 rms=0.000681 Jy/beam
! Combined flux in latest and established models = 0.59669 Jy
! Adding 66 model components to the UV plane model.
! The established model now contains 142 components and 0.59669 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.897 mas, bmaj=5.191 mas, bpa=-8.45 degrees
! Estimated noise=1.50878 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.03336e-06 Jy
! Component: 100  -  total flux cleaned = -9.41322e-05 Jy
! Component: 150  -  total flux cleaned = -0.00018454 Jy
! Component: 200  -  total flux cleaned = -0.000226383 Jy
! Total flux subtracted in 200 components = -0.000226383 Jy
! Clean residual min=-0.002627 max=0.002638 Jy/beam
! Clean residual mean=-0.000012 rms=0.000647 Jy/beam
! Combined flux in latest and established models = 0.596463 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 153 components and 0.596463 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.117403Jy  sigma=0.495276
! Fit after  self-cal, rms=0.117377Jy  sigma=0.494952
wmodel J0710+4732_S_b_map.mod
! Writing 153 model components to file: J0710+4732_S_b_map.mod
wobs   J0710+4732_S_b_uvs.fits
! Writing UV FITS file: J0710+4732_S_b_uvs.fits
wwins  J0710+4732_S_b_map.win
! wwins: Wrote 4 windows to J0710+4732_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000598467 Jy
! Component: 100  -  total flux cleaned = -0.00111347 Jy
! Component: 150  -  total flux cleaned = -0.00115961 Jy
! Component: 200  -  total flux cleaned = -0.00124615 Jy
! Component: 250  -  total flux cleaned = -0.00116325 Jy
! Component: 300  -  total flux cleaned = -0.00116322 Jy
! Component: 350  -  total flux cleaned = -0.0013219 Jy
! Component: 400  -  total flux cleaned = -0.00155589 Jy
! Component: 450  -  total flux cleaned = -0.00186247 Jy
! Component: 500  -  total flux cleaned = -0.00186176 Jy
! Component: 550  -  total flux cleaned = -0.00204814 Jy
! Component: 600  -  total flux cleaned = -0.00219588 Jy
! Component: 650  -  total flux cleaned = -0.00248628 Jy
! Component: 700  -  total flux cleaned = -0.0027367 Jy
! Component: 750  -  total flux cleaned = -0.00280699 Jy
! Component: 800  -  total flux cleaned = -0.00305199 Jy
! Component: 850  -  total flux cleaned = -0.00318994 Jy
! Component: 900  -  total flux cleaned = -0.00336082 Jy
! Component: 950  -  total flux cleaned = -0.00349575 Jy
! Component: 1000  -  total flux cleaned = -0.00362951 Jy
! Component: 1050  -  total flux cleaned = -0.00376238 Jy
! Component: 1100  -  total flux cleaned = -0.0039592 Jy
! Component: 1150  -  total flux cleaned = -0.00408885 Jy
! Component: 1200  -  total flux cleaned = -0.00421767 Jy
! Component: 1250  -  total flux cleaned = -0.00440904 Jy
! Component: 1300  -  total flux cleaned = -0.00453522 Jy
! Component: 1350  -  total flux cleaned = -0.00472299 Jy
! Component: 1400  -  total flux cleaned = -0.00484686 Jy
! Component: 1450  -  total flux cleaned = -0.00490798 Jy
! Component: 1500  -  total flux cleaned = -0.00502967 Jy
! Component: 1550  -  total flux cleaned = -0.00521131 Jy
! Component: 1600  -  total flux cleaned = -0.00521145 Jy
! Component: 1650  -  total flux cleaned = -0.00533046 Jy
! Component: 1700  -  total flux cleaned = -0.00544787 Jy
! Component: 1750  -  total flux cleaned = -0.00550635 Jy
! Component: 1800  -  total flux cleaned = -0.0057099 Jy
! Component: 1850  -  total flux cleaned = -0.00568078 Jy
! Component: 1900  -  total flux cleaned = -0.00585209 Jy
! Component: 1950  -  total flux cleaned = -0.00593702 Jy
! Component: 2000  -  total flux cleaned = -0.00610594 Jy
! Component: 2050  -  total flux cleaned = -0.00621732 Jy
! Component: 2100  -  total flux cleaned = -0.00641137 Jy
! Component: 2150  -  total flux cleaned = -0.00641114 Jy
! Component: 2200  -  total flux cleaned = -0.00654785 Jy
! Component: 2250  -  total flux cleaned = -0.00657513 Jy
! Component: 2300  -  total flux cleaned = -0.00676383 Jy
! Component: 2350  -  total flux cleaned = -0.00687077 Jy
! Component: 2400  -  total flux cleaned = -0.00684429 Jy
! Component: 2450  -  total flux cleaned = -0.00702923 Jy
! Component: 2500  -  total flux cleaned = -0.00705558 Jy
! Component: 2550  -  total flux cleaned = -0.0071862 Jy
! Component: 2600  -  total flux cleaned = -0.00731569 Jy
! Component: 2650  -  total flux cleaned = -0.00741897 Jy
! Component: 2700  -  total flux cleaned = -0.00757291 Jy
! Component: 2750  -  total flux cleaned = -0.00770015 Jy
! Component: 2800  -  total flux cleaned = -0.00785204 Jy
! Component: 2850  -  total flux cleaned = -0.00792745 Jy
! Component: 2900  -  total flux cleaned = -0.0081024 Jy
! Component: 2950  -  total flux cleaned = -0.00822667 Jy
! Component: 3000  -  total flux cleaned = -0.00832519 Jy
! Component: 3050  -  total flux cleaned = -0.0084236 Jy
! Component: 3100  -  total flux cleaned = -0.00856996 Jy
! Component: 3150  -  total flux cleaned = -0.00866711 Jy
! Component: 3200  -  total flux cleaned = -0.00881191 Jy
! Component: 3250  -  total flux cleaned = -0.00890803 Jy
! Component: 3300  -  total flux cleaned = -0.00893177 Jy
! Component: 3350  -  total flux cleaned = -0.00905015 Jy
! Component: 3400  -  total flux cleaned = -0.00914454 Jy
! Component: 3450  -  total flux cleaned = -0.00921511 Jy
! Component: 3500  -  total flux cleaned = -0.00940173 Jy
! Component: 3550  -  total flux cleaned = -0.00951789 Jy
! Component: 3600  -  total flux cleaned = -0.00951797 Jy
! Component: 3650  -  total flux cleaned = -0.00963276 Jy
! Component: 3700  -  total flux cleaned = -0.00972413 Jy
! Component: 3750  -  total flux cleaned = -0.00974662 Jy
! Component: 3800  -  total flux cleaned = -0.00985952 Jy
! Component: 3850  -  total flux cleaned = -0.00990455 Jy
! Component: 3900  -  total flux cleaned = -0.0099494 Jy
! Component: 3950  -  total flux cleaned = -0.0101051 Jy
! Component: 4000  -  total flux cleaned = -0.0101937 Jy
! Component: 4050  -  total flux cleaned = -0.0102376 Jy
! Total flux subtracted in 4096 components = -0.0102594 Jy
! Clean residual min=-0.001465 max=0.001354 Jy/beam
! Clean residual mean=-0.000002 rms=0.000392 Jy/beam
! Combined flux in latest and established models = 0.586204 Jy
keep
! Adding 298 model components to the UV plane model.
! The established model now contains 451 components and 0.586204 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uvm//J0710+4732_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.897 x 5.191 at -8.45 degrees (North through East)
! Clean map  min=-0.0024328  max=0.4446 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uvm//J0710+4732_S_b_map.fits
wmodel /image_prod/ug002_uvm//J0710+4732_S_b_map.mod
! Writing 451 model components to file: /image_prod/ug002_uvm//J0710+4732_S_b_map.mod
wobs   /image_prod/ug002_uvm//J0710+4732_S_b_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uvm//J0710+4732_S_b_uvs.fits
wwins  /image_prod/ug002_uvm//J0710+4732_S_b_map.win
! wwins: Wrote 5 windows to /image_prod/ug002_uvm//J0710+4732_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.444595 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000388483 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.262137 0.262137 0.524274 1.04855 2.0971 4.19419 8.38839 16.7768 33.5536 67.1071
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.444 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1144.44 
quit
! Quitting program
! Log file /image_prod/ug002_uvm//J0710+4732_S_b_dfm.log closed on Wed Mar  4 16:46:45 2020