! Started logfile: /image_prod/ug002_uvm//J0147+2115_X_a_dfm.log on Wed Mar 4 16:29:11 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J0147+2115_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J0147+2115_X_a_uvm.fits ! AN table 1: 45 integrations on 36 of 36 possible baselines. ! AN table 2: 60 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.850463 visibilities/baseline/integration-bin. ! Found source: J0147+2115 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 44088 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0147+2115_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 40 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 40 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 40 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 40 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 40 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 40 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 40 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 40 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 40 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 40 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 40 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 40 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.005173Jy sigma=9.579606 ! Fit after self-cal, rms=0.934154Jy sigma=8.875571 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6582 mas, bmaj=1.541 mas, bpa=-5.466 degrees ! Estimated noise=0.665357 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0495278 Jy ! Component: 100 - total flux cleaned = 0.0665578 Jy ! Total flux subtracted in 100 components = 0.0665578 Jy ! Clean residual min=-0.004044 max=0.017960 Jy/beam ! Clean residual mean=0.000004 rms=0.001005 Jy/beam ! Combined flux in latest and established models = 0.0665578 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0665578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064293Jy sigma=0.580055 ! Fit after self-cal, rms=0.063637Jy sigma=0.573983 ! Inverting map ! Added new window around map position (0.8, 2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0168007 Jy ! Component: 100 - total flux cleaned = 0.0258745 Jy ! Total flux subtracted in 100 components = 0.0258745 Jy ! Clean residual min=-0.002839 max=0.005575 Jy/beam ! Clean residual mean=0.000002 rms=0.000676 Jy/beam ! Combined flux in latest and established models = 0.0924324 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 22 components and 0.0924324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057918Jy sigma=0.511457 ! Fit after self-cal, rms=0.057161Jy sigma=0.505066 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00901162 Jy ! Component: 100 - total flux cleaned = 0.0147348 Jy ! Total flux subtracted in 100 components = 0.0147348 Jy ! Clean residual min=-0.002232 max=0.003232 Jy/beam ! Clean residual mean=0.000001 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.107167 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 27 components and 0.107167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055235Jy sigma=0.483692 ! Fit after self-cal, rms=0.055064Jy sigma=0.482338 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0051758 Jy ! Component: 100 - total flux cleaned = 0.00881589 Jy ! Total flux subtracted in 100 components = 0.00881589 Jy ! Clean residual min=-0.002051 max=0.002497 Jy/beam ! Clean residual mean=0.000000 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.115983 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 32 components and 0.115983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054401Jy sigma=0.474989 ! Fit after self-cal, rms=0.054368Jy sigma=0.474689 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00318531 Jy ! Component: 100 - total flux cleaned = 0.00556385 Jy ! Total flux subtracted in 100 components = 0.00556385 Jy ! Clean residual min=-0.001905 max=0.002501 Jy/beam ! Clean residual mean=-0.000000 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.121547 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 38 components and 0.121547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054119Jy sigma=0.472001 ! Fit after self-cal, rms=0.054111Jy sigma=0.471900 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8411 mas, bmaj=1.819 mas, bpa=-5.534 degrees ! Estimated noise=0.360121 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.4, 5.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0033039 Jy ! Component: 100 - total flux cleaned = 0.00549983 Jy ! Component: 150 - total flux cleaned = 0.00718902 Jy ! Component: 200 - total flux cleaned = 0.00854125 Jy ! Total flux subtracted in 200 components = 0.00854125 Jy ! Clean residual min=-0.001431 max=0.001657 Jy/beam ! Clean residual mean=-0.000001 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 0.130088 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 66 components and 0.130088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053865Jy sigma=0.469218 ! Fit after self-cal, rms=0.053839Jy sigma=0.468978 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8411 x 1.819 at -5.534 degrees (North through East) ! Clean map min=-0.0013556 max=0.066308 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 HN 0.89 KP 1.07 LA 1.03 ! MK 1.00 NL 1.16 OV 0.89 PT 0.88 ! SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.97 HN 0.99 KP 1.02 ! LA 1.01 MK 1.00 NL 0.96 OV 0.96 ! PT 0.94 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 HN 0.87 KP 1.05 LA 1.01 ! MK 1.06 NL 1.19 OV 0.88 PT 0.88 ! SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.95 HN 1.02 KP 1.01 ! LA 0.97 MK 1.08 NL 0.98 OV 1.01 ! PT 0.95 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 HN 0.91 KP 1.02 LA 1.06 ! MK 1.01 NL 1.19 OV 0.89 PT 0.89 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.99 HN 1.08 KP 0.99 ! LA 1.00 MK 1.04 NL 0.97 OV 1.02 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 HN 0.90 KP 1.02 LA 1.05 ! MK 1.04 NL 1.21 OV 0.91 PT 0.87 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.97 HN 1.03 KP 1.01 ! LA 1.02 MK 1.02 NL 1.03 OV 1.02 ! PT 0.93 SC 1.05 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 HN 0.94 KP 1.01 LA 1.06 ! MK 1.04 NL 1.20 OV 0.88 PT 0.90 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.97 HN 0.94 KP 1.05 ! LA 1.00 MK 1.02 NL 0.94 OV 0.99 ! PT 0.93 SC 1.06 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 HN 0.85 KP 1.02 LA 1.03 ! MK 1.05 NL 1.18 OV 0.86 PT 0.95 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.98 HN 1.07 KP 1.01 ! LA 1.01 MK 1.05 NL 1.02 OV 0.95 ! PT 1.02 SC 1.08 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 HN 0.88 KP 1.03 LA 1.01 ! MK 1.08 NL 1.23 OV 0.94 PT 0.89 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.00 HN 0.97 KP 1.01 ! LA 1.00 MK 1.06 NL 0.93 OV 1.00 ! PT 0.93 SC 1.04 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 HN 0.88 KP 1.08 LA 1.04 ! MK 1.08 NL 1.19 OV 0.87 PT 0.96 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 1.00 HN 0.97 KP 1.00 ! LA 1.05 MK 1.01 NL 0.90 OV 1.01 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 HN 0.87 KP 1.03 LA 1.06 ! MK 1.09 NL 1.17 OV 0.87 PT 0.92 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.00 HN 1.00 KP 1.01 ! LA 0.99 MK 1.06 NL 1.01 OV 0.96 ! PT 0.95 SC 1.08 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 HN 0.87 KP 1.05 LA 1.00 ! MK 1.07 NL 1.19 OV 0.94 PT 0.95 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.01 HN 0.98 KP 1.00 ! LA 1.02 MK 1.04 NL 1.01 OV 1.02 ! PT 1.03 SC 1.03 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 HN 0.88 KP 1.06 LA 1.04 ! MK 0.98 NL 1.22 OV 0.92 PT 0.90 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.03 HN 1.00 KP 1.02 ! LA 1.03 MK 1.05 NL 0.91 OV 1.04 ! PT 0.92 SC 1.13 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 HN 0.95 KP 1.09 LA 1.04 ! MK 1.11 NL 1.18 OV 0.92 PT 0.93 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.00 HN 0.93 KP 1.05 ! LA 1.02 MK 1.06 NL 0.94 OV 1.00 ! PT 0.93 SC 1.11 ! ! ! Fit before self-cal, rms=0.053839Jy sigma=0.468978 ! Fit after self-cal, rms=0.053039Jy sigma=0.464539 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8514 mas, bmaj=1.824 mas, bpa=-5.453 degrees ! Estimated noise=0.358243 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000753934 Jy ! Component: 100 - total flux cleaned = 0.000960258 Jy ! Component: 150 - total flux cleaned = 0.00122808 Jy ! Component: 200 - total flux cleaned = 0.00145974 Jy ! Total flux subtracted in 200 components = 0.00145974 Jy ! Clean residual min=-0.000899 max=0.001077 Jy/beam ! Clean residual mean=-0.000000 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.131548 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 89 components and 0.131548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052987Jy sigma=0.464007 ! Fit after self-cal, rms=0.053006Jy sigma=0.463836 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053006Jy sigma=0.463836 ! Fit after self-cal, rms=0.053547Jy sigma=0.461615 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8488 mas, bmaj=1.813 mas, bpa=-5.212 degrees ! Estimated noise=0.357906 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000600008 Jy ! Component: 100 - total flux cleaned = 0.000853648 Jy ! Component: 150 - total flux cleaned = 0.00100419 Jy ! Component: 200 - total flux cleaned = 0.001078 Jy ! Total flux subtracted in 200 components = 0.001078 Jy ! Clean residual min=-0.000733 max=0.000785 Jy/beam ! Clean residual mean=-0.000000 rms=0.000176 Jy/beam ! Combined flux in latest and established models = 0.132626 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 99 components and 0.132626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053527Jy sigma=0.461415 ! Fit after self-cal, rms=0.053551Jy sigma=0.461346 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-30.8, -37). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00026692 Jy ! Component: 100 - total flux cleaned = 0.000307247 Jy ! Component: 150 - total flux cleaned = 0.000435424 Jy ! Component: 200 - total flux cleaned = 0.000451795 Jy ! Total flux subtracted in 200 components = 0.000451795 Jy ! Clean residual min=-0.000709 max=0.000751 Jy/beam ! Clean residual mean=-0.000000 rms=0.000172 Jy/beam ! Combined flux in latest and established models = 0.133078 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 111 components and 0.133078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053534Jy sigma=0.461188 ! Fit after self-cal, rms=0.053534Jy sigma=0.461177 ! Inverting map ! Added new window around map position (1, 31.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00052542 Jy ! Component: 100 - total flux cleaned = 0.000615157 Jy ! Component: 150 - total flux cleaned = 0.00064696 Jy ! Component: 200 - total flux cleaned = 0.00067618 Jy ! Total flux subtracted in 200 components = 0.00067618 Jy ! Clean residual min=-0.000704 max=0.000717 Jy/beam ! Clean residual mean=-0.000000 rms=0.000168 Jy/beam ! Combined flux in latest and established models = 0.133754 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 125 components and 0.133754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053523Jy sigma=0.461057 ! Fit after self-cal, rms=0.053522Jy sigma=0.461050 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053522Jy sigma=0.461050 ! Fit after self-cal, rms=0.053629Jy sigma=0.460988 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8491 mas, bmaj=1.808 mas, bpa=-5.102 degrees ! Estimated noise=0.357279 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000163381 Jy ! Component: 100 - total flux cleaned = 0.000271158 Jy ! Component: 150 - total flux cleaned = 0.000370851 Jy ! Component: 200 - total flux cleaned = 0.000437887 Jy ! Total flux subtracted in 200 components = 0.000437887 Jy ! Clean residual min=-0.000691 max=0.000708 Jy/beam ! Clean residual mean=-0.000000 rms=0.000165 Jy/beam ! Combined flux in latest and established models = 0.134192 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 132 components and 0.134192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053621Jy sigma=0.460915 ! Fit after self-cal, rms=0.053626Jy sigma=0.460910 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.00449e-05 Jy ! Component: 100 - total flux cleaned = 7.83548e-05 Jy ! Component: 150 - total flux cleaned = 0.000103015 Jy ! Component: 200 - total flux cleaned = 0.000138335 Jy ! Total flux subtracted in 200 components = 0.000138335 Jy ! Clean residual min=-0.000684 max=0.000706 Jy/beam ! Clean residual mean=-0.000000 rms=0.000164 Jy/beam ! Combined flux in latest and established models = 0.13433 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 139 components and 0.13433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053621Jy sigma=0.460859 ! Fit after self-cal, rms=0.053621Jy sigma=0.460855 ! Inverting map ! Added new window around map position (23.4, -16.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000509159 Jy ! Component: 100 - total flux cleaned = 0.000657242 Jy ! Component: 150 - total flux cleaned = 0.000841647 Jy ! Component: 200 - total flux cleaned = 0.000946011 Jy ! Total flux subtracted in 200 components = 0.000946011 Jy ! Clean residual min=-0.000636 max=0.000643 Jy/beam ! Clean residual mean=-0.000000 rms=0.000161 Jy/beam ! Combined flux in latest and established models = 0.135276 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 152 components and 0.135276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053611Jy sigma=0.460778 ! Fit after self-cal, rms=0.053610Jy sigma=0.460770 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053610Jy sigma=0.460770 ! Fit after self-cal, rms=0.053537Jy sigma=0.460760 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.99 mas, bmaj=2.687 mas, bpa=-4.61 degrees ! Estimated noise=0.449516 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000548526 Jy ! Component: 100 - total flux cleaned = 0.000916826 Jy ! Component: 150 - total flux cleaned = 0.00119471 Jy ! Component: 200 - total flux cleaned = 0.00131148 Jy ! Total flux subtracted in 200 components = 0.00131148 Jy ! Clean residual min=-0.000730 max=0.000786 Jy/beam ! Clean residual mean=-0.000000 rms=0.000188 Jy/beam ! Combined flux in latest and established models = 0.136588 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 168 components and 0.136588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053536Jy sigma=0.460740 ! Fit after self-cal, rms=0.053534Jy sigma=0.460732 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000173632 Jy ! Component: 100 - total flux cleaned = 0.000304688 Jy ! Component: 150 - total flux cleaned = 0.000370973 Jy ! Component: 200 - total flux cleaned = 0.000431099 Jy ! Total flux subtracted in 200 components = 0.000431099 Jy ! Clean residual min=-0.000725 max=0.000764 Jy/beam ! Clean residual mean=-0.000000 rms=0.000187 Jy/beam ! Combined flux in latest and established models = 0.137019 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 179 components and 0.137019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053535Jy sigma=0.460739 ! Fit after self-cal, rms=0.053534Jy sigma=0.460736 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8493 mas, bmaj=1.805 mas, bpa=-5.01 degrees ! Estimated noise=0.356821 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8493 x 1.805 at -5.01 degrees (North through East) ! Clean map min=-0.00059788 max=0.065265 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6653 mas, bmaj=1.52 mas, bpa=-4.826 degrees ! Estimated noise=0.659602 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0500506 Jy ! Component: 100 - total flux cleaned = 0.074133 Jy ! Component: 150 - total flux cleaned = 0.088941 Jy ! Component: 200 - total flux cleaned = 0.0989621 Jy ! Total flux subtracted in 200 components = 0.0989621 Jy ! Clean residual min=-0.002171 max=0.005547 Jy/beam ! Clean residual mean=0.000002 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.0989622 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0989622 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8493 mas, bmaj=1.805 mas, bpa=-5.01 degrees ! Estimated noise=0.356821 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00963846 Jy ! Component: 100 - total flux cleaned = 0.01532 Jy ! Component: 150 - total flux cleaned = 0.0192749 Jy ! Component: 200 - total flux cleaned = 0.0222336 Jy ! Total flux subtracted in 200 components = 0.0222336 Jy ! Clean residual min=-0.001193 max=0.001839 Jy/beam ! Clean residual mean=-0.000000 rms=0.000272 Jy/beam ! Combined flux in latest and established models = 0.121196 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 44 components and 0.121196 Jy ! Inverting map ! Added new window around map position (1.8, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00232577 Jy ! Component: 100 - total flux cleaned = 0.00418769 Jy ! Component: 150 - total flux cleaned = 0.00570348 Jy ! Component: 200 - total flux cleaned = 0.00695848 Jy ! Total flux subtracted in 200 components = 0.00695848 Jy ! Clean residual min=-0.000951 max=0.000911 Jy/beam ! Clean residual mean=-0.000000 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.128154 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 73 components and 0.128154 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.99 mas, bmaj=2.687 mas, bpa=-4.61 degrees ! Estimated noise=0.449516 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017999 Jy ! Component: 100 - total flux cleaned = 0.00298929 Jy ! Component: 150 - total flux cleaned = 0.00388872 Jy ! Component: 200 - total flux cleaned = 0.00460299 Jy ! Total flux subtracted in 200 components = 0.00460299 Jy ! Clean residual min=-0.000775 max=0.000829 Jy/beam ! Clean residual mean=-0.000000 rms=0.000215 Jy/beam ! Combined flux in latest and established models = 0.132757 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000598227 Jy ! Component: 100 - total flux cleaned = 0.00111247 Jy ! Component: 150 - total flux cleaned = 0.00152286 Jy ! Component: 200 - total flux cleaned = 0.00185261 Jy ! Total flux subtracted in 200 components = 0.00185261 Jy ! Clean residual min=-0.000726 max=0.000787 Jy/beam ! Clean residual mean=-0.000000 rms=0.000198 Jy/beam ! Combined flux in latest and established models = 0.13461 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 138 components and 0.13461 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8493 mas, bmaj=1.805 mas, bpa=-5.01 degrees ! Estimated noise=0.356821 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000129745 Jy ! Component: 100 - total flux cleaned = 0.00044586 Jy ! Component: 150 - total flux cleaned = 0.000665609 Jy ! Component: 200 - total flux cleaned = 0.000813543 Jy ! Total flux subtracted in 200 components = 0.000813543 Jy ! Clean residual min=-0.000693 max=0.000641 Jy/beam ! Clean residual mean=-0.000000 rms=0.000159 Jy/beam ! Combined flux in latest and established models = 0.135423 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 161 components and 0.135423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053530Jy sigma=0.460778 ! Fit after self-cal, rms=0.053511Jy sigma=0.460577 wmodel J0147+2115_X_a_map.mod ! Writing 161 model components to file: J0147+2115_X_a_map.mod wobs J0147+2115_X_a_uvs.fits ! Writing UV FITS file: J0147+2115_X_a_uvs.fits wwins J0147+2115_X_a_map.win ! wwins: Wrote 7 windows to J0147+2115_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000137707 Jy ! Component: 100 - total flux cleaned = -0.000195023 Jy ! Component: 150 - total flux cleaned = -0.000261292 Jy ! Component: 200 - total flux cleaned = -0.00032556 Jy ! Component: 250 - total flux cleaned = -0.000367495 Jy ! Component: 300 - total flux cleaned = -0.000377802 Jy ! Component: 350 - total flux cleaned = -0.000367829 Jy ! Component: 400 - total flux cleaned = -0.000407822 Jy ! Component: 450 - total flux cleaned = -0.000407838 Jy ! Component: 500 - total flux cleaned = -0.000407808 Jy ! Component: 550 - total flux cleaned = -0.000407835 Jy ! Component: 600 - total flux cleaned = -0.000398378 Jy ! Component: 650 - total flux cleaned = -0.000445388 Jy ! Component: 700 - total flux cleaned = -0.000435921 Jy ! Component: 750 - total flux cleaned = -0.000399226 Jy ! Component: 800 - total flux cleaned = -0.00042681 Jy ! Component: 850 - total flux cleaned = -0.000417769 Jy ! Component: 900 - total flux cleaned = -0.000435665 Jy ! Component: 950 - total flux cleaned = -0.000444291 Jy ! Component: 1000 - total flux cleaned = -0.000435493 Jy ! Component: 1050 - total flux cleaned = -0.000435423 Jy ! Component: 1100 - total flux cleaned = -0.000418145 Jy ! Component: 1150 - total flux cleaned = -0.000409581 Jy ! Component: 1200 - total flux cleaned = -0.000409612 Jy ! Component: 1250 - total flux cleaned = -0.000435043 Jy ! Component: 1300 - total flux cleaned = -0.000426667 Jy ! Component: 1350 - total flux cleaned = -0.000493341 Jy ! Component: 1400 - total flux cleaned = -0.000468476 Jy ! Component: 1450 - total flux cleaned = -0.000451935 Jy ! Component: 1500 - total flux cleaned = -0.000484599 Jy ! Component: 1550 - total flux cleaned = -0.000444016 Jy ! Component: 1600 - total flux cleaned = -0.000444094 Jy ! Component: 1650 - total flux cleaned = -0.000452111 Jy ! Component: 1700 - total flux cleaned = -0.000460084 Jy ! Component: 1750 - total flux cleaned = -0.000452194 Jy ! Component: 1800 - total flux cleaned = -0.000452218 Jy ! Component: 1850 - total flux cleaned = -0.000452131 Jy ! Component: 1900 - total flux cleaned = -0.000459915 Jy ! Component: 1950 - total flux cleaned = -0.000429035 Jy ! Component: 2000 - total flux cleaned = -0.000459814 Jy ! Component: 2050 - total flux cleaned = -0.000444532 Jy ! Component: 2100 - total flux cleaned = -0.000467422 Jy ! Component: 2150 - total flux cleaned = -0.000452228 Jy ! Component: 2200 - total flux cleaned = -0.000452259 Jy ! Component: 2250 - total flux cleaned = -0.000459769 Jy ! Component: 2300 - total flux cleaned = -0.00045982 Jy ! Component: 2350 - total flux cleaned = -0.000422742 Jy ! Component: 2400 - total flux cleaned = -0.000467057 Jy ! Component: 2450 - total flux cleaned = -0.000474408 Jy ! Component: 2500 - total flux cleaned = -0.000459788 Jy ! Component: 2550 - total flux cleaned = -0.000459745 Jy ! Component: 2600 - total flux cleaned = -0.000452575 Jy ! Component: 2650 - total flux cleaned = -0.000438119 Jy ! Component: 2700 - total flux cleaned = -0.000481271 Jy ! Component: 2750 - total flux cleaned = -0.000459807 Jy ! Component: 2800 - total flux cleaned = -0.000445541 Jy ! Component: 2850 - total flux cleaned = -0.000473953 Jy ! Component: 2900 - total flux cleaned = -0.000438656 Jy ! Component: 2950 - total flux cleaned = -0.000431607 Jy ! Component: 3000 - total flux cleaned = -0.000438563 Jy ! Component: 3050 - total flux cleaned = -0.000438585 Jy ! Component: 3100 - total flux cleaned = -0.00041768 Jy ! Component: 3150 - total flux cleaned = -0.000424703 Jy ! Component: 3200 - total flux cleaned = -0.000459124 Jy ! Component: 3250 - total flux cleaned = -0.000404173 Jy ! Component: 3300 - total flux cleaned = -0.000417848 Jy ! Component: 3350 - total flux cleaned = -0.000438275 Jy ! Component: 3400 - total flux cleaned = -0.00041793 Jy ! Component: 3450 - total flux cleaned = -0.000411171 Jy ! Component: 3500 - total flux cleaned = -0.000424692 Jy ! Component: 3550 - total flux cleaned = -0.000417952 Jy ! Component: 3600 - total flux cleaned = -0.000411263 Jy ! Component: 3650 - total flux cleaned = -0.000384663 Jy ! Component: 3700 - total flux cleaned = -0.000391285 Jy ! Component: 3750 - total flux cleaned = -0.000364838 Jy ! Component: 3800 - total flux cleaned = -0.000351675 Jy ! Component: 3850 - total flux cleaned = -0.000351708 Jy ! Component: 3900 - total flux cleaned = -0.000351744 Jy ! Component: 3950 - total flux cleaned = -0.000364755 Jy ! Component: 4000 - total flux cleaned = -0.000364779 Jy ! Component: 4050 - total flux cleaned = -0.000371252 Jy ! Total flux subtracted in 4096 components = -0.000390548 Jy ! Clean residual min=-0.000369 max=0.000376 Jy/beam ! Clean residual mean=0.000000 rms=0.000114 Jy/beam ! Combined flux in latest and established models = 0.135033 Jy keep ! Adding 333 model components to the UV plane model. ! The established model now contains 494 components and 0.135033 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J0147+2115_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8493 x 1.805 at -5.01 degrees (North through East) ! Clean map min=-0.00056587 max=0.064721 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J0147+2115_X_a_map.fits wmodel /image_prod/ug002_uvm//J0147+2115_X_a_map.mod ! Writing 494 model components to file: /image_prod/ug002_uvm//J0147+2115_X_a_map.mod wobs /image_prod/ug002_uvm//J0147+2115_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J0147+2115_X_a_uvs.fits wwins /image_prod/ug002_uvm//J0147+2115_X_a_map.win ! wwins: Wrote 8 windows to /image_prod/ug002_uvm//J0147+2115_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0647214 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000113504 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.526121 0.526121 1.05224 2.10449 4.20897 8.41794 16.8359 33.6718 67.3436 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.064 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 570.21 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J0147+2115_X_a_dfm.log closed on Wed Mar 4 16:29:18 2020