! Started logfile: J2359-0639_S_2017_10_21_pus_uvs.log on Sat May 11 21:08:49 2019 obs J2359-0639_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J2359-0639_S_2017_10_21_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.908541 visibilities/baseline/integration-bin. ! Found source: J2359-0639 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 38464 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2359-0639_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 149 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 413 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 839 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1848 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.963712Jy sigma=0.008952 ! Fit after self-cal, rms=0.925466Jy sigma=0.008625 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.574 mas, bmaj=16.32 mas, bpa=-18.06 degrees ! Estimated noise=981.141 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.057976 Jy ! Component: 100 - total flux cleaned = 0.0713592 Jy ! Total flux subtracted in 100 components = 0.0713592 Jy ! Clean residual min=-0.004923 max=0.007450 Jy/beam ! Clean residual mean=0.000022 rms=0.001591 Jy/beam ! Combined flux in latest and established models = 0.0713592 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0713592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089098Jy sigma=0.000742 ! Fit after self-cal, rms=0.088935Jy sigma=0.000741 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.261 mas, bmaj=18.42 mas, bpa=-17.32 degrees ! Estimated noise=511.227 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00850587 Jy ! Component: 100 - total flux cleaned = 0.0129513 Jy ! Component: 150 - total flux cleaned = 0.0158653 Jy ! Component: 200 - total flux cleaned = 0.0179236 Jy ! Total flux subtracted in 200 components = 0.0179236 Jy ! Clean residual min=-0.002968 max=0.003410 Jy/beam ! Clean residual mean=0.000017 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 0.0892828 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 41 components and 0.0892828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088078Jy sigma=0.000733 ! Fit after self-cal, rms=0.088070Jy sigma=0.000732 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.93 HN 1.00 KP 1.09 ! LA 1.02 MK 1.01 NL 1.05 OV 1.01 ! PT 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.06 KP 1.05 ! LA 0.97 MK 1.03 NL 1.13 OV 1.03 ! PT 0.90 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 0.97 KP 1.04 ! LA 0.80 MK 1.05 NL 0.68 OV 0.93 ! PT 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 0.82 KP 1.00* ! LA 0.81 MK 0.86 NL 1.00* OV 1.00* ! PT 0.86 ! ! ! Fit before self-cal, rms=0.088070Jy sigma=0.000732 ! Fit after self-cal, rms=0.085354Jy sigma=0.000728 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=18.89 mas, bpa=-17.27 degrees ! Estimated noise=507.151 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000355556 Jy ! Component: 100 - total flux cleaned = 0.00019458 Jy ! Component: 150 - total flux cleaned = 0.000124852 Jy ! Component: 200 - total flux cleaned = 0.000123844 Jy ! Total flux subtracted in 200 components = 0.000123844 Jy ! Clean residual min=-0.002431 max=0.002507 Jy/beam ! Clean residual mean=0.000003 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.0894066 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 0.0894066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085312Jy sigma=0.000727 ! Fit after self-cal, rms=0.085350Jy sigma=0.000727 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085350Jy sigma=0.000727 ! Fit after self-cal, rms=0.088951Jy sigma=0.000723 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.271 mas, bmaj=18.72 mas, bpa=-17.25 degrees ! Estimated noise=507.641 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.52872e-05 Jy ! Component: 100 - total flux cleaned = -0.000125787 Jy ! Component: 150 - total flux cleaned = -0.000210291 Jy ! Component: 200 - total flux cleaned = -0.000269493 Jy ! Total flux subtracted in 200 components = -0.000269493 Jy ! Clean residual min=-0.001696 max=0.001505 Jy/beam ! Clean residual mean=-0.000000 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.0891371 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 68 components and 0.0891371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088943Jy sigma=0.000723 ! Fit after self-cal, rms=0.089125Jy sigma=0.000722 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000176979 Jy ! Component: 100 - total flux cleaned = -0.000204469 Jy ! Component: 150 - total flux cleaned = -0.00020428 Jy ! Component: 200 - total flux cleaned = -0.000234447 Jy ! Total flux subtracted in 200 components = -0.000234447 Jy ! Clean residual min=-0.001830 max=0.001467 Jy/beam ! Clean residual mean=0.000000 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.0889027 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 79 components and 0.0889027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089121Jy sigma=0.000722 ! Fit after self-cal, rms=0.089122Jy sigma=0.000722 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089122Jy sigma=0.000722 ! Fit after self-cal, rms=0.092019Jy sigma=0.000722 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.272 mas, bmaj=18.67 mas, bpa=-17.23 degrees ! Estimated noise=507.598 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.0169e-05 Jy ! Component: 100 - total flux cleaned = -2.18083e-05 Jy ! Component: 150 - total flux cleaned = -4.19131e-05 Jy ! Component: 200 - total flux cleaned = -5.07849e-05 Jy ! Total flux subtracted in 200 components = -5.07849e-05 Jy ! Clean residual min=-0.001654 max=0.001390 Jy/beam ! Clean residual mean=-0.000000 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.0888519 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 89 components and 0.0888519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092016Jy sigma=0.000722 ! Fit after self-cal, rms=0.092163Jy sigma=0.000722 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.95435e-05 Jy ! Component: 100 - total flux cleaned = -8.68348e-05 Jy ! Component: 150 - total flux cleaned = -0.000110165 Jy ! Component: 200 - total flux cleaned = -0.00011714 Jy ! Total flux subtracted in 200 components = -0.00011714 Jy ! Clean residual min=-0.001667 max=0.001368 Jy/beam ! Clean residual mean=-0.000000 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.0887347 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 96 components and 0.0887347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092160Jy sigma=0.000722 ! Fit after self-cal, rms=0.092164Jy sigma=0.000722 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092164Jy sigma=0.000722 ! Fit after self-cal, rms=0.093989Jy sigma=0.000722 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.65 mas, bmaj=20.09 mas, bpa=-10.47 degrees ! Estimated noise=613.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000183326 Jy ! Component: 100 - total flux cleaned = 0.000183326 Jy ! Component: 150 - total flux cleaned = 0.000183527 Jy ! Component: 200 - total flux cleaned = 0.000183805 Jy ! Total flux subtracted in 200 components = 0.000183805 Jy ! Clean residual min=-0.001388 max=0.001547 Jy/beam ! Clean residual mean=-0.000001 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.0889185 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 102 components and 0.0889185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093988Jy sigma=0.000722 ! Fit after self-cal, rms=0.094102Jy sigma=0.000722 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.63794e-05 Jy ! Component: 100 - total flux cleaned = -5.13284e-05 Jy ! Component: 150 - total flux cleaned = -5.14573e-05 Jy ! Component: 200 - total flux cleaned = -5.54178e-05 Jy ! Total flux subtracted in 200 components = -5.54178e-05 Jy ! Clean residual min=-0.001378 max=0.001527 Jy/beam ! Clean residual mean=-0.000001 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.0888631 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 109 components and 0.0888631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094101Jy sigma=0.000722 ! Fit after self-cal, rms=0.094102Jy sigma=0.000722 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.274 mas, bmaj=18.67 mas, bpa=-17.21 degrees ! Estimated noise=507.907 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.274 x 18.67 at -17.21 degrees (North through East) ! Clean map min=-0.0015917 max=0.076597 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.541 mas, bmaj=16.89 mas, bpa=-17.84 degrees ! Estimated noise=990.145 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0583584 Jy ! Component: 100 - total flux cleaned = 0.0721203 Jy ! Component: 150 - total flux cleaned = 0.0783106 Jy ! Component: 200 - total flux cleaned = 0.0821572 Jy ! Total flux subtracted in 200 components = 0.0821572 Jy ! Clean residual min=-0.003108 max=0.003293 Jy/beam ! Clean residual mean=0.000000 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.0821572 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.0821572 Jy ! Inverting map and beam ! Estimated beam: bmin=3.274 mas, bmaj=18.67 mas, bpa=-17.21 degrees ! Estimated noise=507.907 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00350328 Jy ! Component: 100 - total flux cleaned = 0.00502172 Jy ! Component: 150 - total flux cleaned = 0.0053083 Jy ! Component: 200 - total flux cleaned = 0.00557579 Jy ! Total flux subtracted in 200 components = 0.00557579 Jy ! Clean residual min=-0.001638 max=0.001651 Jy/beam ! Clean residual mean=0.000000 rms=0.000411 Jy/beam ! Combined flux in latest and established models = 0.0877329 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 54 components and 0.0877329 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.65 mas, bmaj=20.09 mas, bpa=-10.47 degrees ! Estimated noise=613.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000396987 Jy ! Component: 100 - total flux cleaned = 0.000466923 Jy ! Component: 150 - total flux cleaned = 0.000521832 Jy ! Component: 200 - total flux cleaned = 0.000565095 Jy ! Total flux subtracted in 200 components = 0.000565095 Jy ! Clean residual min=-0.001392 max=0.001497 Jy/beam ! Clean residual mean=-0.000000 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.088298 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.44995e-05 Jy ! Component: 100 - total flux cleaned = 6.39734e-05 Jy ! Component: 150 - total flux cleaned = 9.13695e-05 Jy ! Component: 200 - total flux cleaned = 0.000110568 Jy ! Total flux subtracted in 200 components = 0.000110568 Jy ! Clean residual min=-0.001388 max=0.001486 Jy/beam ! Clean residual mean=-0.000001 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.0884086 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 82 components and 0.0884086 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.274 mas, bmaj=18.67 mas, bpa=-17.21 degrees ! Estimated noise=507.907 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000119231 Jy ! Component: 100 - total flux cleaned = 0.000138752 Jy ! Component: 150 - total flux cleaned = 0.00011962 Jy ! Component: 200 - total flux cleaned = 0.000101451 Jy ! Total flux subtracted in 200 components = 0.000101451 Jy ! Clean residual min=-0.001623 max=0.001453 Jy/beam ! Clean residual mean=-0.000000 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.0885101 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 97 components and 0.08851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094113Jy sigma=0.000722 ! Fit after self-cal, rms=0.094111Jy sigma=0.000722 wmodel J2359-0639_S_2017_10_21_pus_map.mod ! Writing 97 model components to file: J2359-0639_S_2017_10_21_pus_map.mod wobs J2359-0639_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J2359-0639_S_2017_10_21_pus_uvs.fits wwins J2359-0639_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J2359-0639_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000328987 Jy ! Component: 100 - total flux cleaned = -0.000303286 Jy ! Component: 150 - total flux cleaned = -0.000210498 Jy ! Component: 200 - total flux cleaned = -0.000145374 Jy ! Component: 250 - total flux cleaned = -6.14392e-05 Jy ! Component: 300 - total flux cleaned = 3.97817e-05 Jy ! Component: 350 - total flux cleaned = 0.000157045 Jy ! Component: 400 - total flux cleaned = 0.000290209 Jy ! Component: 450 - total flux cleaned = 0.000437138 Jy ! Component: 500 - total flux cleaned = 0.000490468 Jy ! Component: 550 - total flux cleaned = 0.000542581 Jy ! Component: 600 - total flux cleaned = 0.000662715 Jy ! Component: 650 - total flux cleaned = 0.000729831 Jy ! Component: 700 - total flux cleaned = 0.000828993 Jy ! Component: 750 - total flux cleaned = 0.000926018 Jy ! Component: 800 - total flux cleaned = 0.000973761 Jy ! Component: 850 - total flux cleaned = 0.00108323 Jy ! Component: 900 - total flux cleaned = 0.00119085 Jy ! Component: 950 - total flux cleaned = 0.00122083 Jy ! Component: 1000 - total flux cleaned = 0.00125064 Jy ! Component: 1050 - total flux cleaned = 0.0013243 Jy ! Component: 1100 - total flux cleaned = 0.00138257 Jy ! Component: 1150 - total flux cleaned = 0.00145434 Jy ! Component: 1200 - total flux cleaned = 0.00152491 Jy ! Component: 1250 - total flux cleaned = 0.00160867 Jy ! Component: 1300 - total flux cleaned = 0.00167772 Jy ! Component: 1350 - total flux cleaned = 0.00175962 Jy ! Component: 1400 - total flux cleaned = 0.00185412 Jy ! Component: 1450 - total flux cleaned = 0.00194736 Jy ! Component: 1500 - total flux cleaned = 0.00201325 Jy ! Component: 1550 - total flux cleaned = 0.00209132 Jy ! Component: 1600 - total flux cleaned = 0.00207854 Jy ! Component: 1650 - total flux cleaned = 0.00216779 Jy ! Component: 1700 - total flux cleaned = 0.00219313 Jy ! Component: 1750 - total flux cleaned = 0.00221823 Jy ! Component: 1800 - total flux cleaned = 0.00226793 Jy ! Component: 1850 - total flux cleaned = 0.00231687 Jy ! Component: 1900 - total flux cleaned = 0.00237757 Jy ! Component: 1950 - total flux cleaned = 0.00240151 Jy ! Component: 2000 - total flux cleaned = 0.00247285 Jy ! Component: 2050 - total flux cleaned = 0.00248477 Jy ! Component: 2100 - total flux cleaned = 0.00250832 Jy ! Component: 2150 - total flux cleaned = 0.0025547 Jy ! Component: 2200 - total flux cleaned = 0.00258913 Jy ! Component: 2250 - total flux cleaned = 0.00262304 Jy ! Component: 2300 - total flux cleaned = 0.00264535 Jy ! Component: 2350 - total flux cleaned = 0.00268992 Jy ! Component: 2400 - total flux cleaned = 0.00267882 Jy ! Component: 2450 - total flux cleaned = 0.00270087 Jy ! Component: 2500 - total flux cleaned = 0.00274428 Jy ! Component: 2550 - total flux cleaned = 0.00276565 Jy ! Component: 2600 - total flux cleaned = 0.00279778 Jy ! Component: 2650 - total flux cleaned = 0.00285066 Jy ! Component: 2700 - total flux cleaned = 0.00285074 Jy ! Component: 2750 - total flux cleaned = 0.0028923 Jy ! Component: 2800 - total flux cleaned = 0.00291289 Jy ! Component: 2850 - total flux cleaned = 0.0029129 Jy ! Component: 2900 - total flux cleaned = 0.00291289 Jy ! Component: 2950 - total flux cleaned = 0.00293307 Jy ! Component: 3000 - total flux cleaned = 0.002913 Jy ! Component: 3050 - total flux cleaned = 0.00290305 Jy ! Component: 3100 - total flux cleaned = 0.00291301 Jy ! Component: 3150 - total flux cleaned = 0.00293265 Jy ! Component: 3200 - total flux cleaned = 0.00291294 Jy ! Component: 3250 - total flux cleaned = 0.00289352 Jy ! Component: 3300 - total flux cleaned = 0.00285503 Jy ! Component: 3350 - total flux cleaned = 0.00283584 Jy ! Component: 3400 - total flux cleaned = 0.0028549 Jy ! Component: 3450 - total flux cleaned = 0.00278858 Jy ! Component: 3500 - total flux cleaned = 0.00276044 Jy ! Component: 3550 - total flux cleaned = 0.00273233 Jy ! Component: 3600 - total flux cleaned = 0.00271377 Jy ! Component: 3650 - total flux cleaned = 0.00268592 Jy ! Component: 3700 - total flux cleaned = 0.00264904 Jy ! Component: 3750 - total flux cleaned = 0.0026215 Jy ! Component: 3800 - total flux cleaned = 0.00261231 Jy ! Component: 3850 - total flux cleaned = 0.00256686 Jy ! Component: 3900 - total flux cleaned = 0.00253066 Jy ! Component: 3950 - total flux cleaned = 0.00252164 Jy ! Component: 4000 - total flux cleaned = 0.00250372 Jy ! Component: 4050 - total flux cleaned = 0.00246795 Jy ! Total flux subtracted in 4096 components = 0.00246799 Jy ! Clean residual min=-0.000496 max=0.000535 Jy/beam ! Clean residual mean=-0.000001 rms=0.000174 Jy/beam ! Combined flux in latest and established models = 0.090978 Jy keep ! Adding 294 model components to the UV plane model. ! The established model now contains 391 components and 0.090978 Jy ![Exited script file: muppet] wmap "J2359-0639_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.274 x 18.67 at -17.21 degrees (North through East) ! Clean map min=-0.0014005 max=0.076872 Jy/beam ! Writing clean map to FITS file: J2359-0639_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0768716 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000172016 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.671312 0.671312 1.34262 2.68525 5.3705 10.741 21.482 42.964 85.928 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.076 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.274 x 18.67 at -17.21 degrees (North through East) ! Clean map min=-0.0014005 max=0.076872 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2359-0639_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:08:54 2019