! Started logfile: /image_prod/ug002_uvm//J0122-0018_X_a_dfm.log on Wed Mar 4 16:28:06 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J0122-0018_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J0122-0018_X_a_uvm.fits ! AN table 1: 50 integrations on 36 of 36 possible baselines. ! AN table 2: 25 integrations on 36 of 36 possible baselines. ! AN table 3: 40 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.936232 visibilities/baseline/integration-bin. ! Found source: J0122-0018 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 46512 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0122-0018_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 44 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 44 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 44 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 44 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 44 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 44 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 44 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 44 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 44 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 44 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 44 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 44 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.008719Jy sigma=9.435641 ! Fit after self-cal, rms=0.900485Jy sigma=8.443280 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.682 mas, bmaj=1.707 mas, bpa=-0.9092 degrees ! Estimated noise=0.681969 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.075574 Jy ! Component: 100 - total flux cleaned = 0.0959334 Jy ! Total flux subtracted in 100 components = 0.0959334 Jy ! Clean residual min=-0.005682 max=0.021683 Jy/beam ! Clean residual mean=-0.000001 rms=0.001744 Jy/beam ! Combined flux in latest and established models = 0.0959333 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0959333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069537Jy sigma=0.619563 ! Fit after self-cal, rms=0.069444Jy sigma=0.618711 ! Inverting map ! Added new window around map position (7.4, 2.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0213198 Jy ! Component: 100 - total flux cleaned = 0.0323794 Jy ! Total flux subtracted in 100 components = 0.0323794 Jy ! Clean residual min=-0.004489 max=0.007803 Jy/beam ! Clean residual mean=-0.000000 rms=0.001092 Jy/beam ! Combined flux in latest and established models = 0.128313 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 18 components and 0.128313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060768Jy sigma=0.526027 ! Fit after self-cal, rms=0.060062Jy sigma=0.519830 ! Inverting map ! Added new window around map position (8.4, 3.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00999821 Jy ! Component: 100 - total flux cleaned = 0.016795 Jy ! Total flux subtracted in 100 components = 0.016795 Jy ! Clean residual min=-0.003714 max=0.004933 Jy/beam ! Clean residual mean=0.000000 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 0.145108 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 24 components and 0.145108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057428Jy sigma=0.491131 ! Fit after self-cal, rms=0.057257Jy sigma=0.489629 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00581279 Jy ! Component: 100 - total flux cleaned = 0.0101559 Jy ! Total flux subtracted in 100 components = 0.0101559 Jy ! Clean residual min=-0.003328 max=0.003866 Jy/beam ! Clean residual mean=0.000000 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.155264 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 34 components and 0.155264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056213Jy sigma=0.478276 ! Fit after self-cal, rms=0.056159Jy sigma=0.477842 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8548 mas, bmaj=1.986 mas, bpa=1.526 degrees ! Estimated noise=0.373836 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00664863 Jy ! Component: 100 - total flux cleaned = 0.0106736 Jy ! Component: 150 - total flux cleaned = 0.0135258 Jy ! Component: 200 - total flux cleaned = 0.0156816 Jy ! Total flux subtracted in 200 components = 0.0156816 Jy ! Clean residual min=-0.002547 max=0.003726 Jy/beam ! Clean residual mean=0.000000 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.170945 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 58 components and 0.170945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055300Jy sigma=0.468563 ! Fit after self-cal, rms=0.055203Jy sigma=0.467657 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8548 x 1.986 at 1.526 degrees (North through East) ! Clean map min=-0.0024525 max=0.098092 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.02 HN 0.95 KP 1.04 ! LA 1.06 MK 1.00 NL 1.17 OV 0.88 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.02 HN 1.06 KP 1.10 ! LA 1.02 MK 1.08 OV 0.90 PT 0.93 ! SC 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.99 HN 1.02 KP 0.97 ! LA 1.00* NL 1.01 OV 0.94 PT 1.01 ! SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.01 HN 0.97 KP 1.04 ! LA 1.03 MK 1.02 NL 1.16 OV 0.91 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 1.02 HN 1.09 KP 1.06 ! LA 1.02 MK 1.09 OV 0.92 PT 0.95 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.00 HN 0.99 KP 1.00 ! LA 1.00* NL 1.02 OV 0.96 PT 1.03 ! SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00 HN 0.93 KP 1.07 ! LA 1.06 MK 1.01 NL 1.15 OV 0.90 ! SC 1.08 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 1.02 HN 1.09 KP 1.05 ! LA 1.02 MK 1.09 OV 0.88 PT 0.95 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 0.99 HN 1.03 KP 0.99 ! LA 1.00* NL 0.98 OV 0.96 PT 1.01 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 0.94 KP 1.04 ! LA 1.00 MK 1.01 NL 1.15 OV 0.89 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.97 HN 1.01 KP 1.12 ! LA 0.99 MK 1.06 OV 0.91 PT 0.88 ! SC 1.08 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.01 HN 1.01 KP 0.95 ! LA 1.00* NL 1.01 OV 0.96 PT 1.02 ! SC 0.94 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 HN 0.95 KP 1.01 ! LA 1.01 MK 1.01 NL 1.14 OV 0.91 ! SC 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.00 HN 1.07 KP 1.05 ! LA 0.98 MK 1.14 OV 0.92 PT 0.88 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 1.00 HN 1.02 KP 0.96 ! LA 1.00* NL 1.02 OV 0.95 PT 0.89 ! SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 0.95 KP 1.03 ! LA 0.98 MK 1.00 NL 1.11 OV 0.92 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.99 HN 1.07 KP 1.03 ! LA 1.03 MK 1.10 OV 0.93 PT 0.86 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.02 HN 0.99 KP 0.95 ! LA 1.00* NL 1.01 OV 0.97 PT 1.02 ! SC 0.96 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.02 HN 0.96 KP 1.03 ! LA 1.03 MK 0.98 NL 1.13 OV 0.89 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.01 HN 0.99 KP 0.97 ! LA 1.00 MK 1.11 OV 0.92 PT 0.95 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.01 HN 1.03 KP 0.94 ! LA 1.00* NL 0.98 OV 0.95 PT 1.02 ! SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 0.98 KP 1.02 ! LA 1.04 MK 0.99 NL 1.19 OV 0.91 ! SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.98 HN 1.04 KP 1.01 ! LA 0.98 MK 1.13 OV 0.91 PT 0.94 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 0.98 HN 1.06 KP 0.95 ! LA 1.00* NL 1.01 OV 0.98 PT 1.00 ! SC 0.94 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.97 HN 0.92 KP 1.05 ! LA 1.03 MK 1.00 NL 1.16 OV 0.90 ! SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.00 HN 1.01 KP 1.05 ! LA 0.98 MK 1.10 OV 0.91 PT 0.94 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 1.02 HN 1.02 KP 0.95 ! LA 1.00* NL 1.00 OV 1.00 PT 1.00 ! SC 0.96 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.05 HN 0.93 KP 1.01 ! LA 1.00 MK 1.03 NL 1.17 OV 0.90 ! SC 1.11 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 1.01 HN 1.09 KP 1.05 ! LA 0.99 MK 1.12 OV 0.92 PT 0.91 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 1.04 HN 1.06 KP 0.97 ! LA 1.00* NL 0.97 OV 1.01 PT 0.98 ! SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.01 HN 0.97 KP 0.99 ! LA 1.02 MK 0.99 NL 1.16 OV 0.89 ! SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.88 FD 1.00 HN 1.08 KP 1.04 ! LA 0.99 MK 1.09 OV 0.90 PT 0.91 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.01 HN 0.98 KP 0.96 ! LA 1.00* NL 1.03 OV 0.96 PT 0.98 ! SC 0.97 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.05 HN 0.95 KP 1.01 ! LA 1.05 MK 0.99 NL 1.15 OV 0.89 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.00 HN 1.04 KP 1.02 ! LA 1.00 MK 1.14 OV 0.89 PT 0.92 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.01 HN 0.99 KP 0.93 ! LA 1.00* NL 0.98 OV 1.04 PT 0.97 ! SC 0.95 ! ! ! Fit before self-cal, rms=0.055203Jy sigma=0.467657 ! Fit after self-cal, rms=0.053801Jy sigma=0.459631 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8635 mas, bmaj=1.994 mas, bpa=1.901 degrees ! Estimated noise=0.370229 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9.8, 2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00232228 Jy ! Component: 100 - total flux cleaned = 0.00302189 Jy ! Component: 150 - total flux cleaned = 0.00340436 Jy ! Component: 200 - total flux cleaned = 0.00347461 Jy ! Total flux subtracted in 200 components = 0.00347461 Jy ! Clean residual min=-0.001414 max=0.002128 Jy/beam ! Clean residual mean=-0.000000 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.17442 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 82 components and 0.17442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053684Jy sigma=0.458420 ! Fit after self-cal, rms=0.053691Jy sigma=0.458156 ! Inverting map ! Added new window around map position (15.2, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203703 Jy ! Component: 100 - total flux cleaned = 0.00326269 Jy ! Component: 150 - total flux cleaned = 0.00386519 Jy ! Component: 200 - total flux cleaned = 0.00435348 Jy ! Total flux subtracted in 200 components = 0.00435348 Jy ! Clean residual min=-0.001426 max=0.001880 Jy/beam ! Clean residual mean=-0.000000 rms=0.000342 Jy/beam ! Combined flux in latest and established models = 0.178773 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 103 components and 0.178773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053599Jy sigma=0.457157 ! Fit after self-cal, rms=0.053585Jy sigma=0.457065 ! Inverting map ! Added new window around map position (6, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175937 Jy ! Component: 100 - total flux cleaned = 0.00272119 Jy ! Component: 150 - total flux cleaned = 0.00345508 Jy ! Component: 200 - total flux cleaned = 0.0041073 Jy ! Total flux subtracted in 200 components = 0.0041073 Jy ! Clean residual min=-0.001124 max=0.001199 Jy/beam ! Clean residual mean=-0.000000 rms=0.000293 Jy/beam ! Combined flux in latest and established models = 0.182881 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 130 components and 0.182881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053516Jy sigma=0.456327 ! Fit after self-cal, rms=0.053510Jy sigma=0.456280 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053510Jy sigma=0.456280 ! Fit after self-cal, rms=0.053029Jy sigma=0.455023 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8633 mas, bmaj=1.996 mas, bpa=1.952 degrees ! Estimated noise=0.370042 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000928479 Jy ! Component: 100 - total flux cleaned = 0.00152058 Jy ! Component: 150 - total flux cleaned = 0.00195339 Jy ! Component: 200 - total flux cleaned = 0.0023128 Jy ! Total flux subtracted in 200 components = 0.0023128 Jy ! Clean residual min=-0.000971 max=0.001031 Jy/beam ! Clean residual mean=0.000000 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 0.185193 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 153 components and 0.185193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053004Jy sigma=0.454764 ! Fit after self-cal, rms=0.053005Jy sigma=0.454728 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17.2, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00096181 Jy ! Component: 100 - total flux cleaned = 0.00124091 Jy ! Component: 150 - total flux cleaned = 0.00150575 Jy ! Component: 200 - total flux cleaned = 0.00176735 Jy ! Total flux subtracted in 200 components = 0.00176735 Jy ! Clean residual min=-0.000915 max=0.000921 Jy/beam ! Clean residual mean=0.000000 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.186961 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 183 components and 0.186961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052983Jy sigma=0.454487 ! Fit after self-cal, rms=0.052980Jy sigma=0.454467 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052980Jy sigma=0.454467 ! Fit after self-cal, rms=0.053023Jy sigma=0.454365 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8637 mas, bmaj=1.997 mas, bpa=1.967 degrees ! Estimated noise=0.370458 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000601969 Jy ! Component: 100 - total flux cleaned = 0.000838422 Jy ! Component: 150 - total flux cleaned = 0.00106537 Jy ! Component: 200 - total flux cleaned = 0.00127436 Jy ! Total flux subtracted in 200 components = 0.00127436 Jy ! Clean residual min=-0.000857 max=0.000885 Jy/beam ! Clean residual mean=0.000000 rms=0.000216 Jy/beam ! Combined flux in latest and established models = 0.188235 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 196 components and 0.188235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053011Jy sigma=0.454239 ! Fit after self-cal, rms=0.053010Jy sigma=0.454228 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000293143 Jy ! Component: 100 - total flux cleaned = 0.000539187 Jy ! Component: 150 - total flux cleaned = 0.000752722 Jy ! Component: 200 - total flux cleaned = 0.000938502 Jy ! Total flux subtracted in 200 components = 0.000938502 Jy ! Clean residual min=-0.000836 max=0.000886 Jy/beam ! Clean residual mean=0.000000 rms=0.000209 Jy/beam ! Combined flux in latest and established models = 0.189174 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 210 components and 0.189174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053003Jy sigma=0.454155 ! Fit after self-cal, rms=0.053002Jy sigma=0.454149 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053002Jy sigma=0.454149 ! Fit after self-cal, rms=0.053026Jy sigma=0.454139 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.095 mas, bmaj=3.187 mas, bpa=2.47 degrees ! Estimated noise=0.46334 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000500582 Jy ! Component: 100 - total flux cleaned = 0.000753786 Jy ! Component: 150 - total flux cleaned = 0.000900273 Jy ! Component: 200 - total flux cleaned = 0.00104185 Jy ! Total flux subtracted in 200 components = 0.00104185 Jy ! Clean residual min=-0.001235 max=0.001464 Jy/beam ! Clean residual mean=0.000001 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.190215 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 231 components and 0.190216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053022Jy sigma=0.454078 ! Fit after self-cal, rms=0.053022Jy sigma=0.454068 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (21.6, 6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129613 Jy ! Component: 100 - total flux cleaned = 0.00201411 Jy ! Component: 150 - total flux cleaned = 0.0024657 Jy ! Component: 200 - total flux cleaned = 0.0028851 Jy ! Total flux subtracted in 200 components = 0.0028851 Jy ! Clean residual min=-0.001068 max=0.000973 Jy/beam ! Clean residual mean=0.000001 rms=0.000273 Jy/beam ! Combined flux in latest and established models = 0.193101 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 282 components and 0.193101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053004Jy sigma=0.453869 ! Fit after self-cal, rms=0.053002Jy sigma=0.453853 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8642 mas, bmaj=1.998 mas, bpa=1.975 degrees ! Estimated noise=0.37058 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8642 x 1.998 at 1.975 degrees (North through East) ! Clean map min=-0.00074388 max=0.097089 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6892 mas, bmaj=1.71 mas, bpa=-0.3981 degrees ! Estimated noise=0.68416 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0754254 Jy ! Component: 100 - total flux cleaned = 0.102436 Jy ! Component: 150 - total flux cleaned = 0.119993 Jy ! Component: 200 - total flux cleaned = 0.132463 Jy ! Total flux subtracted in 200 components = 0.132463 Jy ! Clean residual min=-0.003344 max=0.007011 Jy/beam ! Clean residual mean=-0.000000 rms=0.000909 Jy/beam ! Combined flux in latest and established models = 0.132463 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.132463 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8642 mas, bmaj=1.998 mas, bpa=1.975 degrees ! Estimated noise=0.37058 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132287 Jy ! Component: 100 - total flux cleaned = 0.021517 Jy ! Component: 150 - total flux cleaned = 0.0275302 Jy ! Component: 200 - total flux cleaned = 0.0319974 Jy ! Total flux subtracted in 200 components = 0.0319974 Jy ! Clean residual min=-0.001940 max=0.002614 Jy/beam ! Clean residual mean=0.000001 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.16446 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 47 components and 0.16446 Jy ! Inverting map ! Added new window around map position (14.8, -9.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00355274 Jy ! Component: 100 - total flux cleaned = 0.00646855 Jy ! Component: 150 - total flux cleaned = 0.00889581 Jy ! Component: 200 - total flux cleaned = 0.0109544 Jy ! Total flux subtracted in 200 components = 0.0109544 Jy ! Clean residual min=-0.001312 max=0.001580 Jy/beam ! Clean residual mean=0.000001 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.175415 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 76 components and 0.175415 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.095 mas, bmaj=3.187 mas, bpa=2.47 degrees ! Estimated noise=0.46334 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0031438 Jy ! Component: 100 - total flux cleaned = 0.00541737 Jy ! Component: 150 - total flux cleaned = 0.00711786 Jy ! Component: 200 - total flux cleaned = 0.00840847 Jy ! Total flux subtracted in 200 components = 0.00840847 Jy ! Clean residual min=-0.001546 max=0.001408 Jy/beam ! Clean residual mean=0.000001 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.183823 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124224 Jy ! Component: 100 - total flux cleaned = 0.00231858 Jy ! Component: 150 - total flux cleaned = 0.00327927 Jy ! Component: 200 - total flux cleaned = 0.00407229 Jy ! Total flux subtracted in 200 components = 0.00407229 Jy ! Clean residual min=-0.001317 max=0.001134 Jy/beam ! Clean residual mean=0.000001 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.187895 Jy ! Adding 123 model components to the UV plane model. ! The established model now contains 183 components and 0.187895 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8642 mas, bmaj=1.998 mas, bpa=1.975 degrees ! Estimated noise=0.37058 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00084116 Jy ! Component: 100 - total flux cleaned = 0.0014656 Jy ! Component: 150 - total flux cleaned = 0.00197489 Jy ! Component: 200 - total flux cleaned = 0.00239677 Jy ! Total flux subtracted in 200 components = 0.00239677 Jy ! Clean residual min=-0.000892 max=0.000761 Jy/beam ! Clean residual mean=0.000000 rms=0.000200 Jy/beam ! Combined flux in latest and established models = 0.190292 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 218 components and 0.190292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053048Jy sigma=0.454214 ! Fit after self-cal, rms=0.053035Jy sigma=0.454159 wmodel J0122-0018_X_a_map.mod ! Writing 218 model components to file: J0122-0018_X_a_map.mod wobs J0122-0018_X_a_uvs.fits ! Writing UV FITS file: J0122-0018_X_a_uvs.fits wwins J0122-0018_X_a_map.win ! wwins: Wrote 9 windows to J0122-0018_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000127583 Jy ! Component: 100 - total flux cleaned = -0.000181945 Jy ! Component: 150 - total flux cleaned = -0.000155985 Jy ! Component: 200 - total flux cleaned = -0.000143708 Jy ! Component: 250 - total flux cleaned = -0.000143331 Jy ! Component: 300 - total flux cleaned = -8.29018e-05 Jy ! Component: 350 - total flux cleaned = -4.79123e-05 Jy ! Component: 400 - total flux cleaned = -7.07203e-05 Jy ! Component: 450 - total flux cleaned = -7.04979e-05 Jy ! Component: 500 - total flux cleaned = -8.1471e-05 Jy ! Component: 550 - total flux cleaned = -7.06073e-05 Jy ! Component: 600 - total flux cleaned = -0.000102499 Jy ! Component: 650 - total flux cleaned = -8.15672e-05 Jy ! Component: 700 - total flux cleaned = -0.000102227 Jy ! Component: 750 - total flux cleaned = -0.000112425 Jy ! Component: 800 - total flux cleaned = -0.000132298 Jy ! Component: 850 - total flux cleaned = -0.000151767 Jy ! Component: 900 - total flux cleaned = -0.000151668 Jy ! Component: 950 - total flux cleaned = -0.00016121 Jy ! Component: 1000 - total flux cleaned = -0.000161152 Jy ! Component: 1050 - total flux cleaned = -0.000142595 Jy ! Component: 1100 - total flux cleaned = -0.000105915 Jy ! Component: 1150 - total flux cleaned = -0.000105871 Jy ! Component: 1200 - total flux cleaned = -7.89946e-05 Jy ! Component: 1250 - total flux cleaned = -4.33476e-05 Jy ! Component: 1300 - total flux cleaned = -2.5811e-05 Jy ! Component: 1350 - total flux cleaned = 2.17781e-07 Jy ! Component: 1400 - total flux cleaned = -2.5561e-05 Jy ! Component: 1450 - total flux cleaned = 2.56644e-05 Jy ! Component: 1500 - total flux cleaned = 1.72717e-05 Jy ! Component: 1550 - total flux cleaned = 4.24845e-05 Jy ! Component: 1600 - total flux cleaned = 7.5681e-05 Jy ! Component: 1650 - total flux cleaned = 7.56851e-05 Jy ! Component: 1700 - total flux cleaned = 0.000100017 Jy ! Component: 1750 - total flux cleaned = 0.000108053 Jy ! Component: 1800 - total flux cleaned = 0.000115978 Jy ! Component: 1850 - total flux cleaned = 0.000139623 Jy ! Component: 1900 - total flux cleaned = 0.000139512 Jy ! Component: 1950 - total flux cleaned = 0.000162846 Jy ! Component: 2000 - total flux cleaned = 0.000185905 Jy ! Component: 2050 - total flux cleaned = 0.000193518 Jy ! Component: 2100 - total flux cleaned = 0.000223804 Jy ! Component: 2150 - total flux cleaned = 0.000261284 Jy ! Component: 2200 - total flux cleaned = 0.000276141 Jy ! Component: 2250 - total flux cleaned = 0.000276261 Jy ! Component: 2300 - total flux cleaned = 0.000305461 Jy ! Component: 2350 - total flux cleaned = 0.000298212 Jy ! Component: 2400 - total flux cleaned = 0.000348734 Jy ! Component: 2450 - total flux cleaned = 0.000348644 Jy ! Component: 2500 - total flux cleaned = 0.000355682 Jy ! Component: 2550 - total flux cleaned = 0.000362769 Jy ! Component: 2600 - total flux cleaned = 0.000390835 Jy ! Component: 2650 - total flux cleaned = 0.000418731 Jy ! Component: 2700 - total flux cleaned = 0.000425608 Jy ! Component: 2750 - total flux cleaned = 0.000425561 Jy ! Component: 2800 - total flux cleaned = 0.000432349 Jy ! Component: 2850 - total flux cleaned = 0.000445958 Jy ! Component: 2900 - total flux cleaned = 0.000466074 Jy ! Component: 2950 - total flux cleaned = 0.000459424 Jy ! Component: 3000 - total flux cleaned = 0.000452786 Jy ! Component: 3050 - total flux cleaned = 0.000472533 Jy ! Component: 3100 - total flux cleaned = 0.000446267 Jy ! Component: 3150 - total flux cleaned = 0.000459346 Jy ! Component: 3200 - total flux cleaned = 0.000459334 Jy ! Component: 3250 - total flux cleaned = 0.000465804 Jy ! Component: 3300 - total flux cleaned = 0.000459378 Jy ! Component: 3350 - total flux cleaned = 0.000472143 Jy ! Component: 3400 - total flux cleaned = 0.000484773 Jy ! Component: 3450 - total flux cleaned = 0.000484776 Jy ! Component: 3500 - total flux cleaned = 0.000472211 Jy ! Component: 3550 - total flux cleaned = 0.000459757 Jy ! Component: 3600 - total flux cleaned = 0.000496847 Jy ! Component: 3650 - total flux cleaned = 0.00047221 Jy ! Component: 3700 - total flux cleaned = 0.000496738 Jy ! Component: 3750 - total flux cleaned = 0.000527144 Jy ! Component: 3800 - total flux cleaned = 0.000533192 Jy ! Component: 3850 - total flux cleaned = 0.000533132 Jy ! Component: 3900 - total flux cleaned = 0.000539136 Jy ! Component: 3950 - total flux cleaned = 0.000562985 Jy ! Component: 4000 - total flux cleaned = 0.000568897 Jy ! Component: 4050 - total flux cleaned = 0.000568855 Jy ! Total flux subtracted in 4096 components = 0.000592365 Jy ! Clean residual min=-0.000338 max=0.000416 Jy/beam ! Clean residual mean=0.000000 rms=0.000101 Jy/beam ! Combined flux in latest and established models = 0.190884 Jy keep ! Adding 312 model components to the UV plane model. ! The established model now contains 530 components and 0.190884 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J0122-0018_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8642 x 1.998 at 1.975 degrees (North through East) ! Clean map min=-0.00051397 max=0.096829 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J0122-0018_X_a_map.fits wmodel /image_prod/ug002_uvm//J0122-0018_X_a_map.mod ! Writing 530 model components to file: /image_prod/ug002_uvm//J0122-0018_X_a_map.mod wobs /image_prod/ug002_uvm//J0122-0018_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J0122-0018_X_a_uvs.fits wwins /image_prod/ug002_uvm//J0122-0018_X_a_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uvm//J0122-0018_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0968293 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 9.99548e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.309684 0.309684 0.619367 1.23873 2.47747 4.95494 9.90987 19.8197 39.6395 79.279 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.096 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 968.73 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J0122-0018_X_a_dfm.log closed on Wed Mar 4 16:28:12 2020