! Started logfile: J2359-3133_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:52:58 2019 obs J2359-3133_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J2359-3133_S_2017_03_27_pus_uva.fits ! AN table 1: 17 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.720261 visibilities/baseline/integration-bin. ! Found source: J2359-3133 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 2204 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2359-3133_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.445361Jy sigma=0.002579 ! Fit after self-cal, rms=0.437586Jy sigma=0.002533 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.574 mas, bmaj=8.262 mas, bpa=-3.742 degrees ! Estimated noise=3523.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.447725 Jy ! Component: 100 - total flux cleaned = 0.54704 Jy ! Total flux subtracted in 100 components = 0.54704 Jy ! Clean residual min=-0.017415 max=0.045426 Jy/beam ! Clean residual mean=-0.000016 rms=0.006111 Jy/beam ! Combined flux in latest and established models = 0.54704 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.54704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161076Jy sigma=0.000859 ! Fit after self-cal, rms=0.161081Jy sigma=0.000859 ! Inverting map ! Added new window around map position (3.5, 7.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0435802 Jy ! Component: 100 - total flux cleaned = 0.0679489 Jy ! Total flux subtracted in 100 components = 0.0679489 Jy ! Clean residual min=-0.015363 max=0.030807 Jy/beam ! Clean residual mean=-0.000037 rms=0.004284 Jy/beam ! Combined flux in latest and established models = 0.614988 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 19 components and 0.614989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146138Jy sigma=0.000749 ! Fit after self-cal, rms=0.145431Jy sigma=0.000743 ! Inverting map ! Added new window around map position (33, -81). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0240369 Jy ! Component: 100 - total flux cleaned = 0.035598 Jy ! Total flux subtracted in 100 components = 0.035598 Jy ! Clean residual min=-0.012987 max=0.020188 Jy/beam ! Clean residual mean=-0.000043 rms=0.003442 Jy/beam ! Combined flux in latest and established models = 0.650587 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 32 components and 0.650587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141761Jy sigma=0.000721 ! Fit after self-cal, rms=0.141608Jy sigma=0.000718 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.126 mas, bmaj=9.326 mas, bpa=-4.589 degrees ! Estimated noise=2840.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105724 Jy ! Component: 100 - total flux cleaned = 0.0140704 Jy ! Component: 150 - total flux cleaned = 0.0154142 Jy ! Component: 200 - total flux cleaned = 0.0162268 Jy ! Total flux subtracted in 200 components = 0.0162268 Jy ! Clean residual min=-0.012266 max=0.012742 Jy/beam ! Clean residual mean=-0.000087 rms=0.002984 Jy/beam ! Combined flux in latest and established models = 0.666813 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 46 components and 0.666814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140573Jy sigma=0.000712 ! Fit after self-cal, rms=0.140591Jy sigma=0.000712 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 1.14 KP 1.06 ! LA 0.99 MK 0.97 NL 1.00* OV 1.03 ! PT 1.00 SC 0.92 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 1.16 KP 0.97 ! LA 0.96 MK 1.00 NL 1.07 OV 1.05 ! PT 0.97 SC 1.03 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.05 HN 1.22 KP 0.99 ! LA 0.97 MK 1.03 NL 1.01 OV 0.95 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.06 HN 1.12 KP 1.00* ! LA 1.00* MK 1.00 NL 1.00* OV 1.02 ! PT 0.98 SC 1.10 ! ! ! Fit before self-cal, rms=0.140591Jy sigma=0.000712 ! Fit after self-cal, rms=0.139351Jy sigma=0.000674 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.136 mas, bmaj=9.297 mas, bpa=-4.527 degrees ! Estimated noise=2860.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00563736 Jy ! Component: 100 - total flux cleaned = -0.00633375 Jy ! Component: 150 - total flux cleaned = -0.00648329 Jy ! Component: 200 - total flux cleaned = -0.00648119 Jy ! Total flux subtracted in 200 components = -0.00648119 Jy ! Clean residual min=-0.008927 max=0.008062 Jy/beam ! Clean residual mean=-0.000024 rms=0.002260 Jy/beam ! Combined flux in latest and established models = 0.660332 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 62 components and 0.660332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138832Jy sigma=0.000671 ! Fit after self-cal, rms=0.138790Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138790Jy sigma=0.000670 ! Fit after self-cal, rms=0.137150Jy sigma=0.000662 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.141 mas, bmaj=9.294 mas, bpa=-4.477 degrees ! Estimated noise=2855.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00315016 Jy ! Component: 100 - total flux cleaned = -0.00341227 Jy ! Component: 150 - total flux cleaned = -0.00362674 Jy ! Component: 200 - total flux cleaned = -0.0038083 Jy ! Total flux subtracted in 200 components = -0.0038083 Jy ! Clean residual min=-0.008247 max=0.007500 Jy/beam ! Clean residual mean=-0.000033 rms=0.001896 Jy/beam ! Combined flux in latest and established models = 0.656524 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 75 components and 0.656524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136889Jy sigma=0.000661 ! Fit after self-cal, rms=0.136822Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000671139 Jy ! Component: 100 - total flux cleaned = -0.000941933 Jy ! Component: 150 - total flux cleaned = -0.00102445 Jy ! Component: 200 - total flux cleaned = -0.00109588 Jy ! Total flux subtracted in 200 components = -0.00109588 Jy ! Clean residual min=-0.008200 max=0.007081 Jy/beam ! Clean residual mean=-0.000034 rms=0.001864 Jy/beam ! Combined flux in latest and established models = 0.655428 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 78 components and 0.655428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136702Jy sigma=0.000660 ! Fit after self-cal, rms=0.136683Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136683Jy sigma=0.000660 ! Fit after self-cal, rms=0.137004Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.142 mas, bmaj=9.289 mas, bpa=-4.434 degrees ! Estimated noise=2851.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00223314 Jy ! Component: 100 - total flux cleaned = -0.00231344 Jy ! Component: 150 - total flux cleaned = -0.00245773 Jy ! Component: 200 - total flux cleaned = -0.0025245 Jy ! Total flux subtracted in 200 components = -0.0025245 Jy ! Clean residual min=-0.008035 max=0.006828 Jy/beam ! Clean residual mean=-0.000037 rms=0.001803 Jy/beam ! Combined flux in latest and established models = 0.652904 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 80 components and 0.652904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136871Jy sigma=0.000659 ! Fit after self-cal, rms=0.136847Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00055144 Jy ! Component: 100 - total flux cleaned = -0.000737052 Jy ! Component: 150 - total flux cleaned = -0.000793696 Jy ! Component: 200 - total flux cleaned = -0.000842816 Jy ! Total flux subtracted in 200 components = -0.000842816 Jy ! Clean residual min=-0.007972 max=0.006912 Jy/beam ! Clean residual mean=-0.000037 rms=0.001787 Jy/beam ! Combined flux in latest and established models = 0.652061 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 82 components and 0.652061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136788Jy sigma=0.000658 ! Fit after self-cal, rms=0.136779Jy sigma=0.000658 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136779Jy sigma=0.000658 ! Fit after self-cal, rms=0.137302Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.586 mas, bmaj=23.33 mas, bpa=6.85 degrees ! Estimated noise=3516.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00100597 Jy ! Component: 100 - total flux cleaned = -0.000856598 Jy ! Component: 150 - total flux cleaned = -0.000669113 Jy ! Component: 200 - total flux cleaned = -0.000619695 Jy ! Total flux subtracted in 200 components = -0.000619695 Jy ! Clean residual min=-0.007026 max=0.006454 Jy/beam ! Clean residual mean=-0.000063 rms=0.002089 Jy/beam ! Combined flux in latest and established models = 0.651441 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 84 components and 0.651441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137309Jy sigma=0.000658 ! Fit after self-cal, rms=0.137286Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000423495 Jy ! Component: 100 - total flux cleaned = -0.000328169 Jy ! Component: 150 - total flux cleaned = -0.000289563 Jy ! Component: 200 - total flux cleaned = -0.000255542 Jy ! Total flux subtracted in 200 components = -0.000255542 Jy ! Clean residual min=-0.006839 max=0.006526 Jy/beam ! Clean residual mean=-0.000063 rms=0.002064 Jy/beam ! Combined flux in latest and established models = 0.651186 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 89 components and 0.651186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137304Jy sigma=0.000658 ! Fit after self-cal, rms=0.137292Jy sigma=0.000658 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.143 mas, bmaj=9.284 mas, bpa=-4.401 degrees ! Estimated noise=2848.6 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.143 x 9.284 at -4.401 degrees (North through East) ! Clean map min=-0.0079489 max=0.56601 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137292Jy sigma=0.000658 ! Fit after self-cal, rms=0.135114Jy sigma=0.000611 ! Inverting map and beam ! Estimated beam: bmin=3.141 mas, bmaj=9.269 mas, bpa=-4.369 degrees ! Estimated noise=2846.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00137671 Jy ! Component: 100 - total flux cleaned = -0.00144807 Jy ! Component: 150 - total flux cleaned = -0.001449 Jy ! Component: 200 - total flux cleaned = -0.00144922 Jy ! Total flux subtracted in 200 components = -0.00144922 Jy ! Clean residual min=-0.007792 max=0.006551 Jy/beam ! Clean residual mean=-0.000035 rms=0.001728 Jy/beam ! Combined flux in latest and established models = 0.649737 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 100 components and 0.649737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135007Jy sigma=0.000610 ! Fit after self-cal, rms=0.135017Jy sigma=0.000610 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000346867 Jy ! Component: 100 - total flux cleaned = -0.000405767 Jy ! Component: 150 - total flux cleaned = -0.000459411 Jy ! Component: 200 - total flux cleaned = -0.000507564 Jy ! Total flux subtracted in 200 components = -0.000507564 Jy ! Clean residual min=-0.007687 max=0.006471 Jy/beam ! Clean residual mean=-0.000036 rms=0.001719 Jy/beam ! Combined flux in latest and established models = 0.649229 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 102 components and 0.649229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134950Jy sigma=0.000610 ! Fit after self-cal, rms=0.134962Jy sigma=0.000610 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134962Jy sigma=0.000610 ! Fit after self-cal, rms=0.135159Jy sigma=0.000610 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.587 mas, bmaj=8.187 mas, bpa=-3.352 degrees ! Estimated noise=3580.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.453722 Jy ! Component: 100 - total flux cleaned = 0.555112 Jy ! Component: 150 - total flux cleaned = 0.591559 Jy ! Component: 200 - total flux cleaned = 0.611585 Jy ! Total flux subtracted in 200 components = 0.611585 Jy ! Clean residual min=-0.010338 max=0.010856 Jy/beam ! Clean residual mean=-0.000016 rms=0.002501 Jy/beam ! Combined flux in latest and established models = 0.611585 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.611585 Jy ! Inverting map and beam ! Estimated beam: bmin=3.14 mas, bmaj=9.266 mas, bpa=-4.349 degrees ! Estimated noise=2843.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0167492 Jy ! Component: 100 - total flux cleaned = 0.0258461 Jy ! Component: 150 - total flux cleaned = 0.0311913 Jy ! Component: 200 - total flux cleaned = 0.0335543 Jy ! Total flux subtracted in 200 components = 0.0335543 Jy ! Clean residual min=-0.007133 max=0.007141 Jy/beam ! Clean residual mean=-0.000035 rms=0.001800 Jy/beam ! Combined flux in latest and established models = 0.64514 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 41 components and 0.64514 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.596 mas, bmaj=23.33 mas, bpa=6.906 degrees ! Estimated noise=3511.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00218445 Jy ! Component: 100 - total flux cleaned = 0.00263441 Jy ! Component: 150 - total flux cleaned = 0.00308557 Jy ! Component: 200 - total flux cleaned = 0.00343913 Jy ! Total flux subtracted in 200 components = 0.00343913 Jy ! Clean residual min=-0.006598 max=0.007260 Jy/beam ! Clean residual mean=-0.000057 rms=0.002077 Jy/beam ! Combined flux in latest and established models = 0.648579 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000226476 Jy ! Component: 100 - total flux cleaned = 0.000413944 Jy ! Component: 150 - total flux cleaned = 0.000498027 Jy ! Component: 200 - total flux cleaned = 0.000576654 Jy ! Total flux subtracted in 200 components = 0.000576654 Jy ! Clean residual min=-0.006455 max=0.007006 Jy/beam ! Clean residual mean=-0.000057 rms=0.002048 Jy/beam ! Combined flux in latest and established models = 0.649156 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 47 components and 0.649156 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.14 mas, bmaj=9.266 mas, bpa=-4.349 degrees ! Estimated noise=2843.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000512977 Jy ! Component: 100 - total flux cleaned = -0.000404754 Jy ! Component: 150 - total flux cleaned = -0.000322182 Jy ! Component: 200 - total flux cleaned = -0.000400438 Jy ! Total flux subtracted in 200 components = -0.000400438 Jy ! Clean residual min=-0.007164 max=0.006689 Jy/beam ! Clean residual mean=-0.000034 rms=0.001722 Jy/beam ! Combined flux in latest and established models = 0.648755 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 57 components and 0.648755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135400Jy sigma=0.000610 ! Fit after self-cal, rms=0.135336Jy sigma=0.000610 wmodel J2359-3133_S_2017_03_27_pus_map.mod ! Writing 57 model components to file: J2359-3133_S_2017_03_27_pus_map.mod wobs J2359-3133_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J2359-3133_S_2017_03_27_pus_uvs.fits wwins J2359-3133_S_2017_03_27_pus_map.win ! wwins: Wrote 3 windows to J2359-3133_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -3.92959e-05 Jy ! Component: 100 - total flux cleaned = 0.000753124 Jy ! Component: 150 - total flux cleaned = 0.000963679 Jy ! Component: 200 - total flux cleaned = 0.00156299 Jy ! Component: 250 - total flux cleaned = 0.00166118 Jy ! Component: 300 - total flux cleaned = 0.00156978 Jy ! Component: 350 - total flux cleaned = 0.00130271 Jy ! Component: 400 - total flux cleaned = 0.001391 Jy ! Component: 450 - total flux cleaned = 0.00113368 Jy ! Component: 500 - total flux cleaned = 0.00121539 Jy ! Component: 550 - total flux cleaned = 0.000805796 Jy ! Component: 600 - total flux cleaned = 0.000567309 Jy ! Component: 650 - total flux cleaned = 0.000488334 Jy ! Component: 700 - total flux cleaned = 0.000563456 Jy ! Component: 750 - total flux cleaned = 0.000337197 Jy ! Component: 800 - total flux cleaned = 0.00033757 Jy ! Component: 850 - total flux cleaned = 0.000265507 Jy ! Component: 900 - total flux cleaned = 0.000335411 Jy ! Component: 950 - total flux cleaned = 0.000403464 Jy ! Component: 1000 - total flux cleaned = 0.000403012 Jy ! Component: 1050 - total flux cleaned = 0.000335016 Jy ! Component: 1100 - total flux cleaned = 0.000138737 Jy ! Component: 1150 - total flux cleaned = 0.000139962 Jy ! Component: 1200 - total flux cleaned = 7.59555e-05 Jy ! Component: 1250 - total flux cleaned = -4.92941e-05 Jy ! Component: 1300 - total flux cleaned = -4.91944e-05 Jy ! Component: 1350 - total flux cleaned = -0.000172638 Jy ! Component: 1400 - total flux cleaned = -0.000173095 Jy ! Component: 1450 - total flux cleaned = -0.000173464 Jy ! Component: 1500 - total flux cleaned = -0.000231966 Jy ! Component: 1550 - total flux cleaned = -0.000232028 Jy ! Component: 1600 - total flux cleaned = -0.000174541 Jy ! Component: 1650 - total flux cleaned = 0.000106104 Jy ! Component: 1700 - total flux cleaned = 4.95332e-05 Jy ! Component: 1750 - total flux cleaned = 0.000214206 Jy ! Component: 1800 - total flux cleaned = 0.000430709 Jy ! Component: 1850 - total flux cleaned = 0.000592286 Jy ! Component: 1900 - total flux cleaned = 0.000698129 Jy ! Component: 1950 - total flux cleaned = 0.000854325 Jy ! Component: 2000 - total flux cleaned = 0.0010084 Jy ! Component: 2050 - total flux cleaned = 0.00111006 Jy ! Component: 2100 - total flux cleaned = 0.00126097 Jy ! Component: 2150 - total flux cleaned = 0.00131026 Jy ! Component: 2200 - total flux cleaned = 0.00140921 Jy ! Component: 2250 - total flux cleaned = 0.00170139 Jy ! Component: 2300 - total flux cleaned = 0.00170116 Jy ! Component: 2350 - total flux cleaned = 0.00174888 Jy ! Component: 2400 - total flux cleaned = 0.00203238 Jy ! Component: 2450 - total flux cleaned = 0.00217243 Jy ! Component: 2500 - total flux cleaned = 0.00226425 Jy ! Component: 2550 - total flux cleaned = 0.00240159 Jy ! Component: 2600 - total flux cleaned = 0.00253806 Jy ! Component: 2650 - total flux cleaned = 0.00267334 Jy ! Component: 2700 - total flux cleaned = 0.00276298 Jy ! Component: 2750 - total flux cleaned = 0.0029845 Jy ! Component: 2800 - total flux cleaned = 0.00302829 Jy ! Component: 2850 - total flux cleaned = 0.003202 Jy ! Component: 2900 - total flux cleaned = 0.00315905 Jy ! Component: 2950 - total flux cleaned = 0.00328728 Jy ! Component: 3000 - total flux cleaned = 0.00341405 Jy ! Component: 3050 - total flux cleaned = 0.00341402 Jy ! Component: 3100 - total flux cleaned = 0.00341373 Jy ! Component: 3150 - total flux cleaned = 0.00341348 Jy ! Component: 3200 - total flux cleaned = 0.00337221 Jy ! Component: 3250 - total flux cleaned = 0.00337191 Jy ! Component: 3300 - total flux cleaned = 0.00341223 Jy ! Component: 3350 - total flux cleaned = 0.00321211 Jy ! Component: 3400 - total flux cleaned = 0.00317287 Jy ! Component: 3450 - total flux cleaned = 0.00325248 Jy ! Component: 3500 - total flux cleaned = 0.00329127 Jy ! Component: 3550 - total flux cleaned = 0.00329121 Jy ! Component: 3600 - total flux cleaned = 0.00325301 Jy ! Component: 3650 - total flux cleaned = 0.00333021 Jy ! Component: 3700 - total flux cleaned = 0.00333017 Jy ! Component: 3750 - total flux cleaned = 0.00325468 Jy ! Component: 3800 - total flux cleaned = 0.00336739 Jy ! Component: 3850 - total flux cleaned = 0.00336748 Jy ! Component: 3900 - total flux cleaned = 0.00333046 Jy ! Component: 3950 - total flux cleaned = 0.00336713 Jy ! Component: 4000 - total flux cleaned = 0.0032576 Jy ! Component: 4050 - total flux cleaned = 0.00347507 Jy ! Total flux subtracted in 4096 components = 0.00333094 Jy ! Clean residual min=-0.002073 max=0.002584 Jy/beam ! Clean residual mean=-0.000007 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.652086 Jy keep ! Adding 262 model components to the UV plane model. ! The established model now contains 319 components and 0.652086 Jy ![Exited script file: muppet] wmap "J2359-3133_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.14 x 9.266 at -4.349 degrees (North through East) ! Clean map min=-0.0050586 max=0.57281 Jy/beam ! Writing clean map to FITS file: J2359-3133_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.572814 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000682532 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.357462 0.357462 0.714925 1.42985 2.8597 5.7194 11.4388 22.8776 45.7552 91.5104 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.572 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.14 x 9.266 at -4.349 degrees (North through East) ! Clean map min=-0.0050586 max=0.57281 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2359-3133_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:53:03 2019