! Started logfile: /image_prod/ug002_uvm//J0203+7232_X_a_dfm.log on Wed Mar 4 16:30:32 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J0203+7232_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J0203+7232_X_a_uvm.fits ! AN table 1: 6 integrations on 36 of 36 possible baselines. ! AN table 2: 6 integrations on 36 of 36 possible baselines. ! AN table 3: 7 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.890228 visibilities/baseline/integration-bin. ! Found source: J0203+7232 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 7980 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0203+7232_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.065667Jy sigma=13.955463 ! Fit after self-cal, rms=0.635484Jy sigma=8.164015 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8426 mas, bmaj=1.039 mas, bpa=-32.54 degrees ! Estimated noise=0.943419 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.274701 Jy ! Component: 100 - total flux cleaned = 0.357461 Jy ! Total flux subtracted in 100 components = 0.357461 Jy ! Clean residual min=-0.014548 max=0.035000 Jy/beam ! Clean residual mean=-0.000047 rms=0.003583 Jy/beam ! Combined flux in latest and established models = 0.357461 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.357461 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099215Jy sigma=1.291582 ! Fit after self-cal, rms=0.099001Jy sigma=1.288570 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0392432 Jy ! Component: 100 - total flux cleaned = 0.0610865 Jy ! Total flux subtracted in 100 components = 0.0610865 Jy ! Clean residual min=-0.011408 max=0.014207 Jy/beam ! Clean residual mean=-0.000026 rms=0.002509 Jy/beam ! Combined flux in latest and established models = 0.418548 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 15 components and 0.418547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079640Jy sigma=0.991696 ! Fit after self-cal, rms=0.079536Jy sigma=0.990243 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.086 mas, bmaj=1.269 mas, bpa=-42.25 degrees ! Estimated noise=0.636147 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0170958 Jy ! Component: 100 - total flux cleaned = 0.0258107 Jy ! Component: 150 - total flux cleaned = 0.0304748 Jy ! Component: 200 - total flux cleaned = 0.0323606 Jy ! Total flux subtracted in 200 components = 0.0323606 Jy ! Clean residual min=-0.013563 max=0.012670 Jy/beam ! Clean residual mean=-0.000037 rms=0.002604 Jy/beam ! Combined flux in latest and established models = 0.450908 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 24 components and 0.450908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076460Jy sigma=0.936548 ! Fit after self-cal, rms=0.076386Jy sigma=0.935558 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.086 x 1.269 at -42.25 degrees (North through East) ! Clean map min=-0.012829 max=0.36882 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 0.92 KP 0.98 ! LA 0.97 NL 1.10 OV 0.91 PT 0.88 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 HN 0.89 KP 1.04 LA 1.02 ! MK 0.95 NL 1.23 OV 0.92 PT 0.90 ! SC 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.07 HN 0.89 KP 1.05 ! LA 1.10 MK 1.06 NL 1.05 OV 0.96 ! PT 1.01 SC 1.29 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.99 HN 0.92 KP 0.99 ! LA 0.97 NL 1.09 OV 0.90 PT 0.85 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 HN 0.92 KP 1.02 LA 1.00 ! MK 0.98 NL 1.24 OV 0.92 PT 0.95 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 1.07 HN 0.85 KP 1.06 ! LA 1.07 MK 1.02 NL 1.09 OV 0.97 ! PT 0.99 SC 1.31 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 0.93 KP 0.99 ! LA 0.97 NL 1.10 OV 0.93 PT 0.85 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 HN 0.91 KP 1.04 LA 1.03 ! MK 1.03 NL 1.24 OV 0.93 PT 0.92 ! SC 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.08 HN 0.83 KP 1.06 ! LA 1.07 MK 1.01 NL 1.11 OV 0.95 ! PT 1.02 SC 1.30 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 0.94 KP 0.98 ! LA 0.97 NL 1.05 OV 0.91 PT 0.87 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 HN 0.91 KP 1.04 LA 1.04 ! MK 1.00 NL 1.22 OV 0.93 PT 0.93 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.09 HN 0.83 KP 1.05 ! LA 1.07 MK 1.09 NL 1.06 OV 0.96 ! PT 1.01 SC 1.25 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.94 HN 0.90 KP 0.99 ! LA 0.97 NL 1.11 OV 0.91 PT 0.86 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 HN 0.96 KP 1.03 LA 1.07 ! MK 0.96 NL 1.23 OV 0.96 PT 0.92 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.05 HN 0.86 KP 1.05 ! LA 1.10 MK 1.04 NL 1.11 OV 0.95 ! PT 1.03 SC 1.29 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 0.91 KP 0.95 ! LA 0.99 NL 1.09 OV 0.84 PT 0.88 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 HN 0.93 KP 1.05 LA 1.04 ! MK 1.00 NL 1.23 OV 0.93 PT 0.95 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.03 HN 0.83 KP 1.08 ! LA 1.09 MK 1.06 NL 1.08 OV 0.94 ! PT 1.05 SC 1.25 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 0.94 KP 0.97 ! LA 0.96 NL 1.11 OV 0.90 PT 0.86 ! SC 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 HN 0.96 KP 1.04 LA 1.02 ! MK 1.00 NL 1.23 OV 0.96 PT 0.89 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.06 HN 0.85 KP 1.04 ! LA 1.11 MK 1.04 NL 1.08 OV 0.98 ! PT 1.00 SC 1.31 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.94 HN 0.91 KP 0.98 ! LA 0.98 NL 1.11 OV 0.89 PT 0.85 ! SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 HN 0.98 KP 1.04 LA 1.04 ! MK 1.04 NL 1.23 OV 0.92 PT 0.92 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.11 HN 0.82 KP 1.08 ! LA 1.07 MK 1.10 NL 1.07 OV 0.95 ! PT 1.00 SC 1.28 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 0.89 KP 0.98 ! LA 0.97 NL 1.12 OV 0.92 PT 0.89 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 HN 0.94 KP 1.04 LA 1.07 ! MK 1.04 NL 1.17 OV 0.94 PT 0.94 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.09 HN 0.86 KP 1.04 ! LA 1.09 MK 1.04 NL 1.08 OV 0.98 ! PT 1.01 SC 1.29 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 0.90 KP 0.96 ! LA 0.98 NL 1.08 OV 0.92 PT 0.85 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 HN 0.88 KP 1.07 LA 1.04 ! MK 1.01 NL 1.27 OV 1.00 PT 0.89 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.05 HN 0.85 KP 1.08 ! LA 1.09 MK 1.06 NL 1.06 OV 0.95 ! PT 1.05 SC 1.31 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.92 KP 1.00 ! LA 0.96 NL 1.06 OV 0.88 PT 0.85 ! SC 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 HN 0.94 KP 1.06 LA 1.03 ! MK 0.98 NL 1.28 OV 0.94 PT 0.94 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.07 HN 0.84 KP 1.05 ! LA 1.07 MK 1.06 NL 1.07 OV 0.95 ! PT 1.03 SC 1.20 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.97 HN 0.91 KP 0.99 ! LA 0.99 NL 1.11 OV 0.90 PT 0.85 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 HN 0.92 KP 1.04 LA 1.04 ! MK 1.02 NL 1.24 OV 0.94 PT 0.91 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.04 HN 0.86 KP 1.05 ! LA 1.10 MK 1.05 NL 1.08 OV 0.96 ! PT 1.05 SC 1.27 ! ! ! Fit before self-cal, rms=0.076386Jy sigma=0.935558 ! Fit after self-cal, rms=0.061925Jy sigma=0.697661 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.082 mas, bmaj=1.29 mas, bpa=-39.6 degrees ! Estimated noise=0.635557 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.2, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156438 Jy ! Component: 100 - total flux cleaned = 0.0014389 Jy ! Component: 150 - total flux cleaned = 0.00153041 Jy ! Component: 200 - total flux cleaned = 0.00135745 Jy ! Total flux subtracted in 200 components = 0.00135745 Jy ! Clean residual min=-0.003073 max=0.003912 Jy/beam ! Clean residual mean=-0.000003 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.452266 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 37 components and 0.452266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061426Jy sigma=0.690875 ! Fit after self-cal, rms=0.061419Jy sigma=0.689736 ! Inverting map ! Added new window around map position (5.2, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00287257 Jy ! Component: 100 - total flux cleaned = 0.00386457 Jy ! Component: 150 - total flux cleaned = 0.00419038 Jy ! Component: 200 - total flux cleaned = 0.00433295 Jy ! Total flux subtracted in 200 components = 0.00433295 Jy ! Clean residual min=-0.003036 max=0.003290 Jy/beam ! Clean residual mean=-0.000003 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 0.456599 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 47 components and 0.456599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061073Jy sigma=0.685484 ! Fit after self-cal, rms=0.061043Jy sigma=0.685066 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061043Jy sigma=0.685066 ! Fit after self-cal, rms=0.061091Jy sigma=0.683676 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.081 mas, bmaj=1.294 mas, bpa=-39.54 degrees ! Estimated noise=0.635081 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000102974 Jy ! Component: 100 - total flux cleaned = 0.000509903 Jy ! Component: 150 - total flux cleaned = 0.000937724 Jy ! Component: 200 - total flux cleaned = 0.0011975 Jy ! Total flux subtracted in 200 components = 0.0011975 Jy ! Clean residual min=-0.002759 max=0.002718 Jy/beam ! Clean residual mean=-0.000003 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.457796 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 54 components and 0.457796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060858Jy sigma=0.680793 ! Fit after self-cal, rms=0.060842Jy sigma=0.680519 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000216461 Jy ! Component: 100 - total flux cleaned = 0.000575895 Jy ! Component: 150 - total flux cleaned = 0.000789667 Jy ! Component: 200 - total flux cleaned = 0.000988772 Jy ! Total flux subtracted in 200 components = 0.000988772 Jy ! Clean residual min=-0.002630 max=0.002554 Jy/beam ! Clean residual mean=-0.000003 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.458785 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 62 components and 0.458785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060725Jy sigma=0.679177 ! Fit after self-cal, rms=0.060719Jy sigma=0.679062 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060719Jy sigma=0.679062 ! Fit after self-cal, rms=0.060862Jy sigma=0.678405 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.08 mas, bmaj=1.298 mas, bpa=-39.32 degrees ! Estimated noise=0.635106 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.96759e-05 Jy ! Component: 100 - total flux cleaned = 6.3308e-05 Jy ! Component: 150 - total flux cleaned = 0.000172297 Jy ! Component: 200 - total flux cleaned = 0.000267753 Jy ! Total flux subtracted in 200 components = 0.000267753 Jy ! Clean residual min=-0.002487 max=0.002279 Jy/beam ! Clean residual mean=-0.000003 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.459053 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 67 components and 0.459053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060734Jy sigma=0.676856 ! Fit after self-cal, rms=0.060730Jy sigma=0.676751 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000130758 Jy ! Component: 100 - total flux cleaned = 0.000350778 Jy ! Component: 150 - total flux cleaned = 0.000552891 Jy ! Component: 200 - total flux cleaned = 0.000702552 Jy ! Total flux subtracted in 200 components = 0.000702552 Jy ! Clean residual min=-0.002382 max=0.002247 Jy/beam ! Clean residual mean=-0.000003 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.459755 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 71 components and 0.459755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060665Jy sigma=0.676022 ! Fit after self-cal, rms=0.060662Jy sigma=0.675972 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060662Jy sigma=0.675972 ! Fit after self-cal, rms=0.060832Jy sigma=0.675582 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.368 mas, bmaj=2.638 mas, bpa=-68.83 degrees ! Estimated noise=0.804476 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000537532 Jy ! Component: 100 - total flux cleaned = 0.000711907 Jy ! Component: 150 - total flux cleaned = 0.000849761 Jy ! Component: 200 - total flux cleaned = 0.000930482 Jy ! Total flux subtracted in 200 components = 0.000930482 Jy ! Clean residual min=-0.003229 max=0.002508 Jy/beam ! Clean residual mean=-0.000006 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.460686 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 93 components and 0.460686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060819Jy sigma=0.675360 ! Fit after self-cal, rms=0.060819Jy sigma=0.675338 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000224303 Jy ! Component: 100 - total flux cleaned = 0.000313467 Jy ! Component: 150 - total flux cleaned = 0.000351307 Jy ! Component: 200 - total flux cleaned = 0.000385833 Jy ! Total flux subtracted in 200 components = 0.000385833 Jy ! Clean residual min=-0.003198 max=0.002495 Jy/beam ! Clean residual mean=-0.000006 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.461071 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 98 components and 0.461071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060811Jy sigma=0.675202 ! Fit after self-cal, rms=0.060811Jy sigma=0.675195 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.079 mas, bmaj=1.302 mas, bpa=-39.07 degrees ! Estimated noise=0.635291 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.079 x 1.302 at -39.07 degrees (North through East) ! Clean map min=-0.0020956 max=0.36733 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.835 mas, bmaj=1.074 mas, bpa=-30.91 degrees ! Estimated noise=0.939252 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.273953 Jy ! Component: 100 - total flux cleaned = 0.3559 Jy ! Component: 150 - total flux cleaned = 0.393406 Jy ! Component: 200 - total flux cleaned = 0.414581 Jy ! Total flux subtracted in 200 components = 0.414581 Jy ! Clean residual min=-0.004644 max=0.010968 Jy/beam ! Clean residual mean=-0.000011 rms=0.001258 Jy/beam ! Combined flux in latest and established models = 0.414581 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.414581 Jy ! Inverting map and beam ! Estimated beam: bmin=1.079 mas, bmaj=1.302 mas, bpa=-39.07 degrees ! Estimated noise=0.635291 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0178653 Jy ! Component: 100 - total flux cleaned = 0.0272808 Jy ! Component: 150 - total flux cleaned = 0.0331171 Jy ! Component: 200 - total flux cleaned = 0.0371023 Jy ! Total flux subtracted in 200 components = 0.0371023 Jy ! Clean residual min=-0.002469 max=0.002778 Jy/beam ! Clean residual mean=-0.000005 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.451683 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 39 components and 0.451683 Jy ! Inverting map ! Added new window around map position (4.6, -34.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00306853 Jy ! Component: 100 - total flux cleaned = 0.00541705 Jy ! Component: 150 - total flux cleaned = 0.00665144 Jy ! Component: 200 - total flux cleaned = 0.00771279 Jy ! Total flux subtracted in 200 components = 0.00771279 Jy ! Clean residual min=-0.002212 max=0.002054 Jy/beam ! Clean residual mean=-0.000003 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.459396 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 56 components and 0.459396 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.368 mas, bmaj=2.638 mas, bpa=-68.83 degrees ! Estimated noise=0.804476 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176764 Jy ! Component: 100 - total flux cleaned = 0.00230279 Jy ! Component: 150 - total flux cleaned = 0.00246219 Jy ! Component: 200 - total flux cleaned = 0.00256516 Jy ! Total flux subtracted in 200 components = 0.00256516 Jy ! Clean residual min=-0.003112 max=0.002456 Jy/beam ! Clean residual mean=-0.000004 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.461961 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.13015e-05 Jy ! Component: 100 - total flux cleaned = 6.01571e-05 Jy ! Component: 150 - total flux cleaned = 6.00516e-05 Jy ! Component: 200 - total flux cleaned = 3.61145e-05 Jy ! Total flux subtracted in 200 components = 3.61145e-05 Jy ! Clean residual min=-0.003057 max=0.002365 Jy/beam ! Clean residual mean=-0.000004 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.461997 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 94 components and 0.461997 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.079 mas, bmaj=1.302 mas, bpa=-39.07 degrees ! Estimated noise=0.635291 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.41298e-05 Jy ! Component: 100 - total flux cleaned = -4.08482e-05 Jy ! Component: 150 - total flux cleaned = -7.92777e-07 Jy ! Component: 200 - total flux cleaned = -3.74789e-05 Jy ! Total flux subtracted in 200 components = -3.74789e-05 Jy ! Clean residual min=-0.002055 max=0.001981 Jy/beam ! Clean residual mean=-0.000002 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.46196 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 109 components and 0.46196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060629Jy sigma=0.672963 ! Fit after self-cal, rms=0.060610Jy sigma=0.672788 wmodel J0203+7232_X_a_map.mod ! Writing 109 model components to file: J0203+7232_X_a_map.mod wobs J0203+7232_X_a_uvs.fits ! Writing UV FITS file: J0203+7232_X_a_uvs.fits wwins J0203+7232_X_a_map.win ! wwins: Wrote 4 windows to J0203+7232_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000618363 Jy ! Component: 100 - total flux cleaned = -0.000692548 Jy ! Component: 150 - total flux cleaned = -0.000624978 Jy ! Component: 200 - total flux cleaned = -0.000592539 Jy ! Component: 250 - total flux cleaned = -0.00055964 Jy ! Component: 300 - total flux cleaned = -0.0005593 Jy ! Component: 350 - total flux cleaned = -0.000528381 Jy ! Component: 400 - total flux cleaned = -0.0005893 Jy ! Component: 450 - total flux cleaned = -0.000589559 Jy ! Component: 500 - total flux cleaned = -0.000531497 Jy ! Component: 550 - total flux cleaned = -0.000588524 Jy ! Component: 600 - total flux cleaned = -0.000504286 Jy ! Component: 650 - total flux cleaned = -0.000559492 Jy ! Component: 700 - total flux cleaned = -0.000558799 Jy ! Component: 750 - total flux cleaned = -0.000585522 Jy ! Component: 800 - total flux cleaned = -0.000612243 Jy ! Component: 850 - total flux cleaned = -0.000612982 Jy ! Component: 900 - total flux cleaned = -0.000690212 Jy ! Component: 950 - total flux cleaned = -0.000740708 Jy ! Component: 1000 - total flux cleaned = -0.000815393 Jy ! Component: 1050 - total flux cleaned = -0.000889367 Jy ! Component: 1100 - total flux cleaned = -0.00086507 Jy ! Component: 1150 - total flux cleaned = -0.000889267 Jy ! Component: 1200 - total flux cleaned = -0.000841348 Jy ! Component: 1250 - total flux cleaned = -0.000864636 Jy ! Component: 1300 - total flux cleaned = -0.000818068 Jy ! Component: 1350 - total flux cleaned = -0.000818288 Jy ! Component: 1400 - total flux cleaned = -0.000909157 Jy ! Component: 1450 - total flux cleaned = -0.000863928 Jy ! Component: 1500 - total flux cleaned = -0.000818948 Jy ! Component: 1550 - total flux cleaned = -0.000819254 Jy ! Component: 1600 - total flux cleaned = -0.000862712 Jy ! Component: 1650 - total flux cleaned = -0.000797768 Jy ! Component: 1700 - total flux cleaned = -0.000884369 Jy ! Component: 1750 - total flux cleaned = -0.000948119 Jy ! Component: 1800 - total flux cleaned = -0.000990069 Jy ! Component: 1850 - total flux cleaned = -0.00096892 Jy ! Component: 1900 - total flux cleaned = -0.000906396 Jy ! Component: 1950 - total flux cleaned = -0.000865178 Jy ! Component: 2000 - total flux cleaned = -0.0009675 Jy ! Component: 2050 - total flux cleaned = -0.000947199 Jy ! Component: 2100 - total flux cleaned = -0.000926982 Jy ! Component: 2150 - total flux cleaned = -0.000866974 Jy ! Component: 2200 - total flux cleaned = -0.000787864 Jy ! Component: 2250 - total flux cleaned = -0.000709552 Jy ! Component: 2300 - total flux cleaned = -0.000689938 Jy ! Component: 2350 - total flux cleaned = -0.000670858 Jy ! Component: 2400 - total flux cleaned = -0.000709214 Jy ! Component: 2450 - total flux cleaned = -0.000633002 Jy ! Component: 2500 - total flux cleaned = -0.00065176 Jy ! Component: 2550 - total flux cleaned = -0.000689391 Jy ! Component: 2600 - total flux cleaned = -0.000726636 Jy ! Component: 2650 - total flux cleaned = -0.00067125 Jy ! Component: 2700 - total flux cleaned = -0.000634612 Jy ! Component: 2750 - total flux cleaned = -0.000616562 Jy ! Component: 2800 - total flux cleaned = -0.000670983 Jy ! Component: 2850 - total flux cleaned = -0.000706806 Jy ! Component: 2900 - total flux cleaned = -0.000742371 Jy ! Component: 2950 - total flux cleaned = -0.000671402 Jy ! Component: 3000 - total flux cleaned = -0.000671258 Jy ! Component: 3050 - total flux cleaned = -0.00065381 Jy ! Component: 3100 - total flux cleaned = -0.00063618 Jy ! Component: 3150 - total flux cleaned = -0.000670745 Jy ! Component: 3200 - total flux cleaned = -0.00065368 Jy ! Component: 3250 - total flux cleaned = -0.000636671 Jy ! Component: 3300 - total flux cleaned = -0.000602862 Jy ! Component: 3350 - total flux cleaned = -0.000619612 Jy ! Component: 3400 - total flux cleaned = -0.00063638 Jy ! Component: 3450 - total flux cleaned = -0.00061952 Jy ! Component: 3500 - total flux cleaned = -0.000669132 Jy ! Component: 3550 - total flux cleaned = -0.000669015 Jy ! Component: 3600 - total flux cleaned = -0.000668807 Jy ! Component: 3650 - total flux cleaned = -0.000668894 Jy ! Component: 3700 - total flux cleaned = -0.000652683 Jy ! Component: 3750 - total flux cleaned = -0.000604717 Jy ! Component: 3800 - total flux cleaned = -0.000620642 Jy ! Component: 3850 - total flux cleaned = -0.000604797 Jy ! Component: 3900 - total flux cleaned = -0.000636379 Jy ! Component: 3950 - total flux cleaned = -0.000589228 Jy ! Component: 4000 - total flux cleaned = -0.000620447 Jy ! Component: 4050 - total flux cleaned = -0.000558362 Jy ! Total flux subtracted in 4096 components = -0.000558333 Jy ! Clean residual min=-0.000852 max=0.000952 Jy/beam ! Clean residual mean=-0.000000 rms=0.000261 Jy/beam ! Combined flux in latest and established models = 0.461401 Jy keep ! Adding 323 model components to the UV plane model. ! The established model now contains 432 components and 0.461401 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J0203+7232_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.079 x 1.302 at -39.07 degrees (North through East) ! Clean map min=-0.0014605 max=0.3659 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J0203+7232_X_a_map.fits wmodel /image_prod/ug002_uvm//J0203+7232_X_a_map.mod ! Writing 432 model components to file: /image_prod/ug002_uvm//J0203+7232_X_a_map.mod wobs /image_prod/ug002_uvm//J0203+7232_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J0203+7232_X_a_uvs.fits wwins /image_prod/ug002_uvm//J0203+7232_X_a_map.win ! wwins: Wrote 5 windows to /image_prod/ug002_uvm//J0203+7232_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.365899 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000260881 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.213896 0.213896 0.427792 0.855584 1.71117 3.42234 6.84467 13.6893 27.3787 54.7574 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.365 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1402.55 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J0203+7232_X_a_dfm.log closed on Wed Mar 4 16:30:37 2020