! Started logfile: /image_prod/ug002_uvm//J0406-3826_X_b_dfm.log on Wed Mar 4 16:37:27 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J0406-3826_X_b_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J0406-3826_X_b_uvm.fits ! AN table 1: 5 integrations on 3 of 3 possible baselines. ! AN table 2: 7 integrations on 6 of 6 possible baselines. ! AN table 3: 8 integrations on 21 of 21 possible baselines. ! AN table 4: 8 integrations on 21 of 21 possible baselines. ! AN table 5: 8 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.908382 visibilities/baseline/integration-bin. ! Found source: J0406-3826 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 108 lines of history. ! ! Reading 5592 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0406-3826_X_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=1.654200Jy sigma=12.456509 ! Fit after self-cal, rms=0.417146Jy sigma=3.047261 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5581 mas, bmaj=1.69 mas, bpa=-1.367 degrees ! Estimated noise=2.01871 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.9302 Jy ! Component: 100 - total flux cleaned = 1.15179 Jy ! Total flux subtracted in 100 components = 1.15179 Jy ! Clean residual min=-0.088645 max=0.165934 Jy/beam ! Clean residual mean=-0.000220 rms=0.017586 Jy/beam ! Combined flux in latest and established models = 1.15179 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 1.15179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.335539Jy sigma=2.421047 ! Fit after self-cal, rms=0.335521Jy sigma=2.421010 ! Inverting map ! Added new window around map position (-1, -4.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.136057 Jy ! Component: 100 - total flux cleaned = 0.192275 Jy ! Total flux subtracted in 100 components = 0.192275 Jy ! Clean residual min=-0.070342 max=0.143668 Jy/beam ! Clean residual mean=-0.000069 rms=0.013967 Jy/beam ! Combined flux in latest and established models = 1.34406 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 12 components and 1.34406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.256937Jy sigma=1.847095 ! Fit after self-cal, rms=0.246778Jy sigma=1.759572 ! Inverting map ! Added new window around map position (1, 4.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0949443 Jy ! Component: 100 - total flux cleaned = 0.12081 Jy ! Total flux subtracted in 100 components = 0.12081 Jy ! Clean residual min=-0.062546 max=0.064305 Jy/beam ! Clean residual mean=0.000024 rms=0.010530 Jy/beam ! Combined flux in latest and established models = 1.46487 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 19 components and 1.46487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.207065Jy sigma=1.465093 ! Fit after self-cal, rms=0.206764Jy sigma=1.462794 ! Inverting map ! Added new window around map position (3.6, -22.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0510466 Jy ! Component: 100 - total flux cleaned = 0.0574588 Jy ! Total flux subtracted in 100 components = 0.0574588 Jy ! Clean residual min=-0.051900 max=0.048872 Jy/beam ! Clean residual mean=0.000075 rms=0.009374 Jy/beam ! Combined flux in latest and established models = 1.52233 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 30 components and 1.52233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.194391Jy sigma=1.375650 ! Fit after self-cal, rms=0.193101Jy sigma=1.364145 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7495 mas, bmaj=2.134 mas, bpa=-1.078 degrees ! Estimated noise=1.3368 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0086174 Jy ! Component: 100 - total flux cleaned = 0.00868544 Jy ! Component: 150 - total flux cleaned = 0.00952063 Jy ! Component: 200 - total flux cleaned = 0.0102616 Jy ! Total flux subtracted in 200 components = 0.0102616 Jy ! Clean residual min=-0.051650 max=0.032192 Jy/beam ! Clean residual mean=0.000564 rms=0.009703 Jy/beam ! Combined flux in latest and established models = 1.53259 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 37 components and 1.53259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.185452Jy sigma=1.309018 ! Fit after self-cal, rms=0.185284Jy sigma=1.308017 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7495 x 2.134 at -1.078 degrees (North through East) ! Clean map min=-0.047855 max=1.1144 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.97 LA 1.16 OV 0.95 PT 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 1.38 LA 1.04 MK 0.98 NL 1.22 ! OV 0.86 PT 0.95 SC 0.99 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.00 KP 1.01 LA 1.01 MK 1.00 ! OV 0.95 PT 0.94 SC 1.00 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.99 KP 1.02 LA 1.07 MK 0.93 ! OV 0.90 PT 1.01 ! ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 LA 1.14 OV 0.96 PT 1.01 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 1.45 LA 1.04 MK 0.96 NL 1.15 ! OV 0.89 PT 0.95 SC 1.03 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.02 KP 0.99 LA 1.02 MK 0.98 ! OV 0.94 PT 0.95 SC 1.00 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.98 KP 1.00 LA 1.08 MK 0.96 ! OV 0.89 PT 1.00 ! ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.96 LA 1.17 OV 0.95 PT 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 1.44 LA 1.06 MK 0.99 NL 1.19 ! OV 0.89 PT 0.95 SC 1.00 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.02 KP 0.98 LA 1.02 MK 1.02 ! OV 0.93 PT 0.92 SC 1.01 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.99 KP 1.01 LA 1.07 MK 0.96 ! OV 0.91 PT 1.02 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 LA 1.15 OV 0.96 PT 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 1.40 LA 1.04 MK 0.99 NL 1.18 ! OV 0.91 PT 0.96 SC 1.00 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.01 KP 1.00 LA 1.02 MK 0.99 ! OV 0.92 PT 0.94 SC 1.01 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.98 KP 1.01 LA 1.09 MK 0.96 ! OV 0.88 PT 1.00 ! ! ! Correcting IF 5. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.92 LA 1.13 OV 0.96 PT 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 1.42 LA 1.02 MK 0.99 NL 1.19 ! OV 0.90 PT 0.97 SC 1.00 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.01 KP 1.00 LA 0.99 MK 0.99 ! OV 0.93 PT 0.95 SC 1.00 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.98 KP 1.02 LA 1.06 MK 0.94 ! OV 0.91 PT 1.01 ! ! ! Correcting IF 6. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 LA 1.14 OV 0.98 PT 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 1.36 LA 1.05 MK 1.00 NL 1.16 ! OV 0.90 PT 0.99 SC 1.02 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.02 KP 0.98 LA 1.01 MK 0.98 ! OV 0.93 PT 0.94 SC 1.00 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.00 KP 1.01 LA 1.07 MK 0.97 ! OV 0.89 PT 1.02 ! ! ! Correcting IF 7. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.92 LA 1.15 OV 0.99 PT 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 1.42 LA 1.03 MK 1.04 NL 1.18 ! OV 0.90 PT 0.96 SC 1.01 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.01 KP 1.02 LA 1.01 MK 0.98 ! OV 0.94 PT 0.94 SC 1.00 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.98 KP 1.01 LA 1.07 MK 0.98 ! OV 0.90 PT 1.02 ! ! ! Correcting IF 8. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.96 LA 1.13 OV 0.97 PT 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 1.42 LA 1.04 MK 1.05 NL 1.21 ! OV 0.88 PT 0.97 SC 1.06 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.02 KP 1.00 LA 1.00 MK 0.96 ! OV 0.91 PT 0.94 SC 1.05 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.98 KP 1.01 LA 1.06 MK 1.00 ! OV 0.90 PT 1.01 ! ! ! Correcting IF 9. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.96 LA 1.12 OV 0.96 PT 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 1.49 LA 1.03 MK 1.11 NL 1.18 ! OV 0.89 PT 0.96 SC 0.99 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.02 KP 0.99 LA 0.99 MK 0.96 ! OV 0.93 PT 0.96 SC 1.04 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.96 KP 1.01 LA 1.09 MK 0.97 ! OV 0.91 PT 1.02 ! ! ! Correcting IF 10. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 LA 1.15 OV 0.99 PT 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 1.38 LA 1.02 MK 1.06 NL 1.21 ! OV 0.91 PT 0.98 SC 1.04 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.01 KP 1.00 LA 1.01 MK 0.95 ! OV 0.93 PT 0.94 SC 1.01 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.98 KP 0.98 LA 1.07 MK 0.99 ! OV 0.91 PT 1.02 ! ! ! Correcting IF 11. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.94 LA 1.15 OV 0.97 PT 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 1.48 LA 1.04 MK 1.05 NL 1.11 ! OV 0.89 PT 0.99 SC 1.04 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.02 KP 0.99 LA 0.99 MK 0.94 ! OV 0.92 PT 0.96 SC 1.02 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.96 KP 0.98 LA 1.10 MK 0.97 ! OV 0.90 PT 1.03 ! ! ! Correcting IF 12. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 LA 1.12 OV 1.00 PT 1.01 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 1.39 LA 1.02 MK 1.06 NL 1.17 ! OV 0.89 PT 0.97 SC 1.06 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.01 KP 0.98 LA 1.01 MK 0.97 ! OV 0.93 PT 0.93 SC 1.01 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.97 KP 0.99 LA 1.08 MK 0.95 ! OV 0.90 PT 1.02 ! ! ! Fit before self-cal, rms=0.185284Jy sigma=1.308017 ! Fit after self-cal, rms=0.135332Jy sigma=0.752815 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7581 mas, bmaj=2.12 mas, bpa=-0.11 degrees ! Estimated noise=1.39836 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.4, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0148531 Jy ! Component: 100 - total flux cleaned = 0.0148867 Jy ! Component: 150 - total flux cleaned = 0.0155208 Jy ! Component: 200 - total flux cleaned = 0.0155155 Jy ! Total flux subtracted in 200 components = 0.0155155 Jy ! Clean residual min=-0.022822 max=0.016262 Jy/beam ! Clean residual mean=-0.000114 rms=0.004168 Jy/beam ! Combined flux in latest and established models = 1.54811 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 52 components and 1.54811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.125341Jy sigma=0.682867 ! Fit after self-cal, rms=0.125220Jy sigma=0.677128 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.125220Jy sigma=0.677128 ! Fit after self-cal, rms=0.124063Jy sigma=0.668970 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7586 mas, bmaj=2.119 mas, bpa=-0.05111 degrees ! Estimated noise=1.39348 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00275017 Jy ! Component: 100 - total flux cleaned = -0.00227671 Jy ! Component: 150 - total flux cleaned = -0.00270153 Jy ! Component: 200 - total flux cleaned = -0.00231145 Jy ! Total flux subtracted in 200 components = -0.00231145 Jy ! Clean residual min=-0.018469 max=0.013781 Jy/beam ! Clean residual mean=-0.000150 rms=0.003564 Jy/beam ! Combined flux in latest and established models = 1.5458 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 61 components and 1.5458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.118883Jy sigma=0.637272 ! Fit after self-cal, rms=0.118706Jy sigma=0.634312 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163617 Jy ! Component: 100 - total flux cleaned = 0.00238147 Jy ! Component: 150 - total flux cleaned = 0.00271119 Jy ! Component: 200 - total flux cleaned = 0.00271551 Jy ! Total flux subtracted in 200 components = 0.00271551 Jy ! Clean residual min=-0.016389 max=0.013436 Jy/beam ! Clean residual mean=-0.000134 rms=0.003367 Jy/beam ! Combined flux in latest and established models = 1.54851 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 65 components and 1.54851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.116108Jy sigma=0.619140 ! Fit after self-cal, rms=0.116020Jy sigma=0.617644 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.116020Jy sigma=0.617644 ! Fit after self-cal, rms=0.114735Jy sigma=0.610121 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7589 mas, bmaj=2.118 mas, bpa=0.009741 degrees ! Estimated noise=1.39084 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00671199 Jy ! Component: 100 - total flux cleaned = -0.00636499 Jy ! Component: 150 - total flux cleaned = -0.00606419 Jy ! Component: 200 - total flux cleaned = -0.00607054 Jy ! Total flux subtracted in 200 components = -0.00607054 Jy ! Clean residual min=-0.014863 max=0.011600 Jy/beam ! Clean residual mean=-0.000145 rms=0.002927 Jy/beam ! Combined flux in latest and established models = 1.54244 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 71 components and 1.54244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112013Jy sigma=0.594096 ! Fit after self-cal, rms=0.111987Jy sigma=0.593024 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000454455 Jy ! Component: 100 - total flux cleaned = 0.000995365 Jy ! Component: 150 - total flux cleaned = 0.00123954 Jy ! Component: 200 - total flux cleaned = 0.00145981 Jy ! Total flux subtracted in 200 components = 0.00145981 Jy ! Clean residual min=-0.013534 max=0.011384 Jy/beam ! Clean residual mean=-0.000137 rms=0.002822 Jy/beam ! Combined flux in latest and established models = 1.5439 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 82 components and 1.5439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.110523Jy sigma=0.584911 ! Fit after self-cal, rms=0.110486Jy sigma=0.584126 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.110486Jy sigma=0.584126 ! Fit after self-cal, rms=0.109687Jy sigma=0.579729 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.5 mas, bmaj=7.577 mas, bpa=9.835 degrees ! Estimated noise=1.88791 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00437389 Jy ! Component: 100 - total flux cleaned = -0.00473721 Jy ! Component: 150 - total flux cleaned = -0.00459901 Jy ! Component: 200 - total flux cleaned = -0.00446479 Jy ! Total flux subtracted in 200 components = -0.00446479 Jy ! Clean residual min=-0.013067 max=0.012101 Jy/beam ! Clean residual mean=-0.000259 rms=0.003406 Jy/beam ! Combined flux in latest and established models = 1.53944 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 86 components and 1.53944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.108636Jy sigma=0.575842 ! Fit after self-cal, rms=0.108601Jy sigma=0.574808 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000254831 Jy ! Component: 100 - total flux cleaned = 0.000127084 Jy ! Component: 150 - total flux cleaned = 7.67148e-06 Jy ! Component: 200 - total flux cleaned = -0.000109296 Jy ! Total flux subtracted in 200 components = -0.000109296 Jy ! Clean residual min=-0.013381 max=0.011963 Jy/beam ! Clean residual mean=-0.000260 rms=0.003389 Jy/beam ! Combined flux in latest and established models = 1.53933 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 90 components and 1.53933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.108070Jy sigma=0.573429 ! Fit after self-cal, rms=0.108064Jy sigma=0.573082 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7593 mas, bmaj=2.117 mas, bpa=0.04759 degrees ! Estimated noise=1.38874 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7593 x 2.117 at 0.04759 degrees (North through East) ! Clean map min=-0.01218 max=1.1556 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.108064Jy sigma=0.573082 ! Fit after self-cal, rms=0.100654Jy sigma=0.517799 ! Inverting map and beam ! Estimated beam: bmin=0.7595 mas, bmaj=2.116 mas, bpa=0.09784 degrees ! Estimated noise=1.3863 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00663191 Jy ! Component: 100 - total flux cleaned = -0.00737892 Jy ! Component: 150 - total flux cleaned = -0.00782433 Jy ! Component: 200 - total flux cleaned = -0.00802567 Jy ! Total flux subtracted in 200 components = -0.00802567 Jy ! Clean residual min=-0.011767 max=0.009899 Jy/beam ! Clean residual mean=-0.000138 rms=0.002372 Jy/beam ! Combined flux in latest and established models = 1.5313 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 97 components and 1.5313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099058Jy sigma=0.508294 ! Fit after self-cal, rms=0.099043Jy sigma=0.507927 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000503096 Jy ! Component: 100 - total flux cleaned = 0.000315132 Jy ! Component: 150 - total flux cleaned = 0.000316578 Jy ! Component: 200 - total flux cleaned = 0.000314332 Jy ! Total flux subtracted in 200 components = 0.000314332 Jy ! Clean residual min=-0.010885 max=0.009656 Jy/beam ! Clean residual mean=-0.000136 rms=0.002311 Jy/beam ! Combined flux in latest and established models = 1.53162 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 103 components and 1.53162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098206Jy sigma=0.502895 ! Fit after self-cal, rms=0.098191Jy sigma=0.502566 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098191Jy sigma=0.502566 ! Fit after self-cal, rms=0.097889Jy sigma=0.499959 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5613 mas, bmaj=1.655 mas, bpa=-0.3035 degrees ! Estimated noise=2.12307 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.958446 Jy ! Component: 100 - total flux cleaned = 1.18207 Jy ! Component: 150 - total flux cleaned = 1.27673 Jy ! Component: 200 - total flux cleaned = 1.33561 Jy ! Total flux subtracted in 200 components = 1.33561 Jy ! Clean residual min=-0.023571 max=0.050805 Jy/beam ! Clean residual mean=-0.000167 rms=0.005366 Jy/beam ! Combined flux in latest and established models = 1.33561 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 1.33561 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7598 mas, bmaj=2.115 mas, bpa=0.1357 degrees ! Estimated noise=1.38511 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.2, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0668962 Jy ! Component: 100 - total flux cleaned = 0.102932 Jy ! Component: 150 - total flux cleaned = 0.127271 Jy ! Component: 200 - total flux cleaned = 0.144995 Jy ! Total flux subtracted in 200 components = 0.144995 Jy ! Clean residual min=-0.011968 max=0.017615 Jy/beam ! Clean residual mean=-0.000373 rms=0.003171 Jy/beam ! Combined flux in latest and established models = 1.4806 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 50 components and 1.4806 Jy ! Inverting map ! Added new window around map position (1.8, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0174194 Jy ! Component: 100 - total flux cleaned = 0.0284884 Jy ! Component: 150 - total flux cleaned = 0.0344526 Jy ! Component: 200 - total flux cleaned = 0.0364219 Jy ! Total flux subtracted in 200 components = 0.0364219 Jy ! Clean residual min=-0.010226 max=0.010550 Jy/beam ! Clean residual mean=-0.000168 rms=0.002385 Jy/beam ! Combined flux in latest and established models = 1.51703 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 77 components and 1.51703 Jy ! Inverting map ! Added new window around map position (4.2, 14.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00807285 Jy ! Component: 100 - total flux cleaned = 0.00993848 Jy ! Component: 150 - total flux cleaned = 0.0108994 Jy ! Component: 200 - total flux cleaned = 0.0117899 Jy ! Total flux subtracted in 200 components = 0.0117899 Jy ! Clean residual min=-0.009484 max=0.009390 Jy/beam ! Clean residual mean=-0.000104 rms=0.002117 Jy/beam ! Combined flux in latest and established models = 1.52882 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 89 components and 1.52882 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.506 mas, bmaj=7.599 mas, bpa=9.848 degrees ! Estimated noise=1.87982 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00226486 Jy ! Component: 100 - total flux cleaned = 0.00245824 Jy ! Component: 150 - total flux cleaned = 0.00262159 Jy ! Component: 200 - total flux cleaned = 0.00275931 Jy ! Total flux subtracted in 200 components = 0.00275931 Jy ! Clean residual min=-0.011168 max=0.011316 Jy/beam ! Clean residual mean=-0.000193 rms=0.002903 Jy/beam ! Combined flux in latest and established models = 1.53158 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.7465e-06 Jy ! Component: 100 - total flux cleaned = 0.000239415 Jy ! Component: 150 - total flux cleaned = 0.000584117 Jy ! Component: 200 - total flux cleaned = 0.00069408 Jy ! Total flux subtracted in 200 components = 0.00069408 Jy ! Clean residual min=-0.011041 max=0.011486 Jy/beam ! Clean residual mean=-0.000185 rms=0.002865 Jy/beam ! Combined flux in latest and established models = 1.53227 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 99 components and 1.53227 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7598 mas, bmaj=2.115 mas, bpa=0.1357 degrees ! Estimated noise=1.38511 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101921 Jy ! Component: 100 - total flux cleaned = 0.00102747 Jy ! Component: 150 - total flux cleaned = 0.00102996 Jy ! Component: 200 - total flux cleaned = 0.000867033 Jy ! Total flux subtracted in 200 components = 0.000867033 Jy ! Clean residual min=-0.010427 max=0.008927 Jy/beam ! Clean residual mean=-0.000079 rms=0.001999 Jy/beam ! Combined flux in latest and established models = 1.53314 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 111 components and 1.53314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095333Jy sigma=0.487690 ! Fit after self-cal, rms=0.095163Jy sigma=0.484007 wmodel J0406-3826_X_b_map.mod ! Writing 111 model components to file: J0406-3826_X_b_map.mod wobs J0406-3826_X_b_uvs.fits ! Writing UV FITS file: J0406-3826_X_b_uvs.fits wwins J0406-3826_X_b_map.win ! wwins: Wrote 8 windows to J0406-3826_X_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00238456 Jy ! Component: 100 - total flux cleaned = -0.00294082 Jy ! Component: 150 - total flux cleaned = -0.00333158 Jy ! Component: 200 - total flux cleaned = -0.00357916 Jy ! Component: 250 - total flux cleaned = -0.00415741 Jy ! Component: 300 - total flux cleaned = -0.00460385 Jy ! Component: 350 - total flux cleaned = -0.00546409 Jy ! Component: 400 - total flux cleaned = -0.00588094 Jy ! Component: 450 - total flux cleaned = -0.00658859 Jy ! Component: 500 - total flux cleaned = -0.00707978 Jy ! Component: 550 - total flux cleaned = -0.00765294 Jy ! Component: 600 - total flux cleaned = -0.00811873 Jy ! Component: 650 - total flux cleaned = -0.00848559 Jy ! Component: 700 - total flux cleaned = -0.00884251 Jy ! Component: 750 - total flux cleaned = -0.00919128 Jy ! Component: 800 - total flux cleaned = -0.0096161 Jy ! Component: 850 - total flux cleaned = -0.0096985 Jy ! Component: 900 - total flux cleaned = -0.010188 Jy ! Component: 950 - total flux cleaned = -0.0104254 Jy ! Component: 1000 - total flux cleaned = -0.0105813 Jy ! Component: 1050 - total flux cleaned = -0.0108876 Jy ! Component: 1100 - total flux cleaned = -0.0111877 Jy ! Component: 1150 - total flux cleaned = -0.0114096 Jy ! Component: 1200 - total flux cleaned = -0.0116271 Jy ! Component: 1250 - total flux cleaned = -0.0118408 Jy ! Component: 1300 - total flux cleaned = -0.0118425 Jy ! Component: 1350 - total flux cleaned = -0.0121179 Jy ! Component: 1400 - total flux cleaned = -0.0122517 Jy ! Component: 1450 - total flux cleaned = -0.0121184 Jy ! Component: 1500 - total flux cleaned = -0.0124483 Jy ! Component: 1550 - total flux cleaned = -0.0125784 Jy ! Component: 1600 - total flux cleaned = -0.012834 Jy ! Component: 1650 - total flux cleaned = -0.0130224 Jy ! Component: 1700 - total flux cleaned = -0.0131444 Jy ! Component: 1750 - total flux cleaned = -0.0133274 Jy ! Component: 1800 - total flux cleaned = -0.0136287 Jy ! Component: 1850 - total flux cleaned = -0.0138073 Jy ! Component: 1900 - total flux cleaned = -0.0141588 Jy ! Component: 1950 - total flux cleaned = -0.0142164 Jy ! Component: 2000 - total flux cleaned = -0.0146169 Jy ! Component: 2050 - total flux cleaned = -0.0149558 Jy ! Component: 2100 - total flux cleaned = -0.0152346 Jy ! Component: 2150 - total flux cleaned = -0.01562 Jy ! Component: 2200 - total flux cleaned = -0.0158383 Jy ! Component: 2250 - total flux cleaned = -0.0161081 Jy ! Component: 2300 - total flux cleaned = -0.016534 Jy ! Component: 2350 - total flux cleaned = -0.0168496 Jy ! Component: 2400 - total flux cleaned = -0.0171616 Jy ! Component: 2450 - total flux cleaned = -0.0173673 Jy ! Component: 2500 - total flux cleaned = -0.0175717 Jy ! Component: 2550 - total flux cleaned = -0.0176726 Jy ! Component: 2600 - total flux cleaned = -0.0179722 Jy ! Component: 2650 - total flux cleaned = -0.0181205 Jy ! Component: 2700 - total flux cleaned = -0.0182669 Jy ! Component: 2750 - total flux cleaned = -0.0185084 Jy ! Component: 2800 - total flux cleaned = -0.0186514 Jy ! Component: 2850 - total flux cleaned = -0.0188406 Jy ! Component: 2900 - total flux cleaned = -0.0189342 Jy ! Component: 2950 - total flux cleaned = -0.0189343 Jy ! Component: 3000 - total flux cleaned = -0.0191647 Jy ! Component: 3050 - total flux cleaned = -0.0193475 Jy ! Component: 3100 - total flux cleaned = -0.0194381 Jy ! Component: 3150 - total flux cleaned = -0.0195725 Jy ! Component: 3200 - total flux cleaned = -0.0198391 Jy ! Component: 3250 - total flux cleaned = -0.0201034 Jy ! Component: 3300 - total flux cleaned = -0.0201472 Jy ! Component: 3350 - total flux cleaned = -0.0204064 Jy ! Component: 3400 - total flux cleaned = -0.0205781 Jy ! Component: 3450 - total flux cleaned = -0.0206627 Jy ! Component: 3500 - total flux cleaned = -0.0207894 Jy ! Component: 3550 - total flux cleaned = -0.0209149 Jy ! Component: 3600 - total flux cleaned = -0.0210394 Jy ! Component: 3650 - total flux cleaned = -0.0211623 Jy ! Component: 3700 - total flux cleaned = -0.0214073 Jy ! Component: 3750 - total flux cleaned = -0.0214885 Jy ! Component: 3800 - total flux cleaned = -0.0216087 Jy ! Component: 3850 - total flux cleaned = -0.0217682 Jy ! Component: 3900 - total flux cleaned = -0.0218074 Jy ! Component: 3950 - total flux cleaned = -0.0219646 Jy ! Component: 4000 - total flux cleaned = -0.0220426 Jy ! Component: 4050 - total flux cleaned = -0.0222362 Jy ! Total flux subtracted in 4096 components = -0.02239 Jy ! Clean residual min=-0.001927 max=0.001972 Jy/beam ! Clean residual mean=-0.000056 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 1.51075 Jy keep ! Adding 348 model components to the UV plane model. ! The established model now contains 459 components and 1.51075 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J0406-3826_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7598 x 2.115 at 0.1357 degrees (North through East) ! Clean map min=-0.0060721 max=1.1572 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J0406-3826_X_b_map.fits wmodel /image_prod/ug002_uvm//J0406-3826_X_b_map.mod ! Writing 459 model components to file: /image_prod/ug002_uvm//J0406-3826_X_b_map.mod wobs /image_prod/ug002_uvm//J0406-3826_X_b_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J0406-3826_X_b_uvs.fits wwins /image_prod/ug002_uvm//J0406-3826_X_b_map.win ! wwins: Wrote 9 windows to /image_prod/ug002_uvm//J0406-3826_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.1572 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000777218 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.201491 0.201491 0.402981 0.805963 1.61193 3.22385 6.4477 12.8954 25.7908 51.5816 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.157 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1488.9 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J0406-3826_X_b_dfm.log closed on Wed Mar 4 16:37:32 2020