! Started logfile: J2359-3133_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:58:24 2019 obs J2359-3133_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J2359-3133_S_2017_05_31_pus_uva.fits ! AN table 1: 20 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.884444 visibilities/baseline/integration-bin. ! Found source: J2359-3133 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 3184 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2359-3133_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.588403Jy sigma=0.003889 ! Fit after self-cal, rms=0.570520Jy sigma=0.003764 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.473 mas, bmaj=7.041 mas, bpa=-5.049 degrees ! Estimated noise=2865.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.385363 Jy ! Component: 100 - total flux cleaned = 0.470032 Jy ! Total flux subtracted in 100 components = 0.470032 Jy ! Clean residual min=-0.044639 max=0.081252 Jy/beam ! Clean residual mean=-0.000328 rms=0.013914 Jy/beam ! Combined flux in latest and established models = 0.470032 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.470032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.307699Jy sigma=0.001628 ! Fit after self-cal, rms=0.307652Jy sigma=0.001628 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.92 mas, bmaj=8.105 mas, bpa=-5.215 degrees ! Estimated noise=2300.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0202899 Jy ! Component: 100 - total flux cleaned = 0.0214832 Jy ! Component: 150 - total flux cleaned = 0.0230502 Jy ! Component: 200 - total flux cleaned = 0.0244147 Jy ! Total flux subtracted in 200 components = 0.0244147 Jy ! Clean residual min=-0.041608 max=0.070230 Jy/beam ! Clean residual mean=-0.000231 rms=0.016224 Jy/beam ! Combined flux in latest and established models = 0.494447 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.494447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.303209Jy sigma=0.001614 ! Fit after self-cal, rms=0.303214Jy sigma=0.001614 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.45 FD 0.82 HN 1.43 KP 0.89 ! LA 0.85 MK 0.95 NL 0.99 OV 0.89 ! PT 1.74 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.83 HN 1.60 KP 0.85 ! LA 0.86 MK 0.97 NL 1.10 OV 0.92 ! PT 1.72 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.86 HN 1.55 KP 0.87 ! LA 0.86 MK 1.02 NL 1.06 OV 0.85 ! PT 1.64 SC 1.00 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 1.48 KP 0.95 ! LA 0.88 MK 1.01 NL 1.00* OV 1.00* ! PT 1.67 SC 1.00* ! ! ! Fit before self-cal, rms=0.303214Jy sigma=0.001614 ! Fit after self-cal, rms=0.259505Jy sigma=0.001267 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.936 mas, bmaj=7.972 mas, bpa=-4.533 degrees ! Estimated noise=2282.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0017743 Jy ! Component: 100 - total flux cleaned = -0.00176476 Jy ! Component: 150 - total flux cleaned = -0.00158687 Jy ! Component: 200 - total flux cleaned = -0.00142149 Jy ! Total flux subtracted in 200 components = -0.00142149 Jy ! Clean residual min=-0.039383 max=0.047898 Jy/beam ! Clean residual mean=-0.000808 rms=0.010926 Jy/beam ! Combined flux in latest and established models = 0.493026 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 19 components and 0.493026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.259058Jy sigma=0.001266 ! Fit after self-cal, rms=0.259854Jy sigma=0.001265 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.259854Jy sigma=0.001265 ! Fit after self-cal, rms=0.883442Jy sigma=0.001450 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.83 mas, bmaj=7.745 mas, bpa=-4.47 degrees ! Estimated noise=2639.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0661176 Jy ! Component: 100 - total flux cleaned = 0.096325 Jy ! Component: 150 - total flux cleaned = 0.112432 Jy ! Component: 200 - total flux cleaned = 0.121359 Jy ! Total flux subtracted in 200 components = 0.121359 Jy ! Clean residual min=-0.078514 max=0.046615 Jy/beam ! Clean residual mean=-0.001784 rms=0.018466 Jy/beam ! Combined flux in latest and established models = 0.614384 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 31 components and 0.614384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.860025Jy sigma=0.001503 ! Fit after self-cal, rms=0.860901Jy sigma=0.001502 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00508644 Jy ! Component: 100 - total flux cleaned = 0.00577669 Jy ! Component: 150 - total flux cleaned = 0.00614691 Jy ! Component: 200 - total flux cleaned = 0.00649651 Jy ! Total flux subtracted in 200 components = 0.00649651 Jy ! Clean residual min=-0.079106 max=0.045914 Jy/beam ! Clean residual mean=-0.001781 rms=0.018574 Jy/beam ! Combined flux in latest and established models = 0.620881 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.620881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.859919Jy sigma=0.001510 ! Fit after self-cal, rms=0.859927Jy sigma=0.001510 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.859927Jy sigma=0.001510 ! Fit after self-cal, rms=0.605791Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.823 mas, bmaj=7.753 mas, bpa=-4.607 degrees ! Estimated noise=2652.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00129532 Jy ! Component: 100 - total flux cleaned = -0.00143516 Jy ! Component: 150 - total flux cleaned = -0.00143652 Jy ! Component: 200 - total flux cleaned = -0.00156328 Jy ! Total flux subtracted in 200 components = -0.00156328 Jy ! Clean residual min=-0.009476 max=0.007822 Jy/beam ! Clean residual mean=-0.000022 rms=0.001831 Jy/beam ! Combined flux in latest and established models = 0.619318 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 41 components and 0.619318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.605726Jy sigma=0.000655 ! Fit after self-cal, rms=0.606380Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000406071 Jy ! Component: 100 - total flux cleaned = -0.000407984 Jy ! Component: 150 - total flux cleaned = -0.000513897 Jy ! Component: 200 - total flux cleaned = -0.000612948 Jy ! Total flux subtracted in 200 components = -0.000612948 Jy ! Clean residual min=-0.009146 max=0.007673 Jy/beam ! Clean residual mean=-0.000026 rms=0.001802 Jy/beam ! Combined flux in latest and established models = 0.618705 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.618705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.606341Jy sigma=0.000651 ! Fit after self-cal, rms=0.606353Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.606353Jy sigma=0.000651 ! Fit after self-cal, rms=0.605901Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.999 mas, bmaj=21.94 mas, bpa=0.972 degrees ! Estimated noise=3574.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00182171 Jy ! Component: 100 - total flux cleaned = -0.00183283 Jy ! Component: 150 - total flux cleaned = -0.0018697 Jy ! Component: 200 - total flux cleaned = -0.00187189 Jy ! Total flux subtracted in 200 components = -0.00187189 Jy ! Clean residual min=-0.006228 max=0.006808 Jy/beam ! Clean residual mean=-0.000045 rms=0.001986 Jy/beam ! Combined flux in latest and established models = 0.616833 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 52 components and 0.616833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.605913Jy sigma=0.000651 ! Fit after self-cal, rms=0.605903Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.88455e-05 Jy ! Component: 100 - total flux cleaned = -7.43638e-05 Jy ! Component: 150 - total flux cleaned = -0.000109841 Jy ! Component: 200 - total flux cleaned = -0.000111668 Jy ! Total flux subtracted in 200 components = -0.000111668 Jy ! Clean residual min=-0.006211 max=0.006843 Jy/beam ! Clean residual mean=-0.000046 rms=0.001987 Jy/beam ! Combined flux in latest and established models = 0.616721 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 54 components and 0.616721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.605908Jy sigma=0.000651 ! Fit after self-cal, rms=0.605924Jy sigma=0.000651 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.824 mas, bmaj=7.754 mas, bpa=-4.615 degrees ! Estimated noise=2650.48 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.824 x 7.754 at -4.615 degrees (North through East) ! Clean map min=-0.00851 max=0.53806 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.605924Jy sigma=0.000651 ! Fit after self-cal, rms=1.065996Jy sigma=0.000608 ! Inverting map and beam ! Estimated beam: bmin=2.828 mas, bmaj=7.763 mas, bpa=-4.624 degrees ! Estimated noise=2651.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00137003 Jy ! Component: 100 - total flux cleaned = -0.00125967 Jy ! Component: 150 - total flux cleaned = -0.00136174 Jy ! Component: 200 - total flux cleaned = -0.00145702 Jy ! Total flux subtracted in 200 components = -0.00145702 Jy ! Clean residual min=-0.008717 max=0.007585 Jy/beam ! Clean residual mean=-0.000016 rms=0.001781 Jy/beam ! Combined flux in latest and established models = 0.615264 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 57 components and 0.615264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.065973Jy sigma=0.000607 ! Fit after self-cal, rms=1.066000Jy sigma=0.000607 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000118139 Jy ! Component: 100 - total flux cleaned = -0.000208364 Jy ! Component: 150 - total flux cleaned = -0.000372969 Jy ! Component: 200 - total flux cleaned = -0.000453093 Jy ! Total flux subtracted in 200 components = -0.000453093 Jy ! Clean residual min=-0.008506 max=0.007402 Jy/beam ! Clean residual mean=-0.000018 rms=0.001766 Jy/beam ! Combined flux in latest and established models = 0.614811 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 59 components and 0.614811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.065999Jy sigma=0.000606 ! Fit after self-cal, rms=1.065997Jy sigma=0.000606 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.065997Jy sigma=0.000606 ! Fit after self-cal, rms=1.064940Jy sigma=0.000606 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.448 mas, bmaj=6.866 mas, bpa=-4.384 degrees ! Estimated noise=3226.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.433327 Jy ! Component: 100 - total flux cleaned = 0.52916 Jy ! Component: 150 - total flux cleaned = 0.565502 Jy ! Component: 200 - total flux cleaned = 0.586576 Jy ! Total flux subtracted in 200 components = 0.586576 Jy ! Clean residual min=-0.011023 max=0.015346 Jy/beam ! Clean residual mean=-0.000079 rms=0.002643 Jy/beam ! Combined flux in latest and established models = 0.586577 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.586577 Jy ! Inverting map and beam ! Estimated beam: bmin=2.828 mas, bmaj=7.762 mas, bpa=-4.628 degrees ! Estimated noise=2648.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.5, -14). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0157531 Jy ! Component: 100 - total flux cleaned = 0.0239384 Jy ! Component: 150 - total flux cleaned = 0.0256497 Jy ! Component: 200 - total flux cleaned = 0.0263037 Jy ! Total flux subtracted in 200 components = 0.0263037 Jy ! Clean residual min=-0.008213 max=0.006318 Jy/beam ! Clean residual mean=-0.000020 rms=0.001736 Jy/beam ! Combined flux in latest and established models = 0.61288 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 30 components and 0.61288 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.011 mas, bmaj=22 mas, bpa=0.9263 degrees ! Estimated noise=3561.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000871126 Jy ! Component: 100 - total flux cleaned = 0.000636091 Jy ! Component: 150 - total flux cleaned = 0.000430181 Jy ! Component: 200 - total flux cleaned = 0.000239866 Jy ! Total flux subtracted in 200 components = 0.000239866 Jy ! Clean residual min=-0.006256 max=0.006617 Jy/beam ! Clean residual mean=-0.000039 rms=0.002016 Jy/beam ! Combined flux in latest and established models = 0.61312 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000176069 Jy ! Component: 100 - total flux cleaned = -0.000338244 Jy ! Component: 150 - total flux cleaned = -0.000439127 Jy ! Component: 200 - total flux cleaned = -0.000583758 Jy ! Total flux subtracted in 200 components = -0.000583758 Jy ! Clean residual min=-0.006228 max=0.006581 Jy/beam ! Clean residual mean=-0.000042 rms=0.001992 Jy/beam ! Combined flux in latest and established models = 0.612536 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 46 components and 0.612536 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.828 mas, bmaj=7.762 mas, bpa=-4.628 degrees ! Estimated noise=2648.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000519888 Jy ! Component: 100 - total flux cleaned = -0.000751107 Jy ! Component: 150 - total flux cleaned = -0.000854616 Jy ! Component: 200 - total flux cleaned = -0.000854122 Jy ! Total flux subtracted in 200 components = -0.000854122 Jy ! Clean residual min=-0.007689 max=0.006241 Jy/beam ! Clean residual mean=-0.000022 rms=0.001678 Jy/beam ! Combined flux in latest and established models = 0.611682 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 64 components and 0.611682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.065128Jy sigma=0.000603 ! Fit after self-cal, rms=1.064931Jy sigma=0.000603 wmodel J2359-3133_S_2017_05_31_pus_map.mod ! Writing 64 model components to file: J2359-3133_S_2017_05_31_pus_map.mod wobs J2359-3133_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J2359-3133_S_2017_05_31_pus_uvs.fits wwins J2359-3133_S_2017_05_31_pus_map.win ! wwins: Wrote 2 windows to J2359-3133_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0028068 Jy ! Component: 100 - total flux cleaned = -0.00337701 Jy ! Component: 150 - total flux cleaned = -0.00369954 Jy ! Component: 200 - total flux cleaned = -0.00380214 Jy ! Component: 250 - total flux cleaned = -0.00380274 Jy ! Component: 300 - total flux cleaned = -0.00390015 Jy ! Component: 350 - total flux cleaned = -0.00390229 Jy ! Component: 400 - total flux cleaned = -0.00380984 Jy ! Component: 450 - total flux cleaned = -0.00353855 Jy ! Component: 500 - total flux cleaned = -0.00344941 Jy ! Component: 550 - total flux cleaned = -0.00336336 Jy ! Component: 600 - total flux cleaned = -0.00302217 Jy ! Component: 650 - total flux cleaned = -0.00260376 Jy ! Component: 700 - total flux cleaned = -0.00227335 Jy ! Component: 750 - total flux cleaned = -0.00219125 Jy ! Component: 800 - total flux cleaned = -0.00170999 Jy ! Component: 850 - total flux cleaned = -0.00155305 Jy ! Component: 900 - total flux cleaned = -0.00131917 Jy ! Component: 950 - total flux cleaned = -0.00101131 Jy ! Component: 1000 - total flux cleaned = -0.000481239 Jy ! Component: 1050 - total flux cleaned = -0.000333622 Jy ! Component: 1100 - total flux cleaned = -0.000185314 Jy ! Component: 1150 - total flux cleaned = 0.000326029 Jy ! Component: 1200 - total flux cleaned = 0.000542997 Jy ! Component: 1250 - total flux cleaned = 0.00104119 Jy ! Component: 1300 - total flux cleaned = 0.00111265 Jy ! Component: 1350 - total flux cleaned = 0.00159981 Jy ! Component: 1400 - total flux cleaned = 0.00173715 Jy ! Component: 1450 - total flux cleaned = 0.00207758 Jy ! Component: 1500 - total flux cleaned = 0.0020779 Jy ! Component: 1550 - total flux cleaned = 0.0023449 Jy ! Component: 1600 - total flux cleaned = 0.00241107 Jy ! Component: 1650 - total flux cleaned = 0.00260811 Jy ! Component: 1700 - total flux cleaned = 0.00286796 Jy ! Component: 1750 - total flux cleaned = 0.00306048 Jy ! Component: 1800 - total flux cleaned = 0.00318819 Jy ! Component: 1850 - total flux cleaned = 0.00337758 Jy ! Component: 1900 - total flux cleaned = 0.00381492 Jy ! Component: 1950 - total flux cleaned = 0.00400088 Jy ! Component: 2000 - total flux cleaned = 0.00424613 Jy ! Component: 2050 - total flux cleaned = 0.00424618 Jy ! Component: 2100 - total flux cleaned = 0.00454796 Jy ! Component: 2150 - total flux cleaned = 0.00454808 Jy ! Component: 2200 - total flux cleaned = 0.00466747 Jy ! Component: 2250 - total flux cleaned = 0.00466709 Jy ! Component: 2300 - total flux cleaned = 0.00478483 Jy ! Component: 2350 - total flux cleaned = 0.00490131 Jy ! Component: 2400 - total flux cleaned = 0.00472771 Jy ! Component: 2450 - total flux cleaned = 0.00478501 Jy ! Component: 2500 - total flux cleaned = 0.00495664 Jy ! Component: 2550 - total flux cleaned = 0.0048995 Jy ! Component: 2600 - total flux cleaned = 0.00473008 Jy ! Component: 2650 - total flux cleaned = 0.00478627 Jy ! Component: 2700 - total flux cleaned = 0.00456382 Jy ! Component: 2750 - total flux cleaned = 0.0047854 Jy ! Component: 2800 - total flux cleaned = 0.00467569 Jy ! Component: 2850 - total flux cleaned = 0.00440243 Jy ! Component: 2900 - total flux cleaned = 0.00456546 Jy ! Component: 2950 - total flux cleaned = 0.00445721 Jy ! Component: 3000 - total flux cleaned = 0.00424232 Jy ! Component: 3050 - total flux cleaned = 0.00418877 Jy ! Component: 3100 - total flux cleaned = 0.00408211 Jy ! Component: 3150 - total flux cleaned = 0.00413446 Jy ! Component: 3200 - total flux cleaned = 0.00397617 Jy ! Component: 3250 - total flux cleaned = 0.00381828 Jy ! Component: 3300 - total flux cleaned = 0.00371394 Jy ! Component: 3350 - total flux cleaned = 0.0035582 Jy ! Component: 3400 - total flux cleaned = 0.00355797 Jy ! Component: 3450 - total flux cleaned = 0.00319776 Jy ! Component: 3500 - total flux cleaned = 0.00314669 Jy ! Component: 3550 - total flux cleaned = 0.00309551 Jy ! Component: 3600 - total flux cleaned = 0.00299371 Jy ! Component: 3650 - total flux cleaned = 0.00264051 Jy ! Component: 3700 - total flux cleaned = 0.00264065 Jy ! Component: 3750 - total flux cleaned = 0.00239077 Jy ! Component: 3800 - total flux cleaned = 0.0022414 Jy ! Component: 3850 - total flux cleaned = 0.002093 Jy ! Component: 3900 - total flux cleaned = 0.00204366 Jy ! Component: 3950 - total flux cleaned = 0.00184674 Jy ! Component: 4000 - total flux cleaned = 0.00160221 Jy ! Component: 4050 - total flux cleaned = 0.00135888 Jy ! Total flux subtracted in 4096 components = 0.00126217 Jy ! Clean residual min=-0.003455 max=0.002814 Jy/beam ! Clean residual mean=-0.000018 rms=0.000885 Jy/beam ! Combined flux in latest and established models = 0.612944 Jy keep ! Adding 295 model components to the UV plane model. ! The established model now contains 359 components and 0.612944 Jy ![Exited script file: muppet] wmap "J2359-3133_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.828 x 7.762 at -4.628 degrees (North through East) ! Clean map min=-0.0054041 max=0.54822 Jy/beam ! Writing clean map to FITS file: J2359-3133_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.548219 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000873471 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.477986 0.477986 0.955973 1.91195 3.82389 7.64778 15.2956 30.5911 61.1823 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0026 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.548 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.828 x 7.762 at -4.628 degrees (North through East) ! Clean map min=-0.0054041 max=0.54822 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2359-3133_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:58:28 2019