! Started logfile: J2359+3850_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:27:20 2019 obs J2359+3850_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J2359+3850_S_2017_01_16_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.313889 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2359+3850 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 904 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2359+3850_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.662693Jy sigma=0.004804 ! Fit after self-cal, rms=0.648959Jy sigma=0.004766 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.542 mas, bmaj=8.782 mas, bpa=20.94 degrees ! Estimated noise=4029.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.293257 Jy ! Component: 100 - total flux cleaned = 0.359588 Jy ! Total flux subtracted in 100 components = 0.359588 Jy ! Clean residual min=-0.022181 max=0.032305 Jy/beam ! Clean residual mean=-0.000030 rms=0.007235 Jy/beam ! Combined flux in latest and established models = 0.359588 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.359588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169352Jy sigma=0.000809 ! Fit after self-cal, rms=0.169249Jy sigma=0.000809 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.077 mas, bmaj=8.957 mas, bpa=20.72 degrees ! Estimated noise=3453.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0269277 Jy ! Component: 100 - total flux cleaned = 0.0403897 Jy ! Component: 150 - total flux cleaned = 0.047965 Jy ! Component: 200 - total flux cleaned = 0.0499156 Jy ! Total flux subtracted in 200 components = 0.0499156 Jy ! Clean residual min=-0.020648 max=0.025852 Jy/beam ! Clean residual mean=-0.000083 rms=0.006306 Jy/beam ! Combined flux in latest and established models = 0.409504 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 19 components and 0.409504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166340Jy sigma=0.000741 ! Fit after self-cal, rms=0.166345Jy sigma=0.000741 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 1.00* KP 0.97 ! LA 0.99 MK 1.00* NL 0.88 OV 1.00* ! PT 0.99 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.00* KP 0.96 ! LA 0.95 MK 1.00* NL 1.01 OV 1.00* ! PT 1.01 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* HN 1.00* KP 0.98 ! LA 1.00 MK 1.00* NL 0.98 OV 1.00* ! PT 0.97 SC 1.05 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 1.00* KP 1.00* ! LA 1.08 MK 1.00* NL 1.00* OV 1.00* ! PT 0.96 SC 0.98 ! ! ! Fit before self-cal, rms=0.166345Jy sigma=0.000741 ! Fit after self-cal, rms=0.162912Jy sigma=0.000714 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.124 mas, bmaj=8.95 mas, bpa=20.52 degrees ! Estimated noise=3383.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0081984 Jy ! Component: 100 - total flux cleaned = -0.00972172 Jy ! Component: 150 - total flux cleaned = -0.00996363 Jy ! Component: 200 - total flux cleaned = -0.00988123 Jy ! Total flux subtracted in 200 components = -0.00988123 Jy ! Clean residual min=-0.020944 max=0.024474 Jy/beam ! Clean residual mean=-0.000073 rms=0.005814 Jy/beam ! Combined flux in latest and established models = 0.399623 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 37 components and 0.399623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161903Jy sigma=0.000713 ! Fit after self-cal, rms=0.161960Jy sigma=0.000713 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161960Jy sigma=0.000713 ! Fit after self-cal, rms=0.151623Jy sigma=0.000622 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.13 mas, bmaj=8.91 mas, bpa=20.47 degrees ! Estimated noise=3389.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00324592 Jy ! Component: 100 - total flux cleaned = 0.00374051 Jy ! Component: 150 - total flux cleaned = 0.00414388 Jy ! Component: 200 - total flux cleaned = 0.00438172 Jy ! Total flux subtracted in 200 components = 0.00438172 Jy ! Clean residual min=-0.006676 max=0.006333 Jy/beam ! Clean residual mean=-0.000003 rms=0.001635 Jy/beam ! Combined flux in latest and established models = 0.404004 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.404004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151439Jy sigma=0.000620 ! Fit after self-cal, rms=0.152386Jy sigma=0.000620 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000207676 Jy ! Component: 100 - total flux cleaned = 0.000366998 Jy ! Component: 150 - total flux cleaned = 0.000394875 Jy ! Component: 200 - total flux cleaned = 0.00044538 Jy ! Total flux subtracted in 200 components = 0.00044538 Jy ! Clean residual min=-0.006518 max=0.006193 Jy/beam ! Clean residual mean=-0.000004 rms=0.001632 Jy/beam ! Combined flux in latest and established models = 0.40445 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 55 components and 0.40445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152368Jy sigma=0.000620 ! Fit after self-cal, rms=0.152385Jy sigma=0.000620 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152385Jy sigma=0.000620 ! Fit after self-cal, rms=0.151479Jy sigma=0.000619 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.131 mas, bmaj=8.898 mas, bpa=20.38 degrees ! Estimated noise=3386.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.15433e-06 Jy ! Component: 100 - total flux cleaned = 0.000170116 Jy ! Component: 150 - total flux cleaned = 0.000418778 Jy ! Component: 200 - total flux cleaned = 0.000639436 Jy ! Total flux subtracted in 200 components = 0.000639436 Jy ! Clean residual min=-0.006252 max=0.005877 Jy/beam ! Clean residual mean=0.000000 rms=0.001573 Jy/beam ! Combined flux in latest and established models = 0.405089 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 58 components and 0.405089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151406Jy sigma=0.000619 ! Fit after self-cal, rms=0.151392Jy sigma=0.000619 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000134827 Jy ! Component: 100 - total flux cleaned = 0.000232966 Jy ! Component: 150 - total flux cleaned = 0.000251081 Jy ! Component: 200 - total flux cleaned = 0.000302336 Jy ! Total flux subtracted in 200 components = 0.000302336 Jy ! Clean residual min=-0.006180 max=0.005859 Jy/beam ! Clean residual mean=-0.000001 rms=0.001570 Jy/beam ! Combined flux in latest and established models = 0.405392 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 63 components and 0.405392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151385Jy sigma=0.000619 ! Fit after self-cal, rms=0.151391Jy sigma=0.000619 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151391Jy sigma=0.000619 ! Fit after self-cal, rms=0.151098Jy sigma=0.000619 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.204 mas, bmaj=9.656 mas, bpa=6.402 degrees ! Estimated noise=3831.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000469635 Jy ! Component: 100 - total flux cleaned = -0.000493932 Jy ! Component: 150 - total flux cleaned = -0.000516353 Jy ! Component: 200 - total flux cleaned = -0.000515184 Jy ! Total flux subtracted in 200 components = -0.000515184 Jy ! Clean residual min=-0.006922 max=0.006399 Jy/beam ! Clean residual mean=-0.000000 rms=0.001877 Jy/beam ! Combined flux in latest and established models = 0.404876 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 66 components and 0.404876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151052Jy sigma=0.000619 ! Fit after self-cal, rms=0.151052Jy sigma=0.000619 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.64961e-05 Jy ! Component: 100 - total flux cleaned = -6.99197e-06 Jy ! Component: 150 - total flux cleaned = -7.23255e-06 Jy ! Component: 200 - total flux cleaned = -6.94593e-06 Jy ! Total flux subtracted in 200 components = -6.94593e-06 Jy ! Clean residual min=-0.006857 max=0.006407 Jy/beam ! Clean residual mean=-0.000000 rms=0.001872 Jy/beam ! Combined flux in latest and established models = 0.404869 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 71 components and 0.404869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151036Jy sigma=0.000619 ! Fit after self-cal, rms=0.151049Jy sigma=0.000619 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.131 mas, bmaj=8.896 mas, bpa=20.33 degrees ! Estimated noise=3384.98 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.131 x 8.896 at 20.33 degrees (North through East) ! Clean map min=-0.0058854 max=0.37146 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.569 mas, bmaj=8.635 mas, bpa=20.41 degrees ! Estimated noise=4022.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.291439 Jy ! Component: 100 - total flux cleaned = 0.355243 Jy ! Component: 150 - total flux cleaned = 0.377807 Jy ! Component: 200 - total flux cleaned = 0.39106 Jy ! Total flux subtracted in 200 components = 0.39106 Jy ! Clean residual min=-0.010029 max=0.010880 Jy/beam ! Clean residual mean=0.000029 rms=0.002488 Jy/beam ! Combined flux in latest and established models = 0.39106 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.39106 Jy ! Inverting map and beam ! Estimated beam: bmin=4.131 mas, bmaj=8.896 mas, bpa=20.33 degrees ! Estimated noise=3384.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00630483 Jy ! Component: 100 - total flux cleaned = 0.00793079 Jy ! Component: 150 - total flux cleaned = 0.00933355 Jy ! Component: 200 - total flux cleaned = 0.010208 Jy ! Total flux subtracted in 200 components = 0.010208 Jy ! Clean residual min=-0.007075 max=0.006181 Jy/beam ! Clean residual mean=0.000008 rms=0.001713 Jy/beam ! Combined flux in latest and established models = 0.401268 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 34 components and 0.401268 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.204 mas, bmaj=9.656 mas, bpa=6.402 degrees ! Estimated noise=3831.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189257 Jy ! Component: 100 - total flux cleaned = 0.00203583 Jy ! Component: 150 - total flux cleaned = 0.00206626 Jy ! Component: 200 - total flux cleaned = 0.00211934 Jy ! Total flux subtracted in 200 components = 0.00211934 Jy ! Clean residual min=-0.006956 max=0.006476 Jy/beam ! Clean residual mean=0.000005 rms=0.001911 Jy/beam ! Combined flux in latest and established models = 0.403387 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.69979e-05 Jy ! Component: 100 - total flux cleaned = 6.78573e-05 Jy ! Component: 150 - total flux cleaned = 0.000107904 Jy ! Component: 200 - total flux cleaned = 0.000126697 Jy ! Total flux subtracted in 200 components = 0.000126697 Jy ! Clean residual min=-0.006898 max=0.006527 Jy/beam ! Clean residual mean=0.000004 rms=0.001906 Jy/beam ! Combined flux in latest and established models = 0.403514 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 49 components and 0.403514 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.131 mas, bmaj=8.896 mas, bpa=20.33 degrees ! Estimated noise=3384.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000139284 Jy ! Component: 100 - total flux cleaned = 0.000381723 Jy ! Component: 150 - total flux cleaned = 0.000387675 Jy ! Component: 200 - total flux cleaned = 0.000388805 Jy ! Total flux subtracted in 200 components = 0.000388805 Jy ! Clean residual min=-0.006263 max=0.005963 Jy/beam ! Clean residual mean=0.000002 rms=0.001609 Jy/beam ! Combined flux in latest and established models = 0.403903 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 61 components and 0.403903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151043Jy sigma=0.000620 ! Fit after self-cal, rms=0.151002Jy sigma=0.000620 wmodel J2359+3850_S_2017_01_16_pus_map.mod ! Writing 61 model components to file: J2359+3850_S_2017_01_16_pus_map.mod wobs J2359+3850_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J2359+3850_S_2017_01_16_pus_uvs.fits wwins J2359+3850_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J2359+3850_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00176224 Jy ! Component: 100 - total flux cleaned = -0.00216838 Jy ! Component: 150 - total flux cleaned = -0.0022523 Jy ! Component: 200 - total flux cleaned = -0.00224924 Jy ! Component: 250 - total flux cleaned = -0.00258088 Jy ! Component: 300 - total flux cleaned = -0.00281498 Jy ! Component: 350 - total flux cleaned = -0.00296543 Jy ! Component: 400 - total flux cleaned = -0.00303601 Jy ! Component: 450 - total flux cleaned = -0.00303431 Jy ! Component: 500 - total flux cleaned = -0.00310149 Jy ! Component: 550 - total flux cleaned = -0.00316708 Jy ! Component: 600 - total flux cleaned = -0.00347228 Jy ! Component: 650 - total flux cleaned = -0.00376622 Jy ! Component: 700 - total flux cleaned = -0.00382315 Jy ! Component: 750 - total flux cleaned = -0.00376958 Jy ! Component: 800 - total flux cleaned = -0.00403724 Jy ! Component: 850 - total flux cleaned = -0.00398359 Jy ! Component: 900 - total flux cleaned = -0.00393213 Jy ! Component: 950 - total flux cleaned = -0.00388204 Jy ! Component: 1000 - total flux cleaned = -0.00388241 Jy ! Component: 1050 - total flux cleaned = -0.00402415 Jy ! Component: 1100 - total flux cleaned = -0.00402395 Jy ! Component: 1150 - total flux cleaned = -0.00411509 Jy ! Component: 1200 - total flux cleaned = -0.00407076 Jy ! Component: 1250 - total flux cleaned = -0.0042883 Jy ! Component: 1300 - total flux cleaned = -0.00437341 Jy ! Component: 1350 - total flux cleaned = -0.00441479 Jy ! Component: 1400 - total flux cleaned = -0.00453944 Jy ! Component: 1450 - total flux cleaned = -0.00470209 Jy ! Component: 1500 - total flux cleaned = -0.00478241 Jy ! Component: 1550 - total flux cleaned = -0.00494113 Jy ! Component: 1600 - total flux cleaned = -0.00521286 Jy ! Component: 1650 - total flux cleaned = -0.00536634 Jy ! Component: 1700 - total flux cleaned = -0.00547942 Jy ! Component: 1750 - total flux cleaned = -0.0056285 Jy ! Component: 1800 - total flux cleaned = -0.00570245 Jy ! Component: 1850 - total flux cleaned = -0.00581176 Jy ! Component: 1900 - total flux cleaned = -0.00588354 Jy ! Component: 1950 - total flux cleaned = -0.00591932 Jy ! Component: 2000 - total flux cleaned = -0.00588407 Jy ! Component: 2050 - total flux cleaned = -0.00581422 Jy ! Component: 2100 - total flux cleaned = -0.00584907 Jy ! Component: 2150 - total flux cleaned = -0.00574523 Jy ! Component: 2200 - total flux cleaned = -0.0057797 Jy ! Component: 2250 - total flux cleaned = -0.0058138 Jy ! Component: 2300 - total flux cleaned = -0.00584795 Jy ! Component: 2350 - total flux cleaned = -0.00591606 Jy ! Component: 2400 - total flux cleaned = -0.00598379 Jy ! Component: 2450 - total flux cleaned = -0.00598375 Jy ! Component: 2500 - total flux cleaned = -0.00605112 Jy ! Component: 2550 - total flux cleaned = -0.00611803 Jy ! Component: 2600 - total flux cleaned = -0.00615133 Jy ! Component: 2650 - total flux cleaned = -0.00621796 Jy ! Component: 2700 - total flux cleaned = -0.00631794 Jy ! Component: 2750 - total flux cleaned = -0.00641757 Jy ! Component: 2800 - total flux cleaned = -0.00641743 Jy ! Component: 2850 - total flux cleaned = -0.00648353 Jy ! Component: 2900 - total flux cleaned = -0.00658265 Jy ! Component: 2950 - total flux cleaned = -0.00661569 Jy ! Component: 3000 - total flux cleaned = -0.00674745 Jy ! Component: 3050 - total flux cleaned = -0.00684612 Jy ! Component: 3100 - total flux cleaned = -0.00694477 Jy ! Component: 3150 - total flux cleaned = -0.00697751 Jy ! Component: 3200 - total flux cleaned = -0.00704304 Jy ! Component: 3250 - total flux cleaned = -0.00697763 Jy ! Component: 3300 - total flux cleaned = -0.00704317 Jy ! Component: 3350 - total flux cleaned = -0.00704318 Jy ! Component: 3400 - total flux cleaned = -0.00707599 Jy ! Component: 3450 - total flux cleaned = -0.00710892 Jy ! Component: 3500 - total flux cleaned = -0.00714143 Jy ! Component: 3550 - total flux cleaned = -0.00717424 Jy ! Component: 3600 - total flux cleaned = -0.00727274 Jy ! Component: 3650 - total flux cleaned = -0.00733844 Jy ! Component: 3700 - total flux cleaned = -0.00727262 Jy ! Component: 3750 - total flux cleaned = -0.00733829 Jy ! Component: 3800 - total flux cleaned = -0.00740422 Jy ! Component: 3850 - total flux cleaned = -0.00743732 Jy ! Component: 3900 - total flux cleaned = -0.00740426 Jy ! Component: 3950 - total flux cleaned = -0.00750377 Jy ! Component: 4000 - total flux cleaned = -0.00757038 Jy ! Component: 4050 - total flux cleaned = -0.00767067 Jy ! Total flux subtracted in 4096 components = -0.00773775 Jy ! Clean residual min=-0.001760 max=0.001983 Jy/beam ! Clean residual mean=0.000002 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.396165 Jy keep ! Adding 238 model components to the UV plane model. ! The established model now contains 299 components and 0.396165 Jy ![Exited script file: muppet] wmap "J2359+3850_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.131 x 8.896 at 20.33 degrees (North through East) ! Clean map min=-0.0047976 max=0.36948 Jy/beam ! Writing clean map to FITS file: J2359+3850_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.36948 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000643231 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.522273 0.522273 1.04455 2.08909 4.17819 8.35637 16.7127 33.4255 66.851 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.369 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.131 x 8.896 at 20.33 degrees (North through East) ! Clean map min=-0.0047976 max=0.36948 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2359+3850_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:27:25 2019