! Started logfile: /image_prod/ug002_uvm//J0231+6250_X_a_dfm.log on Wed Mar 4 16:31:10 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J0231+6250_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J0231+6250_X_a_uvm.fits ! AN table 1: 200 integrations on 36 of 36 possible baselines. ! AN table 2: 113 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.82437 visibilities/baseline/integration-bin. ! Found source: J0231+6250 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 111468 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0231+6250_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 200 telescope corrections were flagged in sub-array 1. ! A total of 151 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 200 telescope corrections were flagged in sub-array 1. ! A total of 151 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 200 telescope corrections were flagged in sub-array 1. ! A total of 151 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 200 telescope corrections were flagged in sub-array 1. ! A total of 151 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 200 telescope corrections were flagged in sub-array 1. ! A total of 151 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 200 telescope corrections were flagged in sub-array 1. ! A total of 151 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 200 telescope corrections were flagged in sub-array 1. ! A total of 151 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 200 telescope corrections were flagged in sub-array 1. ! A total of 151 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 200 telescope corrections were flagged in sub-array 1. ! A total of 151 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 200 telescope corrections were flagged in sub-array 1. ! A total of 151 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 200 telescope corrections were flagged in sub-array 1. ! A total of 151 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 200 telescope corrections were flagged in sub-array 1. ! A total of 151 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.001408Jy sigma=9.674535 ! Fit after self-cal, rms=0.964717Jy sigma=9.315425 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7214 mas, bmaj=1.395 mas, bpa=11.35 degrees ! Estimated noise=0.600716 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0231033 Jy ! Component: 100 - total flux cleaned = 0.0310567 Jy ! Total flux subtracted in 100 components = 0.0310567 Jy ! Clean residual min=-0.002057 max=0.004644 Jy/beam ! Clean residual mean=-0.000003 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.0310567 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0310567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053046Jy sigma=0.491866 ! Fit after self-cal, rms=0.051867Jy sigma=0.480497 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00671243 Jy ! Component: 100 - total flux cleaned = 0.0115347 Jy ! Total flux subtracted in 100 components = 0.0115347 Jy ! Clean residual min=-0.001873 max=0.003496 Jy/beam ! Clean residual mean=-0.000001 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.0425914 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 25 components and 0.0425914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050008Jy sigma=0.458820 ! Fit after self-cal, rms=0.049991Jy sigma=0.458421 ! Inverting map ! Added new window around map position (1, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00426011 Jy ! Component: 100 - total flux cleaned = 0.00736276 Jy ! Total flux subtracted in 100 components = 0.00736276 Jy ! Clean residual min=-0.001640 max=0.002348 Jy/beam ! Clean residual mean=-0.000001 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.0499541 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 41 components and 0.0499541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049271Jy sigma=0.450029 ! Fit after self-cal, rms=0.049251Jy sigma=0.449754 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00287854 Jy ! Component: 100 - total flux cleaned = 0.00500528 Jy ! Total flux subtracted in 100 components = 0.00500528 Jy ! Clean residual min=-0.001556 max=0.001788 Jy/beam ! Clean residual mean=0.000000 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.0549594 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 43 components and 0.0549594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048932Jy sigma=0.446077 ! Fit after self-cal, rms=0.048923Jy sigma=0.445952 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.023 mas, bmaj=1.782 mas, bpa=12.85 degrees ! Estimated noise=0.230351 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00346325 Jy ! Component: 100 - total flux cleaned = 0.00550108 Jy ! Component: 150 - total flux cleaned = 0.00684857 Jy ! Component: 200 - total flux cleaned = 0.00776471 Jy ! Total flux subtracted in 200 components = 0.00776471 Jy ! Clean residual min=-0.000755 max=0.001035 Jy/beam ! Clean residual mean=0.000003 rms=0.000184 Jy/beam ! Combined flux in latest and established models = 0.0627241 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 60 components and 0.0627241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048673Jy sigma=0.443191 ! Fit after self-cal, rms=0.048655Jy sigma=0.442997 ! Inverting map ! Added new window around map position (-0.2, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111512 Jy ! Component: 100 - total flux cleaned = 0.00182175 Jy ! Component: 150 - total flux cleaned = 0.00231809 Jy ! Component: 200 - total flux cleaned = 0.00247149 Jy ! Total flux subtracted in 200 components = 0.00247149 Jy ! Clean residual min=-0.000779 max=0.000768 Jy/beam ! Clean residual mean=0.000003 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 0.0651956 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 78 components and 0.0651956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048624Jy sigma=0.442713 ! Fit after self-cal, rms=0.048619Jy sigma=0.442663 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.023 x 1.782 at 12.85 degrees (North through East) ! Clean map min=-0.00070597 max=0.034537 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.05 HN 1.11 KP 1.08 ! LA 1.04 MK 1.16 OV 0.95 PT 0.93 ! SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.12 FD 1.03 HN 1.01 KP 0.99 ! LA 1.00* NL 1.03 OV 1.03 PT 0.98 ! SC 0.90 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.04 HN 1.07 KP 1.04 ! LA 1.03 MK 1.10 OV 0.95 PT 0.95 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 1.03 HN 1.01 KP 0.97 ! LA 1.00* NL 1.00 OV 1.03 PT 0.98 ! SC 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 HN 1.05 KP 1.02 ! LA 1.05 MK 1.08 OV 0.94 PT 0.93 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.04 HN 1.09 KP 0.99 ! LA 1.00* NL 0.98 OV 1.07 PT 0.95 ! SC 0.88 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.07 HN 1.07 KP 1.02 ! LA 1.04 MK 1.12 OV 0.95 PT 0.95 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.03 HN 1.10 KP 0.98 ! LA 1.00* NL 1.03 OV 1.02 PT 0.99 ! SC 0.83 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.04 HN 0.97 KP 1.04 ! LA 1.04 MK 1.09 OV 0.99 PT 0.93 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.99 HN 1.03 KP 0.98 ! LA 1.00* NL 1.01 OV 1.09 PT 0.88 ! SC 0.83 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 HN 0.99 KP 1.04 ! LA 1.01 MK 1.03 OV 0.94 PT 0.96 ! SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.02 HN 1.05 KP 0.95 ! LA 1.00* NL 1.03 OV 1.04 PT 0.99 ! SC 0.81 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.05 HN 0.95 KP 1.01 ! LA 1.07 MK 0.99 OV 0.92 PT 0.96 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.03 HN 1.05 KP 0.95 ! LA 1.00* NL 1.03 OV 1.10 PT 0.94 ! SC 0.79 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.08 HN 0.88 KP 1.08 ! LA 1.05 MK 1.07 OV 0.95 PT 0.93 ! SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.98 HN 1.05 KP 1.03 ! LA 1.00* NL 1.01 OV 1.04 PT 0.96 ! SC 0.89 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 0.93 KP 1.08 ! LA 1.02 MK 0.98 OV 0.92 PT 0.91 ! SC 0.87 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.00 HN 1.02 KP 1.02 ! LA 1.00* NL 1.01 OV 1.02 PT 0.95 ! SC 0.80 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 0.88 KP 1.02 ! LA 1.04 MK 0.98 OV 0.94 PT 0.94 ! SC 0.86 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.98 HN 0.93 KP 0.95 ! LA 1.00* NL 1.03 OV 1.05 PT 1.01 ! SC 0.86 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.02 HN 0.87 KP 1.04 ! LA 1.02 MK 0.89 OV 0.94 PT 0.95 ! SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.04 HN 0.97 KP 0.97 ! LA 1.00* NL 0.97 OV 1.02 PT 1.02 ! SC 0.70 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.85 KP 1.05 ! LA 1.01 MK 0.93 OV 0.94 PT 0.91 ! SC 0.85 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.98 HN 0.93 KP 1.01 ! LA 1.00* NL 1.08 OV 1.02 PT 0.96 ! SC 0.77 ! ! ! Fit before self-cal, rms=0.048619Jy sigma=0.442663 ! Fit after self-cal, rms=0.047090Jy sigma=0.441630 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.005 mas, bmaj=1.775 mas, bpa=13.29 degrees ! Estimated noise=0.227723 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000337267 Jy ! Component: 100 - total flux cleaned = 0.000461134 Jy ! Component: 150 - total flux cleaned = 0.000531231 Jy ! Component: 200 - total flux cleaned = 0.000566124 Jy ! Total flux subtracted in 200 components = 0.000566124 Jy ! Clean residual min=-0.000537 max=0.000534 Jy/beam ! Clean residual mean=0.000001 rms=0.000124 Jy/beam ! Combined flux in latest and established models = 0.0657617 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 85 components and 0.0657617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.047078Jy sigma=0.441529 ! Fit after self-cal, rms=0.047071Jy sigma=0.441387 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.047071Jy sigma=0.441387 ! Fit after self-cal, rms=0.046505Jy sigma=0.440693 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.005 mas, bmaj=1.737 mas, bpa=13.5 degrees ! Estimated noise=0.224724 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000213632 Jy ! Component: 100 - total flux cleaned = 0.00034887 Jy ! Component: 150 - total flux cleaned = 0.000433383 Jy ! Component: 200 - total flux cleaned = 0.000502082 Jy ! Total flux subtracted in 200 components = 0.000502082 Jy ! Clean residual min=-0.000425 max=0.000449 Jy/beam ! Clean residual mean=0.000002 rms=0.000109 Jy/beam ! Combined flux in latest and established models = 0.0662638 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 92 components and 0.0662638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.046495Jy sigma=0.440628 ! Fit after self-cal, rms=0.046509Jy sigma=0.440550 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.65635e-05 Jy ! Component: 100 - total flux cleaned = 0.00011485 Jy ! Component: 150 - total flux cleaned = 0.000114919 Jy ! Component: 200 - total flux cleaned = 0.000114827 Jy ! Total flux subtracted in 200 components = 0.000114827 Jy ! Clean residual min=-0.000439 max=0.000461 Jy/beam ! Clean residual mean=0.000002 rms=0.000110 Jy/beam ! Combined flux in latest and established models = 0.0663786 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 98 components and 0.0663786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.046505Jy sigma=0.440528 ! Fit after self-cal, rms=0.046504Jy sigma=0.440511 ! Inverting map ! Added new window around map position (-4.4, -5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000363299 Jy ! Component: 100 - total flux cleaned = 0.00040817 Jy ! Component: 150 - total flux cleaned = 0.000432521 Jy ! Component: 200 - total flux cleaned = 0.000462503 Jy ! Total flux subtracted in 200 components = 0.000462503 Jy ! Clean residual min=-0.000449 max=0.000450 Jy/beam ! Clean residual mean=0.000001 rms=0.000109 Jy/beam ! Combined flux in latest and established models = 0.0668411 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 110 components and 0.0668411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.046499Jy sigma=0.440475 ! Fit after self-cal, rms=0.046498Jy sigma=0.440464 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.046498Jy sigma=0.440464 ! Fit after self-cal, rms=0.045948Jy sigma=0.440365 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9987 mas, bmaj=1.719 mas, bpa=13.74 degrees ! Estimated noise=0.2218 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.17532e-05 Jy ! Component: 100 - total flux cleaned = 0.000167514 Jy ! Component: 150 - total flux cleaned = 0.000281904 Jy ! Component: 200 - total flux cleaned = 0.000348504 Jy ! Total flux subtracted in 200 components = 0.000348504 Jy ! Clean residual min=-0.000433 max=0.000433 Jy/beam ! Clean residual mean=0.000001 rms=0.000103 Jy/beam ! Combined flux in latest and established models = 0.0671896 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 117 components and 0.0671896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.045943Jy sigma=0.440331 ! Fit after self-cal, rms=0.045946Jy sigma=0.440311 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00011594 Jy ! Component: 100 - total flux cleaned = 0.000186703 Jy ! Component: 150 - total flux cleaned = 0.00022215 Jy ! Component: 200 - total flux cleaned = 0.000248661 Jy ! Total flux subtracted in 200 components = 0.000248661 Jy ! Clean residual min=-0.000437 max=0.000425 Jy/beam ! Clean residual mean=0.000001 rms=0.000103 Jy/beam ! Combined flux in latest and established models = 0.0674383 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 123 components and 0.0674383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.045944Jy sigma=0.440292 ! Fit after self-cal, rms=0.045943Jy sigma=0.440287 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.045943Jy sigma=0.440287 ! Fit after self-cal, rms=0.045502Jy sigma=0.440267 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.285 mas, bmaj=2.843 mas, bpa=35.77 degrees ! Estimated noise=0.279159 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000288348 Jy ! Component: 100 - total flux cleaned = 0.000391908 Jy ! Component: 150 - total flux cleaned = 0.000429847 Jy ! Component: 200 - total flux cleaned = 0.000450155 Jy ! Total flux subtracted in 200 components = 0.000450155 Jy ! Clean residual min=-0.000557 max=0.000409 Jy/beam ! Clean residual mean=0.000002 rms=0.000120 Jy/beam ! Combined flux in latest and established models = 0.0678884 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 135 components and 0.0678884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.045500Jy sigma=0.440256 ! Fit after self-cal, rms=0.045501Jy sigma=0.440251 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.50144e-05 Jy ! Component: 100 - total flux cleaned = 8.71047e-05 Jy ! Component: 150 - total flux cleaned = 9.78471e-05 Jy ! Component: 200 - total flux cleaned = 0.000104364 Jy ! Total flux subtracted in 200 components = 0.000104364 Jy ! Clean residual min=-0.000549 max=0.000406 Jy/beam ! Clean residual mean=0.000002 rms=0.000120 Jy/beam ! Combined flux in latest and established models = 0.0679928 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 144 components and 0.0679928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.045500Jy sigma=0.440242 ! Fit after self-cal, rms=0.045500Jy sigma=0.440240 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9936 mas, bmaj=1.711 mas, bpa=13.94 degrees ! Estimated noise=0.219729 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9936 x 1.711 at 13.94 degrees (North through East) ! Clean map min=-0.0004092 max=0.032474 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7097 mas, bmaj=1.35 mas, bpa=12.34 degrees ! Estimated noise=0.552096 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0220579 Jy ! Component: 100 - total flux cleaned = 0.0318597 Jy ! Component: 150 - total flux cleaned = 0.0390948 Jy ! Component: 200 - total flux cleaned = 0.0445425 Jy ! Total flux subtracted in 200 components = 0.0445425 Jy ! Clean residual min=-0.001795 max=0.003187 Jy/beam ! Clean residual mean=-0.000002 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.0445425 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.0445425 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9936 mas, bmaj=1.711 mas, bpa=13.94 degrees ! Estimated noise=0.219729 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00795521 Jy ! Component: 100 - total flux cleaned = 0.0126259 Jy ! Component: 150 - total flux cleaned = 0.0156444 Jy ! Component: 200 - total flux cleaned = 0.0176972 Jy ! Total flux subtracted in 200 components = 0.0176972 Jy ! Clean residual min=-0.000590 max=0.001193 Jy/beam ! Clean residual mean=0.000001 rms=0.000159 Jy/beam ! Combined flux in latest and established models = 0.0622397 Jy ! Adding 73 model components to the UV plane model. ! The established model now contains 81 components and 0.0622397 Jy ! Inverting map ! Added new window around map position (1.6, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145733 Jy ! Component: 100 - total flux cleaned = 0.00250586 Jy ! Component: 150 - total flux cleaned = 0.00329938 Jy ! Component: 200 - total flux cleaned = 0.0039157 Jy ! Total flux subtracted in 200 components = 0.0039157 Jy ! Clean residual min=-0.000433 max=0.000472 Jy/beam ! Clean residual mean=0.000001 rms=0.000109 Jy/beam ! Combined flux in latest and established models = 0.0661554 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 97 components and 0.0661554 Jy ! Inverting map ! Added new window around map position (18.4, 29.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000517511 Jy ! Component: 100 - total flux cleaned = 0.000750695 Jy ! Component: 150 - total flux cleaned = 0.00093803 Jy ! Component: 200 - total flux cleaned = 0.00109023 Jy ! Total flux subtracted in 200 components = 0.00109023 Jy ! Clean residual min=-0.000430 max=0.000419 Jy/beam ! Clean residual mean=0.000001 rms=0.000102 Jy/beam ! Combined flux in latest and established models = 0.0672456 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 115 components and 0.0672456 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.285 mas, bmaj=2.843 mas, bpa=35.77 degrees ! Estimated noise=0.279159 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000371135 Jy ! Component: 100 - total flux cleaned = 0.000502257 Jy ! Component: 150 - total flux cleaned = 0.000547454 Jy ! Component: 200 - total flux cleaned = 0.000572011 Jy ! Total flux subtracted in 200 components = 0.000572011 Jy ! Clean residual min=-0.000565 max=0.000402 Jy/beam ! Clean residual mean=0.000003 rms=0.000118 Jy/beam ! Combined flux in latest and established models = 0.0678177 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.91075e-05 Jy ! Component: 100 - total flux cleaned = 4.88026e-05 Jy ! Component: 150 - total flux cleaned = 6.09652e-05 Jy ! Component: 200 - total flux cleaned = 8.35508e-05 Jy ! Total flux subtracted in 200 components = 8.35508e-05 Jy ! Clean residual min=-0.000554 max=0.000399 Jy/beam ! Clean residual mean=0.000002 rms=0.000116 Jy/beam ! Combined flux in latest and established models = 0.0679012 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 144 components and 0.0679012 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9936 mas, bmaj=1.711 mas, bpa=13.94 degrees ! Estimated noise=0.219729 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.65091e-05 Jy ! Component: 100 - total flux cleaned = -1.69542e-05 Jy ! Component: 150 - total flux cleaned = -3.3425e-05 Jy ! Component: 200 - total flux cleaned = -5.58361e-05 Jy ! Total flux subtracted in 200 components = -5.58361e-05 Jy ! Clean residual min=-0.000404 max=0.000392 Jy/beam ! Clean residual mean=0.000001 rms=0.000097 Jy/beam ! Combined flux in latest and established models = 0.0678454 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 158 components and 0.0678454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.045493Jy sigma=0.440202 ! Fit after self-cal, rms=0.045487Jy sigma=0.440131 wmodel J0231+6250_X_a_map.mod ! Writing 158 model components to file: J0231+6250_X_a_map.mod wobs J0231+6250_X_a_uvs.fits ! Writing UV FITS file: J0231+6250_X_a_uvs.fits wwins J0231+6250_X_a_map.win ! wwins: Wrote 6 windows to J0231+6250_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 2.0168e-05 Jy ! Component: 100 - total flux cleaned = 9.90546e-05 Jy ! Component: 150 - total flux cleaned = 0.000167763 Jy ! Component: 200 - total flux cleaned = 0.000228108 Jy ! Component: 250 - total flux cleaned = 0.000280599 Jy ! Component: 300 - total flux cleaned = 0.000332028 Jy ! Component: 350 - total flux cleaned = 0.000369956 Jy ! Component: 400 - total flux cleaned = 0.000426041 Jy ! Component: 450 - total flux cleaned = 0.000456767 Jy ! Component: 500 - total flux cleaned = 0.000493095 Jy ! Component: 550 - total flux cleaned = 0.000522938 Jy ! Component: 600 - total flux cleaned = 0.000540681 Jy ! Component: 650 - total flux cleaned = 0.000552423 Jy ! Component: 700 - total flux cleaned = 0.000569861 Jy ! Component: 750 - total flux cleaned = 0.000598358 Jy ! Component: 800 - total flux cleaned = 0.00058713 Jy ! Component: 850 - total flux cleaned = 0.000609525 Jy ! Component: 900 - total flux cleaned = 0.000637163 Jy ! Component: 950 - total flux cleaned = 0.000642629 Jy ! Component: 1000 - total flux cleaned = 0.000658918 Jy ! Component: 1050 - total flux cleaned = 0.000680355 Jy ! Component: 1100 - total flux cleaned = 0.000706978 Jy ! Component: 1150 - total flux cleaned = 0.000712227 Jy ! Component: 1200 - total flux cleaned = 0.000722719 Jy ! Component: 1250 - total flux cleaned = 0.000748662 Jy ! Component: 1300 - total flux cleaned = 0.000758899 Jy ! Component: 1350 - total flux cleaned = 0.000784374 Jy ! Component: 1400 - total flux cleaned = 0.000784356 Jy ! Component: 1450 - total flux cleaned = 0.00080442 Jy ! Component: 1500 - total flux cleaned = 0.000814457 Jy ! Component: 1550 - total flux cleaned = 0.000858962 Jy ! Component: 1600 - total flux cleaned = 0.000863831 Jy ! Component: 1650 - total flux cleaned = 0.000888195 Jy ! Component: 1700 - total flux cleaned = 0.000893005 Jy ! Component: 1750 - total flux cleaned = 0.000926697 Jy ! Component: 1800 - total flux cleaned = 0.000945859 Jy ! Component: 1850 - total flux cleaned = 0.000969709 Jy ! Component: 1900 - total flux cleaned = 0.000974458 Jy ! Component: 1950 - total flux cleaned = 0.00101203 Jy ! Component: 2000 - total flux cleaned = 0.00100731 Jy ! Component: 2050 - total flux cleaned = 0.00103982 Jy ! Component: 2100 - total flux cleaned = 0.00106753 Jy ! Component: 2150 - total flux cleaned = 0.00107675 Jy ! Component: 2200 - total flux cleaned = 0.00112238 Jy ! Component: 2250 - total flux cleaned = 0.00111783 Jy ! Component: 2300 - total flux cleaned = 0.00110883 Jy ! Component: 2350 - total flux cleaned = 0.00112686 Jy ! Component: 2400 - total flux cleaned = 0.00115818 Jy ! Component: 2450 - total flux cleaned = 0.00118931 Jy ! Component: 2500 - total flux cleaned = 0.00119816 Jy ! Component: 2550 - total flux cleaned = 0.00120695 Jy ! Component: 2600 - total flux cleaned = 0.00121571 Jy ! Component: 2650 - total flux cleaned = 0.00122442 Jy ! Component: 2700 - total flux cleaned = 0.00125917 Jy ! Component: 2750 - total flux cleaned = 0.00124621 Jy ! Component: 2800 - total flux cleaned = 0.00129346 Jy ! Component: 2850 - total flux cleaned = 0.00129347 Jy ! Component: 2900 - total flux cleaned = 0.00131048 Jy ! Component: 2950 - total flux cleaned = 0.0013317 Jy ! Component: 3000 - total flux cleaned = 0.00134433 Jy ! Component: 3050 - total flux cleaned = 0.00135274 Jy ! Component: 3100 - total flux cleaned = 0.00134854 Jy ! Component: 3150 - total flux cleaned = 0.00138602 Jy ! Component: 3200 - total flux cleaned = 0.00140262 Jy ! Component: 3250 - total flux cleaned = 0.00141498 Jy ! Component: 3300 - total flux cleaned = 0.00139851 Jy ! Component: 3350 - total flux cleaned = 0.00141899 Jy ! Component: 3400 - total flux cleaned = 0.00140679 Jy ! Component: 3450 - total flux cleaned = 0.00144338 Jy ! Component: 3500 - total flux cleaned = 0.00144743 Jy ! Component: 3550 - total flux cleaned = 0.00148371 Jy ! Component: 3600 - total flux cleaned = 0.00147163 Jy ! Component: 3650 - total flux cleaned = 0.00147162 Jy ! Component: 3700 - total flux cleaned = 0.00148358 Jy ! Component: 3750 - total flux cleaned = 0.00149151 Jy ! Component: 3800 - total flux cleaned = 0.0015034 Jy ! Component: 3850 - total flux cleaned = 0.0015113 Jy ! Component: 3900 - total flux cleaned = 0.00149952 Jy ! Component: 3950 - total flux cleaned = 0.00150342 Jy ! Component: 4000 - total flux cleaned = 0.00151121 Jy ! Component: 4050 - total flux cleaned = 0.00151897 Jy ! Total flux subtracted in 4096 components = 0.00153056 Jy ! Clean residual min=-0.000204 max=0.000194 Jy/beam ! Clean residual mean=0.000001 rms=0.000069 Jy/beam ! Combined flux in latest and established models = 0.069376 Jy keep ! Adding 341 model components to the UV plane model. ! The established model now contains 499 components and 0.069376 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J0231+6250_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9936 x 1.711 at 13.94 degrees (North through East) ! Clean map min=-0.00033526 max=0.03231 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J0231+6250_X_a_map.fits wmodel /image_prod/ug002_uvm//J0231+6250_X_a_map.mod ! Writing 499 model components to file: /image_prod/ug002_uvm//J0231+6250_X_a_map.mod wobs /image_prod/ug002_uvm//J0231+6250_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J0231+6250_X_a_uvs.fits wwins /image_prod/ug002_uvm//J0231+6250_X_a_map.win ! wwins: Wrote 7 windows to /image_prod/ug002_uvm//J0231+6250_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0323102 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 6.90281e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.640926 0.640926 1.28185 2.5637 5.12741 10.2548 20.5096 41.0193 82.0385 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.032 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 468.072 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J0231+6250_X_a_dfm.log closed on Wed Mar 4 16:31:23 2020