! Started logfile: J2358-1020_S_2017_09_26_pus_uvs.log on Sat May 11 13:09:23 2019 obs J2358-1020_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J2358-1020_S_2017_09_26_pus_uva.fits ! AN table 1: 26 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.694444 visibilities/baseline/integration-bin. ! Found source: J2358-1020 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 2600 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2358-1020_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 119 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.345619Jy sigma=0.002631 ! Fit after self-cal, rms=0.316433Jy sigma=0.002391 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.181 mas, bmaj=16.07 mas, bpa=-14.02 degrees ! Estimated noise=2373.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.616747 Jy ! Component: 100 - total flux cleaned = 0.756459 Jy ! Total flux subtracted in 100 components = 0.756459 Jy ! Clean residual min=-0.047154 max=0.082275 Jy/beam ! Clean residual mean=-0.000135 rms=0.016493 Jy/beam ! Combined flux in latest and established models = 0.756459 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.756459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239640Jy sigma=0.001800 ! Fit after self-cal, rms=0.239634Jy sigma=0.001800 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.95 mas, bmaj=16.5 mas, bpa=-13.39 degrees ! Estimated noise=1903.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0702151 Jy ! Component: 100 - total flux cleaned = 0.109501 Jy ! Component: 150 - total flux cleaned = 0.13529 Jy ! Component: 200 - total flux cleaned = 0.142477 Jy ! Total flux subtracted in 200 components = 0.142477 Jy ! Clean residual min=-0.049824 max=0.059081 Jy/beam ! Clean residual mean=-0.000142 rms=0.013661 Jy/beam ! Combined flux in latest and established models = 0.898936 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 42 components and 0.898936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217283Jy sigma=0.001606 ! Fit after self-cal, rms=0.217290Jy sigma=0.001605 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.90 HN 0.95 KP 1.05 ! LA 1.02 MK 0.97 NL 0.88 OV 0.95 ! PT 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.29 FD 0.97 HN 1.01 KP 0.98 ! LA 0.98 MK 0.98 NL 1.01 OV 0.98 ! PT 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.98 KP 0.98 ! LA 0.99 MK 1.02 NL 0.95 OV 0.89 ! PT 0.94 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.31 HN 1.00 KP 1.00* ! LA 1.43 MK 1.22 NL 1.00* OV 0.80 ! PT 0.99 ! ! ! Fit before self-cal, rms=0.217290Jy sigma=0.001605 ! Fit after self-cal, rms=0.209140Jy sigma=0.001405 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.961 mas, bmaj=17.01 mas, bpa=-13.4 degrees ! Estimated noise=1880.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00635807 Jy ! Component: 100 - total flux cleaned = -0.00828461 Jy ! Component: 150 - total flux cleaned = -0.00993104 Jy ! Component: 200 - total flux cleaned = -0.0109597 Jy ! Total flux subtracted in 200 components = -0.0109597 Jy ! Clean residual min=-0.044318 max=0.051713 Jy/beam ! Clean residual mean=-0.000122 rms=0.012005 Jy/beam ! Combined flux in latest and established models = 0.887976 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 64 components and 0.887976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205009Jy sigma=0.001379 ! Fit after self-cal, rms=0.205053Jy sigma=0.001379 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205053Jy sigma=0.001379 ! Fit after self-cal, rms=0.113068Jy sigma=0.000710 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.992 mas, bmaj=16.59 mas, bpa=-13.37 degrees ! Estimated noise=1882.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0116501 Jy ! Component: 100 - total flux cleaned = -0.014868 Jy ! Component: 150 - total flux cleaned = -0.0155715 Jy ! Component: 200 - total flux cleaned = -0.0162023 Jy ! Total flux subtracted in 200 components = -0.0162023 Jy ! Clean residual min=-0.011322 max=0.009433 Jy/beam ! Clean residual mean=0.000010 rms=0.002399 Jy/beam ! Combined flux in latest and established models = 0.871774 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 79 components and 0.871774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111594Jy sigma=0.000693 ! Fit after self-cal, rms=0.112012Jy sigma=0.000692 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000572369 Jy ! Component: 100 - total flux cleaned = -0.00109697 Jy ! Component: 150 - total flux cleaned = -0.0015837 Jy ! Component: 200 - total flux cleaned = -0.00203882 Jy ! Total flux subtracted in 200 components = -0.00203882 Jy ! Clean residual min=-0.010613 max=0.009251 Jy/beam ! Clean residual mean=0.000009 rms=0.002263 Jy/beam ! Combined flux in latest and established models = 0.869735 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 89 components and 0.869735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111623Jy sigma=0.000687 ! Fit after self-cal, rms=0.111619Jy sigma=0.000687 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111619Jy sigma=0.000687 ! Fit after self-cal, rms=0.112770Jy sigma=0.000684 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.994 mas, bmaj=16.7 mas, bpa=-13.35 degrees ! Estimated noise=1883.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00741907 Jy ! Component: 100 - total flux cleaned = -0.0103094 Jy ! Component: 150 - total flux cleaned = -0.0110807 Jy ! Component: 200 - total flux cleaned = -0.011617 Jy ! Total flux subtracted in 200 components = -0.011617 Jy ! Clean residual min=-0.008642 max=0.007737 Jy/beam ! Clean residual mean=0.000005 rms=0.001971 Jy/beam ! Combined flux in latest and established models = 0.858118 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 94 components and 0.858118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112144Jy sigma=0.000676 ! Fit after self-cal, rms=0.112152Jy sigma=0.000676 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000367211 Jy ! Component: 100 - total flux cleaned = -0.000709733 Jy ! Component: 150 - total flux cleaned = -0.00102726 Jy ! Component: 200 - total flux cleaned = -0.00132498 Jy ! Total flux subtracted in 200 components = -0.00132498 Jy ! Clean residual min=-0.008209 max=0.007476 Jy/beam ! Clean residual mean=0.000004 rms=0.001908 Jy/beam ! Combined flux in latest and established models = 0.856794 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 96 components and 0.856794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111986Jy sigma=0.000674 ! Fit after self-cal, rms=0.111983Jy sigma=0.000674 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111983Jy sigma=0.000674 ! Fit after self-cal, rms=0.112983Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.837 mas, bmaj=19.06 mas, bpa=-4.983 degrees ! Estimated noise=2169.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00465611 Jy ! Component: 100 - total flux cleaned = -0.00537424 Jy ! Component: 150 - total flux cleaned = -0.00583246 Jy ! Component: 200 - total flux cleaned = -0.006198 Jy ! Total flux subtracted in 200 components = -0.006198 Jy ! Clean residual min=-0.007503 max=0.005954 Jy/beam ! Clean residual mean=0.000004 rms=0.001859 Jy/beam ! Combined flux in latest and established models = 0.850596 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 109 components and 0.850596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112803Jy sigma=0.000670 ! Fit after self-cal, rms=0.112809Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000236195 Jy ! Component: 100 - total flux cleaned = -0.000340877 Jy ! Component: 150 - total flux cleaned = -0.000474877 Jy ! Component: 200 - total flux cleaned = -0.000551355 Jy ! Total flux subtracted in 200 components = -0.000551355 Jy ! Clean residual min=-0.007456 max=0.005849 Jy/beam ! Clean residual mean=0.000004 rms=0.001849 Jy/beam ! Combined flux in latest and established models = 0.850044 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 118 components and 0.850044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112760Jy sigma=0.000670 ! Fit after self-cal, rms=0.112760Jy sigma=0.000670 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.994 mas, bmaj=16.78 mas, bpa=-13.35 degrees ! Estimated noise=1884.29 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.994 x 16.78 at -13.35 degrees (North through East) ! Clean map min=-0.0071767 max=0.77085 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112760Jy sigma=0.000670 ! Fit after self-cal, rms=0.109539Jy sigma=0.000603 ! Inverting map and beam ! Estimated beam: bmin=3.994 mas, bmaj=16.85 mas, bpa=-13.34 degrees ! Estimated noise=1885.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00459552 Jy ! Component: 100 - total flux cleaned = -0.00610648 Jy ! Component: 150 - total flux cleaned = -0.0069453 Jy ! Component: 200 - total flux cleaned = -0.00742245 Jy ! Total flux subtracted in 200 components = -0.00742245 Jy ! Clean residual min=-0.006077 max=0.006366 Jy/beam ! Clean residual mean=0.000002 rms=0.001567 Jy/beam ! Combined flux in latest and established models = 0.842622 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 137 components and 0.842622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109274Jy sigma=0.000601 ! Fit after self-cal, rms=0.109271Jy sigma=0.000601 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000351954 Jy ! Component: 100 - total flux cleaned = -0.000602195 Jy ! Component: 150 - total flux cleaned = -0.000828027 Jy ! Component: 200 - total flux cleaned = -0.000929233 Jy ! Total flux subtracted in 200 components = -0.000929233 Jy ! Clean residual min=-0.005920 max=0.006385 Jy/beam ! Clean residual mean=0.000001 rms=0.001557 Jy/beam ! Combined flux in latest and established models = 0.841693 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 146 components and 0.841693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109210Jy sigma=0.000600 ! Fit after self-cal, rms=0.109210Jy sigma=0.000600 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109210Jy sigma=0.000600 ! Fit after self-cal, rms=0.110047Jy sigma=0.000599 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.235 mas, bmaj=16.24 mas, bpa=-14.05 degrees ! Estimated noise=2363.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.614118 Jy ! Component: 100 - total flux cleaned = 0.748263 Jy ! Component: 150 - total flux cleaned = 0.783724 Jy ! Component: 200 - total flux cleaned = 0.798403 Jy ! Total flux subtracted in 200 components = 0.798403 Jy ! Clean residual min=-0.006854 max=0.007780 Jy/beam ! Clean residual mean=-0.000006 rms=0.002191 Jy/beam ! Combined flux in latest and established models = 0.798403 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.798403 Jy ! Inverting map and beam ! Estimated beam: bmin=3.992 mas, bmaj=16.91 mas, bpa=-13.35 degrees ! Estimated noise=1886.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117824 Jy ! Component: 100 - total flux cleaned = 0.0196187 Jy ! Component: 150 - total flux cleaned = 0.0250599 Jy ! Component: 200 - total flux cleaned = 0.0288878 Jy ! Total flux subtracted in 200 components = 0.0288878 Jy ! Clean residual min=-0.005777 max=0.007412 Jy/beam ! Clean residual mean=-0.000004 rms=0.001621 Jy/beam ! Combined flux in latest and established models = 0.827291 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 60 components and 0.827291 Jy ! Inverting map ! Added new window around map position (9, -13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00558843 Jy ! Component: 100 - total flux cleaned = 0.00632239 Jy ! Component: 150 - total flux cleaned = 0.00730365 Jy ! Component: 200 - total flux cleaned = 0.0078302 Jy ! Total flux subtracted in 200 components = 0.0078302 Jy ! Clean residual min=-0.005001 max=0.004356 Jy/beam ! Clean residual mean=0.000003 rms=0.001325 Jy/beam ! Combined flux in latest and established models = 0.835121 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 87 components and 0.835121 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.836 mas, bmaj=19.19 mas, bpa=-5.102 degrees ! Estimated noise=2170.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000838768 Jy ! Component: 100 - total flux cleaned = 0.00143087 Jy ! Component: 150 - total flux cleaned = 0.00187525 Jy ! Component: 200 - total flux cleaned = 0.00236078 Jy ! Total flux subtracted in 200 components = 0.00236078 Jy ! Clean residual min=-0.005212 max=0.004351 Jy/beam ! Clean residual mean=0.000006 rms=0.001471 Jy/beam ! Combined flux in latest and established models = 0.837482 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000375511 Jy ! Component: 100 - total flux cleaned = 0.000727678 Jy ! Component: 150 - total flux cleaned = 0.000991221 Jy ! Component: 200 - total flux cleaned = 0.00124045 Jy ! Total flux subtracted in 200 components = 0.00124045 Jy ! Clean residual min=-0.005004 max=0.004240 Jy/beam ! Clean residual mean=0.000008 rms=0.001413 Jy/beam ! Combined flux in latest and established models = 0.838722 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 132 components and 0.838722 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.992 mas, bmaj=16.91 mas, bpa=-13.35 degrees ! Estimated noise=1886.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000250042 Jy ! Component: 100 - total flux cleaned = 0.000176193 Jy ! Component: 150 - total flux cleaned = 0.000310658 Jy ! Component: 200 - total flux cleaned = 0.000434225 Jy ! Total flux subtracted in 200 components = 0.000434225 Jy ! Clean residual min=-0.004471 max=0.004055 Jy/beam ! Clean residual mean=0.000006 rms=0.001195 Jy/beam ! Combined flux in latest and established models = 0.839156 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 149 components and 0.839157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109303Jy sigma=0.000592 ! Fit after self-cal, rms=0.109283Jy sigma=0.000592 wmodel J2358-1020_S_2017_09_26_pus_map.mod ! Writing 149 model components to file: J2358-1020_S_2017_09_26_pus_map.mod wobs J2358-1020_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J2358-1020_S_2017_09_26_pus_uvs.fits wwins J2358-1020_S_2017_09_26_pus_map.win ! wwins: Wrote 2 windows to J2358-1020_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00137428 Jy ! Component: 100 - total flux cleaned = -0.00218589 Jy ! Component: 150 - total flux cleaned = -0.00274368 Jy ! Component: 200 - total flux cleaned = -0.00320739 Jy ! Component: 250 - total flux cleaned = -0.00345997 Jy ! Component: 300 - total flux cleaned = -0.00376339 Jy ! Component: 350 - total flux cleaned = -0.00393726 Jy ! Component: 400 - total flux cleaned = -0.00410479 Jy ! Component: 450 - total flux cleaned = -0.00405032 Jy ! Component: 500 - total flux cleaned = -0.00436464 Jy ! Component: 550 - total flux cleaned = -0.00446503 Jy ! Component: 600 - total flux cleaned = -0.00456381 Jy ! Component: 650 - total flux cleaned = -0.00504395 Jy ! Component: 700 - total flux cleaned = -0.00546518 Jy ! Component: 750 - total flux cleaned = -0.00587581 Jy ! Component: 800 - total flux cleaned = -0.00618802 Jy ! Component: 850 - total flux cleaned = -0.00645071 Jy ! Component: 900 - total flux cleaned = -0.00679088 Jy ! Component: 950 - total flux cleaned = -0.00703883 Jy ! Component: 1000 - total flux cleaned = -0.00720058 Jy ! Component: 1050 - total flux cleaned = -0.00724137 Jy ! Component: 1100 - total flux cleaned = -0.00747536 Jy ! Component: 1150 - total flux cleaned = -0.00747546 Jy ! Component: 1200 - total flux cleaned = -0.00766448 Jy ! Component: 1250 - total flux cleaned = -0.00788742 Jy ! Component: 1300 - total flux cleaned = -0.00806909 Jy ! Component: 1350 - total flux cleaned = -0.00817708 Jy ! Component: 1400 - total flux cleaned = -0.00838908 Jy ! Component: 1450 - total flux cleaned = -0.00845859 Jy ! Component: 1500 - total flux cleaned = -0.00862914 Jy ! Component: 1550 - total flux cleaned = -0.00869639 Jy ! Component: 1600 - total flux cleaned = -0.00896111 Jy ! Component: 1650 - total flux cleaned = -0.00896037 Jy ! Component: 1700 - total flux cleaned = -0.00908958 Jy ! Component: 1750 - total flux cleaned = -0.00912116 Jy ! Component: 1800 - total flux cleaned = -0.00927863 Jy ! Component: 1850 - total flux cleaned = -0.00943334 Jy ! Component: 1900 - total flux cleaned = -0.00946372 Jy ! Component: 1950 - total flux cleaned = -0.00955433 Jy ! Component: 2000 - total flux cleaned = -0.00964379 Jy ! Component: 2050 - total flux cleaned = -0.00961449 Jy ! Component: 2100 - total flux cleaned = -0.00978979 Jy ! Component: 2150 - total flux cleaned = -0.00976121 Jy ! Component: 2200 - total flux cleaned = -0.0097613 Jy ! Component: 2250 - total flux cleaned = -0.00987417 Jy ! Component: 2300 - total flux cleaned = -0.00981837 Jy ! Component: 2350 - total flux cleaned = -0.00981858 Jy ! Component: 2400 - total flux cleaned = -0.00987308 Jy ! Component: 2450 - total flux cleaned = -0.00992706 Jy ! Component: 2500 - total flux cleaned = -0.0100069 Jy ! Component: 2550 - total flux cleaned = -0.0100332 Jy ! Component: 2600 - total flux cleaned = -0.0100334 Jy ! Component: 2650 - total flux cleaned = -0.0102149 Jy ! Component: 2700 - total flux cleaned = -0.0102662 Jy ! Component: 2750 - total flux cleaned = -0.0102917 Jy ! Component: 2800 - total flux cleaned = -0.0103423 Jy ! Component: 2850 - total flux cleaned = -0.0104665 Jy ! Component: 2900 - total flux cleaned = -0.0105156 Jy ! Component: 2950 - total flux cleaned = -0.0105888 Jy ! Component: 3000 - total flux cleaned = -0.0106608 Jy ! Component: 3050 - total flux cleaned = -0.0105886 Jy ! Component: 3100 - total flux cleaned = -0.0106596 Jy ! Component: 3150 - total flux cleaned = -0.0105889 Jy ! Component: 3200 - total flux cleaned = -0.0106356 Jy ! Component: 3250 - total flux cleaned = -0.0106818 Jy ! Component: 3300 - total flux cleaned = -0.0107051 Jy ! Component: 3350 - total flux cleaned = -0.0107056 Jy ! Component: 3400 - total flux cleaned = -0.0106832 Jy ! Component: 3450 - total flux cleaned = -0.0107505 Jy ! Component: 3500 - total flux cleaned = -0.0107064 Jy ! Component: 3550 - total flux cleaned = -0.0107504 Jy ! Component: 3600 - total flux cleaned = -0.01075 Jy ! Component: 3650 - total flux cleaned = -0.0107934 Jy ! Component: 3700 - total flux cleaned = -0.010772 Jy ! Component: 3750 - total flux cleaned = -0.0107506 Jy ! Component: 3800 - total flux cleaned = -0.0107086 Jy ! Component: 3850 - total flux cleaned = -0.0107719 Jy ! Component: 3900 - total flux cleaned = -0.0107301 Jy ! Component: 3950 - total flux cleaned = -0.0107506 Jy ! Component: 4000 - total flux cleaned = -0.0106888 Jy ! Component: 4050 - total flux cleaned = -0.0106684 Jy ! Total flux subtracted in 4096 components = -0.0107089 Jy ! Clean residual min=-0.001325 max=0.001224 Jy/beam ! Clean residual mean=-0.000000 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.828448 Jy keep ! Adding 324 model components to the UV plane model. ! The established model now contains 473 components and 0.828447 Jy ![Exited script file: muppet] wmap "J2358-1020_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.992 x 16.91 at -13.35 degrees (North through East) ! Clean map min=-0.0032261 max=0.78039 Jy/beam ! Writing clean map to FITS file: J2358-1020_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.780392 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00039536 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.151985 0.151985 0.30397 0.607941 1.21588 2.43176 4.86352 9.72705 19.4541 38.9082 77.8164 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.78 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.992 x 16.91 at -13.35 degrees (North through East) ! Clean map min=-0.0032261 max=0.78039 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2358-1020_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:09:29 2019