! Started logfile: /image_prod/ug002_uvm//J0429+2724_X_a_dfm.log on Wed Mar 4 16:38:37 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J0429+2724_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J0429+2724_X_a_uvm.fits ! AN table 1: 74 integrations on 45 of 45 possible baselines. ! AN table 2: 18 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.839618 visibilities/baseline/integration-bin. ! Found source: J0429+2724 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 40080 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0429+2724_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 57 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 57 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 57 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 57 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 57 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 57 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 57 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 57 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 57 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 57 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 57 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 57 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.016708Jy sigma=8.813538 ! Fit after self-cal, rms=0.835235Jy sigma=7.229378 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.688 mas, bmaj=1.466 mas, bpa=-1.479 degrees ! Estimated noise=0.684526 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.1246 Jy ! Component: 100 - total flux cleaned = 0.153447 Jy ! Total flux subtracted in 100 components = 0.153447 Jy ! Clean residual min=-0.004880 max=0.011113 Jy/beam ! Clean residual mean=0.000006 rms=0.000815 Jy/beam ! Combined flux in latest and established models = 0.153447 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.153447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071268Jy sigma=0.587001 ! Fit after self-cal, rms=0.071237Jy sigma=0.586696 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120493 Jy ! Component: 100 - total flux cleaned = 0.0187973 Jy ! Total flux subtracted in 100 components = 0.0187973 Jy ! Clean residual min=-0.004247 max=0.007721 Jy/beam ! Clean residual mean=0.000004 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.172244 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 17 components and 0.172244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068314Jy sigma=0.559717 ! Fit after self-cal, rms=0.068329Jy sigma=0.559667 ! Inverting map ! Added new window around map position (-1.4, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00792931 Jy ! Component: 100 - total flux cleaned = 0.0127204 Jy ! Total flux subtracted in 100 components = 0.0127204 Jy ! Clean residual min=-0.003946 max=0.004995 Jy/beam ! Clean residual mean=0.000003 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.184965 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 26 components and 0.184965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066910Jy sigma=0.545821 ! Fit after self-cal, rms=0.066846Jy sigma=0.545085 ! Inverting map ! Added new window around map position (-6, -3.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00535873 Jy ! Component: 100 - total flux cleaned = 0.0092945 Jy ! Total flux subtracted in 100 components = 0.0092945 Jy ! Clean residual min=-0.003831 max=0.003981 Jy/beam ! Clean residual mean=0.000003 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.194259 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 36 components and 0.194259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066114Jy sigma=0.537879 ! Fit after self-cal, rms=0.066094Jy sigma=0.537738 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9232 mas, bmaj=1.802 mas, bpa=-2.634 degrees ! Estimated noise=0.41578 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00679709 Jy ! Component: 100 - total flux cleaned = 0.0116235 Jy ! Component: 150 - total flux cleaned = 0.0154123 Jy ! Component: 200 - total flux cleaned = 0.0186058 Jy ! Total flux subtracted in 200 components = 0.0186058 Jy ! Clean residual min=-0.003681 max=0.005091 Jy/beam ! Clean residual mean=0.000004 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.212865 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 74 components and 0.212865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065185Jy sigma=0.528691 ! Fit after self-cal, rms=0.065139Jy sigma=0.528244 ! Inverting map ! Added new window around map position (1.8, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00451777 Jy ! Component: 100 - total flux cleaned = 0.00755774 Jy ! Component: 150 - total flux cleaned = 0.0101674 Jy ! Component: 200 - total flux cleaned = 0.0124447 Jy ! Total flux subtracted in 200 components = 0.0124447 Jy ! Clean residual min=-0.003224 max=0.002856 Jy/beam ! Clean residual mean=0.000003 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.22531 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 88 components and 0.22531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064697Jy sigma=0.524346 ! Fit after self-cal, rms=0.064670Jy sigma=0.524132 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9232 x 1.802 at -2.634 degrees (North through East) ! Clean map min=-0.0030865 max=0.16489 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.97 HN 0.94 KP 1.07 ! LA 1.02 MK 0.99 NL 1.08 OV 0.99 ! PT 0.88 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.98 HN 1.43 KP 1.05 ! LA 0.95 MK 0.96 NL 1.09 OV 0.99 ! SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.96 HN 0.96 KP 1.05 ! LA 1.01 MK 1.01 NL 1.09 OV 1.00 ! PT 0.88 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.02 HN 1.50 KP 1.04 ! LA 0.96 MK 1.00 NL 1.08 OV 0.99 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.96 HN 0.96 KP 1.05 ! LA 1.02 MK 0.98 NL 1.06 OV 0.98 ! PT 0.90 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.98 HN 1.45 KP 1.02 ! LA 0.99 MK 1.01 NL 1.10 OV 0.98 ! SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.98 HN 0.96 KP 1.04 ! LA 1.04 MK 1.01 NL 1.08 OV 0.99 ! PT 0.90 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.99 HN 1.47 KP 1.06 ! LA 0.96 MK 0.97 NL 1.09 OV 1.00 ! SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 0.97 KP 1.05 ! LA 1.02 MK 1.01 NL 1.07 OV 0.99 ! PT 0.88 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.00 HN 1.37 KP 1.04 ! LA 0.97 MK 1.01 NL 1.10 OV 0.96 ! SC 1.04 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 0.97 KP 1.06 ! LA 1.01 MK 1.01 NL 1.09 OV 0.99 ! PT 0.89 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.01 HN 1.49 KP 1.06 ! LA 0.98 MK 0.99 NL 1.14 OV 0.99 ! SC 1.05 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 0.97 KP 1.05 ! LA 1.01 MK 1.02 NL 1.09 OV 0.99 ! PT 0.87 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.07 HN 1.50 KP 1.08 ! LA 0.96 MK 1.01 NL 1.13 OV 0.96 ! SC 1.05 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.97 HN 0.97 KP 1.07 ! LA 1.03 MK 1.02 NL 1.10 OV 1.00 ! PT 0.89 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.01 HN 1.43 KP 1.07 ! LA 1.00 MK 0.98 NL 1.08 OV 1.00 ! SC 1.04 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.95 HN 0.99 KP 1.06 ! LA 1.04 MK 1.01 NL 1.07 OV 1.01 ! PT 0.89 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.99 HN 1.22 KP 1.05 ! LA 1.02 MK 0.94 NL 1.14 OV 0.97 ! SC 1.03 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.01 HN 1.00 KP 1.05 ! LA 1.01 MK 1.05 NL 1.08 OV 1.02 ! PT 0.91 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.98 HN 1.56 KP 1.08 ! LA 0.99 MK 1.03 NL 1.10 OV 1.01 ! SC 1.04 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 0.97 KP 1.07 ! LA 1.04 MK 1.02 NL 1.09 OV 1.00 ! PT 0.91 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.03 HN 1.54 KP 1.10 ! LA 0.96 MK 0.98 NL 1.12 OV 0.99 ! SC 1.03 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 1.02 KP 1.05 ! LA 1.04 MK 1.01 NL 1.10 OV 1.03 ! PT 0.90 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.99 HN 1.39 KP 1.10 ! LA 0.96 MK 1.05 NL 1.10 OV 1.03 ! SC 1.04 ! ! ! Fit before self-cal, rms=0.064670Jy sigma=0.524132 ! Fit after self-cal, rms=0.064078Jy sigma=0.510109 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9253 mas, bmaj=1.805 mas, bpa=-2.259 degrees ! Estimated noise=0.415232 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000629335 Jy ! Component: 100 - total flux cleaned = -0.000948452 Jy ! Component: 150 - total flux cleaned = -0.000841487 Jy ! Component: 200 - total flux cleaned = -0.000744963 Jy ! Total flux subtracted in 200 components = -0.000744963 Jy ! Clean residual min=-0.002008 max=0.001955 Jy/beam ! Clean residual mean=0.000002 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.224565 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 108 components and 0.224565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063978Jy sigma=0.508985 ! Fit after self-cal, rms=0.063997Jy sigma=0.508846 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063997Jy sigma=0.508846 ! Fit after self-cal, rms=0.064293Jy sigma=0.482780 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9249 mas, bmaj=1.809 mas, bpa=-2.492 degrees ! Estimated noise=0.415361 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000251283 Jy ! Component: 100 - total flux cleaned = -0.000311527 Jy ! Component: 150 - total flux cleaned = -0.000140629 Jy ! Component: 200 - total flux cleaned = -6.94282e-05 Jy ! Total flux subtracted in 200 components = -6.94282e-05 Jy ! Clean residual min=-0.001061 max=0.001210 Jy/beam ! Clean residual mean=-0.000000 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.224495 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 117 components and 0.224495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064209Jy sigma=0.481974 ! Fit after self-cal, rms=0.064281Jy sigma=0.481815 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12.2, -6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000772078 Jy ! Component: 100 - total flux cleaned = 0.00119373 Jy ! Component: 150 - total flux cleaned = 0.00142305 Jy ! Component: 200 - total flux cleaned = 0.00160545 Jy ! Total flux subtracted in 200 components = 0.00160545 Jy ! Clean residual min=-0.001014 max=0.001109 Jy/beam ! Clean residual mean=0.000000 rms=0.000234 Jy/beam ! Combined flux in latest and established models = 0.226101 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 127 components and 0.226101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064248Jy sigma=0.481532 ! Fit after self-cal, rms=0.064245Jy sigma=0.481519 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064245Jy sigma=0.481519 ! Fit after self-cal, rms=0.064365Jy sigma=0.480221 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9244 mas, bmaj=1.81 mas, bpa=-2.444 degrees ! Estimated noise=0.415475 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000665837 Jy ! Component: 100 - total flux cleaned = -0.00076738 Jy ! Component: 150 - total flux cleaned = -0.000632281 Jy ! Component: 200 - total flux cleaned = -0.000460521 Jy ! Total flux subtracted in 200 components = -0.000460521 Jy ! Clean residual min=-0.000874 max=0.000980 Jy/beam ! Clean residual mean=-0.000000 rms=0.000215 Jy/beam ! Combined flux in latest and established models = 0.22564 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 131 components and 0.22564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064335Jy sigma=0.479940 ! Fit after self-cal, rms=0.064337Jy sigma=0.479926 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.2, -2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000647905 Jy ! Component: 100 - total flux cleaned = 0.000823764 Jy ! Component: 150 - total flux cleaned = 0.00100563 Jy ! Component: 200 - total flux cleaned = 0.00110986 Jy ! Total flux subtracted in 200 components = 0.00110986 Jy ! Clean residual min=-0.000865 max=0.000912 Jy/beam ! Clean residual mean=-0.000000 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.22675 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 145 components and 0.22675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064315Jy sigma=0.479748 ! Fit after self-cal, rms=0.064312Jy sigma=0.479737 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064312Jy sigma=0.479737 ! Fit after self-cal, rms=0.064373Jy sigma=0.479669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.121 mas, bmaj=2.726 mas, bpa=-0.5281 degrees ! Estimated noise=0.511042 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000704519 Jy ! Component: 100 - total flux cleaned = -0.000679642 Jy ! Component: 150 - total flux cleaned = -0.000697543 Jy ! Component: 200 - total flux cleaned = -0.00073089 Jy ! Total flux subtracted in 200 components = -0.00073089 Jy ! Clean residual min=-0.000858 max=0.000889 Jy/beam ! Clean residual mean=-0.000000 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.226019 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 161 components and 0.226019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064364Jy sigma=0.479567 ! Fit after self-cal, rms=0.064363Jy sigma=0.479559 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.5365e-05 Jy ! Component: 100 - total flux cleaned = 5.26659e-05 Jy ! Component: 150 - total flux cleaned = 4.00635e-05 Jy ! Component: 200 - total flux cleaned = 2.8721e-05 Jy ! Total flux subtracted in 200 components = 2.8721e-05 Jy ! Clean residual min=-0.000877 max=0.000897 Jy/beam ! Clean residual mean=-0.000000 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.226048 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 176 components and 0.226048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064361Jy sigma=0.479535 ! Fit after self-cal, rms=0.064360Jy sigma=0.479532 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.924 mas, bmaj=1.81 mas, bpa=-2.423 degrees ! Estimated noise=0.415686 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.924 x 1.81 at -2.423 degrees (North through East) ! Clean map min=-0.00075197 max=0.16531 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6904 mas, bmaj=1.476 mas, bpa=-1.41 degrees ! Estimated noise=0.68673 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.124887 Jy ! Component: 100 - total flux cleaned = 0.153485 Jy ! Component: 150 - total flux cleaned = 0.165162 Jy ! Component: 200 - total flux cleaned = 0.172791 Jy ! Total flux subtracted in 200 components = 0.172791 Jy ! Clean residual min=-0.002311 max=0.004328 Jy/beam ! Clean residual mean=0.000002 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.172791 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.172791 Jy ! Inverting map and beam ! Estimated beam: bmin=0.924 mas, bmaj=1.81 mas, bpa=-2.423 degrees ! Estimated noise=0.415686 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00984076 Jy ! Component: 100 - total flux cleaned = 0.0170489 Jy ! Component: 150 - total flux cleaned = 0.0226043 Jy ! Component: 200 - total flux cleaned = 0.0269891 Jy ! Total flux subtracted in 200 components = 0.0269891 Jy ! Clean residual min=-0.001503 max=0.002608 Jy/beam ! Clean residual mean=0.000001 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.19978 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 62 components and 0.19978 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00353582 Jy ! Component: 100 - total flux cleaned = 0.0064446 Jy ! Component: 150 - total flux cleaned = 0.00889892 Jy ! Component: 200 - total flux cleaned = 0.0110007 Jy ! Total flux subtracted in 200 components = 0.0110007 Jy ! Clean residual min=-0.001143 max=0.001371 Jy/beam ! Clean residual mean=0.000000 rms=0.000281 Jy/beam ! Combined flux in latest and established models = 0.210781 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 94 components and 0.210781 Jy ! Inverting map ! Added new window around map position (-2.6, -2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182682 Jy ! Component: 100 - total flux cleaned = 0.00343636 Jy ! Component: 150 - total flux cleaned = 0.0048712 Jy ! Component: 200 - total flux cleaned = 0.00615373 Jy ! Total flux subtracted in 200 components = 0.00615373 Jy ! Clean residual min=-0.000995 max=0.001031 Jy/beam ! Clean residual mean=0.000000 rms=0.000236 Jy/beam ! Combined flux in latest and established models = 0.216934 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 124 components and 0.216934 Jy ! Inverting map ! Added new window around map position (-8.6, -5.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122372 Jy ! Component: 100 - total flux cleaned = 0.00228963 Jy ! Component: 150 - total flux cleaned = 0.0032527 Jy ! Component: 200 - total flux cleaned = 0.00402294 Jy ! Total flux subtracted in 200 components = 0.00402294 Jy ! Clean residual min=-0.000906 max=0.000912 Jy/beam ! Clean residual mean=0.000000 rms=0.000216 Jy/beam ! Combined flux in latest and established models = 0.220957 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 150 components and 0.220957 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.121 mas, bmaj=2.726 mas, bpa=-0.5281 degrees ! Estimated noise=0.511042 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126057 Jy ! Component: 100 - total flux cleaned = 0.00215356 Jy ! Component: 150 - total flux cleaned = 0.00264463 Jy ! Component: 200 - total flux cleaned = 0.00303546 Jy ! Total flux subtracted in 200 components = 0.00303546 Jy ! Clean residual min=-0.000920 max=0.000907 Jy/beam ! Clean residual mean=0.000000 rms=0.000241 Jy/beam ! Combined flux in latest and established models = 0.223993 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000363474 Jy ! Component: 100 - total flux cleaned = 0.000686562 Jy ! Component: 150 - total flux cleaned = 0.000892521 Jy ! Component: 200 - total flux cleaned = 0.00109591 Jy ! Total flux subtracted in 200 components = 0.00109591 Jy ! Clean residual min=-0.000898 max=0.000874 Jy/beam ! Clean residual mean=-0.000000 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.225089 Jy ! Adding 94 model components to the UV plane model. ! The established model now contains 223 components and 0.225089 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.924 mas, bmaj=1.81 mas, bpa=-2.423 degrees ! Estimated noise=0.415686 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000280194 Jy ! Component: 100 - total flux cleaned = 0.00054178 Jy ! Component: 150 - total flux cleaned = 0.000758092 Jy ! Component: 200 - total flux cleaned = 0.000879099 Jy ! Total flux subtracted in 200 components = 0.000879099 Jy ! Clean residual min=-0.000814 max=0.000837 Jy/beam ! Clean residual mean=-0.000000 rms=0.000201 Jy/beam ! Combined flux in latest and established models = 0.225968 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 244 components and 0.225968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064352Jy sigma=0.479450 ! Fit after self-cal, rms=0.064342Jy sigma=0.479404 wmodel J0429+2724_X_a_map.mod ! Writing 244 model components to file: J0429+2724_X_a_map.mod wobs J0429+2724_X_a_uvs.fits ! Writing UV FITS file: J0429+2724_X_a_uvs.fits wwins J0429+2724_X_a_map.win ! wwins: Wrote 9 windows to J0429+2724_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 2.1248e-05 Jy ! Component: 100 - total flux cleaned = -8.13147e-05 Jy ! Component: 150 - total flux cleaned = -0.000138471 Jy ! Component: 200 - total flux cleaned = -0.000152544 Jy ! Component: 250 - total flux cleaned = -0.000138788 Jy ! Component: 300 - total flux cleaned = -7.1675e-05 Jy ! Component: 350 - total flux cleaned = -3.19106e-05 Jy ! Component: 400 - total flux cleaned = 3.35211e-05 Jy ! Component: 450 - total flux cleaned = 8.51754e-05 Jy ! Component: 500 - total flux cleaned = 0.000123371 Jy ! Component: 550 - total flux cleaned = 0.000148655 Jy ! Component: 600 - total flux cleaned = 0.000148757 Jy ! Component: 650 - total flux cleaned = 0.000173771 Jy ! Component: 700 - total flux cleaned = 0.000259654 Jy ! Component: 750 - total flux cleaned = 0.000271727 Jy ! Component: 800 - total flux cleaned = 0.00027182 Jy ! Component: 850 - total flux cleaned = 0.000307758 Jy ! Component: 900 - total flux cleaned = 0.000319688 Jy ! Component: 950 - total flux cleaned = 0.000343352 Jy ! Component: 1000 - total flux cleaned = 0.00037851 Jy ! Component: 1050 - total flux cleaned = 0.000390225 Jy ! Component: 1100 - total flux cleaned = 0.000425137 Jy ! Component: 1150 - total flux cleaned = 0.000436755 Jy ! Component: 1200 - total flux cleaned = 0.000494069 Jy ! Component: 1250 - total flux cleaned = 0.000539695 Jy ! Component: 1300 - total flux cleaned = 0.000562382 Jy ! Component: 1350 - total flux cleaned = 0.00063006 Jy ! Component: 1400 - total flux cleaned = 0.000618796 Jy ! Component: 1450 - total flux cleaned = 0.000585392 Jy ! Component: 1500 - total flux cleaned = 0.000629741 Jy ! Component: 1550 - total flux cleaned = 0.000651778 Jy ! Component: 1600 - total flux cleaned = 0.000684713 Jy ! Component: 1650 - total flux cleaned = 0.000662863 Jy ! Component: 1700 - total flux cleaned = 0.000728148 Jy ! Component: 1750 - total flux cleaned = 0.000738965 Jy ! Component: 1800 - total flux cleaned = 0.000792791 Jy ! Component: 1850 - total flux cleaned = 0.000846498 Jy ! Component: 1900 - total flux cleaned = 0.000825135 Jy ! Component: 1950 - total flux cleaned = 0.000846425 Jy ! Component: 2000 - total flux cleaned = 0.000920538 Jy ! Component: 2050 - total flux cleaned = 0.000973297 Jy ! Component: 2100 - total flux cleaned = 0.000994261 Jy ! Component: 2150 - total flux cleaned = 0.0009942 Jy ! Component: 2200 - total flux cleaned = 0.00104633 Jy ! Component: 2250 - total flux cleaned = 0.00104632 Jy ! Component: 2300 - total flux cleaned = 0.00110836 Jy ! Component: 2350 - total flux cleaned = 0.00111861 Jy ! Component: 2400 - total flux cleaned = 0.00112893 Jy ! Component: 2450 - total flux cleaned = 0.00119032 Jy ! Component: 2500 - total flux cleaned = 0.00124135 Jy ! Component: 2550 - total flux cleaned = 0.00124134 Jy ! Component: 2600 - total flux cleaned = 0.00123118 Jy ! Component: 2650 - total flux cleaned = 0.00123115 Jy ! Component: 2700 - total flux cleaned = 0.00122111 Jy ! Component: 2750 - total flux cleaned = 0.00127123 Jy ! Component: 2800 - total flux cleaned = 0.00129119 Jy ! Component: 2850 - total flux cleaned = 0.0013211 Jy ! Component: 2900 - total flux cleaned = 0.00130121 Jy ! Component: 2950 - total flux cleaned = 0.00136057 Jy ! Component: 3000 - total flux cleaned = 0.00135071 Jy ! Component: 3050 - total flux cleaned = 0.00133106 Jy ! Component: 3100 - total flux cleaned = 0.00137023 Jy ! Component: 3150 - total flux cleaned = 0.00140926 Jy ! Component: 3200 - total flux cleaned = 0.00144821 Jy ! Component: 3250 - total flux cleaned = 0.00149676 Jy ! Component: 3300 - total flux cleaned = 0.00149673 Jy ! Component: 3350 - total flux cleaned = 0.00145808 Jy ! Component: 3400 - total flux cleaned = 0.00146769 Jy ! Component: 3450 - total flux cleaned = 0.00153485 Jy ! Component: 3500 - total flux cleaned = 0.00149653 Jy ! Component: 3550 - total flux cleaned = 0.00155374 Jy ! Component: 3600 - total flux cleaned = 0.00155374 Jy ! Component: 3650 - total flux cleaned = 0.00158221 Jy ! Component: 3700 - total flux cleaned = 0.00159166 Jy ! Component: 3750 - total flux cleaned = 0.00157275 Jy ! Component: 3800 - total flux cleaned = 0.00160102 Jy ! Component: 3850 - total flux cleaned = 0.00163858 Jy ! Component: 3900 - total flux cleaned = 0.00161047 Jy ! Component: 3950 - total flux cleaned = 0.00165715 Jy ! Component: 4000 - total flux cleaned = 0.00163853 Jy ! Component: 4050 - total flux cleaned = 0.00162921 Jy ! Total flux subtracted in 4096 components = 0.00161067 Jy ! Clean residual min=-0.000474 max=0.000525 Jy/beam ! Clean residual mean=-0.000000 rms=0.000164 Jy/beam ! Combined flux in latest and established models = 0.227578 Jy keep ! Adding 370 model components to the UV plane model. ! The established model now contains 614 components and 0.227579 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J0429+2724_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.924 x 1.81 at -2.423 degrees (North through East) ! Clean map min=-0.000703 max=0.16579 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J0429+2724_X_a_map.fits wmodel /image_prod/ug002_uvm//J0429+2724_X_a_map.mod ! Writing 614 model components to file: /image_prod/ug002_uvm//J0429+2724_X_a_map.mod wobs /image_prod/ug002_uvm//J0429+2724_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J0429+2724_X_a_uvs.fits wwins /image_prod/ug002_uvm//J0429+2724_X_a_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uvm//J0429+2724_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.16579 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000163809 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.296417 0.296417 0.592833 1.18567 2.37133 4.74267 9.48533 18.9707 37.9413 75.8827 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.165 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1012.09 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J0429+2724_X_a_dfm.log closed on Wed Mar 4 16:38:44 2020