! Started logfile: /image_prod/ug002_uvm//J0126-0120_S_a_dfm.log on Wed Mar  4 16:28:13 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uvm//J0126-0120_S_a_uvm.fits
! Reading UV FITS file: /image_prod/ug002_uvm//J0126-0120_S_a_uvm.fits
! AN table 1: 100 integrations on 1 of 1 possible baselines.
! AN table 2: 100 integrations on 6 of 6 possible baselines.
! AN table 3: 50 integrations on 6 of 6 possible baselines.
! AN table 4: 120 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.877444 visibilities/baseline/integration-bin.
! Found source: J0126-0120
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 14004 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0126-0120_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 200 telescope corrections were flagged in sub-array 1.
!  A total of 50 telescope corrections were flagged in sub-array 2.
!  A total of 62 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 2.
!  A total of 200 telescope corrections were flagged in sub-array 1.
!  A total of 50 telescope corrections were flagged in sub-array 2.
!  A total of 62 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 3.
!  A total of 200 telescope corrections were flagged in sub-array 1.
!  A total of 50 telescope corrections were flagged in sub-array 2.
!  A total of 62 telescope corrections were flagged in sub-array 4.
! 
! Fit before self-cal, rms=1.004097Jy  sigma=8.522023
! Fit after  self-cal, rms=0.940756Jy  sigma=7.998552
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.767 mas, bmaj=10.2 mas, bpa=15.57 degrees
! Estimated noise=1.06123 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.046783 Jy
! Component: 100  -  total flux cleaned = 0.0582998 Jy
! Total flux subtracted in 100 components = 0.0582998 Jy
! Clean residual min=-0.003553 max=0.005622 Jy/beam
! Clean residual mean=0.000011 rms=0.001169 Jy/beam
! Combined flux in latest and established models = 0.0582998 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0582998 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061980Jy  sigma=0.477335
! Fit after  self-cal, rms=0.061267Jy  sigma=0.472227
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.461 mas, bmaj=11.71 mas, bpa=14.52 degrees
! Estimated noise=0.727624 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00653902 Jy
! Component: 100  -  total flux cleaned = 0.00962916 Jy
! Component: 150  -  total flux cleaned = 0.0113828 Jy
! Component: 200  -  total flux cleaned = 0.0124601 Jy
! Total flux subtracted in 200 components = 0.0124601 Jy
! Clean residual min=-0.002426 max=0.002453 Jy/beam
! Clean residual mean=0.000002 rms=0.000715 Jy/beam
! Combined flux in latest and established models = 0.0707599 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 40 components and 0.0707599 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060676Jy  sigma=0.465665
! Fit after  self-cal, rms=0.060685Jy  sigma=0.465593
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.461 x 11.71 at 14.52 degrees (North through East)
! Clean map  min=-0.0023751  max=0.059012 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    NL        0.00*    
! 
!  A total of 150 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.94     KP        1.16     OV        0.74     PT        1.10     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.88     KP        1.11     OV        1.02     SC        1.31     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.05     FD        1.02     HN        1.00     KP        0.98     
!   LA        0.98     NL        0.95     OV        0.93     PT        1.06     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    NL        0.00*    
! 
!  A total of 150 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.06     KP        1.18     OV        0.81     PT        1.14     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.87     KP        1.15     OV        1.03     SC        1.58     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.84     FD        0.99     HN        1.02     KP        0.98     
!   LA        0.99     NL        0.90     OV        0.95     PT        1.04     
!   SC        0.78     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    NL        0.00*    
! 
!  A total of 150 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.97     KP        1.10     OV        0.80     PT        1.10     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.87     KP        1.16     OV        0.99     SC        1.23     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.38     FD        0.99     HN        1.21     KP        0.92     
!   LA        0.95     NL        1.00     OV        0.99     PT        1.02     
!   SC        1.02     
! 
! 
! Fit before self-cal, rms=0.060685Jy  sigma=0.465593
! Fit after  self-cal, rms=0.063227Jy  sigma=0.461454
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.404 mas, bmaj=11.55 mas, bpa=14.75 degrees
! Estimated noise=0.747281 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.45487e-05 Jy
! Component: 100  -  total flux cleaned = 3.76255e-06 Jy
! Component: 150  -  total flux cleaned = -1.59593e-05 Jy
! Component: 200  -  total flux cleaned = -3.38552e-05 Jy
! Total flux subtracted in 200 components = -3.38552e-05 Jy
! Clean residual min=-0.001579 max=0.001630 Jy/beam
! Clean residual mean=-0.000001 rms=0.000415 Jy/beam
! Combined flux in latest and established models = 0.070726 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 47 components and 0.070726 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063215Jy  sigma=0.461348
! Fit after  self-cal, rms=0.063372Jy  sigma=0.460964
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063372Jy  sigma=0.460964
! Fit after  self-cal, rms=0.064199Jy  sigma=0.460088
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.408 mas, bmaj=11.53 mas, bpa=14.84 degrees
! Estimated noise=0.746256 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.01623e-08 Jy
! Component: 100  -  total flux cleaned = -6.50357e-07 Jy
! Component: 150  -  total flux cleaned = 2.07602e-07 Jy
! Component: 200  -  total flux cleaned = 1.1853e-06 Jy
! Total flux subtracted in 200 components = 1.1853e-06 Jy
! Clean residual min=-0.001222 max=0.001480 Jy/beam
! Clean residual mean=0.000001 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.0707272 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 50 components and 0.0707272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064192Jy  sigma=0.460034
! Fit after  self-cal, rms=0.064235Jy  sigma=0.459997
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (17.5, 47.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000743607 Jy
! Component: 100  -  total flux cleaned = 0.000684942 Jy
! Component: 150  -  total flux cleaned = 0.000633809 Jy
! Component: 200  -  total flux cleaned = 0.000588687 Jy
! Total flux subtracted in 200 components = 0.000588687 Jy
! Clean residual min=-0.001220 max=0.001168 Jy/beam
! Clean residual mean=0.000001 rms=0.000310 Jy/beam
! Combined flux in latest and established models = 0.0713159 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 75 components and 0.0713159 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064192Jy  sigma=0.459758
! Fit after  self-cal, rms=0.064188Jy  sigma=0.459726
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064188Jy  sigma=0.459726
! Fit after  self-cal, rms=0.064121Jy  sigma=0.459703
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.401 mas, bmaj=11.54 mas, bpa=14.91 degrees
! Estimated noise=0.744986 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.30759e-05 Jy
! Component: 100  -  total flux cleaned = 8.33061e-05 Jy
! Component: 150  -  total flux cleaned = 8.26248e-05 Jy
! Component: 200  -  total flux cleaned = 9.96049e-05 Jy
! Total flux subtracted in 200 components = 9.96049e-05 Jy
! Clean residual min=-0.001231 max=0.001132 Jy/beam
! Clean residual mean=0.000001 rms=0.000299 Jy/beam
! Combined flux in latest and established models = 0.0714155 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 87 components and 0.0714155 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064104Jy  sigma=0.459616
! Fit after  self-cal, rms=0.064104Jy  sigma=0.459608
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.91473e-05 Jy
! Component: 100  -  total flux cleaned = 5.29558e-05 Jy
! Component: 150  -  total flux cleaned = 0.000100339 Jy
! Component: 200  -  total flux cleaned = 0.000144793 Jy
! Total flux subtracted in 200 components = 0.000144793 Jy
! Clean residual min=-0.001206 max=0.001124 Jy/beam
! Clean residual mean=0.000001 rms=0.000294 Jy/beam
! Combined flux in latest and established models = 0.0715603 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 96 components and 0.0715603 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064095Jy  sigma=0.459553
! Fit after  self-cal, rms=0.064092Jy  sigma=0.459551
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064092Jy  sigma=0.459551
! Fit after  self-cal, rms=0.064080Jy  sigma=0.459542
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.401 mas, bmaj=15.49 mas, bpa=3.133 degrees
! Estimated noise=0.819175 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000301797 Jy
! Component: 100  -  total flux cleaned = 0.000427521 Jy
! Component: 150  -  total flux cleaned = 0.000487675 Jy
! Component: 200  -  total flux cleaned = 0.000494838 Jy
! Total flux subtracted in 200 components = 0.000494838 Jy
! Clean residual min=-0.001055 max=0.001012 Jy/beam
! Clean residual mean=0.000001 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.0720551 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 111 components and 0.0720551 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064079Jy  sigma=0.459521
! Fit after  self-cal, rms=0.064076Jy  sigma=0.459518
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.77966e-05 Jy
! Component: 100  -  total flux cleaned = 6.9479e-05 Jy
! Component: 150  -  total flux cleaned = 7.62307e-05 Jy
! Component: 200  -  total flux cleaned = 8.85981e-05 Jy
! Total flux subtracted in 200 components = 8.85981e-05 Jy
! Clean residual min=-0.001052 max=0.000994 Jy/beam
! Clean residual mean=0.000001 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.0721437 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 122 components and 0.0721437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064075Jy  sigma=0.459508
! Fit after  self-cal, rms=0.064074Jy  sigma=0.459507
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.398 mas, bmaj=11.54 mas, bpa=14.93 degrees
! Estimated noise=0.744731 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.398 x 11.54 at 14.93 degrees (North through East)
! Clean map  min=-0.0014171  max=0.059248 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.786 mas, bmaj=10.21 mas, bpa=15.81 degrees
! Estimated noise=1.08816 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0477401 Jy
! Component: 100  -  total flux cleaned = 0.0589951 Jy
! Component: 150  -  total flux cleaned = 0.0635288 Jy
! Component: 200  -  total flux cleaned = 0.0661913 Jy
! Total flux subtracted in 200 components = 0.0661913 Jy
! Clean residual min=-0.002150 max=0.002159 Jy/beam
! Clean residual mean=0.000004 rms=0.000567 Jy/beam
! Combined flux in latest and established models = 0.0661913 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.0661913 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.398 mas, bmaj=11.54 mas, bpa=14.93 degrees
! Estimated noise=0.744731 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0021437 Jy
! Component: 100  -  total flux cleaned = 0.00307788 Jy
! Component: 150  -  total flux cleaned = 0.00343024 Jy
! Component: 200  -  total flux cleaned = 0.00350222 Jy
! Total flux subtracted in 200 components = 0.00350222 Jy
! Clean residual min=-0.001265 max=0.001407 Jy/beam
! Clean residual mean=0.000002 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.0696935 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 49 components and 0.0696935 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.401 mas, bmaj=15.49 mas, bpa=3.133 degrees
! Estimated noise=0.819175 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000812662 Jy
! Component: 100  -  total flux cleaned = 0.00118098 Jy
! Component: 150  -  total flux cleaned = 0.00130508 Jy
! Component: 200  -  total flux cleaned = 0.0013598 Jy
! Total flux subtracted in 200 components = 0.0013598 Jy
! Clean residual min=-0.001144 max=0.001231 Jy/beam
! Clean residual mean=0.000002 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.0710533 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.89162e-05 Jy
! Component: 100  -  total flux cleaned = 0.000148331 Jy
! Component: 150  -  total flux cleaned = 0.000207038 Jy
! Component: 200  -  total flux cleaned = 0.000248218 Jy
! Total flux subtracted in 200 components = 0.000248218 Jy
! Clean residual min=-0.001121 max=0.001181 Jy/beam
! Clean residual mean=0.000002 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.0713015 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 86 components and 0.0713015 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.398 mas, bmaj=11.54 mas, bpa=14.93 degrees
! Estimated noise=0.744731 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000106098 Jy
! Component: 100  -  total flux cleaned = -0.000177623 Jy
! Component: 150  -  total flux cleaned = -0.000243891 Jy
! Component: 200  -  total flux cleaned = -0.000243836 Jy
! Total flux subtracted in 200 components = -0.000243836 Jy
! Clean residual min=-0.001169 max=0.001140 Jy/beam
! Clean residual mean=0.000001 rms=0.000308 Jy/beam
! Combined flux in latest and established models = 0.0710577 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 102 components and 0.0710577 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064095Jy  sigma=0.459661
! Fit after  self-cal, rms=0.064095Jy  sigma=0.459648
wmodel J0126-0120_S_a_map.mod
! Writing 102 model components to file: J0126-0120_S_a_map.mod
wobs   J0126-0120_S_a_uvs.fits
! Writing UV FITS file: J0126-0120_S_a_uvs.fits
wwins  J0126-0120_S_a_map.win
! wwins: Wrote 2 windows to J0126-0120_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 6.15721e-05 Jy
! Component: 100  -  total flux cleaned = 0.000160599 Jy
! Component: 150  -  total flux cleaned = 0.000217284 Jy
! Component: 200  -  total flux cleaned = 0.000325732 Jy
! Component: 250  -  total flux cleaned = 0.000429928 Jy
! Component: 300  -  total flux cleaned = 0.000563888 Jy
! Component: 350  -  total flux cleaned = 0.000709247 Jy
! Component: 400  -  total flux cleaned = 0.000849378 Jy
! Component: 450  -  total flux cleaned = 0.000970342 Jy
! Component: 500  -  total flux cleaned = 0.00108791 Jy
! Component: 550  -  total flux cleaned = 0.00123093 Jy
! Component: 600  -  total flux cleaned = 0.00135655 Jy
! Component: 650  -  total flux cleaned = 0.0015061 Jy
! Component: 700  -  total flux cleaned = 0.00162551 Jy
! Component: 750  -  total flux cleaned = 0.00175556 Jy
! Component: 800  -  total flux cleaned = 0.00188306 Jy
! Component: 850  -  total flux cleaned = 0.002033 Jy
! Component: 900  -  total flux cleaned = 0.00213081 Jy
! Component: 950  -  total flux cleaned = 0.00222702 Jy
! Component: 1000  -  total flux cleaned = 0.0023099 Jy
! Component: 1050  -  total flux cleaned = 0.00244917 Jy
! Component: 1100  -  total flux cleaned = 0.00250607 Jy
! Component: 1150  -  total flux cleaned = 0.00258492 Jy
! Component: 1200  -  total flux cleaned = 0.00267353 Jy
! Component: 1250  -  total flux cleaned = 0.00273904 Jy
! Component: 1300  -  total flux cleaned = 0.00282496 Jy
! Component: 1350  -  total flux cleaned = 0.00288871 Jy
! Component: 1400  -  total flux cleaned = 0.00296194 Jy
! Component: 1450  -  total flux cleaned = 0.00305454 Jy
! Component: 1500  -  total flux cleaned = 0.00310515 Jy
! Component: 1550  -  total flux cleaned = 0.00318509 Jy
! Component: 1600  -  total flux cleaned = 0.00326388 Jy
! Component: 1650  -  total flux cleaned = 0.00330266 Jy
! Component: 1700  -  total flux cleaned = 0.00336028 Jy
! Component: 1750  -  total flux cleaned = 0.00339826 Jy
! Component: 1800  -  total flux cleaned = 0.00345462 Jy
! Component: 1850  -  total flux cleaned = 0.0035195 Jy
! Component: 1900  -  total flux cleaned = 0.00353776 Jy
! Component: 1950  -  total flux cleaned = 0.00353773 Jy
! Component: 2000  -  total flux cleaned = 0.00355574 Jy
! Component: 2050  -  total flux cleaned = 0.00354703 Jy
! Component: 2100  -  total flux cleaned = 0.00357354 Jy
! Component: 2150  -  total flux cleaned = 0.00359973 Jy
! Component: 2200  -  total flux cleaned = 0.00361695 Jy
! Component: 2250  -  total flux cleaned = 0.00362549 Jy
! Component: 2300  -  total flux cleaned = 0.00360852 Jy
! Component: 2350  -  total flux cleaned = 0.00360014 Jy
! Component: 2400  -  total flux cleaned = 0.00360853 Jy
! Component: 2450  -  total flux cleaned = 0.00363327 Jy
! Component: 2500  -  total flux cleaned = 0.00361693 Jy
! Component: 2550  -  total flux cleaned = 0.0036739 Jy
! Component: 2600  -  total flux cleaned = 0.00364164 Jy
! Component: 2650  -  total flux cleaned = 0.00366569 Jy
! Component: 2700  -  total flux cleaned = 0.00368161 Jy
! Component: 2750  -  total flux cleaned = 0.00368158 Jy
! Component: 2800  -  total flux cleaned = 0.00368156 Jy
! Component: 2850  -  total flux cleaned = 0.00368935 Jy
! Component: 2900  -  total flux cleaned = 0.0036894 Jy
! Component: 2950  -  total flux cleaned = 0.00367399 Jy
! Component: 3000  -  total flux cleaned = 0.00365872 Jy
! Component: 3050  -  total flux cleaned = 0.0036436 Jy
! Component: 3100  -  total flux cleaned = 0.00362095 Jy
! Component: 3150  -  total flux cleaned = 0.00359851 Jy
! Component: 3200  -  total flux cleaned = 0.00359854 Jy
! Component: 3250  -  total flux cleaned = 0.00359109 Jy
! Component: 3300  -  total flux cleaned = 0.0035764 Jy
! Component: 3350  -  total flux cleaned = 0.00357642 Jy
! Component: 3400  -  total flux cleaned = 0.0035692 Jy
! Component: 3450  -  total flux cleaned = 0.00356926 Jy
! Component: 3500  -  total flux cleaned = 0.00354063 Jy
! Component: 3550  -  total flux cleaned = 0.00356915 Jy
! Component: 3600  -  total flux cleaned = 0.00356913 Jy
! Component: 3650  -  total flux cleaned = 0.00354102 Jy
! Component: 3700  -  total flux cleaned = 0.00357609 Jy
! Component: 3750  -  total flux cleaned = 0.00353431 Jy
! Component: 3800  -  total flux cleaned = 0.00353437 Jy
! Component: 3850  -  total flux cleaned = 0.00354813 Jy
! Component: 3900  -  total flux cleaned = 0.00353442 Jy
! Component: 3950  -  total flux cleaned = 0.00350718 Jy
! Component: 4000  -  total flux cleaned = 0.00350715 Jy
! Component: 4050  -  total flux cleaned = 0.00350711 Jy
! Total flux subtracted in 4096 components = 0.00349365 Jy
! Clean residual min=-0.000442 max=0.000347 Jy/beam
! Clean residual mean=0.000000 rms=0.000126 Jy/beam
! Combined flux in latest and established models = 0.0745513 Jy
keep
! Adding 245 model components to the UV plane model.
! The established model now contains 347 components and 0.0745513 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uvm//J0126-0120_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.398 x 11.54 at 14.93 degrees (North through East)
! Clean map  min=-0.0010091  max=0.060139 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uvm//J0126-0120_S_a_map.fits
wmodel /image_prod/ug002_uvm//J0126-0120_S_a_map.mod
! Writing 347 model components to file: /image_prod/ug002_uvm//J0126-0120_S_a_map.mod
wobs   /image_prod/ug002_uvm//J0126-0120_S_a_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uvm//J0126-0120_S_a_uvs.fits
wwins  /image_prod/ug002_uvm//J0126-0120_S_a_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uvm//J0126-0120_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0601394 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000125618 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.626633 0.626633 1.25327 2.50653 5.01306 10.0261 20.0523 40.1045 80.209
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.06 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  478.749 
quit
! Quitting program
! Log file /image_prod/ug002_uvm//J0126-0120_S_a_dfm.log closed on Wed Mar  4 16:28:18 2020