! Started logfile: /image_prod/ug002_uvm//J0310+3814_X_a_dfm.log on Wed Mar 4 16:33:48 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J0310+3814_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J0310+3814_X_a_uvm.fits ! AN table 1: 6 integrations on 36 of 36 possible baselines. ! AN table 2: 30 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.808429 visibilities/baseline/integration-bin. ! Found source: J0310+3814 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 15192 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0310+3814_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 39 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 39 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 39 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 39 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 39 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 39 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 39 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 39 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 39 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 39 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 39 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 39 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.166470Jy sigma=9.992801 ! Fit after self-cal, rms=0.435492Jy sigma=3.379824 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6951 mas, bmaj=1.472 mas, bpa=-4.539 degrees ! Estimated noise=1.04238 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.451752 Jy ! Component: 100 - total flux cleaned = 0.554236 Jy ! Total flux subtracted in 100 components = 0.554236 Jy ! Clean residual min=-0.019218 max=0.037064 Jy/beam ! Clean residual mean=0.000002 rms=0.004300 Jy/beam ! Combined flux in latest and established models = 0.554236 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.554236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.139167Jy sigma=1.349933 ! Fit after self-cal, rms=0.139164Jy sigma=1.349902 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0367344 Jy ! Component: 100 - total flux cleaned = 0.0545375 Jy ! Total flux subtracted in 100 components = 0.0545375 Jy ! Clean residual min=-0.019550 max=0.026690 Jy/beam ! Clean residual mean=-0.000001 rms=0.003898 Jy/beam ! Combined flux in latest and established models = 0.608774 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 12 components and 0.608774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.128626Jy sigma=1.206713 ! Fit after self-cal, rms=0.128624Jy sigma=1.206676 ! Inverting map ! Added new window around map position (1.8, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0253685 Jy ! Component: 100 - total flux cleaned = 0.0374477 Jy ! Total flux subtracted in 100 components = 0.0374477 Jy ! Clean residual min=-0.018299 max=0.022986 Jy/beam ! Clean residual mean=-0.000002 rms=0.003703 Jy/beam ! Combined flux in latest and established models = 0.646221 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 24 components and 0.646221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.123405Jy sigma=1.151308 ! Fit after self-cal, rms=0.122881Jy sigma=1.146512 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8884 mas, bmaj=1.791 mas, bpa=-4.332 degrees ! Estimated noise=0.721583 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-18.4, 16.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0243023 Jy ! Component: 100 - total flux cleaned = 0.0350043 Jy ! Component: 150 - total flux cleaned = 0.0427637 Jy ! Component: 200 - total flux cleaned = 0.0486101 Jy ! Total flux subtracted in 200 components = 0.0486101 Jy ! Clean residual min=-0.013930 max=0.023409 Jy/beam ! Clean residual mean=-0.000008 rms=0.003996 Jy/beam ! Combined flux in latest and established models = 0.694831 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 48 components and 0.694831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.119235Jy sigma=1.077845 ! Fit after self-cal, rms=0.118877Jy sigma=1.073733 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8884 x 1.791 at -4.332 degrees (North through East) ! Clean map min=-0.01359 max=0.58787 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.91 HN 0.91 KP 0.99 ! LA 0.89 MK 0.92 NL 0.93 OV 0.84 ! PT 0.84 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.03 HN 0.98 KP 1.09 ! LA 1.02 MK 1.11 NL 1.19 OV 1.04 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.91 HN 0.92 KP 1.00 ! LA 0.90 MK 0.93 NL 0.93 OV 0.83 ! PT 0.83 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.01 HN 0.98 KP 1.09 ! LA 1.02 MK 1.11 NL 1.19 OV 1.05 ! PT 0.90 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.91 HN 0.92 KP 0.99 ! LA 0.89 MK 0.94 NL 0.94 OV 0.84 ! PT 0.82 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.01 HN 0.99 KP 1.10 ! LA 1.02 MK 1.07 NL 1.17 OV 1.05 ! PT 0.91 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.90 HN 0.94 KP 0.98 ! LA 0.90 MK 0.94 NL 0.94 OV 0.84 ! PT 0.82 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.01 HN 0.98 KP 1.11 ! LA 1.02 MK 1.09 NL 1.18 OV 1.05 ! PT 0.91 SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.91 HN 0.95 KP 0.97 ! LA 0.89 MK 0.96 NL 0.94 OV 0.83 ! PT 0.85 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.01 HN 0.99 KP 1.10 ! LA 1.03 MK 1.11 NL 1.18 OV 1.05 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.90 HN 0.91 KP 1.00 ! LA 0.90 MK 0.96 NL 0.95 OV 0.84 ! PT 0.83 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.02 HN 0.99 KP 1.12 ! LA 1.02 MK 1.12 NL 1.21 OV 1.05 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.91 HN 0.95 KP 1.00 ! LA 0.90 MK 0.94 NL 0.95 OV 0.83 ! PT 0.83 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.02 HN 1.01 KP 1.10 ! LA 1.02 MK 1.13 NL 1.19 OV 1.06 ! PT 0.92 SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.91 HN 0.93 KP 1.00 ! LA 0.90 MK 0.94 NL 0.94 OV 0.84 ! PT 0.82 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.02 HN 1.00 KP 1.12 ! LA 1.02 MK 1.14 NL 1.18 OV 1.06 ! PT 0.90 SC 1.00 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.90 HN 0.95 KP 1.00 ! LA 0.91 MK 0.93 NL 0.94 OV 0.84 ! PT 0.82 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.01 HN 1.00 KP 1.11 ! LA 1.03 MK 1.14 NL 1.19 OV 1.06 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.92 HN 0.92 KP 1.00 ! LA 0.87 MK 0.94 NL 0.95 OV 0.83 ! PT 0.84 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.04 HN 1.01 KP 1.10 ! LA 1.03 MK 1.15 NL 1.20 OV 1.06 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.91 HN 0.94 KP 0.99 ! LA 0.87 MK 0.89 NL 0.95 OV 0.84 ! PT 0.83 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.02 HN 0.99 KP 1.12 ! LA 1.03 MK 1.15 NL 1.18 OV 1.07 ! PT 0.92 SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.90 HN 0.95 KP 0.96 ! LA 0.89 MK 0.91 NL 0.94 OV 0.83 ! PT 0.85 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.02 HN 1.00 KP 1.09 ! LA 1.03 MK 1.17 NL 1.18 OV 1.07 ! PT 0.91 SC 1.02 ! ! ! Fit before self-cal, rms=0.118877Jy sigma=1.073733 ! Fit after self-cal, rms=0.087990Jy sigma=0.626462 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8977 mas, bmaj=1.808 mas, bpa=-4.434 degrees ! Estimated noise=0.723624 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0127686 Jy ! Component: 100 - total flux cleaned = -0.0184522 Jy ! Component: 150 - total flux cleaned = -0.0196469 Jy ! Component: 200 - total flux cleaned = -0.0202602 Jy ! Total flux subtracted in 200 components = -0.0202602 Jy ! Clean residual min=-0.008637 max=0.007363 Jy/beam ! Clean residual mean=-0.000001 rms=0.001677 Jy/beam ! Combined flux in latest and established models = 0.674571 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 67 components and 0.674571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085502Jy sigma=0.607808 ! Fit after self-cal, rms=0.085332Jy sigma=0.606117 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085332Jy sigma=0.606117 ! Fit after self-cal, rms=0.067349Jy sigma=0.485248 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8974 mas, bmaj=1.816 mas, bpa=-3.592 degrees ! Estimated noise=0.72328 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00760235 Jy ! Component: 100 - total flux cleaned = -0.00923811 Jy ! Component: 150 - total flux cleaned = -0.00954059 Jy ! Component: 200 - total flux cleaned = -0.0100735 Jy ! Total flux subtracted in 200 components = -0.0100735 Jy ! Clean residual min=-0.004254 max=0.002990 Jy/beam ! Clean residual mean=-0.000001 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.664498 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 81 components and 0.664498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066041Jy sigma=0.474286 ! Fit after self-cal, rms=0.065919Jy sigma=0.473103 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00128192 Jy ! Component: 100 - total flux cleaned = -0.00161952 Jy ! Component: 150 - total flux cleaned = -0.00202277 Jy ! Component: 200 - total flux cleaned = -0.00246039 Jy ! Total flux subtracted in 200 components = -0.00246039 Jy ! Clean residual min=-0.003722 max=0.003837 Jy/beam ! Clean residual mean=-0.000001 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.662037 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 88 components and 0.662037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065574Jy sigma=0.469942 ! Fit after self-cal, rms=0.065535Jy sigma=0.469745 ! Inverting map ! Added new window around map position (-2, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00288844 Jy ! Component: 100 - total flux cleaned = 0.0023264 Jy ! Component: 150 - total flux cleaned = 0.00155914 Jy ! Component: 200 - total flux cleaned = 0.000796782 Jy ! Total flux subtracted in 200 components = 0.000796782 Jy ! Clean residual min=-0.003230 max=0.002256 Jy/beam ! Clean residual mean=-0.000001 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.662834 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 103 components and 0.662834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065159Jy sigma=0.465832 ! Fit after self-cal, rms=0.065119Jy sigma=0.465584 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065119Jy sigma=0.465584 ! Fit after self-cal, rms=0.065269Jy sigma=0.463191 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8971 mas, bmaj=1.817 mas, bpa=-3.561 degrees ! Estimated noise=0.722782 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00388472 Jy ! Component: 100 - total flux cleaned = -0.00538928 Jy ! Component: 150 - total flux cleaned = -0.00594911 Jy ! Component: 200 - total flux cleaned = -0.00637891 Jy ! Total flux subtracted in 200 components = -0.00637891 Jy ! Clean residual min=-0.002471 max=0.001945 Jy/beam ! Clean residual mean=-0.000000 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.656455 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 112 components and 0.656455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064947Jy sigma=0.460517 ! Fit after self-cal, rms=0.064917Jy sigma=0.460296 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000502824 Jy ! Component: 100 - total flux cleaned = -0.000696493 Jy ! Component: 150 - total flux cleaned = -0.000870132 Jy ! Component: 200 - total flux cleaned = -0.00103005 Jy ! Total flux subtracted in 200 components = -0.00103005 Jy ! Clean residual min=-0.002356 max=0.001974 Jy/beam ! Clean residual mean=-0.000000 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.655425 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 115 components and 0.655425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064802Jy sigma=0.459350 ! Fit after self-cal, rms=0.064792Jy sigma=0.459294 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064792Jy sigma=0.459294 ! Fit after self-cal, rms=0.064910Jy sigma=0.458448 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.125 mas, bmaj=2.701 mas, bpa=-6.594 degrees ! Estimated noise=0.929466 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00335662 Jy ! Component: 100 - total flux cleaned = -0.0050261 Jy ! Component: 150 - total flux cleaned = -0.00577059 Jy ! Component: 200 - total flux cleaned = -0.0060366 Jy ! Total flux subtracted in 200 components = -0.0060366 Jy ! Clean residual min=-0.002486 max=0.002046 Jy/beam ! Clean residual mean=0.000000 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.649389 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 142 components and 0.649389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064819Jy sigma=0.457689 ! Fit after self-cal, rms=0.064808Jy sigma=0.457571 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00020396 Jy ! Component: 100 - total flux cleaned = -0.000274753 Jy ! Component: 150 - total flux cleaned = -0.000396292 Jy ! Component: 200 - total flux cleaned = -0.000451962 Jy ! Total flux subtracted in 200 components = -0.000451962 Jy ! Clean residual min=-0.002402 max=0.002024 Jy/beam ! Clean residual mean=0.000000 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.648937 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 148 components and 0.648937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064778Jy sigma=0.457387 ! Fit after self-cal, rms=0.064776Jy sigma=0.457367 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8973 mas, bmaj=1.818 mas, bpa=-3.535 degrees ! Estimated noise=0.722401 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8973 x 1.818 at -3.535 degrees (North through East) ! Clean map min=-0.0020739 max=0.59432 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064776Jy sigma=0.457367 ! Fit after self-cal, rms=0.061740Jy sigma=0.428375 ! Inverting map and beam ! Estimated beam: bmin=0.8975 mas, bmaj=1.819 mas, bpa=-3.534 degrees ! Estimated noise=0.721856 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00180705 Jy ! Component: 100 - total flux cleaned = -0.00233257 Jy ! Component: 150 - total flux cleaned = -0.00270481 Jy ! Component: 200 - total flux cleaned = -0.00287354 Jy ! Total flux subtracted in 200 components = -0.00287354 Jy ! Clean residual min=-0.001903 max=0.001571 Jy/beam ! Clean residual mean=0.000000 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.646063 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 154 components and 0.646063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061654Jy sigma=0.427564 ! Fit after self-cal, rms=0.061650Jy sigma=0.427535 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000230591 Jy ! Component: 100 - total flux cleaned = -0.000193982 Jy ! Component: 150 - total flux cleaned = -0.000195137 Jy ! Component: 200 - total flux cleaned = -0.000195901 Jy ! Total flux subtracted in 200 components = -0.000195901 Jy ! Clean residual min=-0.001874 max=0.001578 Jy/beam ! Clean residual mean=0.000000 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.645867 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 159 components and 0.645867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061607Jy sigma=0.427207 ! Fit after self-cal, rms=0.061606Jy sigma=0.427196 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061606Jy sigma=0.427196 ! Fit after self-cal, rms=0.061735Jy sigma=0.426957 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6985 mas, bmaj=1.496 mas, bpa=-3.618 degrees ! Estimated noise=1.0593 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.459059 Jy ! Component: 100 - total flux cleaned = 0.560185 Jy ! Component: 150 - total flux cleaned = 0.592723 Jy ! Component: 200 - total flux cleaned = 0.608277 Jy ! Total flux subtracted in 200 components = 0.608277 Jy ! Clean residual min=-0.004718 max=0.007487 Jy/beam ! Clean residual mean=0.000001 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.608278 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.608278 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8979 mas, bmaj=1.819 mas, bpa=-3.484 degrees ! Estimated noise=0.721844 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0125434 Jy ! Component: 100 - total flux cleaned = 0.0198264 Jy ! Component: 150 - total flux cleaned = 0.0247874 Jy ! Component: 200 - total flux cleaned = 0.0284277 Jy ! Total flux subtracted in 200 components = 0.0284277 Jy ! Clean residual min=-0.001997 max=0.002498 Jy/beam ! Clean residual mean=0.000000 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.636705 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 46 components and 0.636705 Jy ! Inverting map ! Added new window around map position (6.2, -5.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0028747 Jy ! Component: 100 - total flux cleaned = 0.00477218 Jy ! Component: 150 - total flux cleaned = 0.00573709 Jy ! Component: 200 - total flux cleaned = 0.00643459 Jy ! Total flux subtracted in 200 components = 0.00643459 Jy ! Clean residual min=-0.001616 max=0.001636 Jy/beam ! Clean residual mean=0.000000 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.64314 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 63 components and 0.64314 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.128 mas, bmaj=2.703 mas, bpa=-6.396 degrees ! Estimated noise=0.927425 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000796816 Jy ! Component: 100 - total flux cleaned = 0.00108843 Jy ! Component: 150 - total flux cleaned = 0.00136393 Jy ! Component: 200 - total flux cleaned = 0.0015302 Jy ! Total flux subtracted in 200 components = 0.0015302 Jy ! Clean residual min=-0.002015 max=0.001892 Jy/beam ! Clean residual mean=0.000001 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.64467 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000171295 Jy ! Component: 100 - total flux cleaned = 0.000247976 Jy ! Component: 150 - total flux cleaned = 0.000293878 Jy ! Component: 200 - total flux cleaned = 0.000336584 Jy ! Total flux subtracted in 200 components = 0.000336584 Jy ! Clean residual min=-0.002027 max=0.001785 Jy/beam ! Clean residual mean=0.000001 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.645006 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 110 components and 0.645006 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8979 mas, bmaj=1.819 mas, bpa=-3.484 degrees ! Estimated noise=0.721844 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000161764 Jy ! Component: 100 - total flux cleaned = 4.96843e-05 Jy ! Component: 150 - total flux cleaned = 0.000242801 Jy ! Component: 200 - total flux cleaned = 0.00038796 Jy ! Total flux subtracted in 200 components = 0.00038796 Jy ! Clean residual min=-0.001567 max=0.001671 Jy/beam ! Clean residual mean=0.000000 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.645394 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 131 components and 0.645394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061779Jy sigma=0.426336 ! Fit after self-cal, rms=0.061740Jy sigma=0.426030 wmodel J0310+3814_X_a_map.mod ! Writing 131 model components to file: J0310+3814_X_a_map.mod wobs J0310+3814_X_a_uvs.fits ! Writing UV FITS file: J0310+3814_X_a_uvs.fits wwins J0310+3814_X_a_map.win ! wwins: Wrote 5 windows to J0310+3814_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000175665 Jy ! Component: 100 - total flux cleaned = -0.000415452 Jy ! Component: 150 - total flux cleaned = -0.000750605 Jy ! Component: 200 - total flux cleaned = -0.00102678 Jy ! Component: 250 - total flux cleaned = -0.00124766 Jy ! Component: 300 - total flux cleaned = -0.00139184 Jy ! Component: 350 - total flux cleaned = -0.00143993 Jy ! Component: 400 - total flux cleaned = -0.00162731 Jy ! Component: 450 - total flux cleaned = -0.00176541 Jy ! Component: 500 - total flux cleaned = -0.00194698 Jy ! Component: 550 - total flux cleaned = -0.00205921 Jy ! Component: 600 - total flux cleaned = -0.00210359 Jy ! Component: 650 - total flux cleaned = -0.00216934 Jy ! Component: 700 - total flux cleaned = -0.00223453 Jy ! Component: 750 - total flux cleaned = -0.00227764 Jy ! Component: 800 - total flux cleaned = -0.00238386 Jy ! Component: 850 - total flux cleaned = -0.00236277 Jy ! Component: 900 - total flux cleaned = -0.00246691 Jy ! Component: 950 - total flux cleaned = -0.00244608 Jy ! Component: 1000 - total flux cleaned = -0.00246616 Jy ! Component: 1050 - total flux cleaned = -0.00248625 Jy ! Component: 1100 - total flux cleaned = -0.00248656 Jy ! Component: 1150 - total flux cleaned = -0.00252648 Jy ! Component: 1200 - total flux cleaned = -0.00250672 Jy ! Component: 1250 - total flux cleaned = -0.00254583 Jy ! Component: 1300 - total flux cleaned = -0.00258484 Jy ! Component: 1350 - total flux cleaned = -0.00246884 Jy ! Component: 1400 - total flux cleaned = -0.00244976 Jy ! Component: 1450 - total flux cleaned = -0.00246885 Jy ! Component: 1500 - total flux cleaned = -0.00246886 Jy ! Component: 1550 - total flux cleaned = -0.00245018 Jy ! Component: 1600 - total flux cleaned = -0.00245009 Jy ! Component: 1650 - total flux cleaned = -0.00241286 Jy ! Component: 1700 - total flux cleaned = -0.00243116 Jy ! Component: 1750 - total flux cleaned = -0.00232132 Jy ! Component: 1800 - total flux cleaned = -0.00232111 Jy ! Component: 1850 - total flux cleaned = -0.0022851 Jy ! Component: 1900 - total flux cleaned = -0.00221331 Jy ! Component: 1950 - total flux cleaned = -0.00228466 Jy ! Component: 2000 - total flux cleaned = -0.00228461 Jy ! Component: 2050 - total flux cleaned = -0.00221392 Jy ! Component: 2100 - total flux cleaned = -0.00216122 Jy ! Component: 2150 - total flux cleaned = -0.00216128 Jy ! Component: 2200 - total flux cleaned = -0.00219604 Jy ! Component: 2250 - total flux cleaned = -0.00212706 Jy ! Component: 2300 - total flux cleaned = -0.00210974 Jy ! Component: 2350 - total flux cleaned = -0.00210979 Jy ! Component: 2400 - total flux cleaned = -0.0021096 Jy ! Component: 2450 - total flux cleaned = -0.0021097 Jy ! Component: 2500 - total flux cleaned = -0.00202578 Jy ! Component: 2550 - total flux cleaned = -0.0019923 Jy ! Component: 2600 - total flux cleaned = -0.00200908 Jy ! Component: 2650 - total flux cleaned = -0.00195949 Jy ! Component: 2700 - total flux cleaned = -0.00195941 Jy ! Component: 2750 - total flux cleaned = -0.00194298 Jy ! Component: 2800 - total flux cleaned = -0.00189409 Jy ! Component: 2850 - total flux cleaned = -0.00178022 Jy ! Component: 2900 - total flux cleaned = -0.00187728 Jy ! Component: 2950 - total flux cleaned = -0.00190953 Jy ! Component: 3000 - total flux cleaned = -0.00179718 Jy ! Component: 3050 - total flux cleaned = -0.00178116 Jy ! Component: 3100 - total flux cleaned = -0.00179714 Jy ! Component: 3150 - total flux cleaned = -0.00174958 Jy ! Component: 3200 - total flux cleaned = -0.00171804 Jy ! Component: 3250 - total flux cleaned = -0.00167087 Jy ! Component: 3300 - total flux cleaned = -0.00157707 Jy ! Component: 3350 - total flux cleaned = -0.00156146 Jy ! Component: 3400 - total flux cleaned = -0.00156154 Jy ! Component: 3450 - total flux cleaned = -0.00149973 Jy ! Component: 3500 - total flux cleaned = -0.00146908 Jy ! Component: 3550 - total flux cleaned = -0.00142319 Jy ! Component: 3600 - total flux cleaned = -0.00146898 Jy ! Component: 3650 - total flux cleaned = -0.00142329 Jy ! Component: 3700 - total flux cleaned = -0.00139298 Jy ! Component: 3750 - total flux cleaned = -0.00140801 Jy ! Component: 3800 - total flux cleaned = -0.00137795 Jy ! Component: 3850 - total flux cleaned = -0.001378 Jy ! Component: 3900 - total flux cleaned = -0.0012736 Jy ! Component: 3950 - total flux cleaned = -0.00128843 Jy ! Component: 4000 - total flux cleaned = -0.00124405 Jy ! Component: 4050 - total flux cleaned = -0.00117045 Jy ! Total flux subtracted in 4096 components = -0.0011263 Jy ! Clean residual min=-0.000816 max=0.000829 Jy/beam ! Clean residual mean=0.000000 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.644268 Jy keep ! Adding 361 model components to the UV plane model. ! The established model now contains 492 components and 0.644268 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J0310+3814_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8979 x 1.819 at -3.484 degrees (North through East) ! Clean map min=-0.0013176 max=0.5969 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J0310+3814_X_a_map.fits wmodel /image_prod/ug002_uvm//J0310+3814_X_a_map.mod ! Writing 492 model components to file: /image_prod/ug002_uvm//J0310+3814_X_a_map.mod wobs /image_prod/ug002_uvm//J0310+3814_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J0310+3814_X_a_uvs.fits wwins /image_prod/ug002_uvm//J0310+3814_X_a_map.win ! wwins: Wrote 6 windows to /image_prod/ug002_uvm//J0310+3814_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.596901 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000254855 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.128089 0.128089 0.256178 0.512356 1.02471 2.04943 4.09885 8.1977 16.3954 32.7908 65.5816 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.596 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2342.12 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J0310+3814_X_a_dfm.log closed on Wed Mar 4 16:33:53 2020