! Started logfile: J2359-3133_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:27:15 2019 obs J2359-3133_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J2359-3133_S_2017_01_16_pus_uva.fits ! AN table 1: 34 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.626144 visibilities/baseline/integration-bin. ! Found source: J2359-3133 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 3832 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2359-3133_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 104 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.573716Jy sigma=0.002856 ! Fit after self-cal, rms=0.560812Jy sigma=0.002788 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.987 mas, bmaj=12.75 mas, bpa=15.71 degrees ! Estimated noise=3020.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.394529 Jy ! Component: 100 - total flux cleaned = 0.486565 Jy ! Total flux subtracted in 100 components = 0.486565 Jy ! Clean residual min=-0.024156 max=0.037064 Jy/beam ! Clean residual mean=0.000253 rms=0.006732 Jy/beam ! Combined flux in latest and established models = 0.486565 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.486565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.272913Jy sigma=0.001033 ! Fit after self-cal, rms=0.272923Jy sigma=0.001033 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.805 mas, bmaj=16.3 mas, bpa=16.31 degrees ! Estimated noise=2197.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0447824 Jy ! Component: 100 - total flux cleaned = 0.0653564 Jy ! Component: 150 - total flux cleaned = 0.0759793 Jy ! Component: 200 - total flux cleaned = 0.0795449 Jy ! Total flux subtracted in 200 components = 0.0795449 Jy ! Clean residual min=-0.018430 max=0.024590 Jy/beam ! Clean residual mean=0.000383 rms=0.006581 Jy/beam ! Combined flux in latest and established models = 0.56611 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 38 components and 0.56611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.267232Jy sigma=0.000956 ! Fit after self-cal, rms=0.267292Jy sigma=0.000956 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.92 HN 1.11 KP 0.95 ! LA 0.98 MK 1.00* NL 0.88 OV 0.90 ! PT 1.04 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.95 HN 1.21 KP 0.93 ! LA 0.97 MK 1.00* NL 1.04 OV 0.92 ! PT 1.03 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.98 HN 1.17 KP 0.97 ! LA 1.02 MK 1.00* NL 1.00 OV 0.85 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.98 HN 1.13 KP 1.33 ! LA 0.92 MK 1.00* NL 1.00* OV 0.91 ! PT 0.99 SC 0.99 ! ! ! Fit before self-cal, rms=0.267292Jy sigma=0.000956 ! Fit after self-cal, rms=0.281345Jy sigma=0.000898 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.799 mas, bmaj=16.52 mas, bpa=16.58 degrees ! Estimated noise=2177.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0135589 Jy ! Component: 100 - total flux cleaned = -0.0174952 Jy ! Component: 150 - total flux cleaned = -0.0183438 Jy ! Component: 200 - total flux cleaned = -0.0189288 Jy ! Total flux subtracted in 200 components = -0.0189288 Jy ! Clean residual min=-0.017543 max=0.021249 Jy/beam ! Clean residual mean=0.000297 rms=0.005679 Jy/beam ! Combined flux in latest and established models = 0.547181 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 51 components and 0.547181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.280820Jy sigma=0.000894 ! Fit after self-cal, rms=0.280985Jy sigma=0.000894 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.280985Jy sigma=0.000894 ! Fit after self-cal, rms=0.245934Jy sigma=0.000674 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.793 mas, bmaj=16.48 mas, bpa=16.5 degrees ! Estimated noise=2175.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00266371 Jy ! Component: 100 - total flux cleaned = -0.00299169 Jy ! Component: 150 - total flux cleaned = -0.00312551 Jy ! Component: 200 - total flux cleaned = -0.00323025 Jy ! Total flux subtracted in 200 components = -0.00323025 Jy ! Clean residual min=-0.006807 max=0.006622 Jy/beam ! Clean residual mean=-0.000063 rms=0.001979 Jy/beam ! Combined flux in latest and established models = 0.54395 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 61 components and 0.54395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245694Jy sigma=0.000672 ! Fit after self-cal, rms=0.247234Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.94199e-05 Jy ! Component: 100 - total flux cleaned = 9.40774e-05 Jy ! Component: 150 - total flux cleaned = 8.95609e-05 Jy ! Component: 200 - total flux cleaned = 3.11141e-05 Jy ! Total flux subtracted in 200 components = 3.11141e-05 Jy ! Clean residual min=-0.006832 max=0.006447 Jy/beam ! Clean residual mean=-0.000065 rms=0.001950 Jy/beam ! Combined flux in latest and established models = 0.543982 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 66 components and 0.543982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247182Jy sigma=0.000670 ! Fit after self-cal, rms=0.247174Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247174Jy sigma=0.000670 ! Fit after self-cal, rms=0.252860Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.793 mas, bmaj=16.49 mas, bpa=16.46 degrees ! Estimated noise=2176.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00181502 Jy ! Component: 100 - total flux cleaned = -0.00189566 Jy ! Component: 150 - total flux cleaned = -0.0019591 Jy ! Component: 200 - total flux cleaned = -0.00200803 Jy ! Total flux subtracted in 200 components = -0.00200803 Jy ! Clean residual min=-0.004957 max=0.004844 Jy/beam ! Clean residual mean=-0.000052 rms=0.001407 Jy/beam ! Combined flux in latest and established models = 0.541974 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 70 components and 0.541973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252790Jy sigma=0.000645 ! Fit after self-cal, rms=0.252814Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000188818 Jy ! Component: 100 - total flux cleaned = -0.000233358 Jy ! Component: 150 - total flux cleaned = -0.000274377 Jy ! Component: 200 - total flux cleaned = -0.00039403 Jy ! Total flux subtracted in 200 components = -0.00039403 Jy ! Clean residual min=-0.004986 max=0.004850 Jy/beam ! Clean residual mean=-0.000053 rms=0.001405 Jy/beam ! Combined flux in latest and established models = 0.541579 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 79 components and 0.541579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252777Jy sigma=0.000645 ! Fit after self-cal, rms=0.252777Jy sigma=0.000645 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252777Jy sigma=0.000645 ! Fit after self-cal, rms=0.253565Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.463 mas, bmaj=24.53 mas, bpa=6.468 degrees ! Estimated noise=2507.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00145553 Jy ! Component: 100 - total flux cleaned = -0.00163036 Jy ! Component: 150 - total flux cleaned = -0.00178403 Jy ! Component: 200 - total flux cleaned = -0.0019217 Jy ! Total flux subtracted in 200 components = -0.0019217 Jy ! Clean residual min=-0.004850 max=0.004639 Jy/beam ! Clean residual mean=-0.000085 rms=0.001594 Jy/beam ! Combined flux in latest and established models = 0.539658 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 82 components and 0.539658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253547Jy sigma=0.000644 ! Fit after self-cal, rms=0.253543Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000194036 Jy ! Component: 100 - total flux cleaned = -0.000278058 Jy ! Component: 150 - total flux cleaned = -0.000304234 Jy ! Component: 200 - total flux cleaned = -0.00030398 Jy ! Total flux subtracted in 200 components = -0.00030398 Jy ! Clean residual min=-0.004829 max=0.004701 Jy/beam ! Clean residual mean=-0.000086 rms=0.001596 Jy/beam ! Combined flux in latest and established models = 0.539354 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 94 components and 0.539354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253540Jy sigma=0.000644 ! Fit after self-cal, rms=0.253543Jy sigma=0.000644 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.794 mas, bmaj=16.51 mas, bpa=16.44 degrees ! Estimated noise=2175.23 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.794 x 16.51 at 16.44 degrees (North through East) ! Clean map min=-0.0046728 max=0.49801 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.961 mas, bmaj=12.86 mas, bpa=15.94 degrees ! Estimated noise=3017.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.393967 Jy ! Component: 100 - total flux cleaned = 0.480364 Jy ! Component: 150 - total flux cleaned = 0.506595 Jy ! Component: 200 - total flux cleaned = 0.51888 Jy ! Total flux subtracted in 200 components = 0.51888 Jy ! Clean residual min=-0.008733 max=0.008085 Jy/beam ! Clean residual mean=-0.000005 rms=0.002092 Jy/beam ! Combined flux in latest and established models = 0.51888 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.51888 Jy ! Inverting map and beam ! Estimated beam: bmin=3.794 mas, bmaj=16.51 mas, bpa=16.44 degrees ! Estimated noise=2175.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108495 Jy ! Component: 100 - total flux cleaned = 0.0163168 Jy ! Component: 150 - total flux cleaned = 0.0187517 Jy ! Component: 200 - total flux cleaned = 0.0193918 Jy ! Total flux subtracted in 200 components = 0.0193918 Jy ! Clean residual min=-0.005073 max=0.004812 Jy/beam ! Clean residual mean=-0.000054 rms=0.001403 Jy/beam ! Combined flux in latest and established models = 0.538272 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 52 components and 0.538272 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.463 mas, bmaj=24.53 mas, bpa=6.468 degrees ! Estimated noise=2507.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145225 Jy ! Component: 100 - total flux cleaned = 0.00158164 Jy ! Component: 150 - total flux cleaned = 0.00166161 Jy ! Component: 200 - total flux cleaned = 0.00166336 Jy ! Total flux subtracted in 200 components = 0.00166336 Jy ! Clean residual min=-0.004997 max=0.004846 Jy/beam ! Clean residual mean=-0.000085 rms=0.001612 Jy/beam ! Combined flux in latest and established models = 0.539936 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.16303e-06 Jy ! Component: 100 - total flux cleaned = 8.8729e-07 Jy ! Component: 150 - total flux cleaned = 6.11735e-07 Jy ! Component: 200 - total flux cleaned = -6.00485e-07 Jy ! Total flux subtracted in 200 components = -6.00485e-07 Jy ! Clean residual min=-0.004973 max=0.004835 Jy/beam ! Clean residual mean=-0.000085 rms=0.001604 Jy/beam ! Combined flux in latest and established models = 0.539935 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 64 components and 0.539935 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.794 mas, bmaj=16.51 mas, bpa=16.44 degrees ! Estimated noise=2175.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.23096e-05 Jy ! Component: 100 - total flux cleaned = 7.96586e-05 Jy ! Component: 150 - total flux cleaned = 7.79616e-05 Jy ! Component: 200 - total flux cleaned = 4.14931e-05 Jy ! Total flux subtracted in 200 components = 4.14931e-05 Jy ! Clean residual min=-0.004977 max=0.004702 Jy/beam ! Clean residual mean=-0.000053 rms=0.001378 Jy/beam ! Combined flux in latest and established models = 0.539976 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 75 components and 0.539976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253463Jy sigma=0.000645 ! Fit after self-cal, rms=0.253460Jy sigma=0.000644 wmodel J2359-3133_S_2017_01_16_pus_map.mod ! Writing 75 model components to file: J2359-3133_S_2017_01_16_pus_map.mod wobs J2359-3133_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J2359-3133_S_2017_01_16_pus_uvs.fits wwins J2359-3133_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J2359-3133_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00148034 Jy ! Component: 100 - total flux cleaned = -0.00267169 Jy ! Component: 150 - total flux cleaned = -0.0036469 Jy ! Component: 200 - total flux cleaned = -0.00396039 Jy ! Component: 250 - total flux cleaned = -0.00411387 Jy ! Component: 300 - total flux cleaned = -0.00448655 Jy ! Component: 350 - total flux cleaned = -0.00448657 Jy ! Component: 400 - total flux cleaned = -0.0047718 Jy ! Component: 450 - total flux cleaned = -0.00497982 Jy ! Component: 500 - total flux cleaned = -0.00498071 Jy ! Component: 550 - total flux cleaned = -0.00511512 Jy ! Component: 600 - total flux cleaned = -0.00498565 Jy ! Component: 650 - total flux cleaned = -0.00517982 Jy ! Component: 700 - total flux cleaned = -0.00524239 Jy ! Component: 750 - total flux cleaned = -0.00536704 Jy ! Component: 800 - total flux cleaned = -0.00536743 Jy ! Component: 850 - total flux cleaned = -0.00536898 Jy ! Component: 900 - total flux cleaned = -0.00548671 Jy ! Component: 950 - total flux cleaned = -0.00530985 Jy ! Component: 1000 - total flux cleaned = -0.00531006 Jy ! Component: 1050 - total flux cleaned = -0.00513888 Jy ! Component: 1100 - total flux cleaned = -0.00513936 Jy ! Component: 1150 - total flux cleaned = -0.00519464 Jy ! Component: 1200 - total flux cleaned = -0.00524848 Jy ! Component: 1250 - total flux cleaned = -0.0050325 Jy ! Component: 1300 - total flux cleaned = -0.00497899 Jy ! Component: 1350 - total flux cleaned = -0.00503186 Jy ! Component: 1400 - total flux cleaned = -0.00482197 Jy ! Component: 1450 - total flux cleaned = -0.00456359 Jy ! Component: 1500 - total flux cleaned = -0.00461493 Jy ! Component: 1550 - total flux cleaned = -0.00436083 Jy ! Component: 1600 - total flux cleaned = -0.00421141 Jy ! Component: 1650 - total flux cleaned = -0.00411092 Jy ! Component: 1700 - total flux cleaned = -0.0039131 Jy ! Component: 1750 - total flux cleaned = -0.00361883 Jy ! Component: 1800 - total flux cleaned = -0.0033754 Jy ! Component: 1850 - total flux cleaned = -0.00323086 Jy ! Component: 1900 - total flux cleaned = -0.00299179 Jy ! Component: 1950 - total flux cleaned = -0.00275444 Jy ! Component: 2000 - total flux cleaned = -0.00256645 Jy ! Component: 2050 - total flux cleaned = -0.00242669 Jy ! Component: 2100 - total flux cleaned = -0.00228749 Jy ! Component: 2150 - total flux cleaned = -0.00191861 Jy ! Component: 2200 - total flux cleaned = -0.00187343 Jy ! Component: 2250 - total flux cleaned = -0.00164541 Jy ! Component: 2300 - total flux cleaned = -0.00146475 Jy ! Component: 2350 - total flux cleaned = -0.00110548 Jy ! Component: 2400 - total flux cleaned = -0.00101621 Jy ! Component: 2450 - total flux cleaned = -0.000883373 Jy ! Component: 2500 - total flux cleaned = -0.000575228 Jy ! Component: 2550 - total flux cleaned = -0.000487515 Jy ! Component: 2600 - total flux cleaned = -0.000269883 Jy ! Component: 2650 - total flux cleaned = -0.000226498 Jy ! Component: 2700 - total flux cleaned = -0.000140216 Jy ! Component: 2750 - total flux cleaned = 0.000158819 Jy ! Component: 2800 - total flux cleaned = 0.00037108 Jy ! Component: 2850 - total flux cleaned = 0.000371127 Jy ! Component: 2900 - total flux cleaned = 0.000623007 Jy ! Component: 2950 - total flux cleaned = 0.000664886 Jy ! Component: 3000 - total flux cleaned = 0.000996963 Jy ! Component: 3050 - total flux cleaned = 0.00103844 Jy ! Component: 3100 - total flux cleaned = 0.00116158 Jy ! Component: 3150 - total flux cleaned = 0.00140697 Jy ! Component: 3200 - total flux cleaned = 0.00140709 Jy ! Component: 3250 - total flux cleaned = 0.0015689 Jy ! Component: 3300 - total flux cleaned = 0.00173023 Jy ! Component: 3350 - total flux cleaned = 0.00189036 Jy ! Component: 3400 - total flux cleaned = 0.00204988 Jy ! Component: 3450 - total flux cleaned = 0.00228742 Jy ! Component: 3500 - total flux cleaned = 0.00248474 Jy ! Component: 3550 - total flux cleaned = 0.00256293 Jy ! Component: 3600 - total flux cleaned = 0.00268023 Jy ! Component: 3650 - total flux cleaned = 0.0026803 Jy ! Component: 3700 - total flux cleaned = 0.00287397 Jy ! Component: 3750 - total flux cleaned = 0.00310517 Jy ! Component: 3800 - total flux cleaned = 0.00318191 Jy ! Component: 3850 - total flux cleaned = 0.00337298 Jy ! Component: 3900 - total flux cleaned = 0.00348686 Jy ! Component: 3950 - total flux cleaned = 0.00356274 Jy ! Component: 4000 - total flux cleaned = 0.00375095 Jy ! Component: 4050 - total flux cleaned = 0.00390102 Jy ! Total flux subtracted in 4096 components = 0.00405038 Jy ! Clean residual min=-0.002196 max=0.002212 Jy/beam ! Clean residual mean=-0.000007 rms=0.000745 Jy/beam ! Combined flux in latest and established models = 0.544027 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 353 components and 0.544027 Jy ![Exited script file: muppet] wmap "J2359-3133_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.794 x 16.51 at 16.44 degrees (North through East) ! Clean map min=-0.0042433 max=0.49604 Jy/beam ! Writing clean map to FITS file: J2359-3133_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.496037 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000746468 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.451459 0.451459 0.902918 1.80584 3.61167 7.22334 14.4467 28.8934 57.7868 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.496 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.794 x 16.51 at 16.44 degrees (North through East) ! Clean map min=-0.0042433 max=0.49604 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2359-3133_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:27:20 2019