! Started logfile: J2359-3133_S_2017_06_15_pus_uvs.log on Tue May 7 15:29:45 2019 obs J2359-3133_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J2359-3133_S_2017_06_15_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.742222 visibilities/baseline/integration-bin. ! Found source: J2359-3133 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 1336 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2359-3133_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.690252Jy sigma=0.005125 ! Fit after self-cal, rms=0.666085Jy sigma=0.004950 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.586 mas, bmaj=6.8 mas, bpa=12.73 degrees ! Estimated noise=3886.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.307564 Jy ! Component: 100 - total flux cleaned = 0.42171 Jy ! Total flux subtracted in 100 components = 0.42171 Jy ! Clean residual min=-0.036212 max=0.081437 Jy/beam ! Clean residual mean=0.000037 rms=0.015008 Jy/beam ! Combined flux in latest and established models = 0.42171 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.42171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188332Jy sigma=0.001420 ! Fit after self-cal, rms=0.188095Jy sigma=0.001418 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.07 mas, bmaj=7.885 mas, bpa=11.29 degrees ! Estimated noise=3194.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.5, -75.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0926205 Jy ! Component: 100 - total flux cleaned = 0.1311 Jy ! Component: 150 - total flux cleaned = 0.153693 Jy ! Component: 200 - total flux cleaned = 0.168111 Jy ! Total flux subtracted in 200 components = 0.168111 Jy ! Clean residual min=-0.026228 max=0.044024 Jy/beam ! Clean residual mean=0.000127 rms=0.008919 Jy/beam ! Combined flux in latest and established models = 0.589821 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 62 components and 0.589821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146706Jy sigma=0.001038 ! Fit after self-cal, rms=0.141527Jy sigma=0.000998 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.87 HN 1.00* KP 0.98 ! LA 0.99 MK 0.99 NL 1.46 OV 0.93 ! PT 0.97 SC 1.33 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 HN 1.00* KP 0.93 ! LA 0.95 MK 1.02 NL 1.57 OV 0.90 ! PT 0.95 SC 0.79 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.73 FD 0.92 HN 1.00* KP 0.91 ! LA 0.93 MK 1.03 NL 0.80 OV 0.85 ! PT 0.96 SC 1.13 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 1.00* ! LA 2.57 MK 0.97 NL 1.00* OV 1.00* ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.141527Jy sigma=0.000998 ! Fit after self-cal, rms=0.110583Jy sigma=0.000678 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.092 mas, bmaj=7.967 mas, bpa=11.39 degrees ! Estimated noise=3262.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00610845 Jy ! Component: 100 - total flux cleaned = -0.00569888 Jy ! Component: 150 - total flux cleaned = -0.00446626 Jy ! Component: 200 - total flux cleaned = -0.00431505 Jy ! Total flux subtracted in 200 components = -0.00431505 Jy ! Clean residual min=-0.014844 max=0.010290 Jy/beam ! Clean residual mean=-0.000038 rms=0.003190 Jy/beam ! Combined flux in latest and established models = 0.585506 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 72 components and 0.585506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109386Jy sigma=0.000671 ! Fit after self-cal, rms=0.109541Jy sigma=0.000669 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109541Jy sigma=0.000669 ! Fit after self-cal, rms=0.108946Jy sigma=0.000667 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.07 mas, bmaj=7.907 mas, bpa=11.83 degrees ! Estimated noise=3243.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00435308 Jy ! Component: 100 - total flux cleaned = -0.00404307 Jy ! Component: 150 - total flux cleaned = -0.00390259 Jy ! Component: 200 - total flux cleaned = -0.00390139 Jy ! Total flux subtracted in 200 components = -0.00390139 Jy ! Clean residual min=-0.013355 max=0.009189 Jy/beam ! Clean residual mean=-0.000039 rms=0.002895 Jy/beam ! Combined flux in latest and established models = 0.581604 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 79 components and 0.581604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108208Jy sigma=0.000663 ! Fit after self-cal, rms=0.108005Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000501312 Jy ! Component: 100 - total flux cleaned = -0.00036097 Jy ! Component: 150 - total flux cleaned = -0.000353797 Jy ! Component: 200 - total flux cleaned = -0.000253475 Jy ! Total flux subtracted in 200 components = -0.000253475 Jy ! Clean residual min=-0.013108 max=0.009371 Jy/beam ! Clean residual mean=-0.000039 rms=0.002817 Jy/beam ! Combined flux in latest and established models = 0.581351 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 92 components and 0.581351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107620Jy sigma=0.000661 ! Fit after self-cal, rms=0.107531Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107531Jy sigma=0.000661 ! Fit after self-cal, rms=0.109279Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.083 mas, bmaj=7.949 mas, bpa=11.49 degrees ! Estimated noise=3279.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0035476 Jy ! Component: 100 - total flux cleaned = -0.00397932 Jy ! Component: 150 - total flux cleaned = -0.00408923 Jy ! Component: 200 - total flux cleaned = -0.00409063 Jy ! Total flux subtracted in 200 components = -0.00409063 Jy ! Clean residual min=-0.012858 max=0.008740 Jy/beam ! Clean residual mean=-0.000039 rms=0.002678 Jy/beam ! Combined flux in latest and established models = 0.57726 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 100 components and 0.57726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108775Jy sigma=0.000658 ! Fit after self-cal, rms=0.108716Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000608745 Jy ! Component: 100 - total flux cleaned = -0.000800309 Jy ! Component: 150 - total flux cleaned = -0.000885942 Jy ! Component: 200 - total flux cleaned = -0.00096838 Jy ! Total flux subtracted in 200 components = -0.00096838 Jy ! Clean residual min=-0.012812 max=0.008640 Jy/beam ! Clean residual mean=-0.000038 rms=0.002621 Jy/beam ! Combined flux in latest and established models = 0.576292 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 103 components and 0.576292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108489Jy sigma=0.000657 ! Fit after self-cal, rms=0.108479Jy sigma=0.000657 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108479Jy sigma=0.000657 ! Fit after self-cal, rms=0.109800Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.966 mas, bmaj=24.98 mas, bpa=16.17 degrees ! Estimated noise=4273.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00461421 Jy ! Component: 100 - total flux cleaned = -0.00493451 Jy ! Component: 150 - total flux cleaned = -0.00501724 Jy ! Component: 200 - total flux cleaned = -0.00509419 Jy ! Total flux subtracted in 200 components = -0.00509419 Jy ! Clean residual min=-0.013906 max=0.008994 Jy/beam ! Clean residual mean=-0.000062 rms=0.003505 Jy/beam ! Combined flux in latest and established models = 0.571198 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 108 components and 0.571198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109701Jy sigma=0.000656 ! Fit after self-cal, rms=0.109675Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000481163 Jy ! Component: 100 - total flux cleaned = -0.000557468 Jy ! Component: 150 - total flux cleaned = -0.000560421 Jy ! Component: 200 - total flux cleaned = -0.000623927 Jy ! Total flux subtracted in 200 components = -0.000623927 Jy ! Clean residual min=-0.013612 max=0.008688 Jy/beam ! Clean residual mean=-0.000061 rms=0.003426 Jy/beam ! Combined flux in latest and established models = 0.570574 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 110 components and 0.570574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109666Jy sigma=0.000655 ! Fit after self-cal, rms=0.109651Jy sigma=0.000655 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.091 mas, bmaj=7.976 mas, bpa=11.29 degrees ! Estimated noise=3299.16 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.091 x 7.976 at 11.29 degrees (North through East) ! Clean map min=-0.013862 max=0.30953 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.59 mas, bmaj=6.829 mas, bpa=12.76 degrees ! Estimated noise=4042.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.318893 Jy ! Component: 100 - total flux cleaned = 0.440833 Jy ! Component: 150 - total flux cleaned = 0.49583 Jy ! Component: 200 - total flux cleaned = 0.522718 Jy ! Total flux subtracted in 200 components = 0.522718 Jy ! Clean residual min=-0.014665 max=0.016411 Jy/beam ! Clean residual mean=0.000022 rms=0.004098 Jy/beam ! Combined flux in latest and established models = 0.522718 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.522718 Jy ! Inverting map and beam ! Estimated beam: bmin=3.091 mas, bmaj=7.976 mas, bpa=11.29 degrees ! Estimated noise=3299.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0200371 Jy ! Component: 100 - total flux cleaned = 0.0314688 Jy ! Component: 150 - total flux cleaned = 0.0385656 Jy ! Component: 200 - total flux cleaned = 0.0433729 Jy ! Total flux subtracted in 200 components = 0.0433729 Jy ! Clean residual min=-0.011623 max=0.008473 Jy/beam ! Clean residual mean=-0.000018 rms=0.002508 Jy/beam ! Combined flux in latest and established models = 0.566091 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 65 components and 0.566091 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.966 mas, bmaj=24.98 mas, bpa=16.17 degrees ! Estimated noise=4273.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00371198 Jy ! Component: 100 - total flux cleaned = 0.00456643 Jy ! Component: 150 - total flux cleaned = 0.00480346 Jy ! Component: 200 - total flux cleaned = 0.00491066 Jy ! Total flux subtracted in 200 components = 0.00491066 Jy ! Clean residual min=-0.012000 max=0.008205 Jy/beam ! Clean residual mean=-0.000047 rms=0.003221 Jy/beam ! Combined flux in latest and established models = 0.571002 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000102631 Jy ! Component: 100 - total flux cleaned = 0.000101284 Jy ! Component: 150 - total flux cleaned = 7.88519e-06 Jy ! Component: 200 - total flux cleaned = -8.05643e-05 Jy ! Total flux subtracted in 200 components = -8.05643e-05 Jy ! Clean residual min=-0.011842 max=0.007561 Jy/beam ! Clean residual mean=-0.000048 rms=0.003129 Jy/beam ! Combined flux in latest and established models = 0.570921 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 72 components and 0.570921 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.091 mas, bmaj=7.976 mas, bpa=11.29 degrees ! Estimated noise=3299.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00119368 Jy ! Component: 100 - total flux cleaned = -0.00134381 Jy ! Component: 150 - total flux cleaned = -0.0012301 Jy ! Component: 200 - total flux cleaned = -0.00112335 Jy ! Total flux subtracted in 200 components = -0.00112335 Jy ! Clean residual min=-0.011239 max=0.008485 Jy/beam ! Clean residual mean=-0.000027 rms=0.002317 Jy/beam ! Combined flux in latest and established models = 0.569798 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 92 components and 0.569798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109196Jy sigma=0.000653 ! Fit after self-cal, rms=0.108931Jy sigma=0.000652 wmodel J2359-3133_S_2017_06_15_pus_map.mod ! Writing 92 model components to file: J2359-3133_S_2017_06_15_pus_map.mod wobs J2359-3133_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J2359-3133_S_2017_06_15_pus_uvs.fits wwins J2359-3133_S_2017_06_15_pus_map.win ! wwins: Wrote 3 windows to J2359-3133_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00338868 Jy ! Component: 100 - total flux cleaned = -0.00528761 Jy ! Component: 150 - total flux cleaned = -0.00699732 Jy ! Component: 200 - total flux cleaned = -0.00783181 Jy ! Component: 250 - total flux cleaned = -0.00860863 Jy ! Component: 300 - total flux cleaned = -0.0094395 Jy ! Component: 350 - total flux cleaned = -0.0103213 Jy ! Component: 400 - total flux cleaned = -0.0106988 Jy ! Component: 450 - total flux cleaned = -0.0106071 Jy ! Component: 500 - total flux cleaned = -0.0105199 Jy ! Component: 550 - total flux cleaned = -0.0102688 Jy ! Component: 600 - total flux cleaned = -0.0103496 Jy ! Component: 650 - total flux cleaned = -0.0103506 Jy ! Component: 700 - total flux cleaned = -0.0105801 Jy ! Component: 750 - total flux cleaned = -0.0108758 Jy ! Component: 800 - total flux cleaned = -0.0110195 Jy ! Component: 850 - total flux cleaned = -0.0110887 Jy ! Component: 900 - total flux cleaned = -0.0112247 Jy ! Component: 950 - total flux cleaned = -0.0111582 Jy ! Component: 1000 - total flux cleaned = -0.0110941 Jy ! Component: 1050 - total flux cleaned = -0.0110955 Jy ! Component: 1100 - total flux cleaned = -0.0111575 Jy ! Component: 1150 - total flux cleaned = -0.0110356 Jy ! Component: 1200 - total flux cleaned = -0.0110363 Jy ! Component: 1250 - total flux cleaned = -0.011153 Jy ! Component: 1300 - total flux cleaned = -0.0111532 Jy ! Component: 1350 - total flux cleaned = -0.0112092 Jy ! Component: 1400 - total flux cleaned = -0.0113191 Jy ! Component: 1450 - total flux cleaned = -0.0112642 Jy ! Component: 1500 - total flux cleaned = -0.0111573 Jy ! Component: 1550 - total flux cleaned = -0.0111573 Jy ! Component: 1600 - total flux cleaned = -0.0111566 Jy ! Component: 1650 - total flux cleaned = -0.0110025 Jy ! Component: 1700 - total flux cleaned = -0.0108515 Jy ! Component: 1750 - total flux cleaned = -0.0108512 Jy ! Component: 1800 - total flux cleaned = -0.0106537 Jy ! Component: 1850 - total flux cleaned = -0.0105083 Jy ! Component: 1900 - total flux cleaned = -0.0104127 Jy ! Component: 1950 - total flux cleaned = -0.0104132 Jy ! Component: 2000 - total flux cleaned = -0.0103192 Jy ! Component: 2050 - total flux cleaned = -0.0104123 Jy ! Component: 2100 - total flux cleaned = -0.0105974 Jy ! Component: 2150 - total flux cleaned = -0.0105515 Jy ! Component: 2200 - total flux cleaned = -0.0107346 Jy ! Component: 2250 - total flux cleaned = -0.0109165 Jy ! Component: 2300 - total flux cleaned = -0.0109165 Jy ! Component: 2350 - total flux cleaned = -0.0110519 Jy ! Component: 2400 - total flux cleaned = -0.0110517 Jy ! Component: 2450 - total flux cleaned = -0.0111411 Jy ! Component: 2500 - total flux cleaned = -0.0113194 Jy ! Component: 2550 - total flux cleaned = -0.0113637 Jy ! Component: 2600 - total flux cleaned = -0.0114528 Jy ! Component: 2650 - total flux cleaned = -0.0115859 Jy ! Component: 2700 - total flux cleaned = -0.0117625 Jy ! Component: 2750 - total flux cleaned = -0.0119828 Jy ! Component: 2800 - total flux cleaned = -0.0122037 Jy ! Component: 2850 - total flux cleaned = -0.0124687 Jy ! Component: 2900 - total flux cleaned = -0.01269 Jy ! Component: 2950 - total flux cleaned = -0.0129116 Jy ! Component: 3000 - total flux cleaned = -0.0131342 Jy ! Component: 3050 - total flux cleaned = -0.0134017 Jy ! Component: 3100 - total flux cleaned = -0.0134463 Jy ! Component: 3150 - total flux cleaned = -0.0136254 Jy ! Component: 3200 - total flux cleaned = -0.0137157 Jy ! Component: 3250 - total flux cleaned = -0.0138967 Jy ! Component: 3300 - total flux cleaned = -0.0139419 Jy ! Component: 3350 - total flux cleaned = -0.014033 Jy ! Component: 3400 - total flux cleaned = -0.0141246 Jy ! Component: 3450 - total flux cleaned = -0.014263 Jy ! Component: 3500 - total flux cleaned = -0.0143096 Jy ! Component: 3550 - total flux cleaned = -0.0144501 Jy ! Component: 3600 - total flux cleaned = -0.0145442 Jy ! Component: 3650 - total flux cleaned = -0.0147335 Jy ! Component: 3700 - total flux cleaned = -0.0148768 Jy ! Component: 3750 - total flux cleaned = -0.0150213 Jy ! Component: 3800 - total flux cleaned = -0.0151664 Jy ! Component: 3850 - total flux cleaned = -0.0153127 Jy ! Component: 3900 - total flux cleaned = -0.0154603 Jy ! Component: 3950 - total flux cleaned = -0.0156585 Jy ! Component: 4000 - total flux cleaned = -0.0159088 Jy ! Component: 4050 - total flux cleaned = -0.0160609 Jy ! Total flux subtracted in 4096 components = -0.0162133 Jy ! Clean residual min=-0.003288 max=0.002922 Jy/beam ! Clean residual mean=0.000000 rms=0.000885 Jy/beam ! Combined flux in latest and established models = 0.553585 Jy keep ! Adding 209 model components to the UV plane model. ! The established model now contains 301 components and 0.553585 Jy ![Exited script file: muppet] wmap "J2359-3133_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.091 x 7.976 at 11.29 degrees (North through East) ! Clean map min=-0.0063445 max=0.32029 Jy/beam ! Writing clean map to FITS file: J2359-3133_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.320288 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000966789 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.90555 0.90555 1.8111 3.6222 7.2444 14.4888 28.9776 57.9552 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.32 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.091 x 7.976 at 11.29 degrees (North through East) ! Clean map min=-0.0063445 max=0.32029 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2359-3133_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:29:49 2019