! Started logfile: J2359+3850_S_2017_10_09_pus_uvs.log on Sun May 12 13:23:27 2019 obs J2359+3850_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J2359+3850_S_2017_10_09_pus_uva.fits ! AN table 1: 26 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.524573 visibilities/baseline/integration-bin. ! Found source: J2359+3850 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 1964 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2359+3850_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 161 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.622441Jy sigma=0.005725 ! Fit after self-cal, rms=0.614122Jy sigma=0.005668 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.95 mas, bmaj=7.485 mas, bpa=11.27 degrees ! Estimated noise=2392.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.295316 Jy ! Component: 100 - total flux cleaned = 0.360014 Jy ! Total flux subtracted in 100 components = 0.360014 Jy ! Clean residual min=-0.013739 max=0.019792 Jy/beam ! Clean residual mean=-0.000094 rms=0.004466 Jy/beam ! Combined flux in latest and established models = 0.360014 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.360014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112785Jy sigma=0.000867 ! Fit after self-cal, rms=0.112785Jy sigma=0.000867 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.66 mas, bmaj=7.819 mas, bpa=9.266 degrees ! Estimated noise=2104.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0269472 Jy ! Component: 100 - total flux cleaned = 0.0400503 Jy ! Component: 150 - total flux cleaned = 0.0479352 Jy ! Component: 200 - total flux cleaned = 0.0527136 Jy ! Total flux subtracted in 200 components = 0.0527136 Jy ! Clean residual min=-0.015214 max=0.013274 Jy/beam ! Clean residual mean=-0.000040 rms=0.003760 Jy/beam ! Combined flux in latest and established models = 0.412727 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 30 components and 0.412727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104266Jy sigma=0.000817 ! Fit after self-cal, rms=0.104254Jy sigma=0.000817 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.97 KP 1.08 ! LA 1.02 MK 1.00 NL 0.98 OV 1.00* ! PT 1.04 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.03 HN 1.02 KP 1.03 ! LA 0.99 MK 1.01 NL 1.00* OV 1.00* ! PT 0.99 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.03 HN 1.00 KP 0.90 ! LA 0.79 MK 1.04 NL 1.31 OV 1.00* ! PT 0.99 ! ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.15 HN 0.96 KP 1.00* ! LA 1.00* MK 1.11 NL 1.00* OV 1.00* ! PT 1.04 ! ! ! Fit before self-cal, rms=0.104254Jy sigma=0.000817 ! Fit after self-cal, rms=0.090524Jy sigma=0.000722 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.646 mas, bmaj=7.925 mas, bpa=9.505 degrees ! Estimated noise=2127.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00297367 Jy ! Component: 100 - total flux cleaned = 0.00404251 Jy ! Component: 150 - total flux cleaned = 0.00433118 Jy ! Component: 200 - total flux cleaned = 0.00438324 Jy ! Total flux subtracted in 200 components = 0.00438324 Jy ! Clean residual min=-0.009061 max=0.010348 Jy/beam ! Clean residual mean=0.000018 rms=0.002772 Jy/beam ! Combined flux in latest and established models = 0.41711 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 45 components and 0.41711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090346Jy sigma=0.000721 ! Fit after self-cal, rms=0.090418Jy sigma=0.000721 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090418Jy sigma=0.000721 ! Fit after self-cal, rms=0.080011Jy sigma=0.000668 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.646 mas, bmaj=7.938 mas, bpa=9.554 degrees ! Estimated noise=2127.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144994 Jy ! Component: 100 - total flux cleaned = 0.00144147 Jy ! Component: 150 - total flux cleaned = 0.00138984 Jy ! Component: 200 - total flux cleaned = 0.00142781 Jy ! Total flux subtracted in 200 components = 0.00142781 Jy ! Clean residual min=-0.004697 max=0.005186 Jy/beam ! Clean residual mean=-0.000005 rms=0.001245 Jy/beam ! Combined flux in latest and established models = 0.418538 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 56 components and 0.418538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079910Jy sigma=0.000667 ! Fit after self-cal, rms=0.079934Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.6234e-06 Jy ! Component: 100 - total flux cleaned = 5.72208e-05 Jy ! Component: 150 - total flux cleaned = 0.000115533 Jy ! Component: 200 - total flux cleaned = 0.00014208 Jy ! Total flux subtracted in 200 components = 0.00014208 Jy ! Clean residual min=-0.004718 max=0.005166 Jy/beam ! Clean residual mean=-0.000004 rms=0.001238 Jy/beam ! Combined flux in latest and established models = 0.41868 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 62 components and 0.41868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079904Jy sigma=0.000667 ! Fit after self-cal, rms=0.079904Jy sigma=0.000667 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079904Jy sigma=0.000667 ! Fit after self-cal, rms=0.079880Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.655 mas, bmaj=7.932 mas, bpa=9.577 degrees ! Estimated noise=2126.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000656473 Jy ! Component: 100 - total flux cleaned = -0.000542213 Jy ! Component: 150 - total flux cleaned = -0.0004257 Jy ! Component: 200 - total flux cleaned = -0.000372515 Jy ! Total flux subtracted in 200 components = -0.000372515 Jy ! Clean residual min=-0.004732 max=0.005049 Jy/beam ! Clean residual mean=-0.000005 rms=0.001215 Jy/beam ! Combined flux in latest and established models = 0.418308 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 65 components and 0.418308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079839Jy sigma=0.000667 ! Fit after self-cal, rms=0.079843Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.71731e-05 Jy ! Component: 100 - total flux cleaned = -1.16981e-05 Jy ! Component: 150 - total flux cleaned = 3.20534e-05 Jy ! Component: 200 - total flux cleaned = 7.14756e-05 Jy ! Total flux subtracted in 200 components = 7.14756e-05 Jy ! Clean residual min=-0.004793 max=0.005017 Jy/beam ! Clean residual mean=-0.000005 rms=0.001211 Jy/beam ! Combined flux in latest and established models = 0.418379 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 70 components and 0.418379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079825Jy sigma=0.000667 ! Fit after self-cal, rms=0.079827Jy sigma=0.000667 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079827Jy sigma=0.000667 ! Fit after self-cal, rms=0.079795Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.512 mas, bmaj=9.158 mas, bpa=10.45 degrees ! Estimated noise=2469.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.18429e-05 Jy ! Component: 100 - total flux cleaned = -0.000166934 Jy ! Component: 150 - total flux cleaned = -0.000211144 Jy ! Component: 200 - total flux cleaned = -0.000210254 Jy ! Total flux subtracted in 200 components = -0.000210254 Jy ! Clean residual min=-0.004741 max=0.004142 Jy/beam ! Clean residual mean=-0.000008 rms=0.001214 Jy/beam ! Combined flux in latest and established models = 0.418169 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 84 components and 0.418169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079790Jy sigma=0.000667 ! Fit after self-cal, rms=0.079791Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.19769e-05 Jy ! Component: 100 - total flux cleaned = 9.80049e-06 Jy ! Component: 150 - total flux cleaned = 3.09011e-05 Jy ! Component: 200 - total flux cleaned = 4.06504e-05 Jy ! Total flux subtracted in 200 components = 4.06504e-05 Jy ! Clean residual min=-0.004747 max=0.004148 Jy/beam ! Clean residual mean=-0.000008 rms=0.001210 Jy/beam ! Combined flux in latest and established models = 0.41821 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 88 components and 0.41821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079788Jy sigma=0.000667 ! Fit after self-cal, rms=0.079790Jy sigma=0.000667 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.664 mas, bmaj=7.929 mas, bpa=9.587 degrees ! Estimated noise=2125.37 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.664 x 7.929 at 9.587 degrees (North through East) ! Clean map min=-0.0046772 max=0.38877 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.932 mas, bmaj=7.704 mas, bpa=11.62 degrees ! Estimated noise=2433.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.299458 Jy ! Component: 100 - total flux cleaned = 0.364925 Jy ! Component: 150 - total flux cleaned = 0.383148 Jy ! Component: 200 - total flux cleaned = 0.393279 Jy ! Total flux subtracted in 200 components = 0.393279 Jy ! Clean residual min=-0.006030 max=0.006784 Jy/beam ! Clean residual mean=-0.000034 rms=0.001675 Jy/beam ! Combined flux in latest and established models = 0.393279 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.393279 Jy ! Inverting map and beam ! Estimated beam: bmin=4.664 mas, bmaj=7.929 mas, bpa=9.587 degrees ! Estimated noise=2125.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, -51.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00910843 Jy ! Component: 100 - total flux cleaned = 0.014696 Jy ! Component: 150 - total flux cleaned = 0.0180308 Jy ! Component: 200 - total flux cleaned = 0.0197267 Jy ! Total flux subtracted in 200 components = 0.0197267 Jy ! Clean residual min=-0.004297 max=0.004706 Jy/beam ! Clean residual mean=-0.000019 rms=0.001216 Jy/beam ! Combined flux in latest and established models = 0.413006 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 58 components and 0.413006 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.512 mas, bmaj=9.158 mas, bpa=10.45 degrees ! Estimated noise=2469.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00303768 Jy ! Component: 100 - total flux cleaned = 0.00311598 Jy ! Component: 150 - total flux cleaned = 0.00325627 Jy ! Component: 200 - total flux cleaned = 0.00337833 Jy ! Total flux subtracted in 200 components = 0.00337833 Jy ! Clean residual min=-0.004493 max=0.003794 Jy/beam ! Clean residual mean=-0.000021 rms=0.001182 Jy/beam ! Combined flux in latest and established models = 0.416384 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109863 Jy ! Component: 100 - total flux cleaned = 0.000157586 Jy ! Component: 150 - total flux cleaned = 0.000203815 Jy ! Component: 200 - total flux cleaned = 0.000288867 Jy ! Total flux subtracted in 200 components = 0.000288867 Jy ! Clean residual min=-0.004205 max=0.003755 Jy/beam ! Clean residual mean=-0.000019 rms=0.001146 Jy/beam ! Combined flux in latest and established models = 0.416673 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 96 components and 0.416673 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.664 mas, bmaj=7.929 mas, bpa=9.587 degrees ! Estimated noise=2125.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000270457 Jy ! Component: 100 - total flux cleaned = 0.000271594 Jy ! Component: 150 - total flux cleaned = 0.000221059 Jy ! Component: 200 - total flux cleaned = 0.000173989 Jy ! Total flux subtracted in 200 components = 0.000173989 Jy ! Clean residual min=-0.004055 max=0.004421 Jy/beam ! Clean residual mean=-0.000009 rms=0.001092 Jy/beam ! Combined flux in latest and established models = 0.416847 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 115 components and 0.416847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079484Jy sigma=0.000664 ! Fit after self-cal, rms=0.079475Jy sigma=0.000664 wmodel J2359+3850_S_2017_10_09_pus_map.mod ! Writing 115 model components to file: J2359+3850_S_2017_10_09_pus_map.mod wobs J2359+3850_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J2359+3850_S_2017_10_09_pus_uvs.fits wwins J2359+3850_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J2359+3850_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011491 Jy ! Component: 100 - total flux cleaned = 0.00194209 Jy ! Component: 150 - total flux cleaned = 0.00267336 Jy ! Component: 200 - total flux cleaned = 0.00323878 Jy ! Component: 250 - total flux cleaned = 0.00353906 Jy ! Component: 300 - total flux cleaned = 0.0038263 Jy ! Component: 350 - total flux cleaned = 0.00415571 Jy ! Component: 400 - total flux cleaned = 0.00431418 Jy ! Component: 450 - total flux cleaned = 0.00441781 Jy ! Component: 500 - total flux cleaned = 0.0047156 Jy ! Component: 550 - total flux cleaned = 0.0049072 Jy ! Component: 600 - total flux cleaned = 0.00532364 Jy ! Component: 650 - total flux cleaned = 0.00545809 Jy ! Component: 700 - total flux cleaned = 0.00567745 Jy ! Component: 750 - total flux cleaned = 0.00589113 Jy ! Component: 800 - total flux cleaned = 0.00609937 Jy ! Component: 850 - total flux cleaned = 0.00622121 Jy ! Component: 900 - total flux cleaned = 0.00630039 Jy ! Component: 950 - total flux cleaned = 0.00630074 Jy ! Component: 1000 - total flux cleaned = 0.00656409 Jy ! Component: 1050 - total flux cleaned = 0.00656307 Jy ! Component: 1100 - total flux cleaned = 0.00663544 Jy ! Component: 1150 - total flux cleaned = 0.00660059 Jy ! Component: 1200 - total flux cleaned = 0.00667091 Jy ! Component: 1250 - total flux cleaned = 0.00680691 Jy ! Component: 1300 - total flux cleaned = 0.0069403 Jy ! Component: 1350 - total flux cleaned = 0.00707127 Jy ! Component: 1400 - total flux cleaned = 0.00707071 Jy ! Component: 1450 - total flux cleaned = 0.00716598 Jy ! Component: 1500 - total flux cleaned = 0.00732141 Jy ! Component: 1550 - total flux cleaned = 0.00747443 Jy ! Component: 1600 - total flux cleaned = 0.00765473 Jy ! Component: 1650 - total flux cleaned = 0.00783117 Jy ! Component: 1700 - total flux cleaned = 0.0078896 Jy ! Component: 1750 - total flux cleaned = 0.00794743 Jy ! Component: 1800 - total flux cleaned = 0.00800352 Jy ! Component: 1850 - total flux cleaned = 0.00800367 Jy ! Component: 1900 - total flux cleaned = 0.00808596 Jy ! Component: 1950 - total flux cleaned = 0.00813987 Jy ! Component: 2000 - total flux cleaned = 0.00824678 Jy ! Component: 2050 - total flux cleaned = 0.00827342 Jy ! Component: 2100 - total flux cleaned = 0.00850778 Jy ! Component: 2150 - total flux cleaned = 0.00845606 Jy ! Component: 2200 - total flux cleaned = 0.00858314 Jy ! Component: 2250 - total flux cleaned = 0.0087593 Jy ! Component: 2300 - total flux cleaned = 0.00885887 Jy ! Component: 2350 - total flux cleaned = 0.00895752 Jy ! Component: 2400 - total flux cleaned = 0.00912827 Jy ! Component: 2450 - total flux cleaned = 0.00924881 Jy ! Component: 2500 - total flux cleaned = 0.00939275 Jy ! Component: 2550 - total flux cleaned = 0.00958267 Jy ! Component: 2600 - total flux cleaned = 0.00972355 Jy ! Component: 2650 - total flux cleaned = 0.00988691 Jy ! Component: 2700 - total flux cleaned = 0.0100258 Jy ! Component: 2750 - total flux cleaned = 0.0102325 Jy ! Component: 2800 - total flux cleaned = 0.0103689 Jy ! Component: 2850 - total flux cleaned = 0.0105723 Jy ! Component: 2900 - total flux cleaned = 0.0108637 Jy ! Component: 2950 - total flux cleaned = 0.0109972 Jy ! Component: 3000 - total flux cleaned = 0.0111962 Jy ! Component: 3050 - total flux cleaned = 0.0114379 Jy ! Component: 3100 - total flux cleaned = 0.0116123 Jy ! Component: 3150 - total flux cleaned = 0.0118291 Jy ! Component: 3200 - total flux cleaned = 0.0120016 Jy ! Component: 3250 - total flux cleaned = 0.0122585 Jy ! Component: 3300 - total flux cleaned = 0.012429 Jy ! Component: 3350 - total flux cleaned = 0.0126196 Jy ! Component: 3400 - total flux cleaned = 0.0127671 Jy ! Component: 3450 - total flux cleaned = 0.0129767 Jy ! Component: 3500 - total flux cleaned = 0.0131226 Jy ! Component: 3550 - total flux cleaned = 0.0132472 Jy ! Component: 3600 - total flux cleaned = 0.0134331 Jy ! Component: 3650 - total flux cleaned = 0.0135974 Jy ! Component: 3700 - total flux cleaned = 0.0137612 Jy ! Component: 3750 - total flux cleaned = 0.0139646 Jy ! Component: 3800 - total flux cleaned = 0.0141267 Jy ! Component: 3850 - total flux cleaned = 0.0143486 Jy ! Component: 3900 - total flux cleaned = 0.0145092 Jy ! Component: 3950 - total flux cleaned = 0.0147093 Jy ! Component: 4000 - total flux cleaned = 0.0148489 Jy ! Component: 4050 - total flux cleaned = 0.0150475 Jy ! Total flux subtracted in 4096 components = 0.0152059 Jy ! Clean residual min=-0.001061 max=0.001037 Jy/beam ! Clean residual mean=-0.000002 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.432053 Jy keep ! Adding 257 model components to the UV plane model. ! The established model now contains 372 components and 0.432053 Jy ![Exited script file: muppet] wmap "J2359+3850_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.664 x 7.929 at 9.587 degrees (North through East) ! Clean map min=-0.0029784 max=0.3877 Jy/beam ! Writing clean map to FITS file: J2359+3850_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.387701 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000327965 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.253776 0.253776 0.507553 1.01511 2.03021 4.06042 8.12085 16.2417 32.4834 64.9668 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.387 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.664 x 7.929 at 9.587 degrees (North through East) ! Clean map min=-0.0029784 max=0.3877 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2359+3850_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:23:31 2019