! Started logfile: /image_prod/ug002_uvm//J0154+4743_X_a_dfm.log on Wed Mar 4 16:29:36 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J0154+4743_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J0154+4743_X_a_uvm.fits ! AN table 1: 12 integrations on 36 of 36 possible baselines. ! AN table 2: 18 integrations on 28 of 28 possible baselines. ! AN table 3: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.813288 visibilities/baseline/integration-bin. ! Found source: J0154+4743 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 17040 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0154+4743_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.037032Jy sigma=9.333917 ! Fit after self-cal, rms=0.735262Jy sigma=6.610443 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7173 mas, bmaj=1.133 mas, bpa=-3.037 degrees ! Estimated noise=0.918805 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.201344 Jy ! Component: 100 - total flux cleaned = 0.251774 Jy ! Total flux subtracted in 100 components = 0.251774 Jy ! Clean residual min=-0.008225 max=0.020406 Jy/beam ! Clean residual mean=-0.000000 rms=0.001812 Jy/beam ! Combined flux in latest and established models = 0.251774 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.251774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088118Jy sigma=0.785044 ! Fit after self-cal, rms=0.088040Jy sigma=0.784192 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0214349 Jy ! Component: 100 - total flux cleaned = 0.0309688 Jy ! Total flux subtracted in 100 components = 0.0309688 Jy ! Clean residual min=-0.007887 max=0.013584 Jy/beam ! Clean residual mean=-0.000002 rms=0.001613 Jy/beam ! Combined flux in latest and established models = 0.282743 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 11 components and 0.282743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081563Jy sigma=0.727607 ! Fit after self-cal, rms=0.081543Jy sigma=0.727390 ! Inverting map ! Added new window around map position (-0.2, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109041 Jy ! Component: 100 - total flux cleaned = 0.0136092 Jy ! Total flux subtracted in 100 components = 0.0136092 Jy ! Clean residual min=-0.007353 max=0.012374 Jy/beam ! Clean residual mean=-0.000002 rms=0.001553 Jy/beam ! Combined flux in latest and established models = 0.296352 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 19 components and 0.296352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079813Jy sigma=0.712901 ! Fit after self-cal, rms=0.079698Jy sigma=0.711921 ! Inverting map ! Added new window around map position (-1.8, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010996 Jy ! Component: 100 - total flux cleaned = 0.014943 Jy ! Total flux subtracted in 100 components = 0.014943 Jy ! Clean residual min=-0.007402 max=0.011133 Jy/beam ! Clean residual mean=-0.000003 rms=0.001488 Jy/beam ! Combined flux in latest and established models = 0.311295 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 32 components and 0.311295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077756Jy sigma=0.692376 ! Fit after self-cal, rms=0.077543Jy sigma=0.690324 ! Inverting map ! Added new window around map position (1.6, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00919316 Jy ! Component: 100 - total flux cleaned = 0.0149741 Jy ! Total flux subtracted in 100 components = 0.0149741 Jy ! Clean residual min=-0.007041 max=0.008120 Jy/beam ! Clean residual mean=-0.000004 rms=0.001434 Jy/beam ! Combined flux in latest and established models = 0.326269 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 41 components and 0.326269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075985Jy sigma=0.674430 ! Fit after self-cal, rms=0.075891Jy sigma=0.673532 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9053 mas, bmaj=1.41 mas, bpa=-2.321 degrees ! Estimated noise=0.614272 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00797049 Jy ! Component: 100 - total flux cleaned = 0.0129588 Jy ! Component: 150 - total flux cleaned = 0.0144094 Jy ! Component: 200 - total flux cleaned = 0.0149567 Jy ! Total flux subtracted in 200 components = 0.0149567 Jy ! Clean residual min=-0.008061 max=0.009822 Jy/beam ! Clean residual mean=-0.000000 rms=0.001712 Jy/beam ! Combined flux in latest and established models = 0.341226 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 57 components and 0.341226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074954Jy sigma=0.662976 ! Fit after self-cal, rms=0.074920Jy sigma=0.662697 ! Inverting map ! Added new window around map position (0.2, -19.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00791769 Jy ! Component: 100 - total flux cleaned = 0.0100733 Jy ! Component: 150 - total flux cleaned = 0.0114776 Jy ! Component: 200 - total flux cleaned = 0.0117273 Jy ! Total flux subtracted in 200 components = 0.0117273 Jy ! Clean residual min=-0.007723 max=0.009705 Jy/beam ! Clean residual mean=-0.000001 rms=0.001665 Jy/beam ! Combined flux in latest and established models = 0.352953 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 79 components and 0.352953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073931Jy sigma=0.653616 ! Fit after self-cal, rms=0.073865Jy sigma=0.653014 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9053 x 1.41 at -2.321 degrees (North through East) ! Clean map min=-0.0070518 max=0.25957 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 HN 1.01 KP 1.03 ! LA 0.98 MK 0.97 OV 0.87 PT 0.90 ! SC 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.13 HN 1.01 KP 1.05 ! MK 1.10 NL 1.04 OV 0.94 SC 1.10 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.03 HN 1.00 KP 1.05 ! LA 1.08 MK 0.97 NL 1.37 OV 0.94 ! PT 0.92 SC 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 HN 1.04 KP 1.01 ! LA 0.98 MK 0.95 OV 0.89 PT 0.91 ! SC 0.94 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.22 HN 1.04 KP 1.07 ! MK 1.05 NL 1.07 OV 0.94 SC 1.13 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.99 HN 0.95 KP 1.04 ! LA 1.05 MK 0.99 NL 1.36 OV 0.92 ! PT 0.95 SC 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.99 HN 1.00 KP 1.02 ! LA 0.96 MK 0.98 OV 0.90 PT 0.91 ! SC 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.21 HN 1.03 KP 1.06 ! MK 1.09 NL 1.03 OV 0.94 SC 1.09 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 0.99 HN 0.95 KP 1.06 ! LA 1.07 MK 0.97 NL 1.35 OV 0.94 ! PT 0.96 SC 0.90 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00 HN 0.97 KP 1.02 ! LA 0.97 MK 1.00 OV 0.89 PT 0.91 ! SC 1.02 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.21 HN 1.06 KP 1.06 ! MK 1.08 NL 1.01 OV 0.98 SC 1.15 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 1.02 HN 0.97 KP 1.05 ! LA 1.05 MK 0.99 NL 1.37 OV 0.96 ! PT 0.94 SC 0.93 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.99 KP 1.00 ! LA 0.98 MK 0.97 OV 0.91 PT 0.91 ! SC 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.20 HN 1.04 KP 1.10 ! MK 1.05 NL 1.00 OV 0.96 SC 1.12 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.03 HN 0.98 KP 1.04 ! LA 1.06 MK 0.96 NL 1.32 OV 0.93 ! PT 0.92 SC 0.94 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.98 KP 1.01 ! LA 0.96 MK 0.97 OV 0.90 PT 0.91 ! SC 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.18 HN 1.05 KP 1.08 ! MK 1.08 NL 1.03 OV 0.93 SC 1.10 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 1.04 HN 0.93 KP 1.05 ! LA 1.09 MK 0.96 NL 1.37 OV 0.93 ! PT 0.94 SC 0.90 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 0.99 KP 1.00 ! LA 0.97 MK 1.03 OV 0.89 PT 0.91 ! SC 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.18 HN 1.06 KP 1.04 ! MK 1.04 NL 1.03 OV 0.96 SC 1.15 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 0.97 HN 0.95 KP 1.06 ! LA 1.06 MK 0.98 NL 1.32 OV 0.96 ! PT 0.91 SC 0.95 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.98 HN 1.00 KP 1.03 ! LA 0.98 MK 1.00 OV 0.91 PT 0.89 ! SC 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.15 HN 1.01 KP 1.10 ! MK 1.04 NL 1.01 OV 0.97 SC 1.12 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.04 HN 0.96 KP 1.06 ! LA 1.06 MK 0.97 NL 1.31 OV 0.92 ! PT 0.94 SC 0.92 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.97 HN 0.98 KP 0.99 ! LA 0.98 MK 0.99 OV 0.90 PT 0.92 ! SC 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.20 HN 1.05 KP 1.07 ! MK 1.10 NL 1.05 OV 0.91 SC 1.18 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 1.02 HN 0.95 KP 1.05 ! LA 1.06 MK 1.01 NL 1.35 OV 0.94 ! PT 0.92 SC 0.92 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 1.04 KP 1.01 ! LA 0.97 MK 1.00 OV 0.88 PT 0.92 ! SC 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.18 HN 1.01 KP 1.06 ! MK 1.09 NL 1.04 OV 0.99 SC 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.03 HN 0.96 KP 1.04 ! LA 1.06 MK 0.98 NL 1.32 OV 0.94 ! PT 0.92 SC 0.93 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.98 HN 1.00 KP 0.99 ! LA 0.99 MK 1.03 OV 0.88 PT 0.91 ! SC 1.07 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.20 HN 1.04 KP 1.08 ! MK 1.03 NL 1.02 OV 0.96 SC 1.13 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 0.99 HN 0.94 KP 1.05 ! LA 1.09 MK 0.95 NL 1.32 OV 0.93 ! PT 0.98 SC 0.92 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.98 HN 1.02 KP 1.03 ! LA 0.95 MK 1.04 OV 0.89 PT 0.90 ! SC 1.02 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.21 HN 1.06 KP 1.03 ! MK 1.08 NL 1.07 OV 0.96 SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.99 HN 1.04 KP 1.02 ! LA 1.08 MK 0.97 NL 1.39 OV 0.95 ! PT 0.97 SC 0.91 ! ! ! Fit before self-cal, rms=0.073865Jy sigma=0.653014 ! Fit after self-cal, rms=0.073048Jy sigma=0.582066 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8981 mas, bmaj=1.415 mas, bpa=-1.483 degrees ! Estimated noise=0.626262 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00535511 Jy ! Component: 100 - total flux cleaned = -0.00621489 Jy ! Component: 150 - total flux cleaned = -0.00717744 Jy ! Component: 200 - total flux cleaned = -0.00845445 Jy ! Total flux subtracted in 200 components = -0.00845445 Jy ! Clean residual min=-0.004790 max=0.005257 Jy/beam ! Clean residual mean=0.000000 rms=0.001241 Jy/beam ! Combined flux in latest and established models = 0.344499 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 95 components and 0.344499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072241Jy sigma=0.575343 ! Fit after self-cal, rms=0.072256Jy sigma=0.575184 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072256Jy sigma=0.575184 ! Fit after self-cal, rms=0.081026Jy sigma=0.489979 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8982 mas, bmaj=1.406 mas, bpa=-2.041 degrees ! Estimated noise=0.62527 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00394797 Jy ! Component: 100 - total flux cleaned = -0.00593127 Jy ! Component: 150 - total flux cleaned = -0.00701536 Jy ! Component: 200 - total flux cleaned = -0.00768613 Jy ! Total flux subtracted in 200 components = -0.00768613 Jy ! Clean residual min=-0.002147 max=0.001900 Jy/beam ! Clean residual mean=0.000004 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.336813 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 105 components and 0.336813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080660Jy sigma=0.486012 ! Fit after self-cal, rms=0.080772Jy sigma=0.485674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000700503 Jy ! Component: 100 - total flux cleaned = -0.000906334 Jy ! Component: 150 - total flux cleaned = -0.00109181 Jy ! Component: 200 - total flux cleaned = -0.00126168 Jy ! Total flux subtracted in 200 components = -0.00126168 Jy ! Clean residual min=-0.001984 max=0.001917 Jy/beam ! Clean residual mean=0.000004 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.335551 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 112 components and 0.335551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080654Jy sigma=0.484489 ! Fit after self-cal, rms=0.080649Jy sigma=0.484448 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080649Jy sigma=0.484448 ! Fit after self-cal, rms=0.082438Jy sigma=0.483592 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8977 mas, bmaj=1.406 mas, bpa=-1.808 degrees ! Estimated noise=0.624422 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00239383 Jy ! Component: 100 - total flux cleaned = -0.00369444 Jy ! Component: 150 - total flux cleaned = -0.00405835 Jy ! Component: 200 - total flux cleaned = -0.00422309 Jy ! Total flux subtracted in 200 components = -0.00422309 Jy ! Clean residual min=-0.001683 max=0.001650 Jy/beam ! Clean residual mean=0.000004 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.331328 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 117 components and 0.331328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082298Jy sigma=0.482285 ! Fit after self-cal, rms=0.082299Jy sigma=0.482260 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, 20.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000927066 Jy ! Component: 100 - total flux cleaned = 0.00102634 Jy ! Component: 150 - total flux cleaned = 0.00116062 Jy ! Component: 200 - total flux cleaned = 0.00111795 Jy ! Total flux subtracted in 200 components = 0.00111795 Jy ! Clean residual min=-0.001621 max=0.001309 Jy/beam ! Clean residual mean=0.000004 rms=0.000332 Jy/beam ! Combined flux in latest and established models = 0.332446 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 128 components and 0.332446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082232Jy sigma=0.481599 ! Fit after self-cal, rms=0.082233Jy sigma=0.481585 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082233Jy sigma=0.481585 ! Fit after self-cal, rms=0.083179Jy sigma=0.481288 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.24 mas, bmaj=2.414 mas, bpa=10.49 degrees ! Estimated noise=0.814698 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00221636 Jy ! Component: 100 - total flux cleaned = -0.00318819 Jy ! Component: 150 - total flux cleaned = -0.00344787 Jy ! Component: 200 - total flux cleaned = -0.00352476 Jy ! Total flux subtracted in 200 components = -0.00352476 Jy ! Clean residual min=-0.001584 max=0.001592 Jy/beam ! Clean residual mean=0.000009 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.328921 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 141 components and 0.328921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083122Jy sigma=0.481017 ! Fit after self-cal, rms=0.083125Jy sigma=0.480986 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000117821 Jy ! Component: 100 - total flux cleaned = 8.5367e-05 Jy ! Component: 150 - total flux cleaned = 8.72322e-05 Jy ! Component: 200 - total flux cleaned = 8.69131e-05 Jy ! Total flux subtracted in 200 components = 8.69131e-05 Jy ! Clean residual min=-0.001479 max=0.001550 Jy/beam ! Clean residual mean=0.000009 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.329008 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 147 components and 0.329008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083106Jy sigma=0.480914 ! Fit after self-cal, rms=0.083106Jy sigma=0.480907 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8973 mas, bmaj=1.407 mas, bpa=-1.679 degrees ! Estimated noise=0.624052 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8973 x 1.407 at -1.679 degrees (North through East) ! Clean map min=-0.0013802 max=0.26597 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7112 mas, bmaj=1.127 mas, bpa=-2.221 degrees ! Estimated noise=0.931747 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.203998 Jy ! Component: 100 - total flux cleaned = 0.255983 Jy ! Component: 150 - total flux cleaned = 0.278665 Jy ! Component: 200 - total flux cleaned = 0.292088 Jy ! Total flux subtracted in 200 components = 0.292088 Jy ! Clean residual min=-0.003065 max=0.007012 Jy/beam ! Clean residual mean=0.000003 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.292088 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.292088 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8973 mas, bmaj=1.407 mas, bpa=-1.679 degrees ! Estimated noise=0.624052 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110937 Jy ! Component: 100 - total flux cleaned = 0.0179775 Jy ! Component: 150 - total flux cleaned = 0.0226498 Jy ! Component: 200 - total flux cleaned = 0.0258826 Jy ! Total flux subtracted in 200 components = 0.0258826 Jy ! Clean residual min=-0.001433 max=0.001986 Jy/beam ! Clean residual mean=0.000004 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.31797 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 31 components and 0.31797 Jy ! Inverting map ! Added new window around map position (1.6, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00239408 Jy ! Component: 100 - total flux cleaned = 0.00430531 Jy ! Component: 150 - total flux cleaned = 0.00588402 Jy ! Component: 200 - total flux cleaned = 0.00700621 Jy ! Total flux subtracted in 200 components = 0.00700621 Jy ! Clean residual min=-0.001502 max=0.001342 Jy/beam ! Clean residual mean=0.000004 rms=0.000316 Jy/beam ! Combined flux in latest and established models = 0.324976 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 46 components and 0.324976 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.24 mas, bmaj=2.414 mas, bpa=10.49 degrees ! Estimated noise=0.814698 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156698 Jy ! Component: 100 - total flux cleaned = 0.00207724 Jy ! Component: 150 - total flux cleaned = 0.00235878 Jy ! Component: 200 - total flux cleaned = 0.00257805 Jy ! Total flux subtracted in 200 components = 0.00257805 Jy ! Clean residual min=-0.001439 max=0.001612 Jy/beam ! Clean residual mean=0.000009 rms=0.000378 Jy/beam ! Combined flux in latest and established models = 0.327554 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.2, -11.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00161025 Jy ! Component: 100 - total flux cleaned = 0.00236759 Jy ! Component: 150 - total flux cleaned = 0.00282739 Jy ! Component: 200 - total flux cleaned = 0.00313354 Jy ! Total flux subtracted in 200 components = 0.00313354 Jy ! Clean residual min=-0.001271 max=0.001352 Jy/beam ! Clean residual mean=0.000008 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.330688 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 75 components and 0.330688 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8973 mas, bmaj=1.407 mas, bpa=-1.679 degrees ! Estimated noise=0.624052 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.14096e-05 Jy ! Component: 100 - total flux cleaned = 2.74151e-05 Jy ! Component: 150 - total flux cleaned = 6.33977e-05 Jy ! Component: 200 - total flux cleaned = 0.000130024 Jy ! Total flux subtracted in 200 components = 0.000130024 Jy ! Clean residual min=-0.001330 max=0.001253 Jy/beam ! Clean residual mean=0.000003 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 0.330818 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 97 components and 0.330818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083010Jy sigma=0.480107 ! Fit after self-cal, rms=0.082994Jy sigma=0.479959 wmodel J0154+4743_X_a_map.mod ! Writing 97 model components to file: J0154+4743_X_a_map.mod wobs J0154+4743_X_a_uvs.fits ! Writing UV FITS file: J0154+4743_X_a_uvs.fits wwins J0154+4743_X_a_map.win ! wwins: Wrote 8 windows to J0154+4743_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000203807 Jy ! Component: 100 - total flux cleaned = -0.000272107 Jy ! Component: 150 - total flux cleaned = -0.000272334 Jy ! Component: 200 - total flux cleaned = -0.000168436 Jy ! Component: 250 - total flux cleaned = -0.000107625 Jy ! Component: 300 - total flux cleaned = -6.75179e-05 Jy ! Component: 350 - total flux cleaned = 1.07921e-05 Jy ! Component: 400 - total flux cleaned = 4.93448e-05 Jy ! Component: 450 - total flux cleaned = 0.000181656 Jy ! Component: 500 - total flux cleaned = 0.000256105 Jy ! Component: 550 - total flux cleaned = 0.000311242 Jy ! Component: 600 - total flux cleaned = 0.0003298 Jy ! Component: 650 - total flux cleaned = 0.00038414 Jy ! Component: 700 - total flux cleaned = 0.000490607 Jy ! Component: 750 - total flux cleaned = 0.00052566 Jy ! Component: 800 - total flux cleaned = 0.0005083 Jy ! Component: 850 - total flux cleaned = 0.000508556 Jy ! Component: 900 - total flux cleaned = 0.000491437 Jy ! Component: 950 - total flux cleaned = 0.000407023 Jy ! Component: 1000 - total flux cleaned = 0.000390195 Jy ! Component: 1050 - total flux cleaned = 0.000307095 Jy ! Component: 1100 - total flux cleaned = 0.000290683 Jy ! Component: 1150 - total flux cleaned = 0.000274271 Jy ! Component: 1200 - total flux cleaned = 0.000241793 Jy ! Component: 1250 - total flux cleaned = 0.000144923 Jy ! Component: 1300 - total flux cleaned = 0.000113019 Jy ! Component: 1350 - total flux cleaned = 8.12359e-05 Jy ! Component: 1400 - total flux cleaned = 8.11761e-05 Jy ! Component: 1450 - total flux cleaned = 2.72293e-06 Jy ! Component: 1500 - total flux cleaned = -0.000121906 Jy ! Component: 1550 - total flux cleaned = -0.00010625 Jy ! Component: 1600 - total flux cleaned = -0.00015214 Jy ! Component: 1650 - total flux cleaned = -0.000167647 Jy ! Component: 1700 - total flux cleaned = -0.00022835 Jy ! Component: 1750 - total flux cleaned = -0.00024365 Jy ! Component: 1800 - total flux cleaned = -0.000363817 Jy ! Component: 1850 - total flux cleaned = -0.000348852 Jy ! Component: 1900 - total flux cleaned = -0.000423168 Jy ! Component: 1950 - total flux cleaned = -0.000408329 Jy ! Component: 2000 - total flux cleaned = -0.000437783 Jy ! Component: 2050 - total flux cleaned = -0.000511058 Jy ! Component: 2100 - total flux cleaned = -0.000496405 Jy ! Component: 2150 - total flux cleaned = -0.000423911 Jy ! Component: 2200 - total flux cleaned = -0.000553718 Jy ! Component: 2250 - total flux cleaned = -0.000568032 Jy ! Component: 2300 - total flux cleaned = -0.000539301 Jy ! Component: 2350 - total flux cleaned = -0.00056779 Jy ! Component: 2400 - total flux cleaned = -0.000511121 Jy ! Component: 2450 - total flux cleaned = -0.000581511 Jy ! Component: 2500 - total flux cleaned = -0.000595631 Jy ! Component: 2550 - total flux cleaned = -0.000525682 Jy ! Component: 2600 - total flux cleaned = -0.000581366 Jy ! Component: 2650 - total flux cleaned = -0.00059531 Jy ! Component: 2700 - total flux cleaned = -0.000595271 Jy ! Component: 2750 - total flux cleaned = -0.000608962 Jy ! Component: 2800 - total flux cleaned = -0.000622667 Jy ! Component: 2850 - total flux cleaned = -0.000581666 Jy ! Component: 2900 - total flux cleaned = -0.000608917 Jy ! Component: 2950 - total flux cleaned = -0.000595421 Jy ! Component: 3000 - total flux cleaned = -0.000554921 Jy ! Component: 3050 - total flux cleaned = -0.000555032 Jy ! Component: 3100 - total flux cleaned = -0.000541676 Jy ! Component: 3150 - total flux cleaned = -0.000595056 Jy ! Component: 3200 - total flux cleaned = -0.000634868 Jy ! Component: 3250 - total flux cleaned = -0.000621655 Jy ! Component: 3300 - total flux cleaned = -0.000555673 Jy ! Component: 3350 - total flux cleaned = -0.000555657 Jy ! Component: 3400 - total flux cleaned = -0.000568754 Jy ! Component: 3450 - total flux cleaned = -0.000490358 Jy ! Component: 3500 - total flux cleaned = -0.000490315 Jy ! Component: 3550 - total flux cleaned = -0.000516294 Jy ! Component: 3600 - total flux cleaned = -0.000516353 Jy ! Component: 3650 - total flux cleaned = -0.000451922 Jy ! Component: 3700 - total flux cleaned = -0.000464774 Jy ! Component: 3750 - total flux cleaned = -0.000490374 Jy ! Component: 3800 - total flux cleaned = -0.000477657 Jy ! Component: 3850 - total flux cleaned = -0.000426747 Jy ! Component: 3900 - total flux cleaned = -0.000464791 Jy ! Component: 3950 - total flux cleaned = -0.000452138 Jy ! Component: 4000 - total flux cleaned = -0.000401802 Jy ! Component: 4050 - total flux cleaned = -0.000376712 Jy ! Total flux subtracted in 4096 components = -0.000439311 Jy ! Clean residual min=-0.000703 max=0.000729 Jy/beam ! Clean residual mean=0.000003 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.330379 Jy keep ! Adding 378 model components to the UV plane model. ! The established model now contains 475 components and 0.330379 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J0154+4743_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8973 x 1.407 at -1.679 degrees (North through East) ! Clean map min=-0.0011855 max=0.26762 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J0154+4743_X_a_map.fits wmodel /image_prod/ug002_uvm//J0154+4743_X_a_map.mod ! Writing 475 model components to file: /image_prod/ug002_uvm//J0154+4743_X_a_map.mod wobs /image_prod/ug002_uvm//J0154+4743_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J0154+4743_X_a_uvs.fits wwins /image_prod/ug002_uvm//J0154+4743_X_a_map.win ! wwins: Wrote 9 windows to /image_prod/ug002_uvm//J0154+4743_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.267615 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000219251 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.245782 0.245782 0.491565 0.98313 1.96626 3.93252 7.86504 15.7301 31.4602 62.9203 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.267 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1220.59 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J0154+4743_X_a_dfm.log closed on Wed Mar 4 16:29:42 2020