! Started logfile: J2358-1020_S_2017_08_05_pus_uvs.log on Thu May 9 19:41:31 2019 obs J2358-1020_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J2358-1020_S_2017_08_05_pus_uva.fits ! AN table 1: 23 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.882126 visibilities/baseline/integration-bin. ! Found source: J2358-1020 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 3652 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2358-1020_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 156 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.453323Jy sigma=0.003719 ! Fit after self-cal, rms=0.419150Jy sigma=0.003419 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.612 mas, bmaj=7.163 mas, bpa=-1.738 degrees ! Estimated noise=1983.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.532851 Jy ! Component: 100 - total flux cleaned = 0.679014 Jy ! Total flux subtracted in 100 components = 0.679014 Jy ! Clean residual min=-0.058781 max=0.093197 Jy/beam ! Clean residual mean=0.000106 rms=0.015629 Jy/beam ! Combined flux in latest and established models = 0.679014 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.679014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.274781Jy sigma=0.002143 ! Fit after self-cal, rms=0.274776Jy sigma=0.002143 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.137 mas, bmaj=7.888 mas, bpa=-0.5156 degrees ! Estimated noise=1711.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-18, 46). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.102107 Jy ! Component: 100 - total flux cleaned = 0.162991 Jy ! Component: 150 - total flux cleaned = 0.188695 Jy ! Component: 200 - total flux cleaned = 0.202979 Jy ! Total flux subtracted in 200 components = 0.202979 Jy ! Clean residual min=-0.045593 max=0.076904 Jy/beam ! Clean residual mean=0.000043 rms=0.012027 Jy/beam ! Combined flux in latest and established models = 0.881993 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 32 components and 0.881993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226176Jy sigma=0.001751 ! Fit after self-cal, rms=0.222634Jy sigma=0.001720 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.85 HN 1.27 KP 1.01 ! LA 1.02 MK 0.97 NL 0.87 OV 1.00 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 HN 1.36 KP 0.96 ! LA 0.99 MK 0.95 NL 1.02 OV 1.03 ! PT 0.99 SC 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.33 KP 0.84 ! LA 0.77 MK 1.00 NL 1.17 OV 0.95 ! PT 0.99 SC 1.12 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 HN 1.25 KP 1.00* ! LA 1.00* MK 1.23 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.222634Jy sigma=0.001720 ! Fit after self-cal, rms=0.201296Jy sigma=0.001445 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=7.987 mas, bpa=-0.3541 degrees ! Estimated noise=1699.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00156685 Jy ! Component: 100 - total flux cleaned = -0.00469676 Jy ! Component: 150 - total flux cleaned = -0.00737938 Jy ! Component: 200 - total flux cleaned = -0.00895164 Jy ! Total flux subtracted in 200 components = -0.00895164 Jy ! Clean residual min=-0.035473 max=0.040703 Jy/beam ! Clean residual mean=0.000010 rms=0.008640 Jy/beam ! Combined flux in latest and established models = 0.873041 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 44 components and 0.873041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190092Jy sigma=0.001367 ! Fit after self-cal, rms=0.189749Jy sigma=0.001364 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189749Jy sigma=0.001364 ! Fit after self-cal, rms=0.155198Jy sigma=0.000852 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.195 mas, bmaj=8.692 mas, bpa=-2.974 degrees ! Estimated noise=1817.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00585881 Jy ! Component: 100 - total flux cleaned = -0.006452 Jy ! Component: 150 - total flux cleaned = -0.00741503 Jy ! Component: 200 - total flux cleaned = -0.00855624 Jy ! Total flux subtracted in 200 components = -0.00855624 Jy ! Clean residual min=-0.014246 max=0.015693 Jy/beam ! Clean residual mean=0.000006 rms=0.003699 Jy/beam ! Combined flux in latest and established models = 0.864485 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 60 components and 0.864485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152415Jy sigma=0.000804 ! Fit after self-cal, rms=0.152404Jy sigma=0.000801 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00459422 Jy ! Component: 100 - total flux cleaned = -0.00618965 Jy ! Component: 150 - total flux cleaned = -0.00700437 Jy ! Component: 200 - total flux cleaned = -0.00772619 Jy ! Total flux subtracted in 200 components = -0.00772619 Jy ! Clean residual min=-0.013409 max=0.014079 Jy/beam ! Clean residual mean=0.000008 rms=0.003458 Jy/beam ! Combined flux in latest and established models = 0.856759 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 68 components and 0.856759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151932Jy sigma=0.000783 ! Fit after self-cal, rms=0.151790Jy sigma=0.000782 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151790Jy sigma=0.000782 ! Fit after self-cal, rms=0.169942Jy sigma=0.000747 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.179 mas, bmaj=8.727 mas, bpa=-2.99 degrees ! Estimated noise=1821.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00318079 Jy ! Component: 100 - total flux cleaned = -0.00396213 Jy ! Component: 150 - total flux cleaned = -0.00427363 Jy ! Component: 200 - total flux cleaned = -0.00483853 Jy ! Total flux subtracted in 200 components = -0.00483853 Jy ! Clean residual min=-0.011324 max=0.011198 Jy/beam ! Clean residual mean=0.000002 rms=0.002673 Jy/beam ! Combined flux in latest and established models = 0.85192 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 81 components and 0.85192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167804Jy sigma=0.000725 ! Fit after self-cal, rms=0.167709Jy sigma=0.000723 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00290331 Jy ! Component: 100 - total flux cleaned = -0.00314861 Jy ! Component: 150 - total flux cleaned = -0.00315014 Jy ! Component: 200 - total flux cleaned = -0.00315349 Jy ! Total flux subtracted in 200 components = -0.00315349 Jy ! Clean residual min=-0.010408 max=0.010408 Jy/beam ! Clean residual mean=0.000002 rms=0.002482 Jy/beam ! Combined flux in latest and established models = 0.848767 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 85 components and 0.848767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166960Jy sigma=0.000713 ! Fit after self-cal, rms=0.166883Jy sigma=0.000712 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166883Jy sigma=0.000712 ! Fit after self-cal, rms=0.173971Jy sigma=0.000707 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.16 mas, bmaj=16.66 mas, bpa=3.223 degrees ! Estimated noise=2239.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00395919 Jy ! Component: 100 - total flux cleaned = -0.00396172 Jy ! Component: 150 - total flux cleaned = -0.00427508 Jy ! Component: 200 - total flux cleaned = -0.00416382 Jy ! Total flux subtracted in 200 components = -0.00416382 Jy ! Clean residual min=-0.008436 max=0.007702 Jy/beam ! Clean residual mean=-0.000002 rms=0.002387 Jy/beam ! Combined flux in latest and established models = 0.844603 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 95 components and 0.844603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173403Jy sigma=0.000702 ! Fit after self-cal, rms=0.173351Jy sigma=0.000701 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00192166 Jy ! Component: 100 - total flux cleaned = -0.00202579 Jy ! Component: 150 - total flux cleaned = -0.00193466 Jy ! Component: 200 - total flux cleaned = -0.00193286 Jy ! Total flux subtracted in 200 components = -0.00193286 Jy ! Clean residual min=-0.007882 max=0.007780 Jy/beam ! Clean residual mean=-0.000004 rms=0.002306 Jy/beam ! Combined flux in latest and established models = 0.84267 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 102 components and 0.84267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173181Jy sigma=0.000699 ! Fit after self-cal, rms=0.173159Jy sigma=0.000699 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.172 mas, bmaj=8.721 mas, bpa=-2.961 degrees ! Estimated noise=1818.72 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.172 x 8.721 at -2.961 degrees (North through East) ! Clean map min=-0.016298 max=0.69219 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173159Jy sigma=0.000699 ! Fit after self-cal, rms=0.192946Jy sigma=0.000649 ! Inverting map and beam ! Estimated beam: bmin=3.174 mas, bmaj=8.729 mas, bpa=-2.965 degrees ! Estimated noise=1821.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00346551 Jy ! Component: 100 - total flux cleaned = -0.00280145 Jy ! Component: 150 - total flux cleaned = -0.00261413 Jy ! Component: 200 - total flux cleaned = -0.00225826 Jy ! Total flux subtracted in 200 components = -0.00225826 Jy ! Clean residual min=-0.008541 max=0.008495 Jy/beam ! Clean residual mean=0.000000 rms=0.001969 Jy/beam ! Combined flux in latest and established models = 0.840412 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 111 components and 0.840412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192317Jy sigma=0.000640 ! Fit after self-cal, rms=0.192273Jy sigma=0.000639 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00175198 Jy ! Component: 100 - total flux cleaned = -0.0015997 Jy ! Component: 150 - total flux cleaned = -0.00159921 Jy ! Component: 200 - total flux cleaned = -0.00159339 Jy ! Total flux subtracted in 200 components = -0.00159339 Jy ! Clean residual min=-0.008019 max=0.007789 Jy/beam ! Clean residual mean=0.000001 rms=0.001873 Jy/beam ! Combined flux in latest and established models = 0.838818 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 115 components and 0.838818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192014Jy sigma=0.000635 ! Fit after self-cal, rms=0.191988Jy sigma=0.000635 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191988Jy sigma=0.000635 ! Fit after self-cal, rms=0.195695Jy sigma=0.000633 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.615 mas, bmaj=7.633 mas, bpa=-2.732 degrees ! Estimated noise=2094.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.560433 Jy ! Component: 100 - total flux cleaned = 0.693892 Jy ! Component: 150 - total flux cleaned = 0.745644 Jy ! Component: 200 - total flux cleaned = 0.77675 Jy ! Total flux subtracted in 200 components = 0.77675 Jy ! Clean residual min=-0.011154 max=0.017027 Jy/beam ! Clean residual mean=0.000040 rms=0.003091 Jy/beam ! Combined flux in latest and established models = 0.776751 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.776751 Jy ! Inverting map and beam ! Estimated beam: bmin=3.169 mas, bmaj=8.72 mas, bpa=-2.937 degrees ! Estimated noise=1817.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0266568 Jy ! Component: 100 - total flux cleaned = 0.0423198 Jy ! Component: 150 - total flux cleaned = 0.0524217 Jy ! Component: 200 - total flux cleaned = 0.056366 Jy ! Total flux subtracted in 200 components = 0.056366 Jy ! Clean residual min=-0.006795 max=0.008045 Jy/beam ! Clean residual mean=0.000012 rms=0.001728 Jy/beam ! Combined flux in latest and established models = 0.833117 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 65 components and 0.833117 Jy ! Inverting map ! Added new window around map position (25.5, -37.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00465537 Jy ! Component: 100 - total flux cleaned = 0.00505136 Jy ! Component: 150 - total flux cleaned = 0.00504516 Jy ! Component: 200 - total flux cleaned = 0.00504826 Jy ! Total flux subtracted in 200 components = 0.00504826 Jy ! Clean residual min=-0.006303 max=0.005547 Jy/beam ! Clean residual mean=0.000006 rms=0.001555 Jy/beam ! Combined flux in latest and established models = 0.838165 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 87 components and 0.838165 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.148 mas, bmaj=16.66 mas, bpa=3.133 degrees ! Estimated noise=2242.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000464161 Jy ! Component: 100 - total flux cleaned = 0.000603457 Jy ! Component: 150 - total flux cleaned = 0.000546751 Jy ! Component: 200 - total flux cleaned = 0.000499359 Jy ! Total flux subtracted in 200 components = 0.000499359 Jy ! Clean residual min=-0.006249 max=0.005320 Jy/beam ! Clean residual mean=0.000006 rms=0.001756 Jy/beam ! Combined flux in latest and established models = 0.838664 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.9921e-05 Jy ! Component: 100 - total flux cleaned = -0.000132542 Jy ! Component: 150 - total flux cleaned = -0.000210414 Jy ! Component: 200 - total flux cleaned = -0.000172927 Jy ! Total flux subtracted in 200 components = -0.000172927 Jy ! Clean residual min=-0.006219 max=0.005285 Jy/beam ! Clean residual mean=0.000004 rms=0.001747 Jy/beam ! Combined flux in latest and established models = 0.838491 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 128 components and 0.838491 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.169 mas, bmaj=8.72 mas, bpa=-2.937 degrees ! Estimated noise=1817.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000288182 Jy ! Component: 100 - total flux cleaned = -0.000157145 Jy ! Component: 150 - total flux cleaned = -3.61453e-05 Jy ! Component: 200 - total flux cleaned = 7.38882e-05 Jy ! Total flux subtracted in 200 components = 7.38882e-05 Jy ! Clean residual min=-0.006308 max=0.005376 Jy/beam ! Clean residual mean=0.000004 rms=0.001485 Jy/beam ! Combined flux in latest and established models = 0.838565 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 134 components and 0.838565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196854Jy sigma=0.000619 ! Fit after self-cal, rms=0.196655Jy sigma=0.000615 wmodel J2358-1020_S_2017_08_05_pus_map.mod ! Writing 134 model components to file: J2358-1020_S_2017_08_05_pus_map.mod wobs J2358-1020_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J2358-1020_S_2017_08_05_pus_uvs.fits wwins J2358-1020_S_2017_08_05_pus_map.win ! wwins: Wrote 3 windows to J2358-1020_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00145594 Jy ! Component: 100 - total flux cleaned = -0.00230052 Jy ! Component: 150 - total flux cleaned = -0.00327902 Jy ! Component: 200 - total flux cleaned = -0.00437892 Jy ! Component: 250 - total flux cleaned = -0.00543598 Jy ! Component: 300 - total flux cleaned = -0.00629771 Jy ! Component: 350 - total flux cleaned = -0.00698063 Jy ! Component: 400 - total flux cleaned = -0.00757159 Jy ! Component: 450 - total flux cleaned = -0.00800543 Jy ! Component: 500 - total flux cleaned = -0.00856907 Jy ! Component: 550 - total flux cleaned = -0.00905104 Jy ! Component: 600 - total flux cleaned = -0.00952296 Jy ! Component: 650 - total flux cleaned = -0.0100536 Jy ! Component: 700 - total flux cleaned = -0.0105075 Jy ! Component: 750 - total flux cleaned = -0.0108886 Jy ! Component: 800 - total flux cleaned = -0.011324 Jy ! Component: 850 - total flux cleaned = -0.011568 Jy ! Component: 900 - total flux cleaned = -0.0118098 Jy ! Component: 950 - total flux cleaned = -0.0122259 Jy ! Component: 1000 - total flux cleaned = -0.012402 Jy ! Component: 1050 - total flux cleaned = -0.0126327 Jy ! Component: 1100 - total flux cleaned = -0.0128024 Jy ! Component: 1150 - total flux cleaned = -0.0129141 Jy ! Component: 1200 - total flux cleaned = -0.0130807 Jy ! Component: 1250 - total flux cleaned = -0.0131896 Jy ! Component: 1300 - total flux cleaned = -0.0134037 Jy ! Component: 1350 - total flux cleaned = -0.0135092 Jy ! Component: 1400 - total flux cleaned = -0.013457 Jy ! Component: 1450 - total flux cleaned = -0.013663 Jy ! Component: 1500 - total flux cleaned = -0.0136625 Jy ! Component: 1550 - total flux cleaned = -0.0135621 Jy ! Component: 1600 - total flux cleaned = -0.0136122 Jy ! Component: 1650 - total flux cleaned = -0.0134643 Jy ! Component: 1700 - total flux cleaned = -0.0132692 Jy ! Component: 1750 - total flux cleaned = -0.0132214 Jy ! Component: 1800 - total flux cleaned = -0.0132698 Jy ! Component: 1850 - total flux cleaned = -0.0132226 Jy ! Component: 1900 - total flux cleaned = -0.0130354 Jy ! Component: 1950 - total flux cleaned = -0.0129891 Jy ! Component: 2000 - total flux cleaned = -0.012898 Jy ! Component: 2050 - total flux cleaned = -0.0129896 Jy ! Component: 2100 - total flux cleaned = -0.0128541 Jy ! Component: 2150 - total flux cleaned = -0.0128534 Jy ! Component: 2200 - total flux cleaned = -0.0125879 Jy ! Component: 2250 - total flux cleaned = -0.0125001 Jy ! Component: 2300 - total flux cleaned = -0.0122393 Jy ! Component: 2350 - total flux cleaned = -0.0121103 Jy ! Component: 2400 - total flux cleaned = -0.0119392 Jy ! Component: 2450 - total flux cleaned = -0.0118547 Jy ! Component: 2500 - total flux cleaned = -0.011729 Jy ! Component: 2550 - total flux cleaned = -0.0114797 Jy ! Component: 2600 - total flux cleaned = -0.0111501 Jy ! Component: 2650 - total flux cleaned = -0.0109454 Jy ! Component: 2700 - total flux cleaned = -0.0106619 Jy ! Component: 2750 - total flux cleaned = -0.0104606 Jy ! Component: 2800 - total flux cleaned = -0.0102611 Jy ! Component: 2850 - total flux cleaned = -0.0100232 Jy ! Component: 2900 - total flux cleaned = -0.0099051 Jy ! Component: 2950 - total flux cleaned = -0.00967074 Jy ! Component: 3000 - total flux cleaned = -0.00943829 Jy ! Component: 3050 - total flux cleaned = -0.00916903 Jy ! Component: 3100 - total flux cleaned = -0.00897738 Jy ! Component: 3150 - total flux cleaned = -0.00871167 Jy ! Component: 3200 - total flux cleaned = -0.00848535 Jy ! Component: 3250 - total flux cleaned = -0.0082604 Jy ! Component: 3300 - total flux cleaned = -0.00814864 Jy ! Component: 3350 - total flux cleaned = -0.00796375 Jy ! Component: 3400 - total flux cleaned = -0.00767023 Jy ! Component: 3450 - total flux cleaned = -0.00756088 Jy ! Component: 3500 - total flux cleaned = -0.0072712 Jy ! Component: 3550 - total flux cleaned = -0.00719939 Jy ! Component: 3600 - total flux cleaned = -0.00691327 Jy ! Component: 3650 - total flux cleaned = -0.00680691 Jy ! Component: 3700 - total flux cleaned = -0.00663038 Jy ! Component: 3750 - total flux cleaned = -0.00656029 Jy ! Component: 3800 - total flux cleaned = -0.00638612 Jy ! Component: 3850 - total flux cleaned = -0.0062825 Jy ! Component: 3900 - total flux cleaned = -0.00604184 Jy ! Component: 3950 - total flux cleaned = -0.00600763 Jy ! Component: 4000 - total flux cleaned = -0.00587151 Jy ! Component: 4050 - total flux cleaned = -0.00580386 Jy ! Total flux subtracted in 4096 components = -0.0056018 Jy ! Clean residual min=-0.002061 max=0.001896 Jy/beam ! Clean residual mean=0.000005 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.832964 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 422 components and 0.832964 Jy ![Exited script file: muppet] wmap "J2358-1020_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.169 x 8.72 at -2.937 degrees (North through East) ! Clean map min=-0.0063329 max=0.71312 Jy/beam ! Writing clean map to FITS file: J2358-1020_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.713116 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00061801 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.25999 0.25999 0.51998 1.03996 2.07992 4.15984 8.31967 16.6393 33.2787 66.5574 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.713 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.169 x 8.72 at -2.937 degrees (North through East) ! Clean map min=-0.0063329 max=0.71312 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2358-1020_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:41:36 2019