! Started logfile: /image_prod/ug002_uvm//J0443+3441_X_b_dfm.log on Wed Mar 4 16:39:18 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J0443+3441_X_b_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J0443+3441_X_b_uvm.fits ! AN table 1: 24 integrations on 45 of 45 possible baselines. ! AN table 2: 21 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.885621 visibilities/baseline/integration-bin. ! Found source: J0443+3441 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 19512 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0443+3441_X_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.019578Jy sigma=9.461223 ! Fit after self-cal, rms=0.832062Jy sigma=7.684242 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7234 mas, bmaj=1.35 mas, bpa=-2.529 degrees ! Estimated noise=0.861614 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.120774 Jy ! Component: 100 - total flux cleaned = 0.155071 Jy ! Total flux subtracted in 100 components = 0.155071 Jy ! Clean residual min=-0.011187 max=0.046636 Jy/beam ! Clean residual mean=0.000006 rms=0.002389 Jy/beam ! Combined flux in latest and established models = 0.15507 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.15507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097048Jy sigma=0.886153 ! Fit after self-cal, rms=0.096849Jy sigma=0.884008 ! Inverting map ! Added new window around map position (-0.2, -2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0383425 Jy ! Component: 100 - total flux cleaned = 0.0566327 Jy ! Total flux subtracted in 100 components = 0.0566327 Jy ! Clean residual min=-0.008745 max=0.013078 Jy/beam ! Clean residual mean=0.000004 rms=0.001607 Jy/beam ! Combined flux in latest and established models = 0.211703 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 18 components and 0.211703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076986Jy sigma=0.690297 ! Fit after self-cal, rms=0.074318Jy sigma=0.667857 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0170226 Jy ! Component: 100 - total flux cleaned = 0.0268694 Jy ! Total flux subtracted in 100 components = 0.0268694 Jy ! Clean residual min=-0.006988 max=0.007627 Jy/beam ! Clean residual mean=0.000003 rms=0.001253 Jy/beam ! Combined flux in latest and established models = 0.238573 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 22 components and 0.238573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068869Jy sigma=0.614539 ! Fit after self-cal, rms=0.068454Jy sigma=0.611322 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00842068 Jy ! Component: 100 - total flux cleaned = 0.0138369 Jy ! Total flux subtracted in 100 components = 0.0138369 Jy ! Clean residual min=-0.006282 max=0.007099 Jy/beam ! Clean residual mean=0.000002 rms=0.001166 Jy/beam ! Combined flux in latest and established models = 0.25241 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 25 components and 0.25241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066896Jy sigma=0.596619 ! Fit after self-cal, rms=0.066805Jy sigma=0.595974 ! Inverting map ! Added new window around map position (-1.8, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00701329 Jy ! Component: 100 - total flux cleaned = 0.0108124 Jy ! Total flux subtracted in 100 components = 0.0108124 Jy ! Clean residual min=-0.006443 max=0.005625 Jy/beam ! Clean residual mean=0.000002 rms=0.001116 Jy/beam ! Combined flux in latest and established models = 0.263222 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 32 components and 0.263222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065869Jy sigma=0.586486 ! Fit after self-cal, rms=0.065798Jy sigma=0.585768 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.944 mas, bmaj=1.62 mas, bpa=2.215 degrees ! Estimated noise=0.560581 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00551079 Jy ! Component: 100 - total flux cleaned = 0.00902666 Jy ! Component: 150 - total flux cleaned = 0.0115061 Jy ! Component: 200 - total flux cleaned = 0.0123504 Jy ! Total flux subtracted in 200 components = 0.0123504 Jy ! Clean residual min=-0.007208 max=0.006195 Jy/beam ! Clean residual mean=0.000006 rms=0.001247 Jy/beam ! Combined flux in latest and established models = 0.275572 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 46 components and 0.275572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065239Jy sigma=0.580823 ! Fit after self-cal, rms=0.065194Jy sigma=0.580349 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.944 x 1.62 at 2.215 degrees (North through East) ! Clean map min=-0.0062897 max=0.16286 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.87 KP 1.08 ! LA 1.04 MK 1.31 NL 1.19 OV 0.91 ! PT 0.90 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.01 HN 0.88 KP 1.01 ! LA 1.03 MK 0.92 OV 0.91 PT 0.92 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 0.92 KP 1.06 ! LA 1.04 MK 1.46 NL 1.20 OV 0.92 ! PT 0.89 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.00 HN 0.90 KP 1.01 ! LA 0.99 MK 0.91 OV 0.91 PT 0.93 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 HN 0.94 KP 1.08 ! LA 1.06 MK 1.29 NL 1.20 OV 0.95 ! PT 0.90 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.01 HN 0.88 KP 1.04 ! LA 0.99 MK 0.91 OV 0.91 PT 0.90 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 0.89 KP 1.06 ! LA 1.06 MK 1.32 NL 1.23 OV 0.93 ! PT 0.90 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.00 HN 0.90 KP 1.02 ! LA 1.01 MK 0.94 OV 0.91 PT 0.92 ! SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.03 HN 0.91 KP 1.06 ! LA 1.06 MK 1.34 NL 1.21 OV 0.93 ! PT 0.90 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.02 HN 0.90 KP 1.01 ! LA 1.04 MK 0.93 OV 0.92 PT 0.94 ! SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 0.91 KP 1.05 ! LA 1.06 MK 1.38 NL 1.20 OV 0.92 ! PT 0.90 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.02 HN 0.89 KP 1.03 ! LA 1.01 MK 0.89 OV 0.92 PT 0.91 ! SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.06 HN 0.91 KP 1.05 ! LA 1.06 MK 1.34 NL 1.21 OV 0.93 ! PT 0.92 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.00 HN 0.90 KP 1.04 ! LA 1.04 MK 0.95 OV 0.93 PT 0.91 ! SC 0.98 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 0.91 KP 1.10 ! LA 1.08 MK 1.37 NL 1.23 OV 0.93 ! PT 0.91 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.01 HN 0.94 KP 1.06 ! LA 1.01 MK 0.94 OV 0.92 PT 0.92 ! SC 1.00 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.03 HN 0.94 KP 1.08 ! LA 1.06 MK 1.41 NL 1.20 OV 0.93 ! PT 0.89 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.01 HN 0.88 KP 1.05 ! LA 1.02 MK 0.91 OV 0.93 PT 0.93 ! SC 1.03 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.08 HN 0.89 KP 1.12 ! LA 1.07 MK 1.40 NL 1.19 OV 0.92 ! PT 0.92 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.06 HN 0.88 KP 1.03 ! LA 1.03 MK 0.97 OV 0.95 PT 0.92 ! SC 1.00 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 HN 0.92 KP 1.12 ! LA 1.07 MK 1.41 NL 1.18 OV 0.93 ! PT 0.92 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.04 HN 0.90 KP 1.04 ! LA 1.05 MK 1.01 OV 0.93 PT 0.90 ! SC 1.01 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 0.91 KP 1.14 ! LA 1.07 MK 1.37 NL 1.24 OV 0.93 ! PT 0.92 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.01 HN 0.94 KP 1.02 ! LA 1.01 MK 0.94 OV 0.94 PT 0.95 ! SC 1.02 ! ! ! Fit before self-cal, rms=0.065194Jy sigma=0.580349 ! Fit after self-cal, rms=0.065156Jy sigma=0.537313 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9526 mas, bmaj=1.616 mas, bpa=2.842 degrees ! Estimated noise=0.562897 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000630831 Jy ! Component: 100 - total flux cleaned = -0.00141146 Jy ! Component: 150 - total flux cleaned = -0.00196368 Jy ! Component: 200 - total flux cleaned = -0.00214015 Jy ! Total flux subtracted in 200 components = -0.00214015 Jy ! Clean residual min=-0.004492 max=0.003573 Jy/beam ! Clean residual mean=0.000000 rms=0.000831 Jy/beam ! Combined flux in latest and established models = 0.273432 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 58 components and 0.273432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064971Jy sigma=0.535435 ! Fit after self-cal, rms=0.065006Jy sigma=0.535007 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065006Jy sigma=0.535007 ! Fit after self-cal, rms=0.068199Jy sigma=0.502922 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9562 mas, bmaj=1.616 mas, bpa=2.043 degrees ! Estimated noise=0.565716 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00157459 Jy ! Component: 100 - total flux cleaned = -0.00206391 Jy ! Component: 150 - total flux cleaned = -0.00211585 Jy ! Component: 200 - total flux cleaned = -0.00211672 Jy ! Total flux subtracted in 200 components = -0.00211672 Jy ! Clean residual min=-0.001840 max=0.002128 Jy/beam ! Clean residual mean=0.000000 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.271315 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 72 components and 0.271315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068068Jy sigma=0.501494 ! Fit after self-cal, rms=0.068126Jy sigma=0.501145 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.4, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015231 Jy ! Component: 100 - total flux cleaned = 0.00237379 Jy ! Component: 150 - total flux cleaned = 0.00283262 Jy ! Component: 200 - total flux cleaned = 0.00314379 Jy ! Total flux subtracted in 200 components = 0.00314379 Jy ! Clean residual min=-0.001509 max=0.001528 Jy/beam ! Clean residual mean=0.000001 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.274459 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 89 components and 0.274459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068042Jy sigma=0.500194 ! Fit after self-cal, rms=0.068034Jy sigma=0.500130 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068034Jy sigma=0.500130 ! Fit after self-cal, rms=0.069201Jy sigma=0.499813 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9566 mas, bmaj=1.615 mas, bpa=2.086 degrees ! Estimated noise=0.56579 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000185115 Jy ! Component: 100 - total flux cleaned = 0.000119326 Jy ! Component: 150 - total flux cleaned = 0.000385635 Jy ! Component: 200 - total flux cleaned = 0.000587488 Jy ! Total flux subtracted in 200 components = 0.000587488 Jy ! Clean residual min=-0.001256 max=0.001449 Jy/beam ! Clean residual mean=0.000001 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.275047 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 96 components and 0.275047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069152Jy sigma=0.499296 ! Fit after self-cal, rms=0.069157Jy sigma=0.499261 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.8, 5.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000969543 Jy ! Component: 100 - total flux cleaned = 0.00126398 Jy ! Component: 150 - total flux cleaned = 0.00148917 Jy ! Component: 200 - total flux cleaned = 0.00163302 Jy ! Total flux subtracted in 200 components = 0.00163302 Jy ! Clean residual min=-0.001163 max=0.001224 Jy/beam ! Clean residual mean=0.000001 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.27668 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 109 components and 0.27668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069116Jy sigma=0.498843 ! Fit after self-cal, rms=0.069113Jy sigma=0.498827 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069113Jy sigma=0.498827 ! Fit after self-cal, rms=0.069490Jy sigma=0.498764 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.203 mas, bmaj=2.575 mas, bpa=7.937 degrees ! Estimated noise=0.699436 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000205006 Jy ! Component: 100 - total flux cleaned = 0.000202762 Jy ! Component: 150 - total flux cleaned = 0.00036253 Jy ! Component: 200 - total flux cleaned = 0.000476847 Jy ! Total flux subtracted in 200 components = 0.000476847 Jy ! Clean residual min=-0.001124 max=0.001447 Jy/beam ! Clean residual mean=0.000002 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.277157 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 122 components and 0.277157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069478Jy sigma=0.498597 ! Fit after self-cal, rms=0.069477Jy sigma=0.498554 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.68874e-05 Jy ! Component: 100 - total flux cleaned = 0.000140784 Jy ! Component: 150 - total flux cleaned = 0.000231845 Jy ! Component: 200 - total flux cleaned = 0.000231744 Jy ! Total flux subtracted in 200 components = 0.000231744 Jy ! Clean residual min=-0.001061 max=0.001301 Jy/beam ! Clean residual mean=0.000002 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.277388 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 129 components and 0.277388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069473Jy sigma=0.498504 ! Fit after self-cal, rms=0.069471Jy sigma=0.498494 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9568 mas, bmaj=1.614 mas, bpa=2.097 degrees ! Estimated noise=0.565881 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9568 x 1.614 at 2.097 degrees (North through East) ! Clean map min=-0.001087 max=0.16462 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.731 mas, bmaj=1.348 mas, bpa=-2.843 degrees ! Estimated noise=0.873625 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.12529 Jy ! Component: 100 - total flux cleaned = 0.176441 Jy ! Component: 150 - total flux cleaned = 0.204386 Jy ! Component: 200 - total flux cleaned = 0.22256 Jy ! Total flux subtracted in 200 components = 0.22256 Jy ! Clean residual min=-0.003891 max=0.009825 Jy/beam ! Clean residual mean=0.000002 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.22256 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.22256 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9568 mas, bmaj=1.614 mas, bpa=2.097 degrees ! Estimated noise=0.565881 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.017817 Jy ! Component: 100 - total flux cleaned = 0.0279365 Jy ! Component: 150 - total flux cleaned = 0.0340709 Jy ! Component: 200 - total flux cleaned = 0.0380168 Jy ! Total flux subtracted in 200 components = 0.0380168 Jy ! Clean residual min=-0.001961 max=0.002417 Jy/beam ! Clean residual mean=0.000000 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.260577 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 37 components and 0.260577 Jy ! Inverting map ! Added new window around map position (-2, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0030402 Jy ! Component: 100 - total flux cleaned = 0.00552924 Jy ! Component: 150 - total flux cleaned = 0.00762033 Jy ! Component: 200 - total flux cleaned = 0.00939673 Jy ! Total flux subtracted in 200 components = 0.00939673 Jy ! Clean residual min=-0.001564 max=0.001694 Jy/beam ! Clean residual mean=0.000001 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 0.269973 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 60 components and 0.269973 Jy ! Inverting map ! Added new window around map position (-4.2, 4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172985 Jy ! Component: 100 - total flux cleaned = 0.00310297 Jy ! Component: 150 - total flux cleaned = 0.00419896 Jy ! Component: 200 - total flux cleaned = 0.00500775 Jy ! Total flux subtracted in 200 components = 0.00500775 Jy ! Clean residual min=-0.001426 max=0.001265 Jy/beam ! Clean residual mean=0.000001 rms=0.000295 Jy/beam ! Combined flux in latest and established models = 0.274981 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 76 components and 0.274981 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.203 mas, bmaj=2.575 mas, bpa=7.937 degrees ! Estimated noise=0.699436 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121821 Jy ! Component: 100 - total flux cleaned = 0.00187695 Jy ! Component: 150 - total flux cleaned = 0.00221198 Jy ! Component: 200 - total flux cleaned = 0.00234246 Jy ! Total flux subtracted in 200 components = 0.00234246 Jy ! Clean residual min=-0.001113 max=0.001181 Jy/beam ! Clean residual mean=0.000002 rms=0.000332 Jy/beam ! Combined flux in latest and established models = 0.277324 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.87468e-05 Jy ! Component: 100 - total flux cleaned = 7.42696e-05 Jy ! Component: 150 - total flux cleaned = 0.000121607 Jy ! Component: 200 - total flux cleaned = 0.000150126 Jy ! Total flux subtracted in 200 components = 0.000150126 Jy ! Clean residual min=-0.001083 max=0.001144 Jy/beam ! Clean residual mean=0.000002 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 0.277474 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 117 components and 0.277474 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9568 mas, bmaj=1.614 mas, bpa=2.097 degrees ! Estimated noise=0.565881 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000243521 Jy ! Component: 100 - total flux cleaned = -0.000208935 Jy ! Component: 150 - total flux cleaned = -0.000176244 Jy ! Component: 200 - total flux cleaned = -8.50327e-05 Jy ! Total flux subtracted in 200 components = -8.50327e-05 Jy ! Clean residual min=-0.001205 max=0.001178 Jy/beam ! Clean residual mean=0.000001 rms=0.000280 Jy/beam ! Combined flux in latest and established models = 0.277389 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 127 components and 0.277389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069524Jy sigma=0.498636 ! Fit after self-cal, rms=0.069495Jy sigma=0.498514 wmodel J0443+3441_X_b_map.mod ! Writing 127 model components to file: J0443+3441_X_b_map.mod wobs J0443+3441_X_b_uvs.fits ! Writing UV FITS file: J0443+3441_X_b_uvs.fits wwins J0443+3441_X_b_map.win ! wwins: Wrote 7 windows to J0443+3441_X_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000153827 Jy ! Component: 100 - total flux cleaned = 0.000297247 Jy ! Component: 150 - total flux cleaned = 0.000317389 Jy ! Component: 200 - total flux cleaned = 0.000336592 Jy ! Component: 250 - total flux cleaned = 0.000411821 Jy ! Component: 300 - total flux cleaned = 0.000540391 Jy ! Component: 350 - total flux cleaned = 0.000576287 Jy ! Component: 400 - total flux cleaned = 0.000629469 Jy ! Component: 450 - total flux cleaned = 0.000664511 Jy ! Component: 500 - total flux cleaned = 0.00071624 Jy ! Component: 550 - total flux cleaned = 0.000749985 Jy ! Component: 600 - total flux cleaned = 0.000766747 Jy ! Component: 650 - total flux cleaned = 0.000783445 Jy ! Component: 700 - total flux cleaned = 0.000865341 Jy ! Component: 750 - total flux cleaned = 0.000865318 Jy ! Component: 800 - total flux cleaned = 0.000945245 Jy ! Component: 850 - total flux cleaned = 0.000944974 Jy ! Component: 900 - total flux cleaned = 0.000992018 Jy ! Component: 950 - total flux cleaned = 0.0010386 Jy ! Component: 1000 - total flux cleaned = 0.00105394 Jy ! Component: 1050 - total flux cleaned = 0.00103842 Jy ! Component: 1100 - total flux cleaned = 0.0010687 Jy ! Component: 1150 - total flux cleaned = 0.00109876 Jy ! Component: 1200 - total flux cleaned = 0.00109872 Jy ! Component: 1250 - total flux cleaned = 0.0011135 Jy ! Component: 1300 - total flux cleaned = 0.00109879 Jy ! Component: 1350 - total flux cleaned = 0.00114251 Jy ! Component: 1400 - total flux cleaned = 0.00114256 Jy ! Component: 1450 - total flux cleaned = 0.00119987 Jy ! Component: 1500 - total flux cleaned = 0.00118551 Jy ! Component: 1550 - total flux cleaned = 0.00124195 Jy ! Component: 1600 - total flux cleaned = 0.00122796 Jy ! Component: 1650 - total flux cleaned = 0.00124194 Jy ! Component: 1700 - total flux cleaned = 0.00122788 Jy ! Component: 1750 - total flux cleaned = 0.00128302 Jy ! Component: 1800 - total flux cleaned = 0.00126931 Jy ! Component: 1850 - total flux cleaned = 0.00121466 Jy ! Component: 1900 - total flux cleaned = 0.00130948 Jy ! Component: 1950 - total flux cleaned = 0.00130936 Jy ! Component: 2000 - total flux cleaned = 0.00126921 Jy ! Component: 2050 - total flux cleaned = 0.00130909 Jy ! Component: 2100 - total flux cleaned = 0.00128259 Jy ! Component: 2150 - total flux cleaned = 0.00133533 Jy ! Component: 2200 - total flux cleaned = 0.00130912 Jy ! Component: 2250 - total flux cleaned = 0.00134823 Jy ! Component: 2300 - total flux cleaned = 0.00130934 Jy ! Component: 2350 - total flux cleaned = 0.00130935 Jy ! Component: 2400 - total flux cleaned = 0.00127098 Jy ! Component: 2450 - total flux cleaned = 0.00132201 Jy ! Component: 2500 - total flux cleaned = 0.00133473 Jy ! Component: 2550 - total flux cleaned = 0.00130954 Jy ! Component: 2600 - total flux cleaned = 0.0013598 Jy ! Component: 2650 - total flux cleaned = 0.00133478 Jy ! Component: 2700 - total flux cleaned = 0.00134724 Jy ! Component: 2750 - total flux cleaned = 0.00133476 Jy ! Component: 2800 - total flux cleaned = 0.00135945 Jy ! Component: 2850 - total flux cleaned = 0.00129812 Jy ! Component: 2900 - total flux cleaned = 0.00133471 Jy ! Component: 2950 - total flux cleaned = 0.00133466 Jy ! Component: 3000 - total flux cleaned = 0.00129843 Jy ! Component: 3050 - total flux cleaned = 0.00132253 Jy ! Component: 3100 - total flux cleaned = 0.00129849 Jy ! Component: 3150 - total flux cleaned = 0.00131031 Jy ! Component: 3200 - total flux cleaned = 0.00133409 Jy ! Component: 3250 - total flux cleaned = 0.00131031 Jy ! Component: 3300 - total flux cleaned = 0.00129854 Jy ! Component: 3350 - total flux cleaned = 0.00136892 Jy ! Component: 3400 - total flux cleaned = 0.00133387 Jy ! Component: 3450 - total flux cleaned = 0.00135717 Jy ! Component: 3500 - total flux cleaned = 0.00132237 Jy ! Component: 3550 - total flux cleaned = 0.00136848 Jy ! Component: 3600 - total flux cleaned = 0.00137999 Jy ! Component: 3650 - total flux cleaned = 0.00140287 Jy ! Component: 3700 - total flux cleaned = 0.00140286 Jy ! Component: 3750 - total flux cleaned = 0.00143689 Jy ! Component: 3800 - total flux cleaned = 0.00150475 Jy ! Component: 3850 - total flux cleaned = 0.00154982 Jy ! Component: 3900 - total flux cleaned = 0.00154987 Jy ! Component: 3950 - total flux cleaned = 0.00158342 Jy ! Component: 4000 - total flux cleaned = 0.00156105 Jy ! Component: 4050 - total flux cleaned = 0.00160552 Jy ! Total flux subtracted in 4096 components = 0.00164987 Jy ! Clean residual min=-0.000606 max=0.000586 Jy/beam ! Clean residual mean=0.000000 rms=0.000191 Jy/beam ! Combined flux in latest and established models = 0.279038 Jy keep ! Adding 342 model components to the UV plane model. ! The established model now contains 468 components and 0.279039 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J0443+3441_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9568 x 1.614 at 2.097 degrees (North through East) ! Clean map min=-0.00089901 max=0.16549 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J0443+3441_X_b_map.fits wmodel /image_prod/ug002_uvm//J0443+3441_X_b_map.mod ! Writing 468 model components to file: /image_prod/ug002_uvm//J0443+3441_X_b_map.mod wobs /image_prod/ug002_uvm//J0443+3441_X_b_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J0443+3441_X_b_uvs.fits wwins /image_prod/ug002_uvm//J0443+3441_X_b_map.win ! wwins: Wrote 8 windows to /image_prod/ug002_uvm//J0443+3441_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.165485 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000191047 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.346339 0.346339 0.692678 1.38536 2.77071 5.54142 11.0828 22.1657 44.3314 88.6628 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.165 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 866.203 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J0443+3441_X_b_dfm.log closed on Wed Mar 4 16:39:24 2020