! Started logfile: /image_prod/ug002_uvm//J0533+4822_X_a_dfm.log on Wed Mar 4 16:40:49 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J0533+4822_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J0533+4822_X_a_uvm.fits ! AN table 1: 24 integrations on 45 of 45 possible baselines. ! AN table 2: 12 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.758598 visibilities/baseline/integration-bin. ! Found source: J0533+4822 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 13764 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0533+4822_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 44 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 44 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 44 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 44 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 44 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 44 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 44 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 44 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 44 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 44 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 44 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 44 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.552222Jy sigma=9.660101 ! Fit after self-cal, rms=0.281483Jy sigma=1.782777 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6931 mas, bmaj=1.475 mas, bpa=17.43 degrees ! Estimated noise=1.41649 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.88679 Jy ! Component: 100 - total flux cleaned = 1.08017 Jy ! Total flux subtracted in 100 components = 1.08017 Jy ! Clean residual min=-0.033984 max=0.065719 Jy/beam ! Clean residual mean=0.000157 rms=0.007604 Jy/beam ! Combined flux in latest and established models = 1.08017 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1.08017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.243131Jy sigma=1.559073 ! Fit after self-cal, rms=0.243130Jy sigma=1.559065 ! Inverting map ! Added new window around map position (-2, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0650423 Jy ! Component: 100 - total flux cleaned = 0.100243 Jy ! Total flux subtracted in 100 components = 0.100243 Jy ! Clean residual min=-0.031964 max=0.053132 Jy/beam ! Clean residual mean=0.000139 rms=0.007028 Jy/beam ! Combined flux in latest and established models = 1.18041 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 10 components and 1.18041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.221341Jy sigma=1.425725 ! Fit after self-cal, rms=0.220551Jy sigma=1.420456 ! Inverting map ! Added new window around map position (2, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0389692 Jy ! Component: 100 - total flux cleaned = 0.0606104 Jy ! Total flux subtracted in 100 components = 0.0606104 Jy ! Clean residual min=-0.032386 max=0.030757 Jy/beam ! Clean residual mean=0.000130 rms=0.006741 Jy/beam ! Combined flux in latest and established models = 1.24102 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 22 components and 1.24102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.212898Jy sigma=1.366428 ! Fit after self-cal, rms=0.212606Jy sigma=1.364631 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8664 mas, bmaj=1.702 mas, bpa=16.29 degrees ! Estimated noise=1.01836 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0224997 Jy ! Component: 100 - total flux cleaned = 0.037636 Jy ! Component: 150 - total flux cleaned = 0.0442816 Jy ! Component: 200 - total flux cleaned = 0.0502569 Jy ! Total flux subtracted in 200 components = 0.0502569 Jy ! Clean residual min=-0.030635 max=0.032667 Jy/beam ! Clean residual mean=0.000216 rms=0.008131 Jy/beam ! Combined flux in latest and established models = 1.29128 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 39 components and 1.29128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.209022Jy sigma=1.345761 ! Fit after self-cal, rms=0.208918Jy sigma=1.345127 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8664 x 1.702 at 16.29 degrees (North through East) ! Clean map min=-0.029786 max=1.1344 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.95 HN 1.00 KP 1.19 ! LA 0.99 MK 1.05 NL 1.16 OV 0.95 ! PT 0.87 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 HN 0.88 KP 1.05 LA 1.05 ! MK 1.01 NL 1.14 OV 0.89 PT 0.89 ! SC 1.04 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.93 HN 1.02 KP 1.19 ! LA 0.99 MK 1.04 NL 1.16 OV 0.96 ! PT 0.87 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 HN 0.87 KP 1.07 LA 1.03 ! MK 1.03 NL 1.11 OV 0.90 PT 0.93 ! SC 1.04 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.92 HN 1.00 KP 1.20 ! LA 1.01 MK 1.04 NL 1.16 OV 0.95 ! PT 0.86 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 HN 0.87 KP 1.04 LA 1.05 ! MK 1.01 NL 1.13 OV 0.92 PT 0.92 ! SC 1.06 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.93 HN 1.00 KP 1.18 ! LA 1.00 MK 1.07 NL 1.16 OV 0.94 ! PT 0.88 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 HN 0.88 KP 1.05 LA 1.05 ! MK 1.05 NL 1.16 OV 0.91 PT 0.91 ! SC 1.07 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.94 HN 0.99 KP 1.20 ! LA 1.01 MK 1.04 NL 1.14 OV 0.94 ! PT 0.86 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 HN 0.88 KP 1.05 LA 1.06 ! MK 1.02 NL 1.11 OV 0.90 PT 0.91 ! SC 1.06 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.95 HN 1.01 KP 1.22 ! LA 1.00 MK 1.05 NL 1.17 OV 0.95 ! PT 0.85 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 HN 0.89 KP 1.06 LA 1.04 ! MK 1.05 NL 1.14 OV 0.90 PT 0.95 ! SC 1.09 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.93 HN 1.00 KP 1.20 ! LA 1.00 MK 1.05 NL 1.17 OV 0.95 ! PT 0.87 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 HN 0.92 KP 1.05 LA 1.04 ! MK 1.07 NL 1.11 OV 0.93 PT 0.91 ! SC 1.07 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.93 HN 1.01 KP 1.22 ! LA 0.98 MK 1.05 NL 1.18 OV 0.95 ! PT 0.86 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 HN 0.90 KP 1.06 LA 1.05 ! MK 1.07 NL 1.13 OV 0.91 PT 0.92 ! SC 1.11 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.93 HN 0.99 KP 1.18 ! LA 1.01 MK 1.07 NL 1.15 OV 0.95 ! PT 0.86 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 HN 0.92 KP 1.04 LA 1.04 ! MK 1.10 NL 1.11 OV 0.91 PT 0.92 ! SC 1.08 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.94 HN 1.02 KP 1.24 ! LA 1.01 MK 1.06 NL 1.17 OV 0.95 ! PT 0.86 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 HN 0.89 KP 1.03 LA 1.05 ! MK 1.10 NL 1.14 OV 0.93 PT 0.92 ! SC 1.10 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.92 HN 1.00 KP 1.18 ! LA 1.01 MK 1.03 NL 1.14 OV 0.95 ! PT 0.86 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 HN 0.93 KP 1.05 LA 1.05 ! MK 1.08 NL 1.10 OV 0.92 PT 0.92 ! SC 1.08 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.92 HN 1.01 KP 1.14 ! LA 1.01 MK 1.05 NL 1.20 OV 0.95 ! PT 0.87 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 HN 0.89 KP 1.05 LA 1.03 ! MK 1.13 NL 1.14 OV 0.92 PT 0.91 ! SC 1.13 ! ! ! Fit before self-cal, rms=0.208918Jy sigma=1.345127 ! Fit after self-cal, rms=0.174312Jy sigma=1.020266 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8705 mas, bmaj=1.705 mas, bpa=16.34 degrees ! Estimated noise=1.01998 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0291736 Jy ! Component: 100 - total flux cleaned = -0.0410852 Jy ! Component: 150 - total flux cleaned = -0.0440439 Jy ! Component: 200 - total flux cleaned = -0.0468267 Jy ! Total flux subtracted in 200 components = -0.0468267 Jy ! Clean residual min=-0.025388 max=0.024500 Jy/beam ! Clean residual mean=0.000131 rms=0.005938 Jy/beam ! Combined flux in latest and established models = 1.24445 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 50 components and 1.24445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.168817Jy sigma=0.991528 ! Fit after self-cal, rms=0.168792Jy sigma=0.991312 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.168792Jy sigma=0.991312 ! Fit after self-cal, rms=0.079119Jy sigma=0.449303 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8694 mas, bmaj=1.699 mas, bpa=15.95 degrees ! Estimated noise=1.01683 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00178245 Jy ! Component: 100 - total flux cleaned = -0.00146505 Jy ! Component: 150 - total flux cleaned = -0.00189987 Jy ! Component: 200 - total flux cleaned = -0.00276675 Jy ! Total flux subtracted in 200 components = -0.00276675 Jy ! Clean residual min=-0.006055 max=0.009808 Jy/beam ! Clean residual mean=0.000009 rms=0.001191 Jy/beam ! Combined flux in latest and established models = 1.24169 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 60 components and 1.24169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076824Jy sigma=0.435077 ! Fit after self-cal, rms=0.076816Jy sigma=0.434696 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.2, 3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00859455 Jy ! Component: 100 - total flux cleaned = 0.0111256 Jy ! Component: 150 - total flux cleaned = 0.0116437 Jy ! Component: 200 - total flux cleaned = 0.0112028 Jy ! Total flux subtracted in 200 components = 0.0112028 Jy ! Clean residual min=-0.005405 max=0.005888 Jy/beam ! Clean residual mean=-0.000001 rms=0.001062 Jy/beam ! Combined flux in latest and established models = 1.25289 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 74 components and 1.25289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075616Jy sigma=0.425621 ! Fit after self-cal, rms=0.075515Jy sigma=0.424887 ! Inverting map ! Added new window around map position (6.6, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00283076 Jy ! Component: 100 - total flux cleaned = 0.00410457 Jy ! Component: 150 - total flux cleaned = 0.00383674 Jy ! Component: 200 - total flux cleaned = 0.0035893 Jy ! Total flux subtracted in 200 components = 0.0035893 Jy ! Clean residual min=-0.005093 max=0.005495 Jy/beam ! Clean residual mean=-0.000003 rms=0.001000 Jy/beam ! Combined flux in latest and established models = 1.25648 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 91 components and 1.25648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074968Jy sigma=0.419798 ! Fit after self-cal, rms=0.074942Jy sigma=0.419572 ! Inverting map ! Added new window around map position (2.2, 7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00489079 Jy ! Component: 100 - total flux cleaned = 0.00478807 Jy ! Component: 150 - total flux cleaned = 0.00479239 Jy ! Component: 200 - total flux cleaned = 0.0047941 Jy ! Total flux subtracted in 200 components = 0.0047941 Jy ! Clean residual min=-0.005064 max=0.004621 Jy/beam ! Clean residual mean=-0.000007 rms=0.000948 Jy/beam ! Combined flux in latest and established models = 1.26127 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 107 components and 1.26127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074443Jy sigma=0.416082 ! Fit after self-cal, rms=0.074425Jy sigma=0.415965 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074425Jy sigma=0.415965 ! Fit after self-cal, rms=0.073473Jy sigma=0.408581 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8673 mas, bmaj=1.698 mas, bpa=15.82 degrees ! Estimated noise=1.0181 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00182513 Jy ! Component: 100 - total flux cleaned = -0.00131529 Jy ! Component: 150 - total flux cleaned = -0.000629488 Jy ! Component: 200 - total flux cleaned = -0.000511812 Jy ! Total flux subtracted in 200 components = -0.000511812 Jy ! Clean residual min=-0.003876 max=0.004084 Jy/beam ! Clean residual mean=-0.000001 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 1.26076 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 115 components and 1.26076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072627Jy sigma=0.403508 ! Fit after self-cal, rms=0.072617Jy sigma=0.403450 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.4, 11.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119129 Jy ! Component: 100 - total flux cleaned = 0.00108546 Jy ! Component: 150 - total flux cleaned = 0.000698674 Jy ! Component: 200 - total flux cleaned = 0.000612526 Jy ! Total flux subtracted in 200 components = 0.000612526 Jy ! Clean residual min=-0.003916 max=0.003969 Jy/beam ! Clean residual mean=-0.000002 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 1.26137 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 130 components and 1.26137 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072288Jy sigma=0.401177 ! Fit after self-cal, rms=0.072280Jy sigma=0.401116 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072280Jy sigma=0.401116 ! Fit after self-cal, rms=0.072137Jy sigma=0.399277 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.109 mas, bmaj=2.507 mas, bpa=13.8 degrees ! Estimated noise=1.4083 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00305789 Jy ! Component: 100 - total flux cleaned = -0.00358975 Jy ! Component: 150 - total flux cleaned = -0.00370399 Jy ! Component: 200 - total flux cleaned = -0.00379434 Jy ! Total flux subtracted in 200 components = -0.00379434 Jy ! Clean residual min=-0.003190 max=0.003508 Jy/beam ! Clean residual mean=0.000010 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 1.25758 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 154 components and 1.25758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072107Jy sigma=0.399207 ! Fit after self-cal, rms=0.072098Jy sigma=0.399117 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-22.4, -4.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170338 Jy ! Component: 100 - total flux cleaned = 0.0023522 Jy ! Component: 150 - total flux cleaned = 0.0026545 Jy ! Component: 200 - total flux cleaned = 0.00278793 Jy ! Total flux subtracted in 200 components = 0.00278793 Jy ! Clean residual min=-0.002995 max=0.003497 Jy/beam ! Clean residual mean=0.000012 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 1.26037 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 186 components and 1.26037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071956Jy sigma=0.398523 ! Fit after self-cal, rms=0.071948Jy sigma=0.398442 ! Inverting map ! Added new window around map position (10.4, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.001443 Jy ! Component: 100 - total flux cleaned = 0.00207742 Jy ! Component: 150 - total flux cleaned = 0.00282326 Jy ! Component: 200 - total flux cleaned = 0.00337462 Jy ! Total flux subtracted in 200 components = 0.00337462 Jy ! Clean residual min=-0.002702 max=0.002609 Jy/beam ! Clean residual mean=0.000012 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 1.26374 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 214 components and 1.26374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071788Jy sigma=0.397396 ! Fit after self-cal, rms=0.071782Jy sigma=0.397349 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8662 mas, bmaj=1.698 mas, bpa=15.74 degrees ! Estimated noise=1.01888 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8662 x 1.698 at 15.74 degrees (North through East) ! Clean map min=-0.0047807 max=1.1438 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071782Jy sigma=0.397349 ! Fit after self-cal, rms=0.059350Jy sigma=0.338596 ! Inverting map and beam ! Estimated beam: bmin=0.8666 mas, bmaj=1.698 mas, bpa=15.76 degrees ! Estimated noise=1.02074 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00030905 Jy ! Component: 100 - total flux cleaned = -0.00030975 Jy ! Component: 150 - total flux cleaned = -0.000407635 Jy ! Component: 200 - total flux cleaned = -0.000315136 Jy ! Total flux subtracted in 200 components = -0.000315136 Jy ! Clean residual min=-0.003509 max=0.003065 Jy/beam ! Clean residual mean=0.000003 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 1.26343 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 232 components and 1.26343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058869Jy sigma=0.335831 ! Fit after self-cal, rms=0.058865Jy sigma=0.335816 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.90613e-05 Jy ! Component: 100 - total flux cleaned = 0.000266817 Jy ! Component: 150 - total flux cleaned = 0.000263664 Jy ! Component: 200 - total flux cleaned = 0.00042151 Jy ! Total flux subtracted in 200 components = 0.00042151 Jy ! Clean residual min=-0.003392 max=0.003058 Jy/beam ! Clean residual mean=0.000003 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 1.26385 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 248 components and 1.26385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058662Jy sigma=0.334474 ! Fit after self-cal, rms=0.058661Jy sigma=0.334464 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058661Jy sigma=0.334464 ! Fit after self-cal, rms=0.058614Jy sigma=0.333771 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6931 mas, bmaj=1.476 mas, bpa=16.91 degrees ! Estimated noise=1.42476 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.890945 Jy ! Component: 100 - total flux cleaned = 1.08557 Jy ! Component: 150 - total flux cleaned = 1.13963 Jy ! Component: 200 - total flux cleaned = 1.16671 Jy ! Total flux subtracted in 200 components = 1.16671 Jy ! Clean residual min=-0.007441 max=0.013675 Jy/beam ! Clean residual mean=0.000024 rms=0.001510 Jy/beam ! Combined flux in latest and established models = 1.16671 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 1.16671 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8658 mas, bmaj=1.698 mas, bpa=15.72 degrees ! Estimated noise=1.02146 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0231112 Jy ! Component: 100 - total flux cleaned = 0.0387645 Jy ! Component: 150 - total flux cleaned = 0.0502342 Jy ! Component: 200 - total flux cleaned = 0.0590172 Jy ! Total flux subtracted in 200 components = 0.0590172 Jy ! Clean residual min=-0.003829 max=0.005995 Jy/beam ! Clean residual mean=0.000031 rms=0.000943 Jy/beam ! Combined flux in latest and established models = 1.22573 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 38 components and 1.22573 Jy ! Inverting map ! Added new window around map position (0.4, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00726822 Jy ! Component: 100 - total flux cleaned = 0.0132624 Jy ! Component: 150 - total flux cleaned = 0.017945 Jy ! Component: 200 - total flux cleaned = 0.0210268 Jy ! Total flux subtracted in 200 components = 0.0210268 Jy ! Clean residual min=-0.003360 max=0.003791 Jy/beam ! Clean residual mean=0.000015 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 1.24676 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 60 components and 1.24676 Jy ! Inverting map ! Added new window around map position (-3.2, -11.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00313981 Jy ! Component: 100 - total flux cleaned = 0.00542763 Jy ! Component: 150 - total flux cleaned = 0.00726802 Jy ! Component: 200 - total flux cleaned = 0.00872118 Jy ! Total flux subtracted in 200 components = 0.00872118 Jy ! Clean residual min=-0.003220 max=0.003526 Jy/beam ! Clean residual mean=0.000009 rms=0.000704 Jy/beam ! Combined flux in latest and established models = 1.25548 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 79 components and 1.25548 Jy ! Inverting map ! Added new window around map position (-0.4, -3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00270999 Jy ! Component: 100 - total flux cleaned = 0.00381523 Jy ! Component: 150 - total flux cleaned = 0.0045122 Jy ! Component: 200 - total flux cleaned = 0.00484824 Jy ! Total flux subtracted in 200 components = 0.00484824 Jy ! Clean residual min=-0.003007 max=0.003122 Jy/beam ! Clean residual mean=0.000006 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 1.26033 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 109 components and 1.26033 Jy ! Inverting map ! Added new window around map position (-9, -26.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186838 Jy ! Component: 100 - total flux cleaned = 0.00239085 Jy ! Component: 150 - total flux cleaned = 0.00259022 Jy ! Component: 200 - total flux cleaned = 0.00278482 Jy ! Total flux subtracted in 200 components = 0.00278482 Jy ! Clean residual min=-0.002852 max=0.002912 Jy/beam ! Clean residual mean=0.000006 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 1.26311 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 126 components and 1.26311 Jy ! Inverting map ! Added new window around map position (-5.4, 17.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000865559 Jy ! Component: 100 - total flux cleaned = 0.00115238 Jy ! Component: 150 - total flux cleaned = 0.00151929 Jy ! Component: 200 - total flux cleaned = 0.00152116 Jy ! Total flux subtracted in 200 components = 0.00152116 Jy ! Clean residual min=-0.002816 max=0.002801 Jy/beam ! Clean residual mean=0.000005 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 1.26463 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 153 components and 1.26463 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.11 mas, bmaj=2.508 mas, bpa=13.88 degrees ! Estimated noise=1.41229 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168267 Jy ! Component: 100 - total flux cleaned = 0.00261435 Jy ! Component: 150 - total flux cleaned = 0.00340545 Jy ! Component: 200 - total flux cleaned = 0.00382256 Jy ! Total flux subtracted in 200 components = 0.00382256 Jy ! Clean residual min=-0.002400 max=0.002588 Jy/beam ! Clean residual mean=0.000011 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 1.26845 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000192395 Jy ! Component: 100 - total flux cleaned = 0.000310598 Jy ! Component: 150 - total flux cleaned = 0.000307594 Jy ! Component: 200 - total flux cleaned = 0.000413074 Jy ! Total flux subtracted in 200 components = 0.000413074 Jy ! Clean residual min=-0.002316 max=0.002372 Jy/beam ! Clean residual mean=0.000012 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 1.26887 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 209 components and 1.26887 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8658 mas, bmaj=1.698 mas, bpa=15.72 degrees ! Estimated noise=1.02146 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.75783e-05 Jy ! Component: 100 - total flux cleaned = -2.7844e-05 Jy ! Component: 150 - total flux cleaned = -2.66829e-05 Jy ! Component: 200 - total flux cleaned = 5.3001e-05 Jy ! Total flux subtracted in 200 components = 5.3001e-05 Jy ! Clean residual min=-0.002557 max=0.002852 Jy/beam ! Clean residual mean=0.000005 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 1.26892 Jy selfcal ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 229 components and 1.26892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058062Jy sigma=0.329982 ! Fit after self-cal, rms=0.058018Jy sigma=0.329609 wmodel J0533+4822_X_a_map.mod ! Writing 229 model components to file: J0533+4822_X_a_map.mod wobs J0533+4822_X_a_uvs.fits ! Writing UV FITS file: J0533+4822_X_a_uvs.fits wwins J0533+4822_X_a_map.win ! wwins: Wrote 14 windows to J0533+4822_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000566242 Jy ! Component: 100 - total flux cleaned = 0.000988033 Jy ! Component: 150 - total flux cleaned = 0.00125695 Jy ! Component: 200 - total flux cleaned = 0.00155969 Jy ! Component: 250 - total flux cleaned = 0.00155952 Jy ! Component: 300 - total flux cleaned = 0.00172467 Jy ! Component: 350 - total flux cleaned = 0.00176522 Jy ! Component: 400 - total flux cleaned = 0.00176587 Jy ! Component: 450 - total flux cleaned = 0.001961 Jy ! Component: 500 - total flux cleaned = 0.00207575 Jy ! Component: 550 - total flux cleaned = 0.00215104 Jy ! Component: 600 - total flux cleaned = 0.00229942 Jy ! Component: 650 - total flux cleaned = 0.00244568 Jy ! Component: 700 - total flux cleaned = 0.0025897 Jy ! Component: 750 - total flux cleaned = 0.00273195 Jy ! Component: 800 - total flux cleaned = 0.00290808 Jy ! Component: 850 - total flux cleaned = 0.00308203 Jy ! Component: 900 - total flux cleaned = 0.00321954 Jy ! Component: 950 - total flux cleaned = 0.00342339 Jy ! Component: 1000 - total flux cleaned = 0.00342314 Jy ! Component: 1050 - total flux cleaned = 0.00352367 Jy ! Component: 1100 - total flux cleaned = 0.00368844 Jy ! Component: 1150 - total flux cleaned = 0.00381862 Jy ! Component: 1200 - total flux cleaned = 0.00388276 Jy ! Component: 1250 - total flux cleaned = 0.0039791 Jy ! Component: 1300 - total flux cleaned = 0.004011 Jy ! Component: 1350 - total flux cleaned = 0.0041679 Jy ! Component: 1400 - total flux cleaned = 0.00426092 Jy ! Component: 1450 - total flux cleaned = 0.00435349 Jy ! Component: 1500 - total flux cleaned = 0.00450634 Jy ! Component: 1550 - total flux cleaned = 0.00453592 Jy ! Component: 1600 - total flux cleaned = 0.00465565 Jy ! Component: 1650 - total flux cleaned = 0.00459596 Jy ! Component: 1700 - total flux cleaned = 0.00483253 Jy ! Component: 1750 - total flux cleaned = 0.00506723 Jy ! Component: 1800 - total flux cleaned = 0.00509609 Jy ! Component: 1850 - total flux cleaned = 0.00526932 Jy ! Component: 1900 - total flux cleaned = 0.0053552 Jy ! Component: 1950 - total flux cleaned = 0.005526 Jy ! Component: 2000 - total flux cleaned = 0.00566713 Jy ! Component: 2050 - total flux cleaned = 0.00572321 Jy ! Component: 2100 - total flux cleaned = 0.00594544 Jy ! Component: 2150 - total flux cleaned = 0.00602843 Jy ! Component: 2200 - total flux cleaned = 0.00616559 Jy ! Component: 2250 - total flux cleaned = 0.00646534 Jy ! Component: 2300 - total flux cleaned = 0.00649218 Jy ! Component: 2350 - total flux cleaned = 0.00662625 Jy ! Component: 2400 - total flux cleaned = 0.00681324 Jy ! Component: 2450 - total flux cleaned = 0.00681341 Jy ! Component: 2500 - total flux cleaned = 0.00699772 Jy ! Component: 2550 - total flux cleaned = 0.0070761 Jy ! Component: 2600 - total flux cleaned = 0.00720606 Jy ! Component: 2650 - total flux cleaned = 0.00720585 Jy ! Component: 2700 - total flux cleaned = 0.00728324 Jy ! Component: 2750 - total flux cleaned = 0.0073597 Jy ! Component: 2800 - total flux cleaned = 0.00753726 Jy ! Component: 2850 - total flux cleaned = 0.00756231 Jy ! Component: 2900 - total flux cleaned = 0.00761225 Jy ! Component: 2950 - total flux cleaned = 0.00763724 Jy ! Component: 3000 - total flux cleaned = 0.00773611 Jy ! Component: 3050 - total flux cleaned = 0.00783453 Jy ! Component: 3100 - total flux cleaned = 0.00790763 Jy ! Component: 3150 - total flux cleaned = 0.00802926 Jy ! Component: 3200 - total flux cleaned = 0.00802928 Jy ! Component: 3250 - total flux cleaned = 0.00822136 Jy ! Component: 3300 - total flux cleaned = 0.00826902 Jy ! Component: 3350 - total flux cleaned = 0.00838749 Jy ! Component: 3400 - total flux cleaned = 0.00845839 Jy ! Component: 3450 - total flux cleaned = 0.0085759 Jy ! Component: 3500 - total flux cleaned = 0.00864595 Jy ! Component: 3550 - total flux cleaned = 0.00876213 Jy ! Component: 3600 - total flux cleaned = 0.0087621 Jy ! Component: 3650 - total flux cleaned = 0.00878511 Jy ! Component: 3700 - total flux cleaned = 0.00894508 Jy ! Component: 3750 - total flux cleaned = 0.0089678 Jy ! Component: 3800 - total flux cleaned = 0.00912619 Jy ! Component: 3850 - total flux cleaned = 0.00903603 Jy ! Component: 3900 - total flux cleaned = 0.00908089 Jy ! Component: 3950 - total flux cleaned = 0.00919251 Jy ! Component: 4000 - total flux cleaned = 0.00923685 Jy ! Component: 4050 - total flux cleaned = 0.00934724 Jy ! Total flux subtracted in 4096 components = 0.00936932 Jy ! Clean residual min=-0.001162 max=0.001098 Jy/beam ! Clean residual mean=0.000002 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 1.27829 Jy keep ! Adding 295 model components to the UV plane model. ! The established model now contains 522 components and 1.27829 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J0533+4822_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8658 x 1.698 at 15.72 degrees (North through East) ! Clean map min=-0.0026248 max=1.1515 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J0533+4822_X_a_map.fits wmodel /image_prod/ug002_uvm//J0533+4822_X_a_map.mod ! Writing 522 model components to file: /image_prod/ug002_uvm//J0533+4822_X_a_map.mod wobs /image_prod/ug002_uvm//J0533+4822_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J0533+4822_X_a_uvs.fits wwins /image_prod/ug002_uvm//J0533+4822_X_a_map.win ! wwins: Wrote 15 windows to /image_prod/ug002_uvm//J0533+4822_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.15154 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000378399 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0985808 0.0985808 0.197162 0.394323 0.788646 1.57729 3.15459 6.30917 12.6183 25.2367 50.4734 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.151 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3043.19 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J0533+4822_X_a_dfm.log closed on Wed Mar 4 16:40:55 2020