! Started logfile: J2359-3133_S_2017_08_12_pus_uvs.log on Fri May 10 15:10:41 2019 obs J2359-3133_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J2359-3133_S_2017_08_12_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.215385 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2359-3133 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 504 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2359-3133_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.466262Jy sigma=0.003023 ! Fit after self-cal, rms=0.429150Jy sigma=0.002786 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.643 mas, bmaj=20.24 mas, bpa=8.668 degrees ! Estimated noise=7267.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.446144 Jy ! Component: 100 - total flux cleaned = 0.543805 Jy ! Total flux subtracted in 100 components = 0.543805 Jy ! Clean residual min=-0.026476 max=0.029361 Jy/beam ! Clean residual mean=0.000009 rms=0.009020 Jy/beam ! Combined flux in latest and established models = 0.543805 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.543805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114821Jy sigma=0.000721 ! Fit after self-cal, rms=0.114820Jy sigma=0.000721 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.066 mas, bmaj=21.89 mas, bpa=8.48 degrees ! Estimated noise=6575.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0262187 Jy ! Component: 100 - total flux cleaned = 0.0274295 Jy ! Component: 150 - total flux cleaned = 0.028401 Jy ! Component: 200 - total flux cleaned = 0.028465 Jy ! Total flux subtracted in 200 components = 0.028465 Jy ! Clean residual min=-0.018748 max=0.019585 Jy/beam ! Clean residual mean=-0.000010 rms=0.004653 Jy/beam ! Combined flux in latest and established models = 0.57227 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 48 components and 0.57227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101199Jy sigma=0.000630 ! Fit after self-cal, rms=0.100477Jy sigma=0.000625 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.05 ! LA 0.98 MK 1.00* NL 1.00* OV 1.00 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.02 ! LA 0.98 MK 1.00* NL 1.00* OV 1.03 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.97 ! LA 0.97 MK 1.00* NL 1.01 OV 0.98 ! PT 1.00* SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.100477Jy sigma=0.000625 ! Fit after self-cal, rms=0.098274Jy sigma=0.000615 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.081 mas, bmaj=21.7 mas, bpa=8.444 degrees ! Estimated noise=6631.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00514634 Jy ! Component: 100 - total flux cleaned = 0.00519409 Jy ! Component: 150 - total flux cleaned = 0.00520408 Jy ! Component: 200 - total flux cleaned = 0.00490188 Jy ! Total flux subtracted in 200 components = 0.00490188 Jy ! Clean residual min=-0.005213 max=0.005120 Jy/beam ! Clean residual mean=-0.000005 rms=0.001633 Jy/beam ! Combined flux in latest and established models = 0.577171 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 86 components and 0.577171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096342Jy sigma=0.000603 ! Fit after self-cal, rms=0.096290Jy sigma=0.000602 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096290Jy sigma=0.000602 ! Fit after self-cal, rms=0.095655Jy sigma=0.000601 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=21.73 mas, bpa=8.432 degrees ! Estimated noise=6597.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000471213 Jy ! Component: 100 - total flux cleaned = -0.00195357 Jy ! Component: 150 - total flux cleaned = -0.00190969 Jy ! Component: 200 - total flux cleaned = -0.00168059 Jy ! Total flux subtracted in 200 components = -0.00168059 Jy ! Clean residual min=-0.001820 max=0.001849 Jy/beam ! Clean residual mean=0.000002 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.575491 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 122 components and 0.575491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095207Jy sigma=0.000598 ! Fit after self-cal, rms=0.095182Jy sigma=0.000598 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000610707 Jy ! Component: 100 - total flux cleaned = 0.00101096 Jy ! Component: 150 - total flux cleaned = 0.00100505 Jy ! Component: 200 - total flux cleaned = 0.00100577 Jy ! Total flux subtracted in 200 components = 0.00100577 Jy ! Clean residual min=-0.001483 max=0.001499 Jy/beam ! Clean residual mean=-0.000009 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.576496 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 157 components and 0.576496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095045Jy sigma=0.000597 ! Fit after self-cal, rms=0.095028Jy sigma=0.000597 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095028Jy sigma=0.000597 ! Fit after self-cal, rms=0.095001Jy sigma=0.000596 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=21.75 mas, bpa=8.433 degrees ! Estimated noise=6600.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000271875 Jy ! Component: 100 - total flux cleaned = 0.000689166 Jy ! Component: 150 - total flux cleaned = 0.000764832 Jy ! Component: 200 - total flux cleaned = 0.000763763 Jy ! Total flux subtracted in 200 components = 0.000763763 Jy ! Clean residual min=-0.001145 max=0.001144 Jy/beam ! Clean residual mean=-0.000005 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.57726 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 181 components and 0.57726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094892Jy sigma=0.000595 ! Fit after self-cal, rms=0.094888Jy sigma=0.000595 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000825416 Jy ! Component: 100 - total flux cleaned = -0.00103064 Jy ! Component: 150 - total flux cleaned = -0.00111792 Jy ! Component: 200 - total flux cleaned = -0.00103621 Jy ! Total flux subtracted in 200 components = -0.00103621 Jy ! Clean residual min=-0.000695 max=0.000692 Jy/beam ! Clean residual mean=0.000002 rms=0.000236 Jy/beam ! Combined flux in latest and established models = 0.576224 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 228 components and 0.576224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094848Jy sigma=0.000595 ! Fit after self-cal, rms=0.094845Jy sigma=0.000595 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094845Jy sigma=0.000595 ! Fit after self-cal, rms=0.094824Jy sigma=0.000595 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.775 mas, bmaj=24.24 mas, bpa=-1.916 degrees ! Estimated noise=9027.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.36641e-05 Jy ! Component: 100 - total flux cleaned = -3.63805e-05 Jy ! Component: 150 - total flux cleaned = -3.14454e-05 Jy ! Component: 200 - total flux cleaned = -0.000107925 Jy ! Total flux subtracted in 200 components = -0.000107925 Jy ! Clean residual min=-0.001232 max=0.001241 Jy/beam ! Clean residual mean=0.000000 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.576116 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 260 components and 0.576116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094820Jy sigma=0.000595 ! Fit after self-cal, rms=0.094813Jy sigma=0.000595 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000714192 Jy ! Component: 100 - total flux cleaned = 0.000817228 Jy ! Component: 150 - total flux cleaned = 0.000851001 Jy ! Component: 200 - total flux cleaned = 0.000754764 Jy ! Total flux subtracted in 200 components = 0.000754764 Jy ! Clean residual min=-0.000793 max=0.000817 Jy/beam ! Clean residual mean=0.000006 rms=0.000272 Jy/beam ! Combined flux in latest and established models = 0.576871 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 302 components and 0.576871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094796Jy sigma=0.000595 ! Fit after self-cal, rms=0.094789Jy sigma=0.000595 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=21.75 mas, bpa=8.436 degrees ! Estimated noise=6600.96 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.086 x 21.75 at 8.436 degrees (North through East) ! Clean map min=-0.0139 max=0.5414 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094789Jy sigma=0.000595 ! Fit after self-cal, rms=0.073101Jy sigma=0.000448 ! Inverting map and beam ! Estimated beam: bmin=3.087 mas, bmaj=21.73 mas, bpa=8.43 degrees ! Estimated noise=6601.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00161564 Jy ! Component: 100 - total flux cleaned = 0.00200375 Jy ! Component: 150 - total flux cleaned = 0.00189308 Jy ! Component: 200 - total flux cleaned = 0.00194279 Jy ! Total flux subtracted in 200 components = 0.00194279 Jy ! Clean residual min=-0.000805 max=0.000802 Jy/beam ! Clean residual mean=-0.000004 rms=0.000283 Jy/beam ! Combined flux in latest and established models = 0.578814 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 344 components and 0.578814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072981Jy sigma=0.000448 ! Fit after self-cal, rms=0.072987Jy sigma=0.000448 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000568825 Jy ! Component: 100 - total flux cleaned = -0.000771098 Jy ! Component: 150 - total flux cleaned = -0.000826044 Jy ! Component: 200 - total flux cleaned = -0.000902188 Jy ! Total flux subtracted in 200 components = -0.000902188 Jy ! Clean residual min=-0.000403 max=0.000405 Jy/beam ! Clean residual mean=0.000002 rms=0.000149 Jy/beam ! Combined flux in latest and established models = 0.577912 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 386 components and 0.577912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072947Jy sigma=0.000448 ! Fit after self-cal, rms=0.072959Jy sigma=0.000448 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072959Jy sigma=0.000448 ! Fit after self-cal, rms=0.072994Jy sigma=0.000448 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.649 mas, bmaj=20.21 mas, bpa=8.672 degrees ! Estimated noise=7362.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.442199 Jy ! Component: 100 - total flux cleaned = 0.539268 Jy ! Component: 150 - total flux cleaned = 0.559506 Jy ! Component: 200 - total flux cleaned = 0.564235 Jy ! Total flux subtracted in 200 components = 0.564235 Jy ! Clean residual min=-0.014595 max=0.014554 Jy/beam ! Clean residual mean=0.000005 rms=0.004029 Jy/beam ! Combined flux in latest and established models = 0.564235 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.564235 Jy ! Inverting map and beam ! Estimated beam: bmin=3.088 mas, bmaj=21.72 mas, bpa=8.428 degrees ! Estimated noise=6598.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127514 Jy ! Component: 100 - total flux cleaned = 0.0135988 Jy ! Component: 150 - total flux cleaned = 0.0149217 Jy ! Component: 200 - total flux cleaned = 0.0155532 Jy ! Total flux subtracted in 200 components = 0.0155532 Jy ! Clean residual min=-0.006052 max=0.005753 Jy/beam ! Clean residual mean=0.000015 rms=0.001678 Jy/beam ! Combined flux in latest and established models = 0.579789 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 72 components and 0.579789 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.771 mas, bmaj=24.24 mas, bpa=-1.947 degrees ! Estimated noise=9019.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159664 Jy ! Component: 100 - total flux cleaned = 0.00172674 Jy ! Component: 150 - total flux cleaned = 0.00172905 Jy ! Component: 200 - total flux cleaned = 0.00173776 Jy ! Total flux subtracted in 200 components = 0.00173776 Jy ! Clean residual min=-0.003362 max=0.003256 Jy/beam ! Clean residual mean=0.000015 rms=0.001216 Jy/beam ! Combined flux in latest and established models = 0.581526 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000458155 Jy ! Component: 100 - total flux cleaned = -0.000199235 Jy ! Component: 150 - total flux cleaned = -0.000188817 Jy ! Component: 200 - total flux cleaned = -0.00018622 Jy ! Total flux subtracted in 200 components = -0.00018622 Jy ! Clean residual min=-0.007539 max=0.007522 Jy/beam ! Clean residual mean=0.000038 rms=0.002934 Jy/beam ! Combined flux in latest and established models = 0.58134 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 121 components and 0.58134 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.088 mas, bmaj=21.72 mas, bpa=8.428 degrees ! Estimated noise=6598.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000667994 Jy ! Component: 100 - total flux cleaned = 0.000653082 Jy ! Component: 150 - total flux cleaned = 0.000409932 Jy ! Component: 200 - total flux cleaned = -0.000500246 Jy ! Total flux subtracted in 200 components = -0.000500246 Jy ! Clean residual min=-0.003728 max=0.003723 Jy/beam ! Clean residual mean=-0.000009 rms=0.001083 Jy/beam ! Combined flux in latest and established models = 0.58084 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 142 components and 0.58084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073363Jy sigma=0.000451 ! Fit after self-cal, rms=0.073369Jy sigma=0.000451 wmodel J2359-3133_S_2017_08_12_pus_map.mod ! Writing 142 model components to file: J2359-3133_S_2017_08_12_pus_map.mod wobs J2359-3133_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J2359-3133_S_2017_08_12_pus_uvs.fits wwins J2359-3133_S_2017_08_12_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J2359-3133_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.088 x 21.72 at 8.428 degrees (North through East) ! Clean map min=-0.014595 max=0.542 Jy/beam ! Writing clean map to FITS file: J2359-3133_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.541998 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000982117 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.543609 0.543609 1.08722 2.17444 4.34887 8.69775 17.3955 34.791 69.582 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.541 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.088 x 21.72 at 8.428 degrees (North through East) ! Clean map min=-0.014595 max=0.542 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2359-3133_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:10:44 2019