! Started logfile: J2359-3133_S_2017_05_01_pus_uvs.log on Wed May 1 18:46:14 2019 obs J2359-3133_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J2359-3133_S_2017_05_01_pus_uva.fits ! AN table 1: 52 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.702564 visibilities/baseline/integration-bin. ! Found source: J2359-3133 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 6576 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2359-3133_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 92 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 268 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.412667Jy sigma=0.002098 ! Fit after self-cal, rms=0.396315Jy sigma=0.002001 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.658 mas, bmaj=7.232 mas, bpa=-1.082 degrees ! Estimated noise=2371.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.488648 Jy ! Component: 100 - total flux cleaned = 0.59999 Jy ! Total flux subtracted in 100 components = 0.59999 Jy ! Clean residual min=-0.018605 max=0.050147 Jy/beam ! Clean residual mean=-0.000030 rms=0.005525 Jy/beam ! Combined flux in latest and established models = 0.59999 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.59999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176753Jy sigma=0.000913 ! Fit after self-cal, rms=0.176781Jy sigma=0.000913 ! Inverting map ! Added new window around map position (4, -6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.051234 Jy ! Component: 100 - total flux cleaned = 0.0808245 Jy ! Total flux subtracted in 100 components = 0.0808245 Jy ! Clean residual min=-0.017318 max=0.035846 Jy/beam ! Clean residual mean=-0.000025 rms=0.004070 Jy/beam ! Combined flux in latest and established models = 0.680815 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 22 components and 0.680815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157685Jy sigma=0.000775 ! Fit after self-cal, rms=0.157300Jy sigma=0.000771 ! Inverting map ! Added new window around map position (-4.5, 7.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0281257 Jy ! Component: 100 - total flux cleaned = 0.0452164 Jy ! Total flux subtracted in 100 components = 0.0452164 Jy ! Clean residual min=-0.016441 max=0.017033 Jy/beam ! Clean residual mean=-0.000017 rms=0.003518 Jy/beam ! Combined flux in latest and established models = 0.726031 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 36 components and 0.726031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151804Jy sigma=0.000739 ! Fit after self-cal, rms=0.151757Jy sigma=0.000738 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.268 mas, bmaj=8.471 mas, bpa=0.2128 degrees ! Estimated noise=1773.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.5, -11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.017091 Jy ! Component: 100 - total flux cleaned = 0.0198867 Jy ! Component: 150 - total flux cleaned = 0.0206369 Jy ! Component: 200 - total flux cleaned = 0.0209441 Jy ! Total flux subtracted in 200 components = 0.0209441 Jy ! Clean residual min=-0.014861 max=0.012619 Jy/beam ! Clean residual mean=-0.000028 rms=0.002784 Jy/beam ! Combined flux in latest and established models = 0.746975 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 63 components and 0.746975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148546Jy sigma=0.000723 ! Fit after self-cal, rms=0.148404Jy sigma=0.000722 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.92 HN 1.10 KP 1.02 ! LA 1.01 MK 0.96 NL 0.96 OV 1.00 ! PT 1.03 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.97 HN 1.15 KP 0.99 ! LA 0.96 MK 0.99 NL 1.02 OV 1.04 ! PT 1.01 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.01 HN 1.16 KP 1.00 ! LA 1.00 MK 1.03 NL 1.01 OV 0.94 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.05 HN 1.08 KP 1.00* ! LA 0.93 MK 1.00 NL 1.00* OV 1.00* ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.148404Jy sigma=0.000722 ! Fit after self-cal, rms=0.142955Jy sigma=0.000687 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.279 mas, bmaj=8.444 mas, bpa=0.4809 degrees ! Estimated noise=1768.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00417318 Jy ! Component: 100 - total flux cleaned = -0.00539126 Jy ! Component: 150 - total flux cleaned = -0.00580093 Jy ! Component: 200 - total flux cleaned = -0.00598111 Jy ! Total flux subtracted in 200 components = -0.00598111 Jy ! Clean residual min=-0.011417 max=0.009225 Jy/beam ! Clean residual mean=-0.000034 rms=0.002181 Jy/beam ! Combined flux in latest and established models = 0.740994 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 79 components and 0.740994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142028Jy sigma=0.000683 ! Fit after self-cal, rms=0.142007Jy sigma=0.000683 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142007Jy sigma=0.000683 ! Fit after self-cal, rms=0.142603Jy sigma=0.000665 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.295 mas, bmaj=8.435 mas, bpa=0.3826 degrees ! Estimated noise=1771.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00507975 Jy ! Component: 100 - total flux cleaned = -0.00551483 Jy ! Component: 150 - total flux cleaned = -0.00587539 Jy ! Component: 200 - total flux cleaned = -0.00603962 Jy ! Total flux subtracted in 200 components = -0.00603962 Jy ! Clean residual min=-0.006778 max=0.006441 Jy/beam ! Clean residual mean=-0.000040 rms=0.001598 Jy/beam ! Combined flux in latest and established models = 0.734955 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 104 components and 0.734955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141960Jy sigma=0.000662 ! Fit after self-cal, rms=0.141985Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000831515 Jy ! Component: 100 - total flux cleaned = -0.000696077 Jy ! Component: 150 - total flux cleaned = -0.000697146 Jy ! Component: 200 - total flux cleaned = -0.000583888 Jy ! Total flux subtracted in 200 components = -0.000583888 Jy ! Clean residual min=-0.006649 max=0.006182 Jy/beam ! Clean residual mean=-0.000041 rms=0.001552 Jy/beam ! Combined flux in latest and established models = 0.734371 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 113 components and 0.734371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141762Jy sigma=0.000660 ! Fit after self-cal, rms=0.141744Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141744Jy sigma=0.000660 ! Fit after self-cal, rms=0.142145Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.305 mas, bmaj=8.436 mas, bpa=0.4335 degrees ! Estimated noise=1770.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00402304 Jy ! Component: 100 - total flux cleaned = -0.00472893 Jy ! Component: 150 - total flux cleaned = -0.00501885 Jy ! Component: 200 - total flux cleaned = -0.00510611 Jy ! Total flux subtracted in 200 components = -0.00510611 Jy ! Clean residual min=-0.005971 max=0.005186 Jy/beam ! Clean residual mean=-0.000052 rms=0.001322 Jy/beam ! Combined flux in latest and established models = 0.729265 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 135 components and 0.729265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141932Jy sigma=0.000651 ! Fit after self-cal, rms=0.141948Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000217142 Jy ! Component: 100 - total flux cleaned = -6.17306e-05 Jy ! Component: 150 - total flux cleaned = 7.34978e-06 Jy ! Component: 200 - total flux cleaned = -5.8731e-05 Jy ! Total flux subtracted in 200 components = -5.8731e-05 Jy ! Clean residual min=-0.005885 max=0.005037 Jy/beam ! Clean residual mean=-0.000052 rms=0.001304 Jy/beam ! Combined flux in latest and established models = 0.729206 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 145 components and 0.729206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141878Jy sigma=0.000650 ! Fit after self-cal, rms=0.141871Jy sigma=0.000650 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141871Jy sigma=0.000650 ! Fit after self-cal, rms=0.142544Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.317 mas, bmaj=21.63 mas, bpa=3.181 degrees ! Estimated noise=2098.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00286612 Jy ! Component: 100 - total flux cleaned = -0.00311847 Jy ! Component: 150 - total flux cleaned = -0.00321598 Jy ! Component: 200 - total flux cleaned = -0.00325768 Jy ! Total flux subtracted in 200 components = -0.00325768 Jy ! Clean residual min=-0.005066 max=0.004589 Jy/beam ! Clean residual mean=-0.000099 rms=0.001534 Jy/beam ! Combined flux in latest and established models = 0.725948 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 162 components and 0.725949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142514Jy sigma=0.000650 ! Fit after self-cal, rms=0.142519Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.19407e-05 Jy ! Component: 100 - total flux cleaned = -2.87162e-06 Jy ! Component: 150 - total flux cleaned = 3.29087e-05 Jy ! Component: 200 - total flux cleaned = 3.39952e-05 Jy ! Total flux subtracted in 200 components = 3.39952e-05 Jy ! Clean residual min=-0.005088 max=0.004507 Jy/beam ! Clean residual mean=-0.000098 rms=0.001521 Jy/beam ! Combined flux in latest and established models = 0.725982 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 170 components and 0.725982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142513Jy sigma=0.000650 ! Fit after self-cal, rms=0.142512Jy sigma=0.000650 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.309 mas, bmaj=8.44 mas, bpa=0.436 degrees ! Estimated noise=1769.12 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.309 x 8.44 at 0.436 degrees (North through East) ! Clean map min=-0.0057626 max=0.61535 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142512Jy sigma=0.000650 ! Fit after self-cal, rms=0.136500Jy sigma=0.000598 ! Inverting map and beam ! Estimated beam: bmin=3.311 mas, bmaj=8.445 mas, bpa=0.4477 degrees ! Estimated noise=1766.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00282909 Jy ! Component: 100 - total flux cleaned = -0.00329246 Jy ! Component: 150 - total flux cleaned = -0.00336123 Jy ! Component: 200 - total flux cleaned = -0.00342342 Jy ! Total flux subtracted in 200 components = -0.00342342 Jy ! Clean residual min=-0.005609 max=0.004854 Jy/beam ! Clean residual mean=-0.000051 rms=0.001223 Jy/beam ! Combined flux in latest and established models = 0.722559 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 181 components and 0.722559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136403Jy sigma=0.000597 ! Fit after self-cal, rms=0.136397Jy sigma=0.000597 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.95544e-05 Jy ! Component: 100 - total flux cleaned = -0.000209464 Jy ! Component: 150 - total flux cleaned = -0.000262358 Jy ! Component: 200 - total flux cleaned = -0.000311017 Jy ! Total flux subtracted in 200 components = -0.000311017 Jy ! Clean residual min=-0.005542 max=0.004773 Jy/beam ! Clean residual mean=-0.000052 rms=0.001216 Jy/beam ! Combined flux in latest and established models = 0.722248 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 186 components and 0.722248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136354Jy sigma=0.000597 ! Fit after self-cal, rms=0.136351Jy sigma=0.000597 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136351Jy sigma=0.000597 ! Fit after self-cal, rms=0.136863Jy sigma=0.000597 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.685 mas, bmaj=7.181 mas, bpa=-0.719 degrees ! Estimated noise=2398.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.494072 Jy ! Component: 100 - total flux cleaned = 0.603625 Jy ! Component: 150 - total flux cleaned = 0.642309 Jy ! Component: 200 - total flux cleaned = 0.665395 Jy ! Total flux subtracted in 200 components = 0.665395 Jy ! Clean residual min=-0.007529 max=0.012520 Jy/beam ! Clean residual mean=-0.000027 rms=0.002092 Jy/beam ! Combined flux in latest and established models = 0.665395 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.665395 Jy ! Inverting map and beam ! Estimated beam: bmin=3.314 mas, bmaj=8.446 mas, bpa=0.4589 degrees ! Estimated noise=1765.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0227437 Jy ! Component: 100 - total flux cleaned = 0.0355096 Jy ! Component: 150 - total flux cleaned = 0.0434569 Jy ! Component: 200 - total flux cleaned = 0.0486222 Jy ! Total flux subtracted in 200 components = 0.0486222 Jy ! Clean residual min=-0.005648 max=0.004790 Jy/beam ! Clean residual mean=-0.000060 rms=0.001297 Jy/beam ! Combined flux in latest and established models = 0.714017 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 67 components and 0.714017 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.337 mas, bmaj=21.68 mas, bpa=3.172 degrees ! Estimated noise=2090.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00418869 Jy ! Component: 100 - total flux cleaned = 0.00508855 Jy ! Component: 150 - total flux cleaned = 0.00532268 Jy ! Component: 200 - total flux cleaned = 0.00545443 Jy ! Total flux subtracted in 200 components = 0.00545443 Jy ! Clean residual min=-0.004979 max=0.004861 Jy/beam ! Clean residual mean=-0.000097 rms=0.001453 Jy/beam ! Combined flux in latest and established models = 0.719471 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.01914e-05 Jy ! Component: 100 - total flux cleaned = 0.000166337 Jy ! Component: 150 - total flux cleaned = 0.000213417 Jy ! Component: 200 - total flux cleaned = 0.00029758 Jy ! Total flux subtracted in 200 components = 0.00029758 Jy ! Clean residual min=-0.004883 max=0.004754 Jy/beam ! Clean residual mean=-0.000096 rms=0.001434 Jy/beam ! Combined flux in latest and established models = 0.719769 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 105 components and 0.719769 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.314 mas, bmaj=8.446 mas, bpa=0.4589 degrees ! Estimated noise=1765.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0012524 Jy ! Component: 100 - total flux cleaned = -0.00134258 Jy ! Component: 150 - total flux cleaned = -0.00142196 Jy ! Component: 200 - total flux cleaned = -0.0012722 Jy ! Total flux subtracted in 200 components = -0.0012722 Jy ! Clean residual min=-0.005417 max=0.004610 Jy/beam ! Clean residual mean=-0.000053 rms=0.001209 Jy/beam ! Combined flux in latest and established models = 0.718497 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 124 components and 0.718497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137235Jy sigma=0.000597 ! Fit after self-cal, rms=0.137132Jy sigma=0.000597 wmodel J2359-3133_S_2017_05_01_pus_map.mod ! Writing 124 model components to file: J2359-3133_S_2017_05_01_pus_map.mod wobs J2359-3133_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J2359-3133_S_2017_05_01_pus_uvs.fits wwins J2359-3133_S_2017_05_01_pus_map.win ! wwins: Wrote 4 windows to J2359-3133_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00246497 Jy ! Component: 100 - total flux cleaned = -0.00377847 Jy ! Component: 150 - total flux cleaned = -0.00451153 Jy ! Component: 200 - total flux cleaned = -0.00458829 Jy ! Component: 250 - total flux cleaned = -0.00495951 Jy ! Component: 300 - total flux cleaned = -0.00510345 Jy ! Component: 350 - total flux cleaned = -0.00531329 Jy ! Component: 400 - total flux cleaned = -0.00551921 Jy ! Component: 450 - total flux cleaned = -0.00578644 Jy ! Component: 500 - total flux cleaned = -0.00558953 Jy ! Component: 550 - total flux cleaned = -0.00552565 Jy ! Component: 600 - total flux cleaned = -0.00539929 Jy ! Component: 650 - total flux cleaned = -0.00527471 Jy ! Component: 700 - total flux cleaned = -0.00509098 Jy ! Component: 750 - total flux cleaned = -0.00502992 Jy ! Component: 800 - total flux cleaned = -0.00496871 Jy ! Component: 850 - total flux cleaned = -0.00479179 Jy ! Component: 900 - total flux cleaned = -0.00485047 Jy ! Component: 950 - total flux cleaned = -0.00473612 Jy ! Component: 1000 - total flux cleaned = -0.00484944 Jy ! Component: 1050 - total flux cleaned = -0.00468211 Jy ! Component: 1100 - total flux cleaned = -0.00457237 Jy ! Component: 1150 - total flux cleaned = -0.00462672 Jy ! Component: 1200 - total flux cleaned = -0.00462604 Jy ! Component: 1250 - total flux cleaned = -0.00457199 Jy ! Component: 1300 - total flux cleaned = -0.00457089 Jy ! Component: 1350 - total flux cleaned = -0.00436155 Jy ! Component: 1400 - total flux cleaned = -0.00420803 Jy ! Component: 1450 - total flux cleaned = -0.00415717 Jy ! Component: 1500 - total flux cleaned = -0.00415765 Jy ! Component: 1550 - total flux cleaned = -0.0041576 Jy ! Component: 1600 - total flux cleaned = -0.00420717 Jy ! Component: 1650 - total flux cleaned = -0.00410956 Jy ! Component: 1700 - total flux cleaned = -0.00415843 Jy ! Component: 1750 - total flux cleaned = -0.00435031 Jy ! Component: 1800 - total flux cleaned = -0.00420724 Jy ! Component: 1850 - total flux cleaned = -0.00425391 Jy ! Component: 1900 - total flux cleaned = -0.00420753 Jy ! Component: 1950 - total flux cleaned = -0.00411494 Jy ! Component: 2000 - total flux cleaned = -0.00425297 Jy ! Component: 2050 - total flux cleaned = -0.00416206 Jy ! Component: 2100 - total flux cleaned = -0.00420756 Jy ! Component: 2150 - total flux cleaned = -0.00416259 Jy ! Component: 2200 - total flux cleaned = -0.0042524 Jy ! Component: 2250 - total flux cleaned = -0.00447325 Jy ! Component: 2300 - total flux cleaned = -0.0046043 Jy ! Component: 2350 - total flux cleaned = -0.00473427 Jy ! Component: 2400 - total flux cleaned = -0.00473455 Jy ! Component: 2450 - total flux cleaned = -0.00473446 Jy ! Component: 2500 - total flux cleaned = -0.0049042 Jy ! Component: 2550 - total flux cleaned = -0.00494683 Jy ! Component: 2600 - total flux cleaned = -0.00515579 Jy ! Component: 2650 - total flux cleaned = -0.00528026 Jy ! Component: 2700 - total flux cleaned = -0.00548614 Jy ! Component: 2750 - total flux cleaned = -0.00544545 Jy ! Component: 2800 - total flux cleaned = -0.0056478 Jy ! Component: 2850 - total flux cleaned = -0.00576864 Jy ! Component: 2900 - total flux cleaned = -0.00580879 Jy ! Component: 2950 - total flux cleaned = -0.006047 Jy ! Component: 3000 - total flux cleaned = -0.00604734 Jy ! Component: 3050 - total flux cleaned = -0.00620421 Jy ! Component: 3100 - total flux cleaned = -0.00632083 Jy ! Component: 3150 - total flux cleaned = -0.006398 Jy ! Component: 3200 - total flux cleaned = -0.00655211 Jy ! Component: 3250 - total flux cleaned = -0.00659021 Jy ! Component: 3300 - total flux cleaned = -0.0067795 Jy ! Component: 3350 - total flux cleaned = -0.00685521 Jy ! Component: 3400 - total flux cleaned = -0.00707966 Jy ! Component: 3450 - total flux cleaned = -0.00719158 Jy ! Component: 3500 - total flux cleaned = -0.00719117 Jy ! Component: 3550 - total flux cleaned = -0.00741235 Jy ! Component: 3600 - total flux cleaned = -0.00741216 Jy ! Component: 3650 - total flux cleaned = -0.0075575 Jy ! Component: 3700 - total flux cleaned = -0.00788352 Jy ! Component: 3750 - total flux cleaned = -0.0079192 Jy ! Component: 3800 - total flux cleaned = -0.00802686 Jy ! Component: 3850 - total flux cleaned = -0.0081338 Jy ! Component: 3900 - total flux cleaned = -0.00827543 Jy ! Component: 3950 - total flux cleaned = -0.00838096 Jy ! Component: 4000 - total flux cleaned = -0.00855609 Jy ! Component: 4050 - total flux cleaned = -0.00862579 Jy ! Total flux subtracted in 4096 components = -0.00876463 Jy ! Clean residual min=-0.002537 max=0.002269 Jy/beam ! Clean residual mean=-0.000007 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.709732 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 413 components and 0.709732 Jy ![Exited script file: muppet] wmap "J2359-3133_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.314 x 8.446 at 0.4589 degrees (North through East) ! Clean map min=-0.0035559 max=0.62708 Jy/beam ! Writing clean map to FITS file: J2359-3133_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.627079 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000642541 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.307397 0.307397 0.614794 1.22959 2.45918 4.91835 9.83671 19.6734 39.3468 78.6937 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.627 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.314 x 8.446 at 0.4589 degrees (North through East) ! Clean map min=-0.0035559 max=0.62708 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2359-3133_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:46:18 2019