! Started logfile: /image_prod/ug002_uvm//J0432+4500_X_a_dfm.log on Wed Mar 4 16:38:51 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J0432+4500_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J0432+4500_X_a_uvm.fits ! AN table 1: 75 integrations on 36 of 36 possible baselines. ! AN table 2: 112 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.911319 visibilities/baseline/integration-bin. ! Found source: J0432+4500 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 73620 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0432+4500_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 74 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 74 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 74 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 74 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 74 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 74 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 74 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 74 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 74 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 74 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 74 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 74 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.002562Jy sigma=9.972113 ! Fit after self-cal, rms=0.939434Jy sigma=9.318722 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7187 mas, bmaj=1.217 mas, bpa=5.904 degrees ! Estimated noise=0.651992 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0440974 Jy ! Component: 100 - total flux cleaned = 0.061809 Jy ! Total flux subtracted in 100 components = 0.061809 Jy ! Clean residual min=-0.002647 max=0.008276 Jy/beam ! Clean residual mean=0.000005 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.061809 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.061809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055061Jy sigma=0.528193 ! Fit after self-cal, rms=0.054242Jy sigma=0.520334 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105383 Jy ! Component: 100 - total flux cleaned = 0.0162928 Jy ! Total flux subtracted in 100 components = 0.0162928 Jy ! Clean residual min=-0.002137 max=0.002984 Jy/beam ! Clean residual mean=0.000002 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.0781019 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 16 components and 0.0781019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051912Jy sigma=0.494966 ! Fit after self-cal, rms=0.051849Jy sigma=0.494497 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00436988 Jy ! Component: 100 - total flux cleaned = 0.00622643 Jy ! Total flux subtracted in 100 components = 0.00622643 Jy ! Clean residual min=-0.002118 max=0.002438 Jy/beam ! Clean residual mean=0.000000 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.0843283 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 20 components and 0.0843283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051539Jy sigma=0.491540 ! Fit after self-cal, rms=0.051509Jy sigma=0.491323 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.989 mas, bmaj=1.609 mas, bpa=8.12 degrees ! Estimated noise=0.266283 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.4, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000943692 Jy ! Component: 100 - total flux cleaned = 0.00108985 Jy ! Component: 150 - total flux cleaned = 0.00108785 Jy ! Component: 200 - total flux cleaned = 0.00105512 Jy ! Total flux subtracted in 200 components = 0.00105512 Jy ! Clean residual min=-0.001196 max=0.001514 Jy/beam ! Clean residual mean=0.000002 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.0853834 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 29 components and 0.0853834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051420Jy sigma=0.490605 ! Fit after self-cal, rms=0.051404Jy sigma=0.490489 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.989 x 1.609 at 8.12 degrees (North through East) ! Clean map min=-0.0011353 max=0.059478 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.04 HN 0.95 KP 1.01 ! LA 1.00 MK 1.00 OV 0.90 PT 0.90 ! SC 1.09 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.04 KP 1.03 LA 1.03 ! MK 1.10 NL 0.99 OV 1.05 PT 0.97 ! SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 0.92 KP 1.02 ! LA 0.98 MK 1.02 OV 0.90 PT 0.90 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.04 KP 1.03 LA 1.05 ! MK 1.07 NL 0.96 OV 1.00 PT 1.02 ! SC 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.01 HN 0.93 KP 1.03 ! LA 1.02 MK 1.00 OV 0.89 PT 0.90 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.06 KP 1.02 LA 1.04 ! MK 1.14 NL 0.98 OV 1.10 PT 0.97 ! SC 0.86 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 0.94 KP 1.01 ! LA 0.99 MK 0.99 OV 0.93 PT 0.93 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.03 KP 0.99 LA 1.05 ! MK 1.11 NL 0.98 OV 1.05 PT 1.00 ! SC 0.95 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 HN 0.91 KP 1.02 ! LA 1.04 MK 1.03 OV 0.88 PT 0.83 ! SC 1.08 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.10 KP 1.04 LA 1.05 ! MK 1.04 NL 0.94 OV 1.05 PT 1.00 ! SC 0.91 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.92 KP 0.99 ! LA 1.02 MK 1.03 OV 0.88 PT 0.92 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.05 KP 1.06 LA 1.05 ! MK 1.05 NL 0.97 OV 1.07 PT 1.03 ! SC 0.90 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 0.88 KP 1.04 ! LA 1.00 MK 1.01 OV 0.89 PT 0.90 ! SC 1.08 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.09 KP 1.06 LA 1.00 ! MK 1.10 NL 0.98 OV 1.04 PT 0.99 ! SC 0.95 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 0.96 KP 1.01 ! LA 1.03 MK 1.07 OV 0.90 PT 0.91 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.03 KP 1.04 LA 1.06 ! MK 1.13 NL 1.02 OV 1.02 PT 1.01 ! SC 0.86 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 0.90 KP 1.00 ! LA 0.99 MK 1.02 OV 0.92 PT 0.92 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.06 KP 1.05 LA 1.03 ! MK 1.09 NL 0.96 OV 1.04 PT 1.02 ! SC 0.91 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 0.90 KP 0.99 ! LA 1.03 MK 1.07 OV 0.87 PT 0.89 ! SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.02 KP 1.06 LA 1.05 ! MK 1.09 NL 0.90 OV 1.10 PT 0.99 ! SC 0.87 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.96 HN 0.94 KP 1.00 ! LA 1.00 MK 1.09 OV 0.93 PT 0.93 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.06 KP 1.03 LA 1.08 ! MK 0.99 NL 0.93 OV 1.03 PT 1.04 ! SC 0.89 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.03 HN 0.91 KP 1.02 ! LA 1.00 MK 1.09 OV 0.92 PT 0.90 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.08 KP 0.99 LA 1.10 ! MK 1.00 NL 0.93 OV 1.07 PT 1.00 ! SC 0.95 ! ! ! Fit before self-cal, rms=0.051404Jy sigma=0.490489 ! Fit after self-cal, rms=0.050453Jy sigma=0.486742 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9872 mas, bmaj=1.597 mas, bpa=8.338 degrees ! Estimated noise=0.264483 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.2, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000914241 Jy ! Component: 100 - total flux cleaned = 0.00113143 Jy ! Component: 150 - total flux cleaned = 0.00128686 Jy ! Component: 200 - total flux cleaned = 0.00136788 Jy ! Total flux subtracted in 200 components = 0.00136788 Jy ! Clean residual min=-0.000824 max=0.001127 Jy/beam ! Clean residual mean=0.000002 rms=0.000186 Jy/beam ! Combined flux in latest and established models = 0.0867513 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 43 components and 0.0867513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050404Jy sigma=0.486344 ! Fit after self-cal, rms=0.050430Jy sigma=0.486176 ! Inverting map ! Added new window around map position (-3.6, 7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000597889 Jy ! Component: 100 - total flux cleaned = 0.000824408 Jy ! Component: 150 - total flux cleaned = 0.000934327 Jy ! Component: 200 - total flux cleaned = 0.00103275 Jy ! Total flux subtracted in 200 components = 0.00103275 Jy ! Clean residual min=-0.000804 max=0.000854 Jy/beam ! Clean residual mean=0.000001 rms=0.000180 Jy/beam ! Combined flux in latest and established models = 0.087784 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 54 components and 0.0877841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050391Jy sigma=0.485846 ! Fit after self-cal, rms=0.050385Jy sigma=0.485802 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050385Jy sigma=0.485802 ! Fit after self-cal, rms=0.049637Jy sigma=0.484524 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9737 mas, bmaj=1.573 mas, bpa=10.11 degrees ! Estimated noise=0.260552 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000413334 Jy ! Component: 100 - total flux cleaned = 0.000638001 Jy ! Component: 150 - total flux cleaned = 0.000729858 Jy ! Component: 200 - total flux cleaned = 0.000771447 Jy ! Total flux subtracted in 200 components = 0.000771447 Jy ! Clean residual min=-0.000699 max=0.000685 Jy/beam ! Clean residual mean=0.000001 rms=0.000151 Jy/beam ! Combined flux in latest and established models = 0.0885555 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 63 components and 0.0885555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049606Jy sigma=0.484279 ! Fit after self-cal, rms=0.049624Jy sigma=0.484192 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, -17). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000325405 Jy ! Component: 100 - total flux cleaned = 0.000301345 Jy ! Component: 150 - total flux cleaned = 0.000261467 Jy ! Component: 200 - total flux cleaned = 0.000261511 Jy ! Total flux subtracted in 200 components = 0.000261511 Jy ! Clean residual min=-0.000663 max=0.000664 Jy/beam ! Clean residual mean=0.000001 rms=0.000148 Jy/beam ! Combined flux in latest and established models = 0.088817 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 71 components and 0.088817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049602Jy sigma=0.484011 ! Fit after self-cal, rms=0.049597Jy sigma=0.483975 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049597Jy sigma=0.483975 ! Fit after self-cal, rms=0.049227Jy sigma=0.483929 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9656 mas, bmaj=1.565 mas, bpa=10.65 degrees ! Estimated noise=0.258591 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000259329 Jy ! Component: 100 - total flux cleaned = 0.000386086 Jy ! Component: 150 - total flux cleaned = 0.000387294 Jy ! Component: 200 - total flux cleaned = 0.000387551 Jy ! Total flux subtracted in 200 components = 0.000387551 Jy ! Clean residual min=-0.000654 max=0.000620 Jy/beam ! Clean residual mean=0.000001 rms=0.000143 Jy/beam ! Combined flux in latest and established models = 0.0892045 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 80 components and 0.0892045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049208Jy sigma=0.483779 ! Fit after self-cal, rms=0.049208Jy sigma=0.483751 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.46376e-05 Jy ! Component: 100 - total flux cleaned = 3.39611e-05 Jy ! Component: 150 - total flux cleaned = 3.43306e-05 Jy ! Component: 200 - total flux cleaned = 4.93633e-05 Jy ! Total flux subtracted in 200 components = 4.93633e-05 Jy ! Clean residual min=-0.000638 max=0.000604 Jy/beam ! Clean residual mean=0.000001 rms=0.000142 Jy/beam ! Combined flux in latest and established models = 0.0892539 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 85 components and 0.0892539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049195Jy sigma=0.483644 ! Fit after self-cal, rms=0.049194Jy sigma=0.483617 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049194Jy sigma=0.483617 ! Fit after self-cal, rms=0.048929Jy sigma=0.483597 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.331 mas, bmaj=2.61 mas, bpa=22.44 degrees ! Estimated noise=0.32721 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000416509 Jy ! Component: 100 - total flux cleaned = 0.00049477 Jy ! Component: 150 - total flux cleaned = 0.000531841 Jy ! Component: 200 - total flux cleaned = 0.000555577 Jy ! Total flux subtracted in 200 components = 0.000555577 Jy ! Clean residual min=-0.000634 max=0.000632 Jy/beam ! Clean residual mean=0.000002 rms=0.000143 Jy/beam ! Combined flux in latest and established models = 0.0898094 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 104 components and 0.0898095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048924Jy sigma=0.483566 ! Fit after self-cal, rms=0.048926Jy sigma=0.483551 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.03707e-05 Jy ! Component: 100 - total flux cleaned = 7.20736e-05 Jy ! Component: 150 - total flux cleaned = 0.000101876 Jy ! Component: 200 - total flux cleaned = 0.000122031 Jy ! Total flux subtracted in 200 components = 0.000122031 Jy ! Clean residual min=-0.000626 max=0.000637 Jy/beam ! Clean residual mean=0.000002 rms=0.000140 Jy/beam ! Combined flux in latest and established models = 0.0899315 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 116 components and 0.0899315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048924Jy sigma=0.483536 ! Fit after self-cal, rms=0.048924Jy sigma=0.483524 ! Inverting map ! Added new window around map position (-40, 43.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000395209 Jy ! Component: 100 - total flux cleaned = 0.00045917 Jy ! Component: 150 - total flux cleaned = 0.000524638 Jy ! Component: 200 - total flux cleaned = 0.000553748 Jy ! Total flux subtracted in 200 components = 0.000553748 Jy ! Clean residual min=-0.000622 max=0.000496 Jy/beam ! Clean residual mean=0.000002 rms=0.000134 Jy/beam ! Combined flux in latest and established models = 0.0904852 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 135 components and 0.0904852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048919Jy sigma=0.483473 ! Fit after self-cal, rms=0.048919Jy sigma=0.483460 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9599 mas, bmaj=1.559 mas, bpa=11.04 degrees ! Estimated noise=0.257159 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9599 x 1.559 at 11.04 degrees (North through East) ! Clean map min=-0.00060573 max=0.056233 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7074 mas, bmaj=1.191 mas, bpa=9.023 degrees ! Estimated noise=0.609213 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0431928 Jy ! Component: 100 - total flux cleaned = 0.0619643 Jy ! Component: 150 - total flux cleaned = 0.0713228 Jy ! Component: 200 - total flux cleaned = 0.0767937 Jy ! Total flux subtracted in 200 components = 0.0767937 Jy ! Clean residual min=-0.001623 max=0.002811 Jy/beam ! Clean residual mean=0.000002 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.0767937 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0767937 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9599 mas, bmaj=1.559 mas, bpa=11.04 degrees ! Estimated noise=0.257159 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00475937 Jy ! Component: 100 - total flux cleaned = 0.00729437 Jy ! Component: 150 - total flux cleaned = 0.00887663 Jy ! Component: 200 - total flux cleaned = 0.010028 Jy ! Total flux subtracted in 200 components = 0.010028 Jy ! Clean residual min=-0.000743 max=0.000924 Jy/beam ! Clean residual mean=0.000003 rms=0.000170 Jy/beam ! Combined flux in latest and established models = 0.0868217 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 34 components and 0.0868217 Jy ! Inverting map ! Added new window around map position (-2.6, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103085 Jy ! Component: 100 - total flux cleaned = 0.00166545 Jy ! Component: 150 - total flux cleaned = 0.00204987 Jy ! Component: 200 - total flux cleaned = 0.00229132 Jy ! Total flux subtracted in 200 components = 0.00229132 Jy ! Clean residual min=-0.000684 max=0.000705 Jy/beam ! Clean residual mean=0.000002 rms=0.000150 Jy/beam ! Combined flux in latest and established models = 0.089113 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 57 components and 0.089113 Jy ! Inverting map ! Added new window around map position (2.4, -34.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000344999 Jy ! Component: 100 - total flux cleaned = 0.000556636 Jy ! Component: 150 - total flux cleaned = 0.000733314 Jy ! Component: 200 - total flux cleaned = 0.000899736 Jy ! Total flux subtracted in 200 components = 0.000899736 Jy ! Clean residual min=-0.000642 max=0.000652 Jy/beam ! Clean residual mean=0.000001 rms=0.000142 Jy/beam ! Combined flux in latest and established models = 0.0900128 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 76 components and 0.0900128 Jy ! Inverting map ! Added new window around map position (4.4, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.3166e-05 Jy ! Component: 100 - total flux cleaned = 0.000101203 Jy ! Component: 150 - total flux cleaned = 0.000157104 Jy ! Component: 200 - total flux cleaned = 0.000210517 Jy ! Total flux subtracted in 200 components = 0.000210517 Jy ! Clean residual min=-0.000612 max=0.000558 Jy/beam ! Clean residual mean=0.000001 rms=0.000137 Jy/beam ! Combined flux in latest and established models = 0.0902233 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 98 components and 0.0902233 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.331 mas, bmaj=2.61 mas, bpa=22.44 degrees ! Estimated noise=0.32721 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000219141 Jy ! Component: 100 - total flux cleaned = 0.000316973 Jy ! Component: 150 - total flux cleaned = 0.000366328 Jy ! Component: 200 - total flux cleaned = 0.000388583 Jy ! Total flux subtracted in 200 components = 0.000388583 Jy ! Clean residual min=-0.000614 max=0.000495 Jy/beam ! Clean residual mean=0.000003 rms=0.000133 Jy/beam ! Combined flux in latest and established models = 0.0906119 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.2044e-05 Jy ! Component: 100 - total flux cleaned = 7.20218e-05 Jy ! Component: 150 - total flux cleaned = 0.000118991 Jy ! Component: 200 - total flux cleaned = 0.000145966 Jy ! Total flux subtracted in 200 components = 0.000145966 Jy ! Clean residual min=-0.000591 max=0.000477 Jy/beam ! Clean residual mean=0.000003 rms=0.000130 Jy/beam ! Combined flux in latest and established models = 0.0907578 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 144 components and 0.0907578 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9599 mas, bmaj=1.559 mas, bpa=11.04 degrees ! Estimated noise=0.257159 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.79549e-05 Jy ! Component: 100 - total flux cleaned = -9.04155e-05 Jy ! Component: 150 - total flux cleaned = -9.08422e-05 Jy ! Component: 200 - total flux cleaned = -9.10976e-05 Jy ! Total flux subtracted in 200 components = -9.10976e-05 Jy ! Clean residual min=-0.000562 max=0.000545 Jy/beam ! Clean residual mean=0.000001 rms=0.000130 Jy/beam ! Combined flux in latest and established models = 0.0906667 Jy selfcal ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 169 components and 0.0906667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048888Jy sigma=0.483237 ! Fit after self-cal, rms=0.048872Jy sigma=0.483092 wmodel J0432+4500_X_a_map.mod ! Writing 169 model components to file: J0432+4500_X_a_map.mod wobs J0432+4500_X_a_uvs.fits ! Writing UV FITS file: J0432+4500_X_a_uvs.fits wwins J0432+4500_X_a_map.win ! wwins: Wrote 9 windows to J0432+4500_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 9.18276e-05 Jy ! Component: 100 - total flux cleaned = 1.73844e-07 Jy ! Component: 150 - total flux cleaned = -2.89592e-05 Jy ! Component: 200 - total flux cleaned = -2.89752e-05 Jy ! Component: 250 - total flux cleaned = -2.88466e-05 Jy ! Component: 300 - total flux cleaned = -2.86698e-05 Jy ! Component: 350 - total flux cleaned = -2.07135e-06 Jy ! Component: 400 - total flux cleaned = -2.81477e-05 Jy ! Component: 450 - total flux cleaned = 6.20233e-06 Jy ! Component: 500 - total flux cleaned = 1.46755e-05 Jy ! Component: 550 - total flux cleaned = 3.13631e-05 Jy ! Component: 600 - total flux cleaned = 6.4162e-05 Jy ! Component: 650 - total flux cleaned = 9.64315e-05 Jy ! Component: 700 - total flux cleaned = 0.000128112 Jy ! Component: 750 - total flux cleaned = 0.000120123 Jy ! Component: 800 - total flux cleaned = 0.000143457 Jy ! Component: 850 - total flux cleaned = 0.00015887 Jy ! Component: 900 - total flux cleaned = 0.000197087 Jy ! Component: 950 - total flux cleaned = 0.000219708 Jy ! Component: 1000 - total flux cleaned = 0.000257079 Jy ! Component: 1050 - total flux cleaned = 0.000271851 Jy ! Component: 1100 - total flux cleaned = 0.000293979 Jy ! Component: 1150 - total flux cleaned = 0.000301386 Jy ! Component: 1200 - total flux cleaned = 0.000315811 Jy ! Component: 1250 - total flux cleaned = 0.000358644 Jy ! Component: 1300 - total flux cleaned = 0.000365698 Jy ! Component: 1350 - total flux cleaned = 0.000379777 Jy ! Component: 1400 - total flux cleaned = 0.000407666 Jy ! Component: 1450 - total flux cleaned = 0.000421523 Jy ! Component: 1500 - total flux cleaned = 0.000455943 Jy ! Component: 1550 - total flux cleaned = 0.00047634 Jy ! Component: 1600 - total flux cleaned = 0.000455961 Jy ! Component: 1650 - total flux cleaned = 0.000469474 Jy ! Component: 1700 - total flux cleaned = 0.00048281 Jy ! Component: 1750 - total flux cleaned = 0.000496126 Jy ! Component: 1800 - total flux cleaned = 0.000496058 Jy ! Component: 1850 - total flux cleaned = 0.000515752 Jy ! Component: 1900 - total flux cleaned = 0.000522173 Jy ! Component: 1950 - total flux cleaned = 0.000509281 Jy ! Component: 2000 - total flux cleaned = 0.0005157 Jy ! Component: 2050 - total flux cleaned = 0.000522066 Jy ! Component: 2100 - total flux cleaned = 0.000528479 Jy ! Component: 2150 - total flux cleaned = 0.00054743 Jy ! Component: 2200 - total flux cleaned = 0.000541189 Jy ! Component: 2250 - total flux cleaned = 0.000584802 Jy ! Component: 2300 - total flux cleaned = 0.00058484 Jy ! Component: 2350 - total flux cleaned = 0.000578624 Jy ! Component: 2400 - total flux cleaned = 0.000609198 Jy ! Component: 2450 - total flux cleaned = 0.000603175 Jy ! Component: 2500 - total flux cleaned = 0.000603121 Jy ! Component: 2550 - total flux cleaned = 0.000627255 Jy ! Component: 2600 - total flux cleaned = 0.000615265 Jy ! Component: 2650 - total flux cleaned = 0.000645062 Jy ! Component: 2700 - total flux cleaned = 0.000639174 Jy ! Component: 2750 - total flux cleaned = 0.000662829 Jy ! Component: 2800 - total flux cleaned = 0.000668701 Jy ! Component: 2850 - total flux cleaned = 0.00068623 Jy ! Component: 2900 - total flux cleaned = 0.000686265 Jy ! Component: 2950 - total flux cleaned = 0.000703622 Jy ! Component: 3000 - total flux cleaned = 0.000755289 Jy ! Component: 3050 - total flux cleaned = 0.000738139 Jy ! Component: 3100 - total flux cleaned = 0.000732458 Jy ! Component: 3150 - total flux cleaned = 0.000760738 Jy ! Component: 3200 - total flux cleaned = 0.000743914 Jy ! Component: 3250 - total flux cleaned = 0.000760717 Jy ! Component: 3300 - total flux cleaned = 0.000771906 Jy ! Component: 3350 - total flux cleaned = 0.000788556 Jy ! Component: 3400 - total flux cleaned = 0.000788539 Jy ! Component: 3450 - total flux cleaned = 0.000816051 Jy ! Component: 3500 - total flux cleaned = 0.000816081 Jy ! Component: 3550 - total flux cleaned = 0.000832414 Jy ! Component: 3600 - total flux cleaned = 0.000843289 Jy ! Component: 3650 - total flux cleaned = 0.000870278 Jy ! Component: 3700 - total flux cleaned = 0.000870297 Jy ! Component: 3750 - total flux cleaned = 0.000880998 Jy ! Component: 3800 - total flux cleaned = 0.000881013 Jy ! Component: 3850 - total flux cleaned = 0.000907529 Jy ! Component: 3900 - total flux cleaned = 0.000891685 Jy ! Component: 3950 - total flux cleaned = 0.000933759 Jy ! Component: 4000 - total flux cleaned = 0.000933776 Jy ! Component: 4050 - total flux cleaned = 0.000949436 Jy ! Total flux subtracted in 4096 components = 0.00096503 Jy ! Clean residual min=-0.000286 max=0.000260 Jy/beam ! Clean residual mean=0.000000 rms=0.000089 Jy/beam ! Combined flux in latest and established models = 0.0916317 Jy keep ! Adding 325 model components to the UV plane model. ! The established model now contains 493 components and 0.0916317 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J0432+4500_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9599 x 1.559 at 11.04 degrees (North through East) ! Clean map min=-0.00042713 max=0.055865 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J0432+4500_X_a_map.fits wmodel /image_prod/ug002_uvm//J0432+4500_X_a_map.mod ! Writing 493 model components to file: /image_prod/ug002_uvm//J0432+4500_X_a_map.mod wobs /image_prod/ug002_uvm//J0432+4500_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J0432+4500_X_a_uvs.fits wwins /image_prod/ug002_uvm//J0432+4500_X_a_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uvm//J0432+4500_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0558653 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 8.91044e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.478496 0.478496 0.956992 1.91398 3.82797 7.65593 15.3119 30.6237 61.2475 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.055 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 626.964 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J0432+4500_X_a_dfm.log closed on Wed Mar 4 16:38:59 2020