! Started logfile: /image_prod/ug002_uvm//J0348-2749_X_b_dfm.log on Wed Mar 4 16:36:18 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J0348-2749_X_b_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J0348-2749_X_b_uvm.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! AN table 2: 8 integrations on 21 of 21 possible baselines. ! AN table 3: 24 integrations on 36 of 36 possible baselines. ! AN table 4: 9 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.82141 visibilities/baseline/integration-bin. ! Found source: J0348-2749 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 18600 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0348-2749_X_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 27 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 27 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 27 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 27 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 27 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 27 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 27 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 27 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 9. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 27 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 10. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 27 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 11. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 27 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 12. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 27 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.088098Jy sigma=8.828342 ! Fit after self-cal, rms=0.606394Jy sigma=4.857276 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.641 mas, bmaj=1.888 mas, bpa=4.093 degrees ! Estimated noise=1.16491 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.299765 Jy ! Component: 100 - total flux cleaned = 0.370871 Jy ! Total flux subtracted in 100 components = 0.370871 Jy ! Clean residual min=-0.016473 max=0.028152 Jy/beam ! Clean residual mean=-0.000090 rms=0.003432 Jy/beam ! Combined flux in latest and established models = 0.370871 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.370871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.130854Jy sigma=1.046862 ! Fit after self-cal, rms=0.130844Jy sigma=1.046766 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0314209 Jy ! Component: 100 - total flux cleaned = 0.0496604 Jy ! Total flux subtracted in 100 components = 0.0496604 Jy ! Clean residual min=-0.014516 max=0.022570 Jy/beam ! Clean residual mean=-0.000059 rms=0.003011 Jy/beam ! Combined flux in latest and established models = 0.420531 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 11 components and 0.420531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.119126Jy sigma=0.937391 ! Fit after self-cal, rms=0.119109Jy sigma=0.937279 ! Inverting map ! Added new window around map position (1.8, 3.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0211478 Jy ! Component: 100 - total flux cleaned = 0.0274795 Jy ! Total flux subtracted in 100 components = 0.0274795 Jy ! Clean residual min=-0.014011 max=0.022096 Jy/beam ! Clean residual mean=-0.000046 rms=0.002823 Jy/beam ! Combined flux in latest and established models = 0.448011 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 20 components and 0.448011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.113825Jy sigma=0.896701 ! Fit after self-cal, rms=0.113244Jy sigma=0.891378 ! Inverting map ! Added new window around map position (-1.6, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0181151 Jy ! Component: 100 - total flux cleaned = 0.0260351 Jy ! Total flux subtracted in 100 components = 0.0260351 Jy ! Clean residual min=-0.012582 max=0.017543 Jy/beam ! Clean residual mean=-0.000032 rms=0.002621 Jy/beam ! Combined flux in latest and established models = 0.474046 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 30 components and 0.474046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.109202Jy sigma=0.863221 ! Fit after self-cal, rms=0.108929Jy sigma=0.860401 ! Inverting map ! Added new window around map position (2.2, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153941 Jy ! Component: 100 - total flux cleaned = 0.0244091 Jy ! Total flux subtracted in 100 components = 0.0244091 Jy ! Clean residual min=-0.012238 max=0.013245 Jy/beam ! Clean residual mean=-0.000019 rms=0.002478 Jy/beam ! Combined flux in latest and established models = 0.498455 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 36 components and 0.498455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105609Jy sigma=0.834660 ! Fit after self-cal, rms=0.105543Jy sigma=0.834188 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8716 mas, bmaj=2.541 mas, bpa=3.494 degrees ! Estimated noise=0.670744 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.4, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0154732 Jy ! Component: 100 - total flux cleaned = 0.0215327 Jy ! Component: 150 - total flux cleaned = 0.0242455 Jy ! Component: 200 - total flux cleaned = 0.0253974 Jy ! Total flux subtracted in 200 components = 0.0253974 Jy ! Clean residual min=-0.010845 max=0.012318 Jy/beam ! Clean residual mean=-0.000010 rms=0.002523 Jy/beam ! Combined flux in latest and established models = 0.523853 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 55 components and 0.523853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.102691Jy sigma=0.814573 ! Fit after self-cal, rms=0.102464Jy sigma=0.812937 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8716 x 2.541 at 3.494 degrees (North through East) ! Clean map min=-0.010512 max=0.38568 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.96 HN 1.45 KP 1.22 ! LA 1.07 MK 0.98 NL 1.28 OV 0.95 ! PT 0.95 SC 0.93 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 HN 0.92 LA 1.01 NL 1.04 ! OV 0.85 PT 0.91 SC 1.85 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.98 HN 0.93 KP 1.02 ! LA 1.01 MK 1.07 OV 0.90 PT 0.95 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.03 KP 1.00 LA 1.02 NL 0.88 ! PT 0.96 SC 0.88 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.93 HN 1.45 KP 1.20 ! LA 1.08 MK 0.94 NL 1.29 OV 0.95 ! PT 0.96 SC 0.94 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 HN 0.92 LA 1.01 NL 1.05 ! OV 0.85 PT 0.89 SC 1.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.99 HN 0.94 KP 1.01 ! LA 1.02 MK 1.07 OV 0.90 PT 0.95 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.02 KP 1.02 LA 1.03 NL 0.88 ! PT 0.98 SC 0.81 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.93 HN 1.46 KP 1.20 ! LA 1.09 MK 0.93 NL 1.29 OV 0.97 ! PT 0.99 SC 0.92 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 HN 0.87 LA 1.00 NL 1.08 ! OV 0.87 PT 0.95 SC 1.75 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.01 HN 0.93 KP 1.02 ! LA 1.00 MK 1.08 OV 0.91 PT 0.95 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.02 KP 0.96 LA 1.02 NL 0.91 ! PT 1.00 SC 0.86 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.95 HN 1.47 KP 1.22 ! LA 1.06 MK 0.94 NL 1.26 OV 0.97 ! PT 0.98 SC 0.90 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 HN 0.89 LA 1.01 NL 1.05 ! OV 0.86 PT 0.96 SC 1.66 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.99 HN 0.96 KP 1.00 ! LA 1.01 MK 1.07 OV 0.91 PT 0.95 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.00 KP 0.99 LA 0.99 NL 0.89 ! PT 0.99 SC 0.85 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.95 HN 1.43 KP 1.22 ! LA 1.08 MK 0.94 NL 1.26 OV 0.97 ! PT 0.95 SC 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 HN 0.89 LA 1.02 NL 1.01 ! OV 0.85 PT 0.93 SC 1.79 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 1.00 HN 0.94 KP 1.02 ! LA 1.02 MK 1.05 OV 0.90 PT 0.98 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.04 KP 0.97 LA 1.01 NL 0.86 ! PT 1.00 SC 0.87 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.96 HN 1.43 KP 1.24 ! LA 1.08 MK 0.97 NL 1.20 OV 0.96 ! PT 0.96 SC 0.91 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 HN 0.90 LA 1.00 NL 1.01 ! OV 0.85 PT 0.94 SC 1.77 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 0.98 HN 0.92 KP 1.01 ! LA 1.01 MK 1.10 OV 0.90 PT 0.94 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.03 KP 0.99 LA 1.02 NL 0.88 ! PT 0.98 SC 0.85 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.94 HN 1.38 KP 1.17 ! LA 1.07 MK 0.95 NL 1.25 OV 0.98 ! PT 0.95 SC 0.94 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 HN 0.92 LA 1.01 NL 0.99 ! OV 0.88 PT 0.92 SC 2.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.99 HN 0.95 KP 1.01 ! LA 1.02 MK 1.11 OV 0.90 PT 0.94 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.03 KP 0.99 LA 1.01 NL 0.88 ! PT 0.99 SC 0.81 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.95 HN 1.45 KP 1.23 ! LA 1.09 MK 0.93 NL 1.24 OV 0.96 ! PT 0.98 SC 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 HN 0.93 LA 1.03 NL 1.07 ! OV 0.81 PT 0.94 SC 1.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 1.00 HN 0.94 KP 1.01 ! LA 1.00 MK 1.08 OV 0.91 PT 0.94 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.99 KP 1.00 LA 0.97 NL 0.92 ! PT 1.01 SC 0.84 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.94 HN 1.32 KP 1.22 ! LA 1.04 MK 0.98 NL 1.23 OV 0.96 ! PT 0.98 SC 0.93 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 HN 0.94 LA 0.98 NL 1.04 ! OV 0.86 PT 0.92 SC 1.89 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.99 HN 0.92 KP 1.01 ! LA 1.00 MK 1.05 OV 0.91 PT 0.95 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.01 KP 1.01 LA 0.95 NL 0.87 ! PT 1.02 SC 0.83 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.95 HN 1.31 KP 1.19 ! LA 1.07 MK 0.97 NL 1.25 OV 0.97 ! PT 0.95 SC 0.92 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 HN 0.91 LA 1.02 NL 1.01 ! OV 0.84 PT 0.96 SC 2.10 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.98 HN 0.92 KP 0.99 ! LA 1.01 MK 1.08 OV 0.91 PT 0.97 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.99 KP 0.99 LA 1.00 NL 0.83 ! PT 1.02 SC 0.86 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.92 HN 1.34 KP 1.23 ! LA 1.06 MK 0.91 NL 1.24 OV 0.96 ! PT 0.98 SC 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 HN 0.97 LA 1.01 NL 1.05 ! OV 0.84 PT 0.94 SC 2.16 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 0.99 HN 0.91 KP 0.99 ! LA 1.01 MK 1.06 OV 0.89 PT 0.96 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.01 KP 0.94 LA 1.00 NL 0.89 ! PT 0.97 SC 0.87 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.94 HN 1.38 KP 1.21 ! LA 1.04 MK 0.92 NL 1.25 OV 0.97 ! PT 0.98 SC 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 HN 0.90 LA 0.97 NL 1.04 ! OV 0.85 PT 0.95 SC 2.07 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 0.99 HN 0.92 KP 0.99 ! LA 0.99 MK 1.07 OV 0.92 PT 0.96 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.02 KP 1.00 LA 0.99 NL 0.92 ! PT 0.97 SC 0.89 ! ! ! Fit before self-cal, rms=0.102464Jy sigma=0.812937 ! Fit after self-cal, rms=0.088734Jy sigma=0.605150 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8717 mas, bmaj=2.536 mas, bpa=3.89 degrees ! Estimated noise=0.678681 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00455101 Jy ! Component: 100 - total flux cleaned = -0.00547442 Jy ! Component: 150 - total flux cleaned = -0.00584903 Jy ! Component: 200 - total flux cleaned = -0.00601794 Jy ! Total flux subtracted in 200 components = -0.00601794 Jy ! Clean residual min=-0.007877 max=0.007058 Jy/beam ! Clean residual mean=-0.000010 rms=0.001659 Jy/beam ! Combined flux in latest and established models = 0.517835 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 73 components and 0.517835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087563Jy sigma=0.594549 ! Fit after self-cal, rms=0.087604Jy sigma=0.593079 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087604Jy sigma=0.593079 ! Fit after self-cal, rms=0.080503Jy sigma=0.535584 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8772 mas, bmaj=2.553 mas, bpa=3.893 degrees ! Estimated noise=0.679574 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000247269 Jy ! Component: 100 - total flux cleaned = -0.000225138 Jy ! Component: 150 - total flux cleaned = -0.000491424 Jy ! Component: 200 - total flux cleaned = -0.000601127 Jy ! Total flux subtracted in 200 components = -0.000601127 Jy ! Clean residual min=-0.005221 max=0.006156 Jy/beam ! Clean residual mean=0.000001 rms=0.000911 Jy/beam ! Combined flux in latest and established models = 0.517234 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 85 components and 0.517234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079940Jy sigma=0.530919 ! Fit after self-cal, rms=0.079924Jy sigma=0.530348 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.6, -2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00534296 Jy ! Component: 100 - total flux cleaned = 0.00618317 Jy ! Component: 150 - total flux cleaned = 0.00617617 Jy ! Component: 200 - total flux cleaned = 0.00627517 Jy ! Total flux subtracted in 200 components = 0.00627517 Jy ! Clean residual min=-0.004287 max=0.003607 Jy/beam ! Clean residual mean=0.000007 rms=0.000803 Jy/beam ! Combined flux in latest and established models = 0.523509 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 103 components and 0.523509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079351Jy sigma=0.525586 ! Fit after self-cal, rms=0.079288Jy sigma=0.525011 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079288Jy sigma=0.525011 ! Fit after self-cal, rms=0.079008Jy sigma=0.518005 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8797 mas, bmaj=2.551 mas, bpa=3.892 degrees ! Estimated noise=0.679245 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000544722 Jy ! Component: 100 - total flux cleaned = -0.00102682 Jy ! Component: 150 - total flux cleaned = -0.000758505 Jy ! Component: 200 - total flux cleaned = -0.00044612 Jy ! Total flux subtracted in 200 components = -0.00044612 Jy ! Clean residual min=-0.003431 max=0.002604 Jy/beam ! Clean residual mean=0.000001 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.523063 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 115 components and 0.523063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078654Jy sigma=0.515244 ! Fit after self-cal, rms=0.078618Jy sigma=0.514988 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000308054 Jy ! Component: 100 - total flux cleaned = -1.75774e-05 Jy ! Component: 150 - total flux cleaned = 0.000242014 Jy ! Component: 200 - total flux cleaned = 0.000423841 Jy ! Total flux subtracted in 200 components = 0.000423841 Jy ! Clean residual min=-0.003167 max=0.002407 Jy/beam ! Clean residual mean=0.000002 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.523486 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 123 components and 0.523486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078489Jy sigma=0.514054 ! Fit after self-cal, rms=0.078470Jy sigma=0.513978 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078470Jy sigma=0.513978 ! Fit after self-cal, rms=0.078697Jy sigma=0.513465 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.348 mas, bmaj=5.424 mas, bpa=0.3233 degrees ! Estimated noise=0.854472 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00124861 Jy ! Component: 100 - total flux cleaned = -0.00144601 Jy ! Component: 150 - total flux cleaned = -0.00172609 Jy ! Component: 200 - total flux cleaned = -0.00184316 Jy ! Total flux subtracted in 200 components = -0.00184316 Jy ! Clean residual min=-0.003881 max=0.002909 Jy/beam ! Clean residual mean=-0.000001 rms=0.000753 Jy/beam ! Combined flux in latest and established models = 0.521643 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 141 components and 0.521643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078653Jy sigma=0.513103 ! Fit after self-cal, rms=0.078626Jy sigma=0.512895 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.11887e-05 Jy ! Component: 100 - total flux cleaned = 0.000172236 Jy ! Component: 150 - total flux cleaned = 0.000102839 Jy ! Component: 200 - total flux cleaned = 3.8782e-05 Jy ! Total flux subtracted in 200 components = 3.8782e-05 Jy ! Clean residual min=-0.003671 max=0.002774 Jy/beam ! Clean residual mean=-0.000000 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.521682 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 152 components and 0.521682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078617Jy sigma=0.512895 ! Fit after self-cal, rms=0.078599Jy sigma=0.512799 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8802 mas, bmaj=2.551 mas, bpa=3.89 degrees ! Estimated noise=0.678295 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8802 x 2.551 at 3.89 degrees (North through East) ! Clean map min=-0.0057692 max=0.39197 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6468 mas, bmaj=1.891 mas, bpa=4.708 degrees ! Estimated noise=1.17966 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.303535 Jy ! Component: 100 - total flux cleaned = 0.373169 Jy ! Component: 150 - total flux cleaned = 0.40491 Jy ! Component: 200 - total flux cleaned = 0.426794 Jy ! Total flux subtracted in 200 components = 0.426794 Jy ! Clean residual min=-0.007480 max=0.012597 Jy/beam ! Clean residual mean=-0.000053 rms=0.001524 Jy/beam ! Combined flux in latest and established models = 0.426794 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.426794 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8802 mas, bmaj=2.551 mas, bpa=3.89 degrees ! Estimated noise=0.678295 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0301847 Jy ! Component: 100 - total flux cleaned = 0.0490317 Jy ! Component: 150 - total flux cleaned = 0.0621515 Jy ! Component: 200 - total flux cleaned = 0.0715402 Jy ! Total flux subtracted in 200 components = 0.0715402 Jy ! Clean residual min=-0.004003 max=0.006007 Jy/beam ! Clean residual mean=-0.000032 rms=0.000995 Jy/beam ! Combined flux in latest and established models = 0.498334 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 61 components and 0.498334 Jy ! Inverting map ! Added new window around map position (-1, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00712204 Jy ! Component: 100 - total flux cleaned = 0.0124133 Jy ! Component: 150 - total flux cleaned = 0.0164376 Jy ! Component: 200 - total flux cleaned = 0.019186 Jy ! Total flux subtracted in 200 components = 0.019186 Jy ! Clean residual min=-0.003263 max=0.002966 Jy/beam ! Clean residual mean=-0.000008 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.51752 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 88 components and 0.51752 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.348 mas, bmaj=5.424 mas, bpa=0.3233 degrees ! Estimated noise=0.854472 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00328395 Jy ! Component: 100 - total flux cleaned = 0.00459899 Jy ! Component: 150 - total flux cleaned = 0.00477603 Jy ! Component: 200 - total flux cleaned = 0.0047793 Jy ! Total flux subtracted in 200 components = 0.0047793 Jy ! Clean residual min=-0.003994 max=0.002630 Jy/beam ! Clean residual mean=-0.000002 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.522299 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.59099e-05 Jy ! Component: 100 - total flux cleaned = -0.000130329 Jy ! Component: 150 - total flux cleaned = -0.000207377 Jy ! Component: 200 - total flux cleaned = -0.000242181 Jy ! Total flux subtracted in 200 components = -0.000242181 Jy ! Clean residual min=-0.003787 max=0.002702 Jy/beam ! Clean residual mean=-0.000001 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.522057 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 134 components and 0.522057 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8802 mas, bmaj=2.551 mas, bpa=3.89 degrees ! Estimated noise=0.678295 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000313408 Jy ! Component: 100 - total flux cleaned = -0.000381276 Jy ! Component: 150 - total flux cleaned = -0.000445049 Jy ! Component: 200 - total flux cleaned = -0.000501839 Jy ! Total flux subtracted in 200 components = -0.000501839 Jy ! Clean residual min=-0.002950 max=0.002294 Jy/beam ! Clean residual mean=-0.000000 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.521556 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 148 components and 0.521555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078603Jy sigma=0.512268 ! Fit after self-cal, rms=0.078484Jy sigma=0.511520 wmodel J0348-2749_X_b_map.mod ! Writing 148 model components to file: J0348-2749_X_b_map.mod wobs J0348-2749_X_b_uvs.fits ! Writing UV FITS file: J0348-2749_X_b_uvs.fits wwins J0348-2749_X_b_map.win ! wwins: Wrote 7 windows to J0348-2749_X_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00119793 Jy ! Component: 100 - total flux cleaned = -0.00184797 Jy ! Component: 150 - total flux cleaned = -0.00215086 Jy ! Component: 200 - total flux cleaned = -0.00243845 Jy ! Component: 250 - total flux cleaned = -0.00267943 Jy ! Component: 300 - total flux cleaned = -0.0028449 Jy ! Component: 350 - total flux cleaned = -0.00303495 Jy ! Component: 400 - total flux cleaned = -0.00309671 Jy ! Component: 450 - total flux cleaned = -0.0031572 Jy ! Component: 500 - total flux cleaned = -0.00318728 Jy ! Component: 550 - total flux cleaned = -0.00324452 Jy ! Component: 600 - total flux cleaned = -0.0033282 Jy ! Component: 650 - total flux cleaned = -0.00341017 Jy ! Component: 700 - total flux cleaned = -0.00338434 Jy ! Component: 750 - total flux cleaned = -0.00341064 Jy ! Component: 800 - total flux cleaned = -0.00335842 Jy ! Component: 850 - total flux cleaned = -0.00333249 Jy ! Component: 900 - total flux cleaned = -0.00320634 Jy ! Component: 950 - total flux cleaned = -0.00320585 Jy ! Component: 1000 - total flux cleaned = -0.00305886 Jy ! Component: 1050 - total flux cleaned = -0.00310675 Jy ! Component: 1100 - total flux cleaned = -0.00301122 Jy ! Component: 1150 - total flux cleaned = -0.00289325 Jy ! Component: 1200 - total flux cleaned = -0.00284646 Jy ! Component: 1250 - total flux cleaned = -0.00282355 Jy ! Component: 1300 - total flux cleaned = -0.00270946 Jy ! Component: 1350 - total flux cleaned = -0.00261974 Jy ! Component: 1400 - total flux cleaned = -0.00259778 Jy ! Component: 1450 - total flux cleaned = -0.00257571 Jy ! Component: 1500 - total flux cleaned = -0.00250989 Jy ! Component: 1550 - total flux cleaned = -0.00237997 Jy ! Component: 1600 - total flux cleaned = -0.00229429 Jy ! Component: 1650 - total flux cleaned = -0.00220918 Jy ! Component: 1700 - total flux cleaned = -0.00208243 Jy ! Component: 1750 - total flux cleaned = -0.00208233 Jy ! Component: 1800 - total flux cleaned = -0.00204052 Jy ! Component: 1850 - total flux cleaned = -0.00193711 Jy ! Component: 1900 - total flux cleaned = -0.00191699 Jy ! Component: 1950 - total flux cleaned = -0.00181553 Jy ! Component: 2000 - total flux cleaned = -0.00181542 Jy ! Component: 2050 - total flux cleaned = -0.00175575 Jy ! Component: 2100 - total flux cleaned = -0.00171604 Jy ! Component: 2150 - total flux cleaned = -0.00163743 Jy ! Component: 2200 - total flux cleaned = -0.00150088 Jy ! Component: 2250 - total flux cleaned = -0.00153974 Jy ! Component: 2300 - total flux cleaned = -0.00142434 Jy ! Component: 2350 - total flux cleaned = -0.00138634 Jy ! Component: 2400 - total flux cleaned = -0.00136761 Jy ! Component: 2450 - total flux cleaned = -0.00131098 Jy ! Component: 2500 - total flux cleaned = -0.00125486 Jy ! Component: 2550 - total flux cleaned = -0.00119923 Jy ! Component: 2600 - total flux cleaned = -0.00119902 Jy ! Component: 2650 - total flux cleaned = -0.00114385 Jy ! Component: 2700 - total flux cleaned = -0.00112582 Jy ! Component: 2750 - total flux cleaned = -0.00103493 Jy ! Component: 2800 - total flux cleaned = -0.00105315 Jy ! Component: 2850 - total flux cleaned = -0.000945568 Jy ! Component: 2900 - total flux cleaned = -0.00087466 Jy ! Component: 2950 - total flux cleaned = -0.00085714 Jy ! Component: 3000 - total flux cleaned = -0.000821962 Jy ! Component: 3050 - total flux cleaned = -0.000752108 Jy ! Component: 3100 - total flux cleaned = -0.000804433 Jy ! Component: 3150 - total flux cleaned = -0.000752475 Jy ! Component: 3200 - total flux cleaned = -0.000700809 Jy ! Component: 3250 - total flux cleaned = -0.000717877 Jy ! Component: 3300 - total flux cleaned = -0.000615923 Jy ! Component: 3350 - total flux cleaned = -0.000599065 Jy ! Component: 3400 - total flux cleaned = -0.000699884 Jy ! Component: 3450 - total flux cleaned = -0.000632909 Jy ! Component: 3500 - total flux cleaned = -0.000566293 Jy ! Component: 3550 - total flux cleaned = -0.000549884 Jy ! Component: 3600 - total flux cleaned = -0.000516899 Jy ! Component: 3650 - total flux cleaned = -0.000500345 Jy ! Component: 3700 - total flux cleaned = -0.000549101 Jy ! Component: 3750 - total flux cleaned = -0.000484263 Jy ! Component: 3800 - total flux cleaned = -0.000484149 Jy ! Component: 3850 - total flux cleaned = -0.000387853 Jy ! Component: 3900 - total flux cleaned = -0.000324069 Jy ! Component: 3950 - total flux cleaned = -0.000292205 Jy ! Component: 4000 - total flux cleaned = -0.000323806 Jy ! Component: 4050 - total flux cleaned = -0.000276724 Jy ! Total flux subtracted in 4096 components = -0.000276732 Jy ! Clean residual min=-0.001038 max=0.001002 Jy/beam ! Clean residual mean=0.000000 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 0.521279 Jy keep ! Adding 317 model components to the UV plane model. ! The established model now contains 464 components and 0.521278 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J0348-2749_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8802 x 2.551 at 3.89 degrees (North through East) ! Clean map min=-0.0021542 max=0.39421 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J0348-2749_X_b_map.fits wmodel /image_prod/ug002_uvm//J0348-2749_X_b_map.mod ! Writing 464 model components to file: /image_prod/ug002_uvm//J0348-2749_X_b_map.mod wobs /image_prod/ug002_uvm//J0348-2749_X_b_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J0348-2749_X_b_uvs.fits wwins /image_prod/ug002_uvm//J0348-2749_X_b_map.win ! wwins: Wrote 8 windows to /image_prod/ug002_uvm//J0348-2749_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.394207 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000277065 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.210852 0.210852 0.421704 0.843408 1.68682 3.37363 6.74726 13.4945 26.989 53.9781 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.394 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1422.8 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J0348-2749_X_b_dfm.log closed on Wed Mar 4 16:36:24 2020