! Started logfile: J2359-3133_S_2017_03_23_pus_uvs.log on Mon May 13 10:12:29 2019 obs J2359-3133_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J2359-3133_S_2017_03_23_pus_uva.fits ! AN table 1: 31 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.357706 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2359-3133 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 1996 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2359-3133_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 199 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 170 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 167 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 218 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.550818Jy sigma=0.003435 ! Fit after self-cal, rms=0.503433Jy sigma=0.003158 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.675 mas, bmaj=7.462 mas, bpa=-8.991 degrees ! Estimated noise=4414.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.42549 Jy ! Component: 100 - total flux cleaned = 0.51868 Jy ! Total flux subtracted in 100 components = 0.51868 Jy ! Clean residual min=-0.036978 max=0.053177 Jy/beam ! Clean residual mean=0.000379 rms=0.010878 Jy/beam ! Combined flux in latest and established models = 0.51868 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.51868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227716Jy sigma=0.001342 ! Fit after self-cal, rms=0.227715Jy sigma=0.001342 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.355 mas, bmaj=8.888 mas, bpa=-7.35 degrees ! Estimated noise=3105.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0235165 Jy ! Component: 100 - total flux cleaned = 0.0295757 Jy ! Component: 150 - total flux cleaned = 0.029816 Jy ! Component: 200 - total flux cleaned = 0.0302159 Jy ! Total flux subtracted in 200 components = 0.0302159 Jy ! Clean residual min=-0.048039 max=0.054518 Jy/beam ! Clean residual mean=0.000474 rms=0.017554 Jy/beam ! Combined flux in latest and established models = 0.548896 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.548896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224401Jy sigma=0.001336 ! Fit after self-cal, rms=0.224410Jy sigma=0.001336 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.94 HN 1.00* KP 0.93 ! LA 0.94 MK 0.96 NL 1.00* OV 0.95 ! PT 1.15 SC 0.98 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 1.16 KP 0.90 ! LA 0.91 MK 0.96 NL 0.88 OV 1.00 ! PT 1.13 SC 1.09 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.01 HN 1.13 KP 0.78 ! LA 0.71 MK 1.00 NL 1.07 OV 0.89 ! PT 1.15 SC 1.05 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.05 HN 1.00* KP 1.00* ! LA 0.69 MK 1.17 NL 1.00* OV 1.83 ! PT 1.25 SC 1.00* ! ! ! Fit before self-cal, rms=0.224410Jy sigma=0.001336 ! Fit after self-cal, rms=0.194312Jy sigma=0.001101 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.369 mas, bmaj=8.923 mas, bpa=-7.344 degrees ! Estimated noise=3071.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00851728 Jy ! Component: 100 - total flux cleaned = -0.0100111 Jy ! Component: 150 - total flux cleaned = -0.0101535 Jy ! Component: 200 - total flux cleaned = -0.0102913 Jy ! Total flux subtracted in 200 components = -0.0102913 Jy ! Clean residual min=-0.040398 max=0.045869 Jy/beam ! Clean residual mean=0.000508 rms=0.014930 Jy/beam ! Combined flux in latest and established models = 0.538605 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 24 components and 0.538605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193591Jy sigma=0.001100 ! Fit after self-cal, rms=0.193780Jy sigma=0.001096 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193780Jy sigma=0.001096 ! Fit after self-cal, rms=0.267824Jy sigma=0.000697 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.361 mas, bmaj=8.887 mas, bpa=-7.506 degrees ! Estimated noise=3182.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0159023 Jy ! Component: 100 - total flux cleaned = 0.0219689 Jy ! Component: 150 - total flux cleaned = 0.0247022 Jy ! Component: 200 - total flux cleaned = 0.0250949 Jy ! Total flux subtracted in 200 components = 0.0250949 Jy ! Clean residual min=-0.015612 max=0.011043 Jy/beam ! Clean residual mean=-0.000001 rms=0.004116 Jy/beam ! Combined flux in latest and established models = 0.5637 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 40 components and 0.5637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.267737Jy sigma=0.000682 ! Fit after self-cal, rms=0.270760Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.37832e-05 Jy ! Component: 100 - total flux cleaned = 0.000100748 Jy ! Component: 150 - total flux cleaned = 0.000153192 Jy ! Component: 200 - total flux cleaned = 0.000202407 Jy ! Total flux subtracted in 200 components = 0.000202407 Jy ! Clean residual min=-0.015687 max=0.011086 Jy/beam ! Clean residual mean=0.000004 rms=0.004124 Jy/beam ! Combined flux in latest and established models = 0.563902 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 47 components and 0.563902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.270741Jy sigma=0.000680 ! Fit after self-cal, rms=0.270755Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.270755Jy sigma=0.000680 ! Fit after self-cal, rms=0.315469Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.363 mas, bmaj=8.89 mas, bpa=-7.527 degrees ! Estimated noise=3187.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000127225 Jy ! Component: 100 - total flux cleaned = -6.71261e-05 Jy ! Component: 150 - total flux cleaned = -0.000127783 Jy ! Component: 200 - total flux cleaned = -0.000185664 Jy ! Total flux subtracted in 200 components = -0.000185664 Jy ! Clean residual min=-0.007251 max=0.007065 Jy/beam ! Clean residual mean=0.000026 rms=0.001906 Jy/beam ! Combined flux in latest and established models = 0.563716 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 50 components and 0.563716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.315454Jy sigma=0.000641 ! Fit after self-cal, rms=0.315542Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.0846e-05 Jy ! Component: 100 - total flux cleaned = -9.02643e-05 Jy ! Component: 150 - total flux cleaned = -9.35968e-05 Jy ! Component: 200 - total flux cleaned = -0.000141393 Jy ! Total flux subtracted in 200 components = -0.000141393 Jy ! Clean residual min=-0.007178 max=0.007047 Jy/beam ! Clean residual mean=0.000027 rms=0.001897 Jy/beam ! Combined flux in latest and established models = 0.563575 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 51 components and 0.563575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.315530Jy sigma=0.000640 ! Fit after self-cal, rms=0.315516Jy sigma=0.000640 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.315516Jy sigma=0.000640 ! Fit after self-cal, rms=0.315995Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.488 mas, bmaj=25 mas, bpa=-3.156 degrees ! Estimated noise=3848.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.68075e-06 Jy ! Component: 100 - total flux cleaned = 3.37038e-05 Jy ! Component: 150 - total flux cleaned = 7.00863e-05 Jy ! Component: 200 - total flux cleaned = 7.05478e-05 Jy ! Total flux subtracted in 200 components = 7.05478e-05 Jy ! Clean residual min=-0.008771 max=0.005999 Jy/beam ! Clean residual mean=0.000051 rms=0.002314 Jy/beam ! Combined flux in latest and established models = 0.563645 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 56 components and 0.563645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.316008Jy sigma=0.000640 ! Fit after self-cal, rms=0.316016Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.99584e-05 Jy ! Component: 100 - total flux cleaned = -1.2182e-05 Jy ! Component: 150 - total flux cleaned = 2.15682e-05 Jy ! Component: 200 - total flux cleaned = 5.1554e-05 Jy ! Total flux subtracted in 200 components = 5.1554e-05 Jy ! Clean residual min=-0.008757 max=0.006021 Jy/beam ! Clean residual mean=0.000051 rms=0.002306 Jy/beam ! Combined flux in latest and established models = 0.563697 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 56 components and 0.563697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.316028Jy sigma=0.000640 ! Fit after self-cal, rms=0.316012Jy sigma=0.000640 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.361 mas, bmaj=8.886 mas, bpa=-7.522 degrees ! Estimated noise=3186.49 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.361 x 8.886 at -7.522 degrees (North through East) ! Clean map min=-0.0068362 max=0.53198 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.316012Jy sigma=0.000640 ! Fit after self-cal, rms=0.561086Jy sigma=0.000587 ! Inverting map and beam ! Estimated beam: bmin=3.359 mas, bmaj=8.873 mas, bpa=-7.444 degrees ! Estimated noise=3183.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.22966e-05 Jy ! Component: 100 - total flux cleaned = -0.00013691 Jy ! Component: 150 - total flux cleaned = -0.000180209 Jy ! Component: 200 - total flux cleaned = -0.000221803 Jy ! Total flux subtracted in 200 components = -0.000221803 Jy ! Clean residual min=-0.007087 max=0.006926 Jy/beam ! Clean residual mean=0.000026 rms=0.001869 Jy/beam ! Combined flux in latest and established models = 0.563475 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 61 components and 0.563475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.561091Jy sigma=0.000587 ! Fit after self-cal, rms=0.561077Jy sigma=0.000587 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000103414 Jy ! Component: 100 - total flux cleaned = -6.16202e-05 Jy ! Component: 150 - total flux cleaned = -0.000100237 Jy ! Component: 200 - total flux cleaned = -0.000137594 Jy ! Total flux subtracted in 200 components = -0.000137594 Jy ! Clean residual min=-0.007055 max=0.006932 Jy/beam ! Clean residual mean=0.000026 rms=0.001864 Jy/beam ! Combined flux in latest and established models = 0.563338 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 61 components and 0.563338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.561079Jy sigma=0.000587 ! Fit after self-cal, rms=0.561065Jy sigma=0.000587 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.561065Jy sigma=0.000587 ! Fit after self-cal, rms=0.562459Jy sigma=0.000587 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.687 mas, bmaj=7.462 mas, bpa=-9.249 degrees ! Estimated noise=3906.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.431504 Jy ! Component: 100 - total flux cleaned = 0.525784 Jy ! Component: 150 - total flux cleaned = 0.549988 Jy ! Component: 200 - total flux cleaned = 0.55852 Jy ! Total flux subtracted in 200 components = 0.55852 Jy ! Clean residual min=-0.010802 max=0.010704 Jy/beam ! Clean residual mean=0.000034 rms=0.002546 Jy/beam ! Combined flux in latest and established models = 0.558521 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.558521 Jy ! Inverting map and beam ! Estimated beam: bmin=3.358 mas, bmaj=8.871 mas, bpa=-7.434 degrees ! Estimated noise=3183.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274786 Jy ! Component: 100 - total flux cleaned = 0.00308383 Jy ! Component: 150 - total flux cleaned = 0.00308708 Jy ! Component: 200 - total flux cleaned = 0.00320736 Jy ! Total flux subtracted in 200 components = 0.00320736 Jy ! Clean residual min=-0.007536 max=0.007107 Jy/beam ! Clean residual mean=0.000026 rms=0.001938 Jy/beam ! Combined flux in latest and established models = 0.561728 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 19 components and 0.561728 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.485 mas, bmaj=24.98 mas, bpa=-3.085 degrees ! Estimated noise=3848.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188868 Jy ! Component: 100 - total flux cleaned = 0.00189065 Jy ! Component: 150 - total flux cleaned = 0.00183365 Jy ! Component: 200 - total flux cleaned = 0.00174229 Jy ! Total flux subtracted in 200 components = 0.00174229 Jy ! Clean residual min=-0.008620 max=0.006258 Jy/beam ! Clean residual mean=0.000050 rms=0.002260 Jy/beam ! Combined flux in latest and established models = 0.56347 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.159e-05 Jy ! Component: 100 - total flux cleaned = -7.80199e-05 Jy ! Component: 150 - total flux cleaned = -4.51265e-05 Jy ! Component: 200 - total flux cleaned = -4.45299e-05 Jy ! Total flux subtracted in 200 components = -4.45299e-05 Jy ! Clean residual min=-0.008617 max=0.006319 Jy/beam ! Clean residual mean=0.000050 rms=0.002258 Jy/beam ! Combined flux in latest and established models = 0.563426 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 0.563426 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.358 mas, bmaj=8.871 mas, bpa=-7.434 degrees ! Estimated noise=3183.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000434051 Jy ! Component: 100 - total flux cleaned = -0.000527813 Jy ! Component: 150 - total flux cleaned = -0.000528738 Jy ! Component: 200 - total flux cleaned = -0.000607457 Jy ! Total flux subtracted in 200 components = -0.000607457 Jy ! Clean residual min=-0.007231 max=0.006895 Jy/beam ! Clean residual mean=0.000027 rms=0.001888 Jy/beam ! Combined flux in latest and established models = 0.562818 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 36 components and 0.562818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.562561Jy sigma=0.000588 ! Fit after self-cal, rms=0.562437Jy sigma=0.000587 wmodel J2359-3133_S_2017_03_23_pus_map.mod ! Writing 36 model components to file: J2359-3133_S_2017_03_23_pus_map.mod wobs J2359-3133_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J2359-3133_S_2017_03_23_pus_uvs.fits wwins J2359-3133_S_2017_03_23_pus_map.win ! wwins: Wrote 1 windows to J2359-3133_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -3.37167e-05 Jy ! Component: 100 - total flux cleaned = -0.000152681 Jy ! Component: 150 - total flux cleaned = -0.000264656 Jy ! Component: 200 - total flux cleaned = -5.06716e-05 Jy ! Component: 250 - total flux cleaned = -4.90645e-05 Jy ! Component: 300 - total flux cleaned = 0.000332471 Jy ! Component: 350 - total flux cleaned = 0.000695215 Jy ! Component: 400 - total flux cleaned = 0.00130767 Jy ! Component: 450 - total flux cleaned = 0.00173068 Jy ! Component: 500 - total flux cleaned = 0.00247109 Jy ! Component: 550 - total flux cleaned = 0.00319011 Jy ! Component: 600 - total flux cleaned = 0.00365584 Jy ! Component: 650 - total flux cleaned = 0.00395816 Jy ! Component: 700 - total flux cleaned = 0.00440064 Jy ! Component: 750 - total flux cleaned = 0.00490467 Jy ! Component: 800 - total flux cleaned = 0.00539635 Jy ! Component: 850 - total flux cleaned = 0.00580828 Jy ! Component: 900 - total flux cleaned = 0.00641251 Jy ! Component: 950 - total flux cleaned = 0.00687355 Jy ! Component: 1000 - total flux cleaned = 0.0075829 Jy ! Component: 1050 - total flux cleaned = 0.00827821 Jy ! Component: 1100 - total flux cleaned = 0.00871326 Jy ! Component: 1150 - total flux cleaned = 0.00944655 Jy ! Component: 1200 - total flux cleaned = 0.010108 Jy ! Component: 1250 - total flux cleaned = 0.0108168 Jy ! Component: 1300 - total flux cleaned = 0.0112241 Jy ! Component: 1350 - total flux cleaned = 0.0119691 Jy ! Component: 1400 - total flux cleaned = 0.012477 Jy ! Component: 1450 - total flux cleaned = 0.0128667 Jy ! Component: 1500 - total flux cleaned = 0.0135794 Jy ! Component: 1550 - total flux cleaned = 0.0142275 Jy ! Component: 1600 - total flux cleaned = 0.0147599 Jy ! Component: 1650 - total flux cleaned = 0.0152854 Jy ! Component: 1700 - total flux cleaned = 0.0160117 Jy ! Component: 1750 - total flux cleaned = 0.0164723 Jy ! Component: 1800 - total flux cleaned = 0.01708 Jy ! Component: 1850 - total flux cleaned = 0.0176305 Jy ! Component: 1900 - total flux cleaned = 0.0182726 Jy ! Component: 1950 - total flux cleaned = 0.0188575 Jy ! Component: 2000 - total flux cleaned = 0.019483 Jy ! Component: 2050 - total flux cleaned = 0.0199104 Jy ! Component: 2100 - total flux cleaned = 0.0203808 Jy ! Component: 2150 - total flux cleaned = 0.0207994 Jy ! Component: 2200 - total flux cleaned = 0.0213983 Jy ! Component: 2250 - total flux cleaned = 0.0218087 Jy ! Component: 2300 - total flux cleaned = 0.0222607 Jy ! Component: 2350 - total flux cleaned = 0.0225745 Jy ! Component: 2400 - total flux cleaned = 0.0231074 Jy ! Component: 2450 - total flux cleaned = 0.0235469 Jy ! Component: 2500 - total flux cleaned = 0.0237648 Jy ! Component: 2550 - total flux cleaned = 0.024024 Jy ! Component: 2600 - total flux cleaned = 0.024324 Jy ! Component: 2650 - total flux cleaned = 0.0245792 Jy ! Component: 2700 - total flux cleaned = 0.0249584 Jy ! Component: 2750 - total flux cleaned = 0.0252926 Jy ! Component: 2800 - total flux cleaned = 0.0256242 Jy ! Component: 2850 - total flux cleaned = 0.0258295 Jy ! Component: 2900 - total flux cleaned = 0.0259926 Jy ! Component: 2950 - total flux cleaned = 0.0263165 Jy ! Component: 3000 - total flux cleaned = 0.026397 Jy ! Component: 3050 - total flux cleaned = 0.026796 Jy ! Component: 3100 - total flux cleaned = 0.027034 Jy ! Component: 3150 - total flux cleaned = 0.027152 Jy ! Component: 3200 - total flux cleaned = 0.027465 Jy ! Component: 3250 - total flux cleaned = 0.0276979 Jy ! Component: 3300 - total flux cleaned = 0.0278904 Jy ! Component: 3350 - total flux cleaned = 0.0280817 Jy ! Component: 3400 - total flux cleaned = 0.0282719 Jy ! Component: 3450 - total flux cleaned = 0.0283856 Jy ! Component: 3500 - total flux cleaned = 0.0285365 Jy ! Component: 3550 - total flux cleaned = 0.0288362 Jy ! Component: 3600 - total flux cleaned = 0.0289851 Jy ! Component: 3650 - total flux cleaned = 0.0292811 Jy ! Component: 3700 - total flux cleaned = 0.0293916 Jy ! Component: 3750 - total flux cleaned = 0.029465 Jy ! Component: 3800 - total flux cleaned = 0.0296841 Jy ! Component: 3850 - total flux cleaned = 0.0297932 Jy ! Component: 3900 - total flux cleaned = 0.0299742 Jy ! Component: 3950 - total flux cleaned = 0.0301185 Jy ! Component: 4000 - total flux cleaned = 0.0301903 Jy ! Component: 4050 - total flux cleaned = 0.0302975 Jy ! Total flux subtracted in 4096 components = 0.0304047 Jy ! Clean residual min=-0.002380 max=0.002585 Jy/beam ! Clean residual mean=0.000032 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.593223 Jy keep ! Adding 231 model components to the UV plane model. ! The established model now contains 267 components and 0.593223 Jy ![Exited script file: muppet] wmap "J2359-3133_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.358 x 8.871 at -7.434 degrees (North through East) ! Clean map min=-0.0039017 max=0.53443 Jy/beam ! Writing clean map to FITS file: J2359-3133_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.534435 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000649474 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.364576 0.364576 0.729152 1.4583 2.91661 5.83321 11.6664 23.3329 46.6657 93.3314 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.534 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.358 x 8.871 at -7.434 degrees (North through East) ! Clean map min=-0.0039017 max=0.53443 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2359-3133_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:12:34 2019