! Started logfile: /image_prod/ug002_uvm//J0538-4405_S_a_dfm.log on Wed Mar  4 16:41:22 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uvm//J0538-4405_S_a_uvm.fits
! Reading UV FITS file: /image_prod/ug002_uvm//J0538-4405_S_a_uvm.fits
! AN table 1: 16 integrations on 15 of 15 possible baselines.
! AN table 2: 8 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.884804 visibilities/baseline/integration-bin.
! Found source: J0538-4405
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 1083 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0538-4405_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 11 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 11 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 11 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=3.347813Jy  sigma=10.857534
! Fit after  self-cal, rms=2.167816Jy  sigma=6.566555
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.35 mas, bmaj=5.969 mas, bpa=-4.558 degrees
! Estimated noise=9.05691 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.04263 Jy
! Component: 100  -  total flux cleaned = 2.68991 Jy
! Total flux subtracted in 100 components = 2.68991 Jy
! Clean residual min=-0.123955 max=0.328218 Jy/beam
! Clean residual mean=-0.001508 rms=0.048501 Jy/beam
! Combined flux in latest and established models = 2.68991 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 2.68991 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.787588Jy  sigma=1.931697
! Fit after  self-cal, rms=0.787353Jy  sigma=1.930889
! Inverting map 
! Added new window around map position (0.5, 15).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.328286 Jy
! Component: 100  -  total flux cleaned = 0.514469 Jy
! Total flux subtracted in 100 components = 0.514469 Jy
! Clean residual min=-0.091611 max=0.099586 Jy/beam
! Clean residual mean=0.000315 rms=0.025953 Jy/beam
! Combined flux in latest and established models = 3.20438 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 22 components and 3.20438 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.495772Jy  sigma=1.343997
! Fit after  self-cal, rms=0.494607Jy  sigma=1.340180
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.842 mas, bmaj=7.731 mas, bpa=-6.331 degrees
! Estimated noise=6.76622 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.111608 Jy
! Component: 100  -  total flux cleaned = 0.164058 Jy
! Component: 150  -  total flux cleaned = 0.189293 Jy
! Component: 200  -  total flux cleaned = 0.192475 Jy
! Total flux subtracted in 200 components = 0.192475 Jy
! Clean residual min=-0.089481 max=0.083055 Jy/beam
! Clean residual mean=0.001386 rms=0.026075 Jy/beam
! Combined flux in latest and established models = 3.39686 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 49 components and 3.39686 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.433644Jy  sigma=1.374752
! Fit after  self-cal, rms=0.433494Jy  sigma=1.374489
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.842 x 7.731 at -6.331 degrees (North through East)
! Clean map  min=-0.08738  max=2.6626 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.92     KP        0.93     LA        0.99     MK        0.97     
!   OV        0.96     PT        0.95     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.06     KP        1.07     LA        1.11     MK        1.04     
!   OV        0.91     PT        1.10     SC        0.97     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.92     KP        0.94     LA        0.98     MK        0.96     
!   OV        0.84     PT        0.96     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.07     KP        1.11     LA        1.15     MK        1.01     
!   OV        1.00     PT        1.10     SC        0.87     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.92     KP        0.93     LA        1.02     MK        0.99     
!   OV        0.96     PT        0.96     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.08     KP        1.11     LA        1.09     MK        0.99     
!   OV        1.00     PT        1.10     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.433494Jy  sigma=1.374489
! Fit after  self-cal, rms=0.147676Jy  sigma=0.480706
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.834 mas, bmaj=7.676 mas, bpa=-6.185 degrees
! Estimated noise=6.76123 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00293043 Jy
! Component: 100  -  total flux cleaned = 0.00279716 Jy
! Component: 150  -  total flux cleaned = 0.00344512 Jy
! Component: 200  -  total flux cleaned = 0.00395505 Jy
! Total flux subtracted in 200 components = 0.00395505 Jy
! Clean residual min=-0.035533 max=0.030367 Jy/beam
! Clean residual mean=-0.000124 rms=0.008855 Jy/beam
! Combined flux in latest and established models = 3.40081 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 56 components and 3.40081 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.138262Jy  sigma=0.452390
! Fit after  self-cal, rms=0.138358Jy  sigma=0.451855
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.138358Jy  sigma=0.451855
! Fit after  self-cal, rms=0.137119Jy  sigma=0.448531
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.834 mas, bmaj=7.664 mas, bpa=-6.181 degrees
! Estimated noise=6.77191 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00756227 Jy
! Component: 100  -  total flux cleaned = 0.00798804 Jy
! Component: 150  -  total flux cleaned = 0.00834209 Jy
! Component: 200  -  total flux cleaned = 0.00833586 Jy
! Total flux subtracted in 200 components = 0.00833586 Jy
! Clean residual min=-0.033460 max=0.027397 Jy/beam
! Clean residual mean=-0.000157 rms=0.008564 Jy/beam
! Combined flux in latest and established models = 3.40915 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 62 components and 3.40915 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.134046Jy  sigma=0.441085
! Fit after  self-cal, rms=0.134059Jy  sigma=0.440875
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000433707 Jy
! Component: 100  -  total flux cleaned = 0.000157962 Jy
! Component: 150  -  total flux cleaned = -0.000114275 Jy
! Component: 200  -  total flux cleaned = -9.28679e-05 Jy
! Total flux subtracted in 200 components = -9.28679e-05 Jy
! Clean residual min=-0.032751 max=0.026888 Jy/beam
! Clean residual mean=-0.000159 rms=0.008418 Jy/beam
! Combined flux in latest and established models = 3.40905 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 65 components and 3.40905 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.133183Jy  sigma=0.437286
! Fit after  self-cal, rms=0.133165Jy  sigma=0.437236
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.133165Jy  sigma=0.437236
! Fit after  self-cal, rms=0.098651Jy  sigma=0.364031
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.833 mas, bmaj=7.671 mas, bpa=-6.12 degrees
! Estimated noise=6.77956 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00471558 Jy
! Component: 100  -  total flux cleaned = 0.00471405 Jy
! Component: 150  -  total flux cleaned = 0.00471208 Jy
! Component: 200  -  total flux cleaned = 0.00470127 Jy
! Total flux subtracted in 200 components = 0.00470127 Jy
! Clean residual min=-0.023089 max=0.020457 Jy/beam
! Clean residual mean=-0.000148 rms=0.004465 Jy/beam
! Combined flux in latest and established models = 3.41376 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 72 components and 3.41376 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097717Jy  sigma=0.360001
! Fit after  self-cal, rms=0.097576Jy  sigma=0.359777
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00106657 Jy
! Component: 100  -  total flux cleaned = 0.000670586 Jy
! Component: 150  -  total flux cleaned = 0.000659159 Jy
! Component: 200  -  total flux cleaned = 0.000656521 Jy
! Total flux subtracted in 200 components = 0.000656521 Jy
! Clean residual min=-0.022092 max=0.019313 Jy/beam
! Clean residual mean=-0.000143 rms=0.004310 Jy/beam
! Combined flux in latest and established models = 3.41441 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 74 components and 3.41441 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.096997Jy  sigma=0.356976
! Fit after  self-cal, rms=0.096936Jy  sigma=0.356884
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.096936Jy  sigma=0.356884
! Fit after  self-cal, rms=0.096900Jy  sigma=0.356312
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.27 mas, bmaj=29.62 mas, bpa=-4.985 degrees
! Estimated noise=10.0038 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00334707 Jy
! Component: 100  -  total flux cleaned = 0.00346505 Jy
! Component: 150  -  total flux cleaned = 0.00346945 Jy
! Component: 200  -  total flux cleaned = 0.00347687 Jy
! Total flux subtracted in 200 components = 0.00347687 Jy
! Clean residual min=-0.016435 max=0.012214 Jy/beam
! Clean residual mean=-0.000303 rms=0.004427 Jy/beam
! Combined flux in latest and established models = 3.41789 Jy
selfcal
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 77 components and 3.41789 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.096777Jy  sigma=0.356497
! Fit after  self-cal, rms=0.096670Jy  sigma=0.356172
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.853e-06 Jy
! Component: 100  -  total flux cleaned = 0.00010885 Jy
! Component: 150  -  total flux cleaned = 0.000114389 Jy
! Component: 200  -  total flux cleaned = 0.000193313 Jy
! Total flux subtracted in 200 components = 0.000193313 Jy
! Clean residual min=-0.016318 max=0.011918 Jy/beam
! Clean residual mean=-0.000299 rms=0.004414 Jy/beam
! Combined flux in latest and established models = 3.41808 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 78 components and 3.41808 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.096784Jy  sigma=0.356828
! Fit after  self-cal, rms=0.096691Jy  sigma=0.356584
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.83 mas, bmaj=7.673 mas, bpa=-6.082 degrees
! Estimated noise=6.78243 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.83 x 7.673 at -6.082 degrees (North through East)
! Clean map  min=-0.021208  max=2.6584 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.096691Jy  sigma=0.356584
! Fit after  self-cal, rms=0.089194Jy  sigma=0.316208
! Inverting map and beam 
! Estimated beam: bmin=2.831 mas, bmaj=7.678 mas, bpa=-6.077 degrees
! Estimated noise=6.79175 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00270638 Jy
! Component: 100  -  total flux cleaned = 0.00291317 Jy
! Component: 150  -  total flux cleaned = 0.00290692 Jy
! Component: 200  -  total flux cleaned = 0.00291006 Jy
! Total flux subtracted in 200 components = 0.00291006 Jy
! Clean residual min=-0.021511 max=0.017890 Jy/beam
! Clean residual mean=-0.000139 rms=0.004133 Jy/beam
! Combined flux in latest and established models = 3.42099 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 86 components and 3.42099 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088470Jy  sigma=0.313126
! Fit after  self-cal, rms=0.088435Jy  sigma=0.313079
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000379372 Jy
! Component: 100  -  total flux cleaned = 0.000379334 Jy
! Component: 150  -  total flux cleaned = 0.000378372 Jy
! Component: 200  -  total flux cleaned = 0.000385818 Jy
! Total flux subtracted in 200 components = 0.000385818 Jy
! Clean residual min=-0.020516 max=0.017217 Jy/beam
! Clean residual mean=-0.000136 rms=0.004023 Jy/beam
! Combined flux in latest and established models = 3.42138 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 87 components and 3.42138 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087945Jy  sigma=0.310743
! Fit after  self-cal, rms=0.087934Jy  sigma=0.310708
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087934Jy  sigma=0.310708
! Fit after  self-cal, rms=0.087820Jy  sigma=0.310349
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.342 mas, bmaj=5.96 mas, bpa=-4.563 degrees
! Estimated noise=8.91997 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.02452 Jy
! Component: 100  -  total flux cleaned = 2.65788 Jy
! Component: 150  -  total flux cleaned = 2.97027 Jy
! Component: 200  -  total flux cleaned = 3.15049 Jy
! Total flux subtracted in 200 components = 3.15049 Jy
! Clean residual min=-0.053212 max=0.102413 Jy/beam
! Clean residual mean=-0.000959 rms=0.016379 Jy/beam
! Combined flux in latest and established models = 3.15049 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 3.15049 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.829 mas, bmaj=7.679 mas, bpa=-6.071 degrees
! Estimated noise=6.79096 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.5, -14.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.150438 Jy
! Component: 100  -  total flux cleaned = 0.220374 Jy
! Component: 150  -  total flux cleaned = 0.255071 Jy
! Component: 200  -  total flux cleaned = 0.273157 Jy
! Total flux subtracted in 200 components = 0.273157 Jy
! Clean residual min=-0.022154 max=0.017591 Jy/beam
! Clean residual mean=-0.000147 rms=0.004287 Jy/beam
! Combined flux in latest and established models = 3.42365 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 78 components and 3.42365 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.27 mas, bmaj=29.65 mas, bpa=-4.985 degrees
! Estimated noise=10.0175 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0091801 Jy
! Component: 100  -  total flux cleaned = 0.00915244 Jy
! Component: 150  -  total flux cleaned = 0.00913936 Jy
! Component: 200  -  total flux cleaned = 0.00913142 Jy
! Total flux subtracted in 200 components = 0.00913142 Jy
! Clean residual min=-0.015332 max=0.012754 Jy/beam
! Clean residual mean=-0.000201 rms=0.004324 Jy/beam
! Combined flux in latest and established models = 3.43278 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000122696 Jy
! Component: 100  -  total flux cleaned = -0.000351807 Jy
! Component: 150  -  total flux cleaned = -0.000575056 Jy
! Component: 200  -  total flux cleaned = -0.000888558 Jy
! Total flux subtracted in 200 components = -0.000888558 Jy
! Clean residual min=-0.015159 max=0.012752 Jy/beam
! Clean residual mean=-0.000214 rms=0.004259 Jy/beam
! Combined flux in latest and established models = 3.43189 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 94 components and 3.43189 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.829 mas, bmaj=7.679 mas, bpa=-6.071 degrees
! Estimated noise=6.79096 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000257784 Jy
! Component: 100  -  total flux cleaned = -7.69379e-05 Jy
! Component: 150  -  total flux cleaned = -9.16783e-05 Jy
! Component: 200  -  total flux cleaned = 0.000155321 Jy
! Total flux subtracted in 200 components = 0.000155321 Jy
! Clean residual min=-0.017468 max=0.016459 Jy/beam
! Clean residual mean=-0.000106 rms=0.003910 Jy/beam
! Combined flux in latest and established models = 3.43205 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 106 components and 3.43205 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086254Jy  sigma=0.306505
! Fit after  self-cal, rms=0.085971Jy  sigma=0.304752
wmodel J0538-4405_S_a_map.mod
! Writing 106 model components to file: J0538-4405_S_a_map.mod
wobs   J0538-4405_S_a_uvs.fits
! Writing UV FITS file: J0538-4405_S_a_uvs.fits
wwins  J0538-4405_S_a_map.win
! wwins: Wrote 3 windows to J0538-4405_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00136674 Jy
! Component: 100  -  total flux cleaned = -0.0016462 Jy
! Component: 150  -  total flux cleaned = -0.00163918 Jy
! Component: 200  -  total flux cleaned = -0.00204769 Jy
! Component: 250  -  total flux cleaned = -0.00151602 Jy
! Component: 300  -  total flux cleaned = -0.000853146 Jy
! Component: 350  -  total flux cleaned = -0.000541097 Jy
! Component: 400  -  total flux cleaned = -0.000536114 Jy
! Component: 450  -  total flux cleaned = -0.00108896 Jy
! Component: 500  -  total flux cleaned = -0.00227051 Jy
! Component: 550  -  total flux cleaned = -0.00327295 Jy
! Component: 600  -  total flux cleaned = -0.00387657 Jy
! Component: 650  -  total flux cleaned = -0.0048061 Jy
! Component: 700  -  total flux cleaned = -0.00581249 Jy
! Component: 750  -  total flux cleaned = -0.00678088 Jy
! Component: 800  -  total flux cleaned = -0.00720031 Jy
! Component: 850  -  total flux cleaned = -0.00760736 Jy
! Component: 900  -  total flux cleaned = -0.00800142 Jy
! Component: 950  -  total flux cleaned = -0.00866657 Jy
! Component: 1000  -  total flux cleaned = -0.00931231 Jy
! Component: 1050  -  total flux cleaned = -0.0100316 Jy
! Component: 1100  -  total flux cleaned = -0.0105569 Jy
! Component: 1150  -  total flux cleaned = -0.0110717 Jy
! Component: 1200  -  total flux cleaned = -0.0114934 Jy
! Component: 1250  -  total flux cleaned = -0.0119884 Jy
! Component: 1300  -  total flux cleaned = -0.0123116 Jy
! Component: 1350  -  total flux cleaned = -0.0127079 Jy
! Component: 1400  -  total flux cleaned = -0.0128646 Jy
! Component: 1450  -  total flux cleaned = -0.0131731 Jy
! Component: 1500  -  total flux cleaned = -0.0135514 Jy
! Component: 1550  -  total flux cleaned = -0.0138495 Jy
! Component: 1600  -  total flux cleaned = -0.0139961 Jy
! Component: 1650  -  total flux cleaned = -0.0141415 Jy
! Component: 1700  -  total flux cleaned = -0.0142127 Jy
! Component: 1750  -  total flux cleaned = -0.014354 Jy
! Component: 1800  -  total flux cleaned = -0.0145642 Jy
! Component: 1850  -  total flux cleaned = -0.014703 Jy
! Component: 1900  -  total flux cleaned = -0.015046 Jy
! Component: 1950  -  total flux cleaned = -0.0153171 Jy
! Component: 2000  -  total flux cleaned = -0.0155863 Jy
! Component: 2050  -  total flux cleaned = -0.0159865 Jy
! Component: 2100  -  total flux cleaned = -0.0162514 Jy
! Component: 2150  -  total flux cleaned = -0.0165802 Jy
! Component: 2200  -  total flux cleaned = -0.0169722 Jy
! Component: 2250  -  total flux cleaned = -0.0172317 Jy
! Component: 2300  -  total flux cleaned = -0.0175548 Jy
! Component: 2350  -  total flux cleaned = -0.0177473 Jy
! Component: 2400  -  total flux cleaned = -0.0179392 Jy
! Component: 2450  -  total flux cleaned = -0.0181942 Jy
! Component: 2500  -  total flux cleaned = -0.0183211 Jy
! Component: 2550  -  total flux cleaned = -0.0185109 Jy
! Component: 2600  -  total flux cleaned = -0.0186367 Jy
! Component: 2650  -  total flux cleaned = -0.018825 Jy
! Component: 2700  -  total flux cleaned = -0.0189502 Jy
! Component: 2750  -  total flux cleaned = -0.0190744 Jy
! Component: 2800  -  total flux cleaned = -0.0190742 Jy
! Component: 2850  -  total flux cleaned = -0.0191359 Jy
! Component: 2900  -  total flux cleaned = -0.0192597 Jy
! Component: 2950  -  total flux cleaned = -0.0193835 Jy
! Component: 3000  -  total flux cleaned = -0.0193214 Jy
! Component: 3050  -  total flux cleaned = -0.0195069 Jy
! Component: 3100  -  total flux cleaned = -0.0194447 Jy
! Component: 3150  -  total flux cleaned = -0.0193823 Jy
! Component: 3200  -  total flux cleaned = -0.0191333 Jy
! Component: 3250  -  total flux cleaned = -0.0191329 Jy
! Component: 3300  -  total flux cleaned = -0.0188824 Jy
! Component: 3350  -  total flux cleaned = -0.0186936 Jy
! Component: 3400  -  total flux cleaned = -0.0185673 Jy
! Component: 3450  -  total flux cleaned = -0.0181221 Jy
! Component: 3500  -  total flux cleaned = -0.0179298 Jy
! Component: 3550  -  total flux cleaned = -0.0176714 Jy
! Component: 3600  -  total flux cleaned = -0.0174105 Jy
! Component: 3650  -  total flux cleaned = -0.0170822 Jy
! Component: 3700  -  total flux cleaned = -0.0167512 Jy
! Component: 3750  -  total flux cleaned = -0.0164173 Jy
! Component: 3800  -  total flux cleaned = -0.0162827 Jy
! Component: 3850  -  total flux cleaned = -0.0158746 Jy
! Component: 3900  -  total flux cleaned = -0.0156002 Jy
! Component: 3950  -  total flux cleaned = -0.0153228 Jy
! Component: 4000  -  total flux cleaned = -0.0150424 Jy
! Component: 4050  -  total flux cleaned = -0.0147607 Jy
! Total flux subtracted in 4096 components = -0.0144043 Jy
! Clean residual min=-0.004288 max=0.004432 Jy/beam
! Clean residual mean=0.000066 rms=0.001215 Jy/beam
! Combined flux in latest and established models = 3.41764 Jy
keep
! Adding 199 model components to the UV plane model.
! The established model now contains 305 components and 3.41764 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uvm//J0538-4405_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.829 x 7.679 at -6.071 degrees (North through East)
! Clean map  min=-0.011921  max=2.5124 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uvm//J0538-4405_S_a_map.fits
wmodel /image_prod/ug002_uvm//J0538-4405_S_a_map.mod
! Writing 305 model components to file: /image_prod/ug002_uvm//J0538-4405_S_a_map.mod
wobs   /image_prod/ug002_uvm//J0538-4405_S_a_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uvm//J0538-4405_S_a_uvs.fits
wwins  /image_prod/ug002_uvm//J0538-4405_S_a_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uvm//J0538-4405_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 2.51242 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00144211 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.172197 0.172197 0.344394 0.688789 1.37758 2.75516 5.51031 11.0206 22.0412 44.0825 88.165
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0043 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       2.512 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1742.19 
quit
! Quitting program
! Log file /image_prod/ug002_uvm//J0538-4405_S_a_dfm.log closed on Wed Mar  4 16:41:26 2020