! Started logfile: J2359-3133_S_2017_07_09_pus_uvs.log on Wed May 8 14:59:38 2019 obs J2359-3133_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J2359-3133_S_2017_07_09_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.582222 visibilities/baseline/integration-bin. ! Found source: J2359-3133 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 1048 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2359-3133_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.447232Jy sigma=0.003378 ! Fit after self-cal, rms=0.422522Jy sigma=0.003189 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.393 mas, bmaj=7.019 mas, bpa=-4.269 degrees ! Estimated noise=4483.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.450193 Jy ! Component: 100 - total flux cleaned = 0.549171 Jy ! Total flux subtracted in 100 components = 0.549171 Jy ! Clean residual min=-0.015045 max=0.032260 Jy/beam ! Clean residual mean=-0.000025 rms=0.006209 Jy/beam ! Combined flux in latest and established models = 0.549171 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.549171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106918Jy sigma=0.000792 ! Fit after self-cal, rms=0.106916Jy sigma=0.000792 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.823 mas, bmaj=7.746 mas, bpa=-5.176 degrees ! Estimated noise=3430.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0425679 Jy ! Component: 100 - total flux cleaned = 0.0618936 Jy ! Component: 150 - total flux cleaned = 0.0712611 Jy ! Component: 200 - total flux cleaned = 0.0760058 Jy ! Total flux subtracted in 200 components = 0.0760058 Jy ! Clean residual min=-0.010364 max=0.010195 Jy/beam ! Clean residual mean=-0.000058 rms=0.002861 Jy/beam ! Combined flux in latest and established models = 0.625177 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.625177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091608Jy sigma=0.000660 ! Fit after self-cal, rms=0.091619Jy sigma=0.000659 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00* KP 1.02 ! LA 0.99 MK 0.99 NL 1.00* OV 1.03 ! PT 1.03 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.00* KP 0.98 ! LA 0.96 MK 1.01 NL 1.09 OV 1.04 ! PT 0.99 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 1.00 ! LA 1.00 MK 1.01 NL 1.03 OV 0.94 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.091619Jy sigma=0.000659 ! Fit after self-cal, rms=0.088611Jy sigma=0.000628 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.848 mas, bmaj=7.8 mas, bpa=-4.013 degrees ! Estimated noise=3505.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00101686 Jy ! Component: 100 - total flux cleaned = -0.00101993 Jy ! Component: 150 - total flux cleaned = -0.00102058 Jy ! Component: 200 - total flux cleaned = -0.00095236 Jy ! Total flux subtracted in 200 components = -0.00095236 Jy ! Clean residual min=-0.009477 max=0.007865 Jy/beam ! Clean residual mean=-0.000065 rms=0.002121 Jy/beam ! Combined flux in latest and established models = 0.624224 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.624224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088553Jy sigma=0.000628 ! Fit after self-cal, rms=0.088619Jy sigma=0.000628 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088619Jy sigma=0.000628 ! Fit after self-cal, rms=0.088636Jy sigma=0.000628 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.85 mas, bmaj=7.805 mas, bpa=-4.037 degrees ! Estimated noise=3505.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00056293 Jy ! Component: 100 - total flux cleaned = -0.000560377 Jy ! Component: 150 - total flux cleaned = -0.000561007 Jy ! Component: 200 - total flux cleaned = -0.00056353 Jy ! Total flux subtracted in 200 components = -0.00056353 Jy ! Clean residual min=-0.009399 max=0.007883 Jy/beam ! Clean residual mean=-0.000066 rms=0.002113 Jy/beam ! Combined flux in latest and established models = 0.623661 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 41 components and 0.623661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088602Jy sigma=0.000628 ! Fit after self-cal, rms=0.088601Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.18943e-06 Jy ! Component: 100 - total flux cleaned = -2.95909e-06 Jy ! Component: 150 - total flux cleaned = -8.80111e-07 Jy ! Component: 200 - total flux cleaned = 2.02825e-06 Jy ! Total flux subtracted in 200 components = 2.02825e-06 Jy ! Clean residual min=-0.009370 max=0.007885 Jy/beam ! Clean residual mean=-0.000066 rms=0.002109 Jy/beam ! Combined flux in latest and established models = 0.623663 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 42 components and 0.623663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088583Jy sigma=0.000628 ! Fit after self-cal, rms=0.088582Jy sigma=0.000628 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088582Jy sigma=0.000628 ! Fit after self-cal, rms=0.088577Jy sigma=0.000628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.851 mas, bmaj=7.808 mas, bpa=-4.055 degrees ! Estimated noise=3505.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000313738 Jy ! Component: 100 - total flux cleaned = -0.000339712 Jy ! Component: 150 - total flux cleaned = -0.000342279 Jy ! Component: 200 - total flux cleaned = -0.000344122 Jy ! Total flux subtracted in 200 components = -0.000344122 Jy ! Clean residual min=-0.009325 max=0.007877 Jy/beam ! Clean residual mean=-0.000067 rms=0.002105 Jy/beam ! Combined flux in latest and established models = 0.623319 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 0.623319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088558Jy sigma=0.000628 ! Fit after self-cal, rms=0.088558Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.32757e-07 Jy ! Component: 100 - total flux cleaned = 1.38618e-07 Jy ! Component: 150 - total flux cleaned = -1.34311e-06 Jy ! Component: 200 - total flux cleaned = -3.4301e-06 Jy ! Total flux subtracted in 200 components = -3.4301e-06 Jy ! Clean residual min=-0.009309 max=0.007873 Jy/beam ! Clean residual mean=-0.000067 rms=0.002102 Jy/beam ! Combined flux in latest and established models = 0.623315 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 45 components and 0.623315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088544Jy sigma=0.000628 ! Fit after self-cal, rms=0.088544Jy sigma=0.000628 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088544Jy sigma=0.000628 ! Fit after self-cal, rms=0.088530Jy sigma=0.000628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.071 mas, bmaj=26.21 mas, bpa=-2.132 degrees ! Estimated noise=4631.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000130019 Jy ! Component: 100 - total flux cleaned = 0.000130276 Jy ! Component: 150 - total flux cleaned = 0.000130843 Jy ! Component: 200 - total flux cleaned = 0.000154145 Jy ! Total flux subtracted in 200 components = 0.000154145 Jy ! Clean residual min=-0.009305 max=0.009327 Jy/beam ! Clean residual mean=-0.000139 rms=0.003184 Jy/beam ! Combined flux in latest and established models = 0.62347 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 49 components and 0.62347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088529Jy sigma=0.000628 ! Fit after self-cal, rms=0.088521Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.65651e-05 Jy ! Component: 100 - total flux cleaned = 2.41451e-05 Jy ! Component: 150 - total flux cleaned = 2.3021e-05 Jy ! Component: 200 - total flux cleaned = 2.31318e-05 Jy ! Total flux subtracted in 200 components = 2.31318e-05 Jy ! Clean residual min=-0.009268 max=0.009316 Jy/beam ! Clean residual mean=-0.000139 rms=0.003179 Jy/beam ! Combined flux in latest and established models = 0.623493 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 51 components and 0.623493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088532Jy sigma=0.000628 ! Fit after self-cal, rms=0.088526Jy sigma=0.000628 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.852 mas, bmaj=7.809 mas, bpa=-4.067 degrees ! Estimated noise=3504.14 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.852 x 7.809 at -4.067 degrees (North through East) ! Clean map min=-0.0087048 max=0.57739 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088526Jy sigma=0.000628 ! Fit after self-cal, rms=0.083196Jy sigma=0.000581 ! Inverting map and beam ! Estimated beam: bmin=2.852 mas, bmaj=7.81 mas, bpa=-4.176 degrees ! Estimated noise=3504.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00018565 Jy ! Component: 100 - total flux cleaned = -0.000228756 Jy ! Component: 150 - total flux cleaned = -0.000208919 Jy ! Component: 200 - total flux cleaned = -0.000208578 Jy ! Total flux subtracted in 200 components = -0.000208578 Jy ! Clean residual min=-0.009180 max=0.007407 Jy/beam ! Clean residual mean=-0.000061 rms=0.002066 Jy/beam ! Combined flux in latest and established models = 0.623284 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 52 components and 0.623284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083181Jy sigma=0.000581 ! Fit after self-cal, rms=0.083180Jy sigma=0.000581 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.71647e-06 Jy ! Component: 100 - total flux cleaned = -1.4275e-06 Jy ! Component: 150 - total flux cleaned = 1.60327e-05 Jy ! Component: 200 - total flux cleaned = 1.55683e-05 Jy ! Total flux subtracted in 200 components = 1.55683e-05 Jy ! Clean residual min=-0.009157 max=0.007425 Jy/beam ! Clean residual mean=-0.000061 rms=0.002064 Jy/beam ! Combined flux in latest and established models = 0.6233 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 52 components and 0.6233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083169Jy sigma=0.000581 ! Fit after self-cal, rms=0.083168Jy sigma=0.000581 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083168Jy sigma=0.000581 ! Fit after self-cal, rms=0.083149Jy sigma=0.000581 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.434 mas, bmaj=7.125 mas, bpa=-2.843 degrees ! Estimated noise=4420.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.452404 Jy ! Component: 100 - total flux cleaned = 0.551629 Jy ! Component: 150 - total flux cleaned = 0.584338 Jy ! Component: 200 - total flux cleaned = 0.601214 Jy ! Total flux subtracted in 200 components = 0.601214 Jy ! Clean residual min=-0.009884 max=0.008482 Jy/beam ! Clean residual mean=-0.000037 rms=0.002550 Jy/beam ! Combined flux in latest and established models = 0.601214 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.601214 Jy ! Inverting map and beam ! Estimated beam: bmin=2.852 mas, bmaj=7.811 mas, bpa=-4.178 degrees ! Estimated noise=3503.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115431 Jy ! Component: 100 - total flux cleaned = 0.0167134 Jy ! Component: 150 - total flux cleaned = 0.0192083 Jy ! Component: 200 - total flux cleaned = 0.0201298 Jy ! Total flux subtracted in 200 components = 0.0201298 Jy ! Clean residual min=-0.009222 max=0.007587 Jy/beam ! Clean residual mean=-0.000063 rms=0.002116 Jy/beam ! Combined flux in latest and established models = 0.621344 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 33 components and 0.621344 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.073 mas, bmaj=26.22 mas, bpa=-2.196 degrees ! Estimated noise=4631.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000956028 Jy ! Component: 100 - total flux cleaned = 0.000997953 Jy ! Component: 150 - total flux cleaned = 0.00107349 Jy ! Component: 200 - total flux cleaned = 0.0011069 Jy ! Total flux subtracted in 200 components = 0.0011069 Jy ! Clean residual min=-0.009581 max=0.008501 Jy/beam ! Clean residual mean=-0.000129 rms=0.003194 Jy/beam ! Combined flux in latest and established models = 0.622451 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.24153e-05 Jy ! Component: 100 - total flux cleaned = 6.19321e-05 Jy ! Component: 150 - total flux cleaned = 9.00453e-05 Jy ! Component: 200 - total flux cleaned = 0.000142788 Jy ! Total flux subtracted in 200 components = 0.000142788 Jy ! Clean residual min=-0.009472 max=0.008481 Jy/beam ! Clean residual mean=-0.000129 rms=0.003183 Jy/beam ! Combined flux in latest and established models = 0.622593 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 39 components and 0.622593 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.852 mas, bmaj=7.811 mas, bpa=-4.178 degrees ! Estimated noise=3503.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000299312 Jy ! Component: 100 - total flux cleaned = -0.000476074 Jy ! Component: 150 - total flux cleaned = -0.00056677 Jy ! Component: 200 - total flux cleaned = -0.000569913 Jy ! Total flux subtracted in 200 components = -0.000569913 Jy ! Clean residual min=-0.009112 max=0.007533 Jy/beam ! Clean residual mean=-0.000063 rms=0.002092 Jy/beam ! Combined flux in latest and established models = 0.622023 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 55 components and 0.622024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083226Jy sigma=0.000581 ! Fit after self-cal, rms=0.083224Jy sigma=0.000581 wmodel J2359-3133_S_2017_07_09_pus_map.mod ! Writing 55 model components to file: J2359-3133_S_2017_07_09_pus_map.mod wobs J2359-3133_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J2359-3133_S_2017_07_09_pus_uvs.fits wwins J2359-3133_S_2017_07_09_pus_map.win ! wwins: Wrote 1 windows to J2359-3133_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00268491 Jy ! Component: 100 - total flux cleaned = -0.00329921 Jy ! Component: 150 - total flux cleaned = -0.00319381 Jy ! Component: 200 - total flux cleaned = -0.00338835 Jy ! Component: 250 - total flux cleaned = -0.0041265 Jy ! Component: 300 - total flux cleaned = -0.0042102 Jy ! Component: 350 - total flux cleaned = -0.0043771 Jy ! Component: 400 - total flux cleaned = -0.00461363 Jy ! Component: 450 - total flux cleaned = -0.00453499 Jy ! Component: 500 - total flux cleaned = -0.00431971 Jy ! Component: 550 - total flux cleaned = -0.00417998 Jy ! Component: 600 - total flux cleaned = -0.00404605 Jy ! Component: 650 - total flux cleaned = -0.0039806 Jy ! Component: 700 - total flux cleaned = -0.00379489 Jy ! Component: 750 - total flux cleaned = -0.00367637 Jy ! Component: 800 - total flux cleaned = -0.00332974 Jy ! Component: 850 - total flux cleaned = -0.00310848 Jy ! Component: 900 - total flux cleaned = -0.00294811 Jy ! Component: 950 - total flux cleaned = -0.00279099 Jy ! Component: 1000 - total flux cleaned = -0.00263792 Jy ! Component: 1050 - total flux cleaned = -0.00243665 Jy ! Component: 1100 - total flux cleaned = -0.00204754 Jy ! Component: 1150 - total flux cleaned = -0.00190632 Jy ! Component: 1200 - total flux cleaned = -0.00149007 Jy ! Component: 1250 - total flux cleaned = -0.000900015 Jy ! Component: 1300 - total flux cleaned = -0.00027642 Jy ! Component: 1350 - total flux cleaned = 0.000204543 Jy ! Component: 1400 - total flux cleaned = 0.000505691 Jy ! Component: 1450 - total flux cleaned = 0.000760477 Jy ! Component: 1500 - total flux cleaned = 0.000969999 Jy ! Component: 1550 - total flux cleaned = 0.00117706 Jy ! Component: 1600 - total flux cleaned = 0.00129976 Jy ! Component: 1650 - total flux cleaned = 0.00150241 Jy ! Component: 1700 - total flux cleaned = 0.00170333 Jy ! Component: 1750 - total flux cleaned = 0.00182262 Jy ! Component: 1800 - total flux cleaned = 0.00190175 Jy ! Component: 1850 - total flux cleaned = 0.00202007 Jy ! Component: 1900 - total flux cleaned = 0.00217598 Jy ! Component: 1950 - total flux cleaned = 0.00225344 Jy ! Component: 2000 - total flux cleaned = 0.00233043 Jy ! Component: 2050 - total flux cleaned = 0.00252168 Jy ! Component: 2100 - total flux cleaned = 0.00267438 Jy ! Component: 2150 - total flux cleaned = 0.00282613 Jy ! Component: 2200 - total flux cleaned = 0.00305277 Jy ! Component: 2250 - total flux cleaned = 0.00327838 Jy ! Component: 2300 - total flux cleaned = 0.00339049 Jy ! Component: 2350 - total flux cleaned = 0.00357735 Jy ! Component: 2400 - total flux cleaned = 0.00380078 Jy ! Component: 2450 - total flux cleaned = 0.00398673 Jy ! Component: 2500 - total flux cleaned = 0.00413501 Jy ! Component: 2550 - total flux cleaned = 0.00428337 Jy ! Component: 2600 - total flux cleaned = 0.00439437 Jy ! Component: 2650 - total flux cleaned = 0.00454253 Jy ! Component: 2700 - total flux cleaned = 0.00472742 Jy ! Component: 2750 - total flux cleaned = 0.00483832 Jy ! Component: 2800 - total flux cleaned = 0.00502282 Jy ! Component: 2850 - total flux cleaned = 0.0051705 Jy ! Component: 2900 - total flux cleaned = 0.00535508 Jy ! Component: 2950 - total flux cleaned = 0.00546586 Jy ! Component: 3000 - total flux cleaned = 0.00565088 Jy ! Component: 3050 - total flux cleaned = 0.0057992 Jy ! Component: 3100 - total flux cleaned = 0.00591039 Jy ! Component: 3150 - total flux cleaned = 0.00609632 Jy ! Component: 3200 - total flux cleaned = 0.00624549 Jy ! Component: 3250 - total flux cleaned = 0.00639479 Jy ! Component: 3300 - total flux cleaned = 0.00654458 Jy ! Component: 3350 - total flux cleaned = 0.00669488 Jy ! Component: 3400 - total flux cleaned = 0.00680798 Jy ! Component: 3450 - total flux cleaned = 0.00695898 Jy ! Component: 3500 - total flux cleaned = 0.00703496 Jy ! Component: 3550 - total flux cleaned = 0.00711108 Jy ! Component: 3600 - total flux cleaned = 0.00714965 Jy ! Component: 3650 - total flux cleaned = 0.00718821 Jy ! Component: 3700 - total flux cleaned = 0.00730426 Jy ! Component: 3750 - total flux cleaned = 0.00738185 Jy ! Component: 3800 - total flux cleaned = 0.00749887 Jy ! Component: 3850 - total flux cleaned = 0.00757732 Jy ! Component: 3900 - total flux cleaned = 0.00761667 Jy ! Component: 3950 - total flux cleaned = 0.00761652 Jy ! Component: 4000 - total flux cleaned = 0.00769637 Jy ! Component: 4050 - total flux cleaned = 0.00777697 Jy ! Total flux subtracted in 4096 components = 0.00773649 Jy ! Clean residual min=-0.002519 max=0.002804 Jy/beam ! Clean residual mean=0.000009 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.62976 Jy keep ! Adding 238 model components to the UV plane model. ! The established model now contains 293 components and 0.62976 Jy ![Exited script file: muppet] wmap "J2359-3133_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.852 x 7.811 at -4.178 degrees (North through East) ! Clean map min=-0.0046127 max=0.57966 Jy/beam ! Writing clean map to FITS file: J2359-3133_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.579664 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000801306 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.414709 0.414709 0.829419 1.65884 3.31767 6.63535 13.2707 26.5414 53.0828 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.579 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.852 x 7.811 at -4.178 degrees (North through East) ! Clean map min=-0.0046127 max=0.57966 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2359-3133_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:59:42 2019