! Started logfile: J2359-0639_S_2017_09_26_pus_uvs.log on Sat May 11 13:09:29 2019 obs J2359-0639_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J2359-0639_S_2017_09_26_pus_uva.fits ! AN table 1: 198 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.686728 visibilities/baseline/integration-bin. ! Found source: J2359-0639 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 19580 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2359-0639_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 409 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 490 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 561 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1130 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.942110Jy sigma=0.007776 ! Fit after self-cal, rms=0.916387Jy sigma=0.007588 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.805 mas, bmaj=15.83 mas, bpa=-17.98 degrees ! Estimated noise=1511.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0634905 Jy ! Component: 100 - total flux cleaned = 0.0796422 Jy ! Total flux subtracted in 100 components = 0.0796422 Jy ! Clean residual min=-0.006284 max=0.007675 Jy/beam ! Clean residual mean=0.000002 rms=0.001688 Jy/beam ! Combined flux in latest and established models = 0.0796422 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0796422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087046Jy sigma=0.000661 ! Fit after self-cal, rms=0.086974Jy sigma=0.000661 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.295 mas, bmaj=18.49 mas, bpa=-17.6 degrees ! Estimated noise=752.894 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00968067 Jy ! Component: 100 - total flux cleaned = 0.0139828 Jy ! Component: 150 - total flux cleaned = 0.0163122 Jy ! Component: 200 - total flux cleaned = 0.0171783 Jy ! Total flux subtracted in 200 components = 0.0171783 Jy ! Clean residual min=-0.003534 max=0.002599 Jy/beam ! Clean residual mean=-0.000003 rms=0.000745 Jy/beam ! Combined flux in latest and established models = 0.0968205 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 45 components and 0.0968205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085851Jy sigma=0.000653 ! Fit after self-cal, rms=0.085843Jy sigma=0.000653 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 66 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.00* HN 0.99 KP 1.02 ! LA 1.04 MK 0.98 NL 0.93 OV 1.05 ! PT 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.04 KP 1.01 ! LA 1.01 MK 1.00 NL 1.03 OV 1.06 ! PT 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 1.00* HN 1.01 KP 1.00 ! LA 0.99 MK 1.05 NL 0.97 OV 0.96 ! PT 0.95 ! ! ! Correcting IF 4. ! A total of 93 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.77 HN 0.85 KP 1.00* ! LA 1.18 MK 1.20 NL 1.00* OV 0.73 ! PT 0.96 ! ! ! Fit before self-cal, rms=0.085843Jy sigma=0.000653 ! Fit after self-cal, rms=0.083192Jy sigma=0.000651 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.308 mas, bmaj=18.42 mas, bpa=-17.61 degrees ! Estimated noise=753.058 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000482093 Jy ! Component: 100 - total flux cleaned = 0.000397322 Jy ! Component: 150 - total flux cleaned = 0.000364061 Jy ! Component: 200 - total flux cleaned = 0.000335835 Jy ! Total flux subtracted in 200 components = 0.000335835 Jy ! Clean residual min=-0.002217 max=0.002722 Jy/beam ! Clean residual mean=0.000003 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.0971564 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 60 components and 0.0971564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083153Jy sigma=0.000650 ! Fit after self-cal, rms=0.083159Jy sigma=0.000650 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083159Jy sigma=0.000650 ! Fit after self-cal, rms=0.083110Jy sigma=0.000648 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.315 mas, bmaj=18.25 mas, bpa=-17.64 degrees ! Estimated noise=751.085 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0002897 Jy ! Component: 100 - total flux cleaned = -0.000291234 Jy ! Component: 150 - total flux cleaned = -0.000309682 Jy ! Component: 200 - total flux cleaned = -0.00034084 Jy ! Total flux subtracted in 200 components = -0.00034084 Jy ! Clean residual min=-0.001770 max=0.001807 Jy/beam ! Clean residual mean=-0.000001 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.0968155 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 77 components and 0.0968155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083097Jy sigma=0.000648 ! Fit after self-cal, rms=0.083174Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.84123e-05 Jy ! Component: 100 - total flux cleaned = -7.90252e-05 Jy ! Component: 150 - total flux cleaned = -0.000107732 Jy ! Component: 200 - total flux cleaned = -0.000121573 Jy ! Total flux subtracted in 200 components = -0.000121573 Jy ! Clean residual min=-0.001733 max=0.001781 Jy/beam ! Clean residual mean=-0.000001 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.096694 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 88 components and 0.096694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083168Jy sigma=0.000648 ! Fit after self-cal, rms=0.083170Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083170Jy sigma=0.000648 ! Fit after self-cal, rms=0.084229Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.317 mas, bmaj=18.23 mas, bpa=-17.61 degrees ! Estimated noise=752.448 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.09678e-05 Jy ! Component: 100 - total flux cleaned = 3.02237e-05 Jy ! Component: 150 - total flux cleaned = 3.02567e-05 Jy ! Component: 200 - total flux cleaned = 2.59701e-06 Jy ! Total flux subtracted in 200 components = 2.59701e-06 Jy ! Clean residual min=-0.001735 max=0.001759 Jy/beam ! Clean residual mean=-0.000001 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.0966966 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 97 components and 0.0966966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084220Jy sigma=0.000648 ! Fit after self-cal, rms=0.084249Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.32425e-05 Jy ! Component: 100 - total flux cleaned = -3.06472e-06 Jy ! Component: 150 - total flux cleaned = -1.50298e-05 Jy ! Component: 200 - total flux cleaned = -1.49667e-05 Jy ! Total flux subtracted in 200 components = -1.49667e-05 Jy ! Clean residual min=-0.001713 max=0.001758 Jy/beam ! Clean residual mean=-0.000001 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.0966816 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 98 components and 0.0966816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084244Jy sigma=0.000648 ! Fit after self-cal, rms=0.084246Jy sigma=0.000648 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084246Jy sigma=0.000648 ! Fit after self-cal, rms=0.084559Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.271 mas, bmaj=20.72 mas, bpa=-10.42 degrees ! Estimated noise=904.744 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000110212 Jy ! Component: 100 - total flux cleaned = 6.96038e-05 Jy ! Component: 150 - total flux cleaned = 0.000106298 Jy ! Component: 200 - total flux cleaned = 0.000122258 Jy ! Total flux subtracted in 200 components = 0.000122258 Jy ! Clean residual min=-0.001479 max=0.002066 Jy/beam ! Clean residual mean=-0.000001 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.0968039 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 107 components and 0.0968039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084561Jy sigma=0.000647 ! Fit after self-cal, rms=0.084575Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.84348e-05 Jy ! Component: 100 - total flux cleaned = -4.1455e-05 Jy ! Component: 150 - total flux cleaned = -1.19233e-05 Jy ! Component: 200 - total flux cleaned = 1.11689e-06 Jy ! Total flux subtracted in 200 components = 1.11689e-06 Jy ! Clean residual min=-0.001471 max=0.002083 Jy/beam ! Clean residual mean=-0.000001 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.096805 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 109 components and 0.096805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084577Jy sigma=0.000647 ! Fit after self-cal, rms=0.084578Jy sigma=0.000647 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.319 mas, bmaj=18.22 mas, bpa=-17.59 degrees ! Estimated noise=754.04 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.319 x 18.22 at -17.59 degrees (North through East) ! Clean map min=-0.0019566 max=0.085771 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.808 mas, bmaj=16.2 mas, bpa=-17.76 degrees ! Estimated noise=1523.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0637907 Jy ! Component: 100 - total flux cleaned = 0.0806389 Jy ! Component: 150 - total flux cleaned = 0.088717 Jy ! Component: 200 - total flux cleaned = 0.0912277 Jy ! Total flux subtracted in 200 components = 0.0912277 Jy ! Clean residual min=-0.003958 max=0.003676 Jy/beam ! Clean residual mean=-0.000000 rms=0.000997 Jy/beam ! Combined flux in latest and established models = 0.0912277 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0912277 Jy ! Inverting map and beam ! Estimated beam: bmin=3.319 mas, bmaj=18.22 mas, bpa=-17.59 degrees ! Estimated noise=754.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00321281 Jy ! Component: 100 - total flux cleaned = 0.00457615 Jy ! Component: 150 - total flux cleaned = 0.00498849 Jy ! Component: 200 - total flux cleaned = 0.0050652 Jy ! Total flux subtracted in 200 components = 0.0050652 Jy ! Clean residual min=-0.001832 max=0.001753 Jy/beam ! Clean residual mean=-0.000000 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.0962929 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 36 components and 0.0962929 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.271 mas, bmaj=20.72 mas, bpa=-10.42 degrees ! Estimated noise=904.744 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000706174 Jy ! Component: 100 - total flux cleaned = 0.000706198 Jy ! Component: 150 - total flux cleaned = 0.000705999 Jy ! Component: 200 - total flux cleaned = 0.000706858 Jy ! Total flux subtracted in 200 components = 0.000706858 Jy ! Clean residual min=-0.001563 max=0.002096 Jy/beam ! Clean residual mean=-0.000001 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.0969998 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.45528e-06 Jy ! Component: 100 - total flux cleaned = 2.595e-06 Jy ! Component: 150 - total flux cleaned = -1.49583e-05 Jy ! Component: 200 - total flux cleaned = -6.37561e-05 Jy ! Total flux subtracted in 200 components = -6.37561e-05 Jy ! Clean residual min=-0.001550 max=0.002079 Jy/beam ! Clean residual mean=-0.000001 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.096936 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 58 components and 0.096936 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.319 mas, bmaj=18.22 mas, bpa=-17.59 degrees ! Estimated noise=754.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000286131 Jy ! Component: 100 - total flux cleaned = -0.000313822 Jy ! Component: 150 - total flux cleaned = -0.000382858 Jy ! Component: 200 - total flux cleaned = -0.000422106 Jy ! Total flux subtracted in 200 components = -0.000422106 Jy ! Clean residual min=-0.001728 max=0.001694 Jy/beam ! Clean residual mean=-0.000001 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.0965139 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 70 components and 0.0965139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084578Jy sigma=0.000647 ! Fit after self-cal, rms=0.084575Jy sigma=0.000647 wmodel J2359-0639_S_2017_09_26_pus_map.mod ! Writing 70 model components to file: J2359-0639_S_2017_09_26_pus_map.mod wobs J2359-0639_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J2359-0639_S_2017_09_26_pus_uvs.fits wwins J2359-0639_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J2359-0639_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -3.49174e-05 Jy ! Component: 100 - total flux cleaned = 7.80096e-05 Jy ! Component: 150 - total flux cleaned = 0.000105089 Jy ! Component: 200 - total flux cleaned = 0.000157208 Jy ! Component: 250 - total flux cleaned = 0.000207152 Jy ! Component: 300 - total flux cleaned = 0.000110513 Jy ! Component: 350 - total flux cleaned = 6.38939e-05 Jy ! Component: 400 - total flux cleaned = -4.20591e-06 Jy ! Component: 450 - total flux cleaned = -4.84014e-05 Jy ! Component: 500 - total flux cleaned = -7.08223e-05 Jy ! Component: 550 - total flux cleaned = -0.000220309 Jy ! Component: 600 - total flux cleaned = -0.000262521 Jy ! Component: 650 - total flux cleaned = -0.000364673 Jy ! Component: 700 - total flux cleaned = -0.000383906 Jy ! Component: 750 - total flux cleaned = -0.000442747 Jy ! Component: 800 - total flux cleaned = -0.000404111 Jy ! Component: 850 - total flux cleaned = -0.000518053 Jy ! Component: 900 - total flux cleaned = -0.000555192 Jy ! Component: 950 - total flux cleaned = -0.00061001 Jy ! Component: 1000 - total flux cleaned = -0.000699925 Jy ! Component: 1050 - total flux cleaned = -0.000770282 Jy ! Component: 1100 - total flux cleaned = -0.000839743 Jy ! Component: 1150 - total flux cleaned = -0.000924861 Jy ! Component: 1200 - total flux cleaned = -0.000958518 Jy ! Component: 1250 - total flux cleaned = -0.000975184 Jy ! Component: 1300 - total flux cleaned = -0.0010734 Jy ! Component: 1350 - total flux cleaned = -0.00113756 Jy ! Component: 1400 - total flux cleaned = -0.00112179 Jy ! Component: 1450 - total flux cleaned = -0.0012157 Jy ! Component: 1500 - total flux cleaned = -0.0012928 Jy ! Component: 1550 - total flux cleaned = -0.00136874 Jy ! Component: 1600 - total flux cleaned = -0.00133894 Jy ! Component: 1650 - total flux cleaned = -0.00142748 Jy ! Component: 1700 - total flux cleaned = -0.00144184 Jy ! Component: 1750 - total flux cleaned = -0.00149949 Jy ! Component: 1800 - total flux cleaned = -0.00155604 Jy ! Component: 1850 - total flux cleaned = -0.00159803 Jy ! Component: 1900 - total flux cleaned = -0.00161185 Jy ! Component: 1950 - total flux cleaned = -0.0016803 Jy ! Component: 2000 - total flux cleaned = -0.00167986 Jy ! Component: 2050 - total flux cleaned = -0.00167962 Jy ! Component: 2100 - total flux cleaned = -0.00167966 Jy ! Component: 2150 - total flux cleaned = -0.00165351 Jy ! Component: 2200 - total flux cleaned = -0.0016796 Jy ! Component: 2250 - total flux cleaned = -0.00167944 Jy ! Component: 2300 - total flux cleaned = -0.00165412 Jy ! Component: 2350 - total flux cleaned = -0.00166661 Jy ! Component: 2400 - total flux cleaned = -0.00167889 Jy ! Component: 2450 - total flux cleaned = -0.00166662 Jy ! Component: 2500 - total flux cleaned = -0.00166673 Jy ! Component: 2550 - total flux cleaned = -0.00166673 Jy ! Component: 2600 - total flux cleaned = -0.00170248 Jy ! Component: 2650 - total flux cleaned = -0.00170241 Jy ! Component: 2700 - total flux cleaned = -0.00172585 Jy ! Component: 2750 - total flux cleaned = -0.00174905 Jy ! Component: 2800 - total flux cleaned = -0.0017721 Jy ! Component: 2850 - total flux cleaned = -0.00179497 Jy ! Component: 2900 - total flux cleaned = -0.00180649 Jy ! Component: 2950 - total flux cleaned = -0.0018179 Jy ! Component: 3000 - total flux cleaned = -0.00187434 Jy ! Component: 3050 - total flux cleaned = -0.0019192 Jy ! Component: 3100 - total flux cleaned = -0.00194157 Jy ! Component: 3150 - total flux cleaned = -0.00197494 Jy ! Component: 3200 - total flux cleaned = -0.00204092 Jy ! Component: 3250 - total flux cleaned = -0.00208456 Jy ! Component: 3300 - total flux cleaned = -0.00208452 Jy ! Component: 3350 - total flux cleaned = -0.00211698 Jy ! Component: 3400 - total flux cleaned = -0.00214934 Jy ! Component: 3450 - total flux cleaned = -0.00222429 Jy ! Component: 3500 - total flux cleaned = -0.00223491 Jy ! Component: 3550 - total flux cleaned = -0.0022455 Jy ! Component: 3600 - total flux cleaned = -0.00225604 Jy ! Component: 3650 - total flux cleaned = -0.00230864 Jy ! Component: 3700 - total flux cleaned = -0.00230863 Jy ! Component: 3750 - total flux cleaned = -0.00236087 Jy ! Component: 3800 - total flux cleaned = -0.00239205 Jy ! Component: 3850 - total flux cleaned = -0.00241272 Jy ! Component: 3900 - total flux cleaned = -0.0024334 Jy ! Component: 3950 - total flux cleaned = -0.00246429 Jy ! Component: 4000 - total flux cleaned = -0.00246433 Jy ! Component: 4050 - total flux cleaned = -0.00246436 Jy ! Total flux subtracted in 4096 components = -0.00250519 Jy ! Clean residual min=-0.000570 max=0.000572 Jy/beam ! Clean residual mean=-0.000001 rms=0.000190 Jy/beam ! Combined flux in latest and established models = 0.0940087 Jy keep ! Adding 270 model components to the UV plane model. ! The established model now contains 340 components and 0.0940087 Jy ![Exited script file: muppet] wmap "J2359-0639_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.319 x 18.22 at -17.59 degrees (North through East) ! Clean map min=-0.0018369 max=0.085573 Jy/beam ! Writing clean map to FITS file: J2359-0639_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0855726 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00018762 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.657758 0.657758 1.31552 2.63103 5.26207 10.5241 21.0483 42.0965 84.1931 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.085 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.319 x 18.22 at -17.59 degrees (North through East) ! Clean map min=-0.0018369 max=0.085573 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2359-0639_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:09:35 2019