! Started logfile: /image_prod/ug002_uvm//J0205+3212_S_a_dfm.log on Wed Mar  4 16:30:38 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uvm//J0205+3212_S_a_uvm.fits
! Reading UV FITS file: /image_prod/ug002_uvm//J0205+3212_S_a_uvm.fits
! AN table 1: 21 integrations on 45 of 45 possible baselines.
! AN table 2: 20 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.729129 visibilities/baseline/integration-bin.
! Found source: J0205+3212
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 3642 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0205+3212_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 30 telescope corrections were flagged in sub-array 1.
!  A total of 39 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 30 telescope corrections were flagged in sub-array 1.
!  A total of 39 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 30 telescope corrections were flagged in sub-array 1.
!  A total of 39 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.415190Jy  sigma=7.682240
! Fit after  self-cal, rms=0.250860Jy  sigma=1.549438
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.848 mas, bmaj=5.314 mas, bpa=-10.67 degrees
! Estimated noise=2.8121 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.762267 Jy
! Component: 100  -  total flux cleaned = 0.928793 Jy
! Total flux subtracted in 100 components = 0.928793 Jy
! Clean residual min=-0.039623 max=0.090136 Jy/beam
! Clean residual mean=-0.000018 rms=0.010669 Jy/beam
! Combined flux in latest and established models = 0.928793 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.928793 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.261692Jy  sigma=1.552450
! Fit after  self-cal, rms=0.261688Jy  sigma=1.552409
! Inverting map 
! Added new window around map position (-2, 8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.08297 Jy
! Component: 100  -  total flux cleaned = 0.132821 Jy
! Total flux subtracted in 100 components = 0.132821 Jy
! Clean residual min=-0.032760 max=0.045115 Jy/beam
! Clean residual mean=-0.000003 rms=0.009150 Jy/beam
! Combined flux in latest and established models = 1.06161 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 17 components and 1.06161 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.226828Jy  sigma=1.357699
! Fit after  self-cal, rms=0.225238Jy  sigma=1.349607
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.404 mas, bmaj=6.296 mas, bpa=-8.423 degrees
! Estimated noise=2.19922 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.054823 Jy
! Component: 100  -  total flux cleaned = 0.0887228 Jy
! Component: 150  -  total flux cleaned = 0.112113 Jy
! Component: 200  -  total flux cleaned = 0.128739 Jy
! Total flux subtracted in 200 components = 0.128739 Jy
! Clean residual min=-0.028860 max=0.045214 Jy/beam
! Clean residual mean=0.000041 rms=0.008743 Jy/beam
! Combined flux in latest and established models = 1.19035 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 42 components and 1.19035 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.211733Jy  sigma=1.256140
! Fit after  self-cal, rms=0.211153Jy  sigma=1.251762
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.404 x 6.296 at -8.423 degrees (North through East)
! Clean map  min=-0.030616  max=0.97604 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        0.96     KP        0.92     
!   LA        0.98     MK        1.05     NL        0.92     OV        0.95     
!   PT        0.98     SC        0.92     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.99     FD        1.01     HN        0.94     KP        1.00     
!   LA        0.99     MK        1.07     OV        0.97     PT        1.01     
!   SC        0.94     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        2.44     FD        0.97     HN        0.97     KP        0.89     
!   LA        0.95     MK        1.07     NL        0.97     OV        0.96     
!   PT        0.99     SC        0.81     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.31     FD        0.98     HN        0.95     KP        0.96     
!   LA        0.98     MK        1.03     OV        0.96     PT        1.02     
!   SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.33     FD        0.97     HN        0.99     KP        0.88     
!   LA        0.96     MK        1.07     NL        0.94     OV        0.95     
!   PT        0.97     SC        0.92     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.94     FD        1.00     HN        0.96     KP        0.96     
!   LA        0.99     MK        1.08     OV        0.95     PT        1.00     
!   SC        0.93     
! 
! 
! Fit before self-cal, rms=0.211153Jy  sigma=1.251762
! Fit after  self-cal, rms=0.154421Jy  sigma=0.698807
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.402 mas, bmaj=6.343 mas, bpa=-7.881 degrees
! Estimated noise=2.2048 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0226605 Jy
! Component: 100  -  total flux cleaned = -0.0276938 Jy
! Component: 150  -  total flux cleaned = -0.0297194 Jy
! Component: 200  -  total flux cleaned = -0.0310999 Jy
! Total flux subtracted in 200 components = -0.0310999 Jy
! Clean residual min=-0.017651 max=0.019817 Jy/beam
! Clean residual mean=0.000033 rms=0.004279 Jy/beam
! Combined flux in latest and established models = 1.15925 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 54 components and 1.15925 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.150196Jy  sigma=0.674500
! Fit after  self-cal, rms=0.149878Jy  sigma=0.672669
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.149878Jy  sigma=0.672669
! Fit after  self-cal, rms=0.095573Jy  sigma=0.389188
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.386 mas, bmaj=6.364 mas, bpa=-8.521 degrees
! Estimated noise=2.2016 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0120528 Jy
! Component: 100  -  total flux cleaned = -0.0131586 Jy
! Component: 150  -  total flux cleaned = -0.0134399 Jy
! Component: 200  -  total flux cleaned = -0.013679 Jy
! Total flux subtracted in 200 components = -0.013679 Jy
! Clean residual min=-0.009760 max=0.009413 Jy/beam
! Clean residual mean=0.000030 rms=0.001820 Jy/beam
! Combined flux in latest and established models = 1.14557 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 63 components and 1.14557 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092440Jy  sigma=0.371368
! Fit after  self-cal, rms=0.092366Jy  sigma=0.370310
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-22.5, 18.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00952297 Jy
! Component: 100  -  total flux cleaned = 0.0112679 Jy
! Component: 150  -  total flux cleaned = 0.0129536 Jy
! Component: 200  -  total flux cleaned = 0.0140785 Jy
! Total flux subtracted in 200 components = 0.0140785 Jy
! Clean residual min=-0.008314 max=0.007327 Jy/beam
! Clean residual mean=0.000017 rms=0.001573 Jy/beam
! Combined flux in latest and established models = 1.15965 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 87 components and 1.15965 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090931Jy  sigma=0.360608
! Fit after  self-cal, rms=0.090820Jy  sigma=0.360145
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090820Jy  sigma=0.360145
! Fit after  self-cal, rms=0.090413Jy  sigma=0.354989
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.384 mas, bmaj=6.363 mas, bpa=-8.625 degrees
! Estimated noise=2.20062 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00594463 Jy
! Component: 100  -  total flux cleaned = -0.00506273 Jy
! Component: 150  -  total flux cleaned = -0.00391341 Jy
! Component: 200  -  total flux cleaned = -0.00257032 Jy
! Total flux subtracted in 200 components = -0.00257032 Jy
! Clean residual min=-0.006514 max=0.007388 Jy/beam
! Clean residual mean=0.000018 rms=0.001361 Jy/beam
! Combined flux in latest and established models = 1.15708 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 96 components and 1.15708 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089269Jy  sigma=0.348018
! Fit after  self-cal, rms=0.089204Jy  sigma=0.347752
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-7, 15).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00736444 Jy
! Component: 100  -  total flux cleaned = 0.00862362 Jy
! Component: 150  -  total flux cleaned = 0.0106012 Jy
! Component: 200  -  total flux cleaned = 0.0120891 Jy
! Total flux subtracted in 200 components = 0.0120891 Jy
! Clean residual min=-0.005817 max=0.005910 Jy/beam
! Clean residual mean=0.000010 rms=0.001187 Jy/beam
! Combined flux in latest and established models = 1.16917 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 117 components and 1.16917 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088323Jy  sigma=0.341868
! Fit after  self-cal, rms=0.088255Jy  sigma=0.341391
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088255Jy  sigma=0.341391
! Fit after  self-cal, rms=0.088277Jy  sigma=0.339344
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.506 mas, bmaj=9.741 mas, bpa=-6.313 degrees
! Estimated noise=2.7647 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00544359 Jy
! Component: 100  -  total flux cleaned = 0.00667055 Jy
! Component: 150  -  total flux cleaned = 0.00731867 Jy
! Component: 200  -  total flux cleaned = 0.00792645 Jy
! Total flux subtracted in 200 components = 0.00792645 Jy
! Clean residual min=-0.004120 max=0.006387 Jy/beam
! Clean residual mean=0.000014 rms=0.001291 Jy/beam
! Combined flux in latest and established models = 1.1771 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 144 components and 1.1771 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087946Jy  sigma=0.336878
! Fit after  self-cal, rms=0.087921Jy  sigma=0.336608
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-33.5, 17).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00515605 Jy
! Component: 100  -  total flux cleaned = 0.00619727 Jy
! Component: 150  -  total flux cleaned = 0.00676242 Jy
! Component: 200  -  total flux cleaned = 0.00726462 Jy
! Total flux subtracted in 200 components = 0.00726462 Jy
! Clean residual min=-0.003941 max=0.003789 Jy/beam
! Clean residual mean=0.000005 rms=0.001102 Jy/beam
! Combined flux in latest and established models = 1.18436 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 180 components and 1.18436 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087571Jy  sigma=0.334946
! Fit after  self-cal, rms=0.087533Jy  sigma=0.334703
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.384 mas, bmaj=6.365 mas, bpa=-8.726 degrees
! Estimated noise=2.19985 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.384 x 6.365 at -8.726 degrees (North through East)
! Clean map  min=-0.0040364  max=0.97865 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087533Jy  sigma=0.334703
! Fit after  self-cal, rms=0.084836Jy  sigma=0.305668
! Inverting map and beam 
! Estimated beam: bmin=3.385 mas, bmaj=6.371 mas, bpa=-8.776 degrees
! Estimated noise=2.19857 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000176194 Jy
! Component: 100  -  total flux cleaned = 0.000678145 Jy
! Component: 150  -  total flux cleaned = 0.00130454 Jy
! Component: 200  -  total flux cleaned = 0.00196292 Jy
! Total flux subtracted in 200 components = 0.00196292 Jy
! Clean residual min=-0.003628 max=0.003744 Jy/beam
! Clean residual mean=0.000006 rms=0.000858 Jy/beam
! Combined flux in latest and established models = 1.18633 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 195 components and 1.18633 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084334Jy  sigma=0.302579
! Fit after  self-cal, rms=0.084297Jy  sigma=0.302445
! Inverting map 
! Added new window around map position (29, -104.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00193903 Jy
! Component: 100  -  total flux cleaned = 0.00265528 Jy
! Component: 150  -  total flux cleaned = 0.00303747 Jy
! Component: 200  -  total flux cleaned = 0.00339803 Jy
! Total flux subtracted in 200 components = 0.00339803 Jy
! Clean residual min=-0.003557 max=0.003309 Jy/beam
! Clean residual mean=0.000006 rms=0.000802 Jy/beam
! Combined flux in latest and established models = 1.18972 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 211 components and 1.18972 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084002Jy  sigma=0.300679
! Fit after  self-cal, rms=0.083987Jy  sigma=0.300601
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083987Jy  sigma=0.300601
! Fit after  self-cal, rms=0.084121Jy  sigma=0.300224
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.836 mas, bmaj=5.36 mas, bpa=-10.78 degrees
! Estimated noise=2.78868 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.755723 Jy
! Component: 100  -  total flux cleaned = 0.92247 Jy
! Component: 150  -  total flux cleaned = 0.985529 Jy
! Component: 200  -  total flux cleaned = 1.02252 Jy
! Total flux subtracted in 200 components = 1.02252 Jy
! Clean residual min=-0.009281 max=0.019268 Jy/beam
! Clean residual mean=0.000006 rms=0.002419 Jy/beam
! Combined flux in latest and established models = 1.02252 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 1.02252 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.385 mas, bmaj=6.37 mas, bpa=-8.805 degrees
! Estimated noise=2.19759 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0343086 Jy
! Component: 100  -  total flux cleaned = 0.0557699 Jy
! Component: 150  -  total flux cleaned = 0.0711095 Jy
! Component: 200  -  total flux cleaned = 0.0834436 Jy
! Total flux subtracted in 200 components = 0.0834436 Jy
! Clean residual min=-0.005289 max=0.007512 Jy/beam
! Clean residual mean=0.000038 rms=0.001708 Jy/beam
! Combined flux in latest and established models = 1.10597 Jy
! Adding 65 model components to the UV plane model.
! The established model now contains 74 components and 1.10597 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103813 Jy
! Component: 100  -  total flux cleaned = 0.0192566 Jy
! Component: 150  -  total flux cleaned = 0.0268928 Jy
! Component: 200  -  total flux cleaned = 0.0335295 Jy
! Total flux subtracted in 200 components = 0.0335295 Jy
! Clean residual min=-0.004067 max=0.004890 Jy/beam
! Clean residual mean=0.000024 rms=0.001176 Jy/beam
! Combined flux in latest and established models = 1.13949 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 117 components and 1.13949 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.508 mas, bmaj=9.754 mas, bpa=-6.454 degrees
! Estimated noise=2.76065 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0106519 Jy
! Component: 100  -  total flux cleaned = 0.0185105 Jy
! Component: 150  -  total flux cleaned = 0.0245753 Jy
! Component: 200  -  total flux cleaned = 0.0294229 Jy
! Total flux subtracted in 200 components = 0.0294229 Jy
! Clean residual min=-0.003540 max=0.003789 Jy/beam
! Clean residual mean=0.000025 rms=0.001117 Jy/beam
! Combined flux in latest and established models = 1.16892 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00403205 Jy
! Component: 100  -  total flux cleaned = 0.00741906 Jy
! Component: 150  -  total flux cleaned = 0.0102767 Jy
! Component: 200  -  total flux cleaned = 0.0122367 Jy
! Total flux subtracted in 200 components = 0.0122367 Jy
! Clean residual min=-0.002968 max=0.002955 Jy/beam
! Clean residual mean=0.000017 rms=0.000890 Jy/beam
! Combined flux in latest and established models = 1.18115 Jy
! Adding 158 model components to the UV plane model.
! The established model now contains 260 components and 1.18115 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.385 mas, bmaj=6.37 mas, bpa=-8.805 degrees
! Estimated noise=2.19759 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00268484 Jy
! Component: 100  -  total flux cleaned = 0.00409788 Jy
! Component: 150  -  total flux cleaned = 0.00508008 Jy
! Component: 200  -  total flux cleaned = 0.00573126 Jy
! Total flux subtracted in 200 components = 0.00573126 Jy
! Clean residual min=-0.003210 max=0.003443 Jy/beam
! Clean residual mean=0.000006 rms=0.000747 Jy/beam
! Combined flux in latest and established models = 1.18688 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 283 components and 1.18688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083755Jy  sigma=0.298641
! Fit after  self-cal, rms=0.083720Jy  sigma=0.298239
wmodel J0205+3212_S_a_map.mod
! Writing 283 model components to file: J0205+3212_S_a_map.mod
wobs   J0205+3212_S_a_uvs.fits
! Writing UV FITS file: J0205+3212_S_a_uvs.fits
wwins  J0205+3212_S_a_map.win
! wwins: Wrote 6 windows to J0205+3212_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000317416 Jy
! Component: 100  -  total flux cleaned = 0.000210368 Jy
! Component: 150  -  total flux cleaned = 0.000210822 Jy
! Component: 200  -  total flux cleaned = 1.703e-05 Jy
! Component: 250  -  total flux cleaned = 0.000112618 Jy
! Component: 300  -  total flux cleaned = 0.000205141 Jy
! Component: 350  -  total flux cleaned = 0.000296553 Jy
! Component: 400  -  total flux cleaned = 0.000385847 Jy
! Component: 450  -  total flux cleaned = 0.000430397 Jy
! Component: 500  -  total flux cleaned = 0.000558961 Jy
! Component: 550  -  total flux cleaned = 0.000516607 Jy
! Component: 600  -  total flux cleaned = 0.000598486 Jy
! Component: 650  -  total flux cleaned = 0.0005572 Jy
! Component: 700  -  total flux cleaned = 0.0005565 Jy
! Component: 750  -  total flux cleaned = 0.000556137 Jy
! Component: 800  -  total flux cleaned = 0.00047807 Jy
! Component: 850  -  total flux cleaned = 0.000439877 Jy
! Component: 900  -  total flux cleaned = 0.00043942 Jy
! Component: 950  -  total flux cleaned = 0.000326848 Jy
! Component: 1000  -  total flux cleaned = 0.000326763 Jy
! Component: 1050  -  total flux cleaned = 0.000327246 Jy
! Component: 1100  -  total flux cleaned = 0.000435593 Jy
! Component: 1150  -  total flux cleaned = 0.000507561 Jy
! Component: 1200  -  total flux cleaned = 0.00054298 Jy
! Component: 1250  -  total flux cleaned = 0.000472507 Jy
! Component: 1300  -  total flux cleaned = 0.000473222 Jy
! Component: 1350  -  total flux cleaned = 0.000611588 Jy
! Component: 1400  -  total flux cleaned = 0.000543293 Jy
! Component: 1450  -  total flux cleaned = 0.000407835 Jy
! Component: 1500  -  total flux cleaned = 0.000508882 Jy
! Component: 1550  -  total flux cleaned = 0.000641883 Jy
! Component: 1600  -  total flux cleaned = 0.000542978 Jy
! Component: 1650  -  total flux cleaned = 0.000510336 Jy
! Component: 1700  -  total flux cleaned = 0.000607638 Jy
! Component: 1750  -  total flux cleaned = 0.000575445 Jy
! Component: 1800  -  total flux cleaned = 0.000543661 Jy
! Component: 1850  -  total flux cleaned = 0.000543522 Jy
! Component: 1900  -  total flux cleaned = 0.000480869 Jy
! Component: 1950  -  total flux cleaned = 0.000481403 Jy
! Component: 2000  -  total flux cleaned = 0.000388861 Jy
! Component: 2050  -  total flux cleaned = 0.000388727 Jy
! Component: 2100  -  total flux cleaned = 0.000418892 Jy
! Component: 2150  -  total flux cleaned = 0.00041919 Jy
! Component: 2200  -  total flux cleaned = 0.000238725 Jy
! Component: 2250  -  total flux cleaned = 0.000298561 Jy
! Component: 2300  -  total flux cleaned = 0.000150559 Jy
! Component: 2350  -  total flux cleaned = 0.000150611 Jy
! Component: 2400  -  total flux cleaned = 9.23051e-05 Jy
! Component: 2450  -  total flux cleaned = -2.33102e-05 Jy
! Component: 2500  -  total flux cleaned = -5.19596e-05 Jy
! Component: 2550  -  total flux cleaned = -0.000109016 Jy
! Component: 2600  -  total flux cleaned = -8.06554e-05 Jy
! Component: 2650  -  total flux cleaned = -0.000193215 Jy
! Component: 2700  -  total flux cleaned = -0.000221318 Jy
! Component: 2750  -  total flux cleaned = -0.000249306 Jy
! Component: 2800  -  total flux cleaned = -0.000277219 Jy
! Component: 2850  -  total flux cleaned = -0.000359655 Jy
! Component: 2900  -  total flux cleaned = -0.000468945 Jy
! Component: 2950  -  total flux cleaned = -0.000523213 Jy
! Component: 3000  -  total flux cleaned = -0.000469339 Jy
! Component: 3050  -  total flux cleaned = -0.000496365 Jy
! Component: 3100  -  total flux cleaned = -0.000575838 Jy
! Component: 3150  -  total flux cleaned = -0.000522823 Jy
! Component: 3200  -  total flux cleaned = -0.00062784 Jy
! Component: 3250  -  total flux cleaned = -0.000627578 Jy
! Component: 3300  -  total flux cleaned = -0.000757172 Jy
! Component: 3350  -  total flux cleaned = -0.000757139 Jy
! Component: 3400  -  total flux cleaned = -0.000782746 Jy
! Component: 3450  -  total flux cleaned = -0.000782667 Jy
! Component: 3500  -  total flux cleaned = -0.000757241 Jy
! Component: 3550  -  total flux cleaned = -0.000782367 Jy
! Component: 3600  -  total flux cleaned = -0.000832495 Jy
! Component: 3650  -  total flux cleaned = -0.000732941 Jy
! Component: 3700  -  total flux cleaned = -0.000881823 Jy
! Component: 3750  -  total flux cleaned = -0.000906318 Jy
! Component: 3800  -  total flux cleaned = -0.000955294 Jy
! Component: 3850  -  total flux cleaned = -0.000955488 Jy
! Component: 3900  -  total flux cleaned = -0.00090705 Jy
! Component: 3950  -  total flux cleaned = -0.00100343 Jy
! Component: 4000  -  total flux cleaned = -0.0010512 Jy
! Component: 4050  -  total flux cleaned = -0.00107507 Jy
! Total flux subtracted in 4096 components = -0.00114644 Jy
! Clean residual min=-0.001676 max=0.001574 Jy/beam
! Clean residual mean=0.000005 rms=0.000435 Jy/beam
! Combined flux in latest and established models = 1.18574 Jy
keep
! Adding 281 model components to the UV plane model.
! The established model now contains 564 components and 1.18574 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uvm//J0205+3212_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.385 x 6.37 at -8.805 degrees (North through East)
! Clean map  min=-0.0024777  max=0.97827 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uvm//J0205+3212_S_a_map.fits
wmodel /image_prod/ug002_uvm//J0205+3212_S_a_map.mod
! Writing 564 model components to file: /image_prod/ug002_uvm//J0205+3212_S_a_map.mod
wobs   /image_prod/ug002_uvm//J0205+3212_S_a_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uvm//J0205+3212_S_a_uvs.fits
wwins  /image_prod/ug002_uvm//J0205+3212_S_a_map.win
! wwins: Wrote 7 windows to /image_prod/ug002_uvm//J0205+3212_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.97827 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000432648 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.132678 0.132678 0.265355 0.530711 1.06142 2.12284 4.24568 8.49137 16.9827 33.9655 67.9309
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.978 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2261.12 
quit
! Quitting program
! Log file /image_prod/ug002_uvm//J0205+3212_S_a_dfm.log closed on Wed Mar  4 16:30:43 2020