! Started logfile: /image_prod/ug002_uvm//J0325+2224_X_a_dfm.log on Wed Mar 4 16:34:13 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J0325+2224_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J0325+2224_X_a_uvm.fits ! AN table 1: 24 integrations on 36 of 36 possible baselines. ! AN table 2: 6 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.857407 visibilities/baseline/integration-bin. ! Found source: J0325+2224 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 11112 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0325+2224_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 19 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 19 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 19 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 19 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 19 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 19 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 19 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 19 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 19 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 19 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.522087Jy sigma=10.338270 ! Fit after self-cal, rms=0.224722Jy sigma=1.434213 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7844 mas, bmaj=1.729 mas, bpa=-3.883 degrees ! Estimated noise=1.5777 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.842472 Jy ! Component: 100 - total flux cleaned = 1.03667 Jy ! Total flux subtracted in 100 components = 1.03667 Jy ! Clean residual min=-0.040552 max=0.072490 Jy/beam ! Clean residual mean=0.000030 rms=0.007190 Jy/beam ! Combined flux in latest and established models = 1.03667 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 1.03667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.205007Jy sigma=1.308663 ! Fit after self-cal, rms=0.204942Jy sigma=1.308384 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0766851 Jy ! Component: 100 - total flux cleaned = 0.115314 Jy ! Total flux subtracted in 100 components = 0.115314 Jy ! Clean residual min=-0.029758 max=0.058322 Jy/beam ! Clean residual mean=0.000013 rms=0.005861 Jy/beam ! Combined flux in latest and established models = 1.15198 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 9 components and 1.15198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.162589Jy sigma=1.052970 ! Fit after self-cal, rms=0.162507Jy sigma=1.052608 ! Inverting map ! Added new window around map position (1.8, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0489327 Jy ! Component: 100 - total flux cleaned = 0.0727191 Jy ! Total flux subtracted in 100 components = 0.0727191 Jy ! Clean residual min=-0.026495 max=0.044967 Jy/beam ! Clean residual mean=0.000006 rms=0.005016 Jy/beam ! Combined flux in latest and established models = 1.2247 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 18 components and 1.2247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.141261Jy sigma=0.903121 ! Fit after self-cal, rms=0.139176Jy sigma=0.887837 ! Inverting map ! Added new window around map position (-2, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0318729 Jy ! Component: 100 - total flux cleaned = 0.0506742 Jy ! Total flux subtracted in 100 components = 0.0506742 Jy ! Clean residual min=-0.024179 max=0.026366 Jy/beam ! Clean residual mean=0.000001 rms=0.004444 Jy/beam ! Combined flux in latest and established models = 1.27538 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 30 components and 1.27538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.129572Jy sigma=0.819143 ! Fit after self-cal, rms=0.129288Jy sigma=0.817372 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.003 mas, bmaj=2.194 mas, bpa=-4.504 degrees ! Estimated noise=1.06517 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0223517 Jy ! Component: 100 - total flux cleaned = 0.0313408 Jy ! Component: 150 - total flux cleaned = 0.0351333 Jy ! Component: 200 - total flux cleaned = 0.036999 Jy ! Total flux subtracted in 200 components = 0.036999 Jy ! Clean residual min=-0.023817 max=0.023015 Jy/beam ! Clean residual mean=-0.000033 rms=0.004911 Jy/beam ! Combined flux in latest and established models = 1.31238 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 49 components and 1.31238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.124717Jy sigma=0.788633 ! Fit after self-cal, rms=0.124481Jy sigma=0.787174 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.003 x 2.194 at -4.504 degrees (North through East) ! Clean map min=-0.022312 max=1.0853 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.03 HN 0.99 KP 1.10 ! LA 1.04 MK 1.09 NL 1.07 OV 0.95 ! PT 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.03 HN 1.00 KP 1.08 ! LA 1.03 NL 1.01 OV 1.02 PT 0.88 ! SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.03 HN 0.98 KP 1.09 ! LA 1.03 MK 1.08 NL 1.06 OV 0.95 ! PT 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.02 HN 1.00 KP 1.08 ! LA 1.01 NL 1.00 OV 1.04 PT 0.87 ! SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.01 HN 1.00 KP 1.10 ! LA 1.03 MK 1.09 NL 1.08 OV 0.93 ! PT 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.02 HN 0.99 KP 1.07 ! LA 1.02 NL 1.00 OV 1.03 PT 0.87 ! SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.02 HN 1.00 KP 1.09 ! LA 1.03 MK 1.07 NL 1.07 OV 0.93 ! PT 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.00 HN 0.99 KP 1.08 ! LA 1.02 NL 1.00 OV 1.01 PT 0.89 ! SC 1.05 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.02 HN 0.98 KP 1.11 ! LA 1.02 MK 1.07 NL 1.07 OV 0.93 ! PT 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.03 HN 0.99 KP 1.08 ! LA 1.02 NL 1.00 OV 1.02 PT 0.88 ! SC 1.04 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 0.99 KP 1.08 ! LA 1.02 MK 1.09 NL 1.07 OV 0.93 ! PT 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.02 HN 0.98 KP 1.07 ! LA 1.01 NL 1.02 OV 1.04 PT 0.87 ! SC 1.02 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.03 HN 0.97 KP 1.09 ! LA 1.03 MK 1.07 NL 1.07 OV 0.92 ! PT 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.01 HN 1.00 KP 1.07 ! LA 1.02 NL 1.01 OV 1.04 PT 0.87 ! SC 1.04 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.02 HN 0.97 KP 1.08 ! LA 1.02 MK 1.06 NL 1.07 OV 0.93 ! PT 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.00 HN 1.00 KP 1.07 ! LA 1.00 NL 1.02 OV 1.03 PT 0.86 ! SC 1.04 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.96 KP 1.07 ! LA 1.04 MK 1.06 NL 1.04 OV 0.92 ! PT 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.00 HN 0.99 KP 1.07 ! LA 1.02 NL 1.01 OV 1.03 PT 0.88 ! SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 0.97 KP 1.08 ! LA 1.01 MK 1.06 NL 1.07 OV 0.91 ! PT 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.01 HN 1.00 KP 1.07 ! LA 1.01 NL 1.00 OV 1.02 PT 0.89 ! SC 1.04 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.01 HN 0.97 KP 1.10 ! LA 1.02 MK 1.05 NL 1.03 OV 0.92 ! PT 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.02 HN 0.99 KP 1.08 ! LA 1.00 NL 1.00 OV 1.03 PT 0.88 ! SC 1.04 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 0.97 KP 1.01 ! LA 1.03 MK 1.05 NL 1.06 OV 0.91 ! PT 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.01 HN 0.98 KP 1.03 ! LA 1.02 NL 0.99 OV 1.01 PT 0.89 ! SC 1.05 ! ! ! Fit before self-cal, rms=0.124481Jy sigma=0.787174 ! Fit after self-cal, rms=0.091240Jy sigma=0.558540 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.015 mas, bmaj=2.199 mas, bpa=-4.298 degrees ! Estimated noise=1.0733 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118144 Jy ! Component: 100 - total flux cleaned = 0.000730019 Jy ! Component: 150 - total flux cleaned = 2.61841e-05 Jy ! Component: 200 - total flux cleaned = -0.00117349 Jy ! Total flux subtracted in 200 components = -0.00117349 Jy ! Clean residual min=-0.010616 max=0.010322 Jy/beam ! Clean residual mean=-0.000005 rms=0.002100 Jy/beam ! Combined flux in latest and established models = 1.3112 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 75 components and 1.3112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087520Jy sigma=0.536126 ! Fit after self-cal, rms=0.087415Jy sigma=0.535164 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087415Jy sigma=0.535164 ! Fit after self-cal, rms=0.067182Jy sigma=0.418468 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.013 mas, bmaj=2.2 mas, bpa=-4.34 degrees ! Estimated noise=1.07066 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00599778 Jy ! Component: 100 - total flux cleaned = -0.00743509 Jy ! Component: 150 - total flux cleaned = -0.00842765 Jy ! Component: 200 - total flux cleaned = -0.00842233 Jy ! Total flux subtracted in 200 components = -0.00842233 Jy ! Clean residual min=-0.009347 max=0.005007 Jy/beam ! Clean residual mean=0.000002 rms=0.001170 Jy/beam ! Combined flux in latest and established models = 1.30278 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 88 components and 1.30278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065240Jy sigma=0.406984 ! Fit after self-cal, rms=0.065234Jy sigma=0.406852 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.62597e-06 Jy ! Component: 100 - total flux cleaned = -0.000550488 Jy ! Component: 150 - total flux cleaned = -0.000801887 Jy ! Component: 200 - total flux cleaned = -0.000690853 Jy ! Total flux subtracted in 200 components = -0.000690853 Jy ! Clean residual min=-0.009190 max=0.004829 Jy/beam ! Clean residual mean=0.000002 rms=0.001114 Jy/beam ! Combined flux in latest and established models = 1.30209 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 99 components and 1.30209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064739Jy sigma=0.403865 ! Fit after self-cal, rms=0.064739Jy sigma=0.403837 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064739Jy sigma=0.403837 ! Fit after self-cal, rms=0.064350Jy sigma=0.400969 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.014 mas, bmaj=2.201 mas, bpa=-4.345 degrees ! Estimated noise=1.07005 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00589713 Jy ! Component: 100 - total flux cleaned = -0.00784821 Jy ! Component: 150 - total flux cleaned = -0.00785306 Jy ! Component: 200 - total flux cleaned = -0.00785589 Jy ! Total flux subtracted in 200 components = -0.00785589 Jy ! Clean residual min=-0.008399 max=0.004309 Jy/beam ! Clean residual mean=0.000003 rms=0.001001 Jy/beam ! Combined flux in latest and established models = 1.29423 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 108 components and 1.29423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063624Jy sigma=0.397003 ! Fit after self-cal, rms=0.063622Jy sigma=0.396987 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.41263e-05 Jy ! Component: 100 - total flux cleaned = -9.21655e-05 Jy ! Component: 150 - total flux cleaned = -9.14535e-05 Jy ! Component: 200 - total flux cleaned = -9.21872e-05 Jy ! Total flux subtracted in 200 components = -9.21872e-05 Jy ! Clean residual min=-0.008266 max=0.004175 Jy/beam ! Clean residual mean=0.000003 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 1.29414 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 114 components and 1.29414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063405Jy sigma=0.395682 ! Fit after self-cal, rms=0.063406Jy sigma=0.395669 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063406Jy sigma=0.395669 ! Fit after self-cal, rms=0.063247Jy sigma=0.394145 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.046 mas, bmaj=2.918 mas, bpa=-5.358 degrees ! Estimated noise=1.34661 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00585811 Jy ! Component: 100 - total flux cleaned = -0.00691548 Jy ! Component: 150 - total flux cleaned = -0.00747185 Jy ! Component: 200 - total flux cleaned = -0.00785273 Jy ! Total flux subtracted in 200 components = -0.00785273 Jy ! Clean residual min=-0.006611 max=0.004045 Jy/beam ! Clean residual mean=0.000006 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 1.28629 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 123 components and 1.28629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063131Jy sigma=0.393253 ! Fit after self-cal, rms=0.063080Jy sigma=0.392814 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000451937 Jy ! Component: 100 - total flux cleaned = -0.000612756 Jy ! Component: 150 - total flux cleaned = -0.000701129 Jy ! Component: 200 - total flux cleaned = -0.000700319 Jy ! Total flux subtracted in 200 components = -0.000700319 Jy ! Clean residual min=-0.006594 max=0.003937 Jy/beam ! Clean residual mean=0.000007 rms=0.001087 Jy/beam ! Combined flux in latest and established models = 1.28559 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 133 components and 1.28559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063108Jy sigma=0.392886 ! Fit after self-cal, rms=0.063102Jy sigma=0.392802 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.015 mas, bmaj=2.202 mas, bpa=-4.328 degrees ! Estimated noise=1.06972 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.015 x 2.202 at -4.328 degrees (North through East) ! Clean map min=-0.010071 max=1.0929 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063102Jy sigma=0.392802 ! Fit after self-cal, rms=0.059880Jy sigma=0.364940 ! Inverting map and beam ! Estimated beam: bmin=1.016 mas, bmaj=2.201 mas, bpa=-4.309 degrees ! Estimated noise=1.0688 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00405935 Jy ! Component: 100 - total flux cleaned = -0.00488201 Jy ! Component: 150 - total flux cleaned = -0.00496853 Jy ! Component: 200 - total flux cleaned = -0.00504338 Jy ! Total flux subtracted in 200 components = -0.00504338 Jy ! Clean residual min=-0.006482 max=0.003547 Jy/beam ! Clean residual mean=0.000003 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 1.28054 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 139 components and 1.28054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059494Jy sigma=0.362622 ! Fit after self-cal, rms=0.059482Jy sigma=0.362576 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.12922e-06 Jy ! Component: 100 - total flux cleaned = -6.52189e-05 Jy ! Component: 150 - total flux cleaned = -0.00031976 Jy ! Component: 200 - total flux cleaned = -0.000378854 Jy ! Total flux subtracted in 200 components = -0.000378854 Jy ! Clean residual min=-0.006368 max=0.003522 Jy/beam ! Clean residual mean=0.000003 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 1.28017 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 143 components and 1.28017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059345Jy sigma=0.361732 ! Fit after self-cal, rms=0.059341Jy sigma=0.361715 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059341Jy sigma=0.361715 ! Fit after self-cal, rms=0.059265Jy sigma=0.360908 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7934 mas, bmaj=1.743 mas, bpa=-3.702 degrees ! Estimated noise=1.58539 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.846311 Jy ! Component: 100 - total flux cleaned = 1.0375 Jy ! Component: 150 - total flux cleaned = 1.11084 Jy ! Component: 200 - total flux cleaned = 1.15608 Jy ! Total flux subtracted in 200 components = 1.15608 Jy ! Clean residual min=-0.014700 max=0.026577 Jy/beam ! Clean residual mean=0.000017 rms=0.002624 Jy/beam ! Combined flux in latest and established models = 1.15608 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 1.15608 Jy ! Inverting map and beam ! Estimated beam: bmin=1.016 mas, bmaj=2.201 mas, bpa=-4.294 degrees ! Estimated noise=1.06855 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0433097 Jy ! Component: 100 - total flux cleaned = 0.0687949 Jy ! Component: 150 - total flux cleaned = 0.0850021 Jy ! Component: 200 - total flux cleaned = 0.0963224 Jy ! Total flux subtracted in 200 components = 0.0963224 Jy ! Clean residual min=-0.006308 max=0.006936 Jy/beam ! Clean residual mean=0.000013 rms=0.001320 Jy/beam ! Combined flux in latest and established models = 1.2524 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 34 components and 1.2524 Jy ! Inverting map ! Added new window around map position (-15.2, -25.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00429546 Jy ! Component: 100 - total flux cleaned = 0.00632546 Jy ! Component: 150 - total flux cleaned = 0.00802999 Jy ! Component: 200 - total flux cleaned = 0.00947491 Jy ! Total flux subtracted in 200 components = 0.00947491 Jy ! Clean residual min=-0.005771 max=0.005249 Jy/beam ! Clean residual mean=0.000007 rms=0.001000 Jy/beam ! Combined flux in latest and established models = 1.26188 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 48 components and 1.26188 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.051 mas, bmaj=2.917 mas, bpa=-5.254 degrees ! Estimated noise=1.34322 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00633738 Jy ! Component: 100 - total flux cleaned = 0.00811321 Jy ! Component: 150 - total flux cleaned = 0.00886792 Jy ! Component: 200 - total flux cleaned = 0.00939602 Jy ! Total flux subtracted in 200 components = 0.00939602 Jy ! Clean residual min=-0.006701 max=0.004243 Jy/beam ! Clean residual mean=0.000007 rms=0.001064 Jy/beam ! Combined flux in latest and established models = 1.27127 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00034654 Jy ! Component: 100 - total flux cleaned = 0.000658399 Jy ! Component: 150 - total flux cleaned = 0.0010334 Jy ! Component: 200 - total flux cleaned = 0.00137299 Jy ! Total flux subtracted in 200 components = 0.00137299 Jy ! Clean residual min=-0.006467 max=0.003987 Jy/beam ! Clean residual mean=0.000006 rms=0.000971 Jy/beam ! Combined flux in latest and established models = 1.27265 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 87 components and 1.27265 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.016 mas, bmaj=2.201 mas, bpa=-4.294 degrees ! Estimated noise=1.06855 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000919049 Jy ! Component: 100 - total flux cleaned = -0.000788114 Jy ! Component: 150 - total flux cleaned = -0.000682442 Jy ! Component: 200 - total flux cleaned = -0.00049783 Jy ! Total flux subtracted in 200 components = -0.00049783 Jy ! Clean residual min=-0.005358 max=0.003410 Jy/beam ! Clean residual mean=0.000003 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 1.27215 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 106 components and 1.27215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059048Jy sigma=0.359870 ! Fit after self-cal, rms=0.059010Jy sigma=0.359465 wmodel J0325+2224_X_a_map.mod ! Writing 106 model components to file: J0325+2224_X_a_map.mod wobs J0325+2224_X_a_uvs.fits ! Writing UV FITS file: J0325+2224_X_a_uvs.fits wwins J0325+2224_X_a_map.win ! wwins: Wrote 6 windows to J0325+2224_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00220863 Jy ! Component: 100 - total flux cleaned = -0.00335996 Jy ! Component: 150 - total flux cleaned = -0.00391751 Jy ! Component: 200 - total flux cleaned = -0.00438982 Jy ! Component: 250 - total flux cleaned = -0.0046426 Jy ! Component: 300 - total flux cleaned = -0.0049835 Jy ! Component: 350 - total flux cleaned = -0.00521793 Jy ! Component: 400 - total flux cleaned = -0.00540158 Jy ! Component: 450 - total flux cleaned = -0.00558128 Jy ! Component: 500 - total flux cleaned = -0.00571234 Jy ! Component: 550 - total flux cleaned = -0.00579823 Jy ! Component: 600 - total flux cleaned = -0.00588161 Jy ! Component: 650 - total flux cleaned = -0.0059228 Jy ! Component: 700 - total flux cleaned = -0.0060446 Jy ! Component: 750 - total flux cleaned = -0.00600419 Jy ! Component: 800 - total flux cleaned = -0.0059648 Jy ! Component: 850 - total flux cleaned = -0.00592597 Jy ! Component: 900 - total flux cleaned = -0.00585022 Jy ! Component: 950 - total flux cleaned = -0.00585065 Jy ! Component: 1000 - total flux cleaned = -0.00585051 Jy ! Component: 1050 - total flux cleaned = -0.00577874 Jy ! Component: 1100 - total flux cleaned = -0.00577952 Jy ! Component: 1150 - total flux cleaned = -0.00592218 Jy ! Component: 1200 - total flux cleaned = -0.00588718 Jy ! Component: 1250 - total flux cleaned = -0.00592173 Jy ! Component: 1300 - total flux cleaned = -0.00602383 Jy ! Component: 1350 - total flux cleaned = -0.00588859 Jy ! Component: 1400 - total flux cleaned = -0.00595574 Jy ! Component: 1450 - total flux cleaned = -0.00612047 Jy ! Component: 1500 - total flux cleaned = -0.00608758 Jy ! Component: 1550 - total flux cleaned = -0.00595815 Jy ! Component: 1600 - total flux cleaned = -0.00599073 Jy ! Component: 1650 - total flux cleaned = -0.0059907 Jy ! Component: 1700 - total flux cleaned = -0.00605333 Jy ! Component: 1750 - total flux cleaned = -0.00599109 Jy ! Component: 1800 - total flux cleaned = -0.00605239 Jy ! Component: 1850 - total flux cleaned = -0.00605204 Jy ! Component: 1900 - total flux cleaned = -0.00611249 Jy ! Component: 1950 - total flux cleaned = -0.00611275 Jy ! Component: 2000 - total flux cleaned = -0.00620142 Jy ! Component: 2050 - total flux cleaned = -0.00623035 Jy ! Component: 2100 - total flux cleaned = -0.00625891 Jy ! Component: 2150 - total flux cleaned = -0.00625888 Jy ! Component: 2200 - total flux cleaned = -0.00642923 Jy ! Component: 2250 - total flux cleaned = -0.00637293 Jy ! Component: 2300 - total flux cleaned = -0.00640058 Jy ! Component: 2350 - total flux cleaned = -0.00640042 Jy ! Component: 2400 - total flux cleaned = -0.00645504 Jy ! Component: 2450 - total flux cleaned = -0.00642746 Jy ! Component: 2500 - total flux cleaned = -0.00658939 Jy ! Component: 2550 - total flux cleaned = -0.00645561 Jy ! Component: 2600 - total flux cleaned = -0.00648223 Jy ! Component: 2650 - total flux cleaned = -0.00656105 Jy ! Component: 2700 - total flux cleaned = -0.00658707 Jy ! Component: 2750 - total flux cleaned = -0.00666498 Jy ! Component: 2800 - total flux cleaned = -0.00666459 Jy ! Component: 2850 - total flux cleaned = -0.00674095 Jy ! Component: 2900 - total flux cleaned = -0.00661408 Jy ! Component: 2950 - total flux cleaned = -0.00671493 Jy ! Component: 3000 - total flux cleaned = -0.00669005 Jy ! Component: 3050 - total flux cleaned = -0.00678902 Jy ! Component: 3100 - total flux cleaned = -0.00681393 Jy ! Component: 3150 - total flux cleaned = -0.00681398 Jy ! Component: 3200 - total flux cleaned = -0.00683829 Jy ! Component: 3250 - total flux cleaned = -0.00691095 Jy ! Component: 3300 - total flux cleaned = -0.00691085 Jy ! Component: 3350 - total flux cleaned = -0.00698189 Jy ! Component: 3400 - total flux cleaned = -0.00700541 Jy ! Component: 3450 - total flux cleaned = -0.0069821 Jy ! Component: 3500 - total flux cleaned = -0.00702863 Jy ! Component: 3550 - total flux cleaned = -0.00716683 Jy ! Component: 3600 - total flux cleaned = -0.00714395 Jy ! Component: 3650 - total flux cleaned = -0.00725746 Jy ! Component: 3700 - total flux cleaned = -0.00716714 Jy ! Component: 3750 - total flux cleaned = -0.00732385 Jy ! Component: 3800 - total flux cleaned = -0.0073684 Jy ! Component: 3850 - total flux cleaned = -0.00741241 Jy ! Component: 3900 - total flux cleaned = -0.00736854 Jy ! Component: 3950 - total flux cleaned = -0.00747774 Jy ! Component: 4000 - total flux cleaned = -0.00754255 Jy ! Component: 4050 - total flux cleaned = -0.00765002 Jy ! Total flux subtracted in 4096 components = -0.00765 Jy ! Clean residual min=-0.001176 max=0.001115 Jy/beam ! Clean residual mean=0.000001 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 1.2645 Jy keep ! Adding 296 model components to the UV plane model. ! The established model now contains 400 components and 1.2645 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J0325+2224_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.016 x 2.201 at -4.294 degrees (North through East) ! Clean map min=-0.007138 max=1.0947 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J0325+2224_X_a_map.fits wmodel /image_prod/ug002_uvm//J0325+2224_X_a_map.mod ! Writing 400 model components to file: /image_prod/ug002_uvm//J0325+2224_X_a_map.mod wobs /image_prod/ug002_uvm//J0325+2224_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J0325+2224_X_a_uvs.fits wwins /image_prod/ug002_uvm//J0325+2224_X_a_map.win ! wwins: Wrote 7 windows to /image_prod/ug002_uvm//J0325+2224_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.09474 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000369971 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.101386 0.101386 0.202772 0.405544 0.811089 1.62218 3.24436 6.48871 12.9774 25.9548 51.9097 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.094 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2958.99 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J0325+2224_X_a_dfm.log closed on Wed Mar 4 16:34:18 2020