! Started logfile: J2358+4921_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:52:52 2019 obs J2358+4921_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J2358+4921_S_2017_03_27_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.863735 visibilities/baseline/integration-bin. ! Found source: J2358+4921 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 22388 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2358+4921_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 106 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 106 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 106 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 648 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.972288Jy sigma=0.008783 ! Fit after self-cal, rms=0.949058Jy sigma=0.008601 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.126 mas, bmaj=4.446 mas, bpa=-13.15 degrees ! Estimated noise=1000.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0419373 Jy ! Component: 100 - total flux cleaned = 0.0511357 Jy ! Total flux subtracted in 100 components = 0.0511357 Jy ! Clean residual min=-0.003199 max=0.003576 Jy/beam ! Clean residual mean=0.000001 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.0511357 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0511357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076414Jy sigma=0.000652 ! Fit after self-cal, rms=0.076107Jy sigma=0.000650 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.644 mas, bmaj=5.238 mas, bpa=-11.86 degrees ! Estimated noise=579.255 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00285969 Jy ! Component: 100 - total flux cleaned = 0.00401489 Jy ! Component: 150 - total flux cleaned = 0.00404377 Jy ! Component: 200 - total flux cleaned = 0.00402165 Jy ! Total flux subtracted in 200 components = 0.00402165 Jy ! Clean residual min=-0.001842 max=0.001969 Jy/beam ! Clean residual mean=0.000007 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.0551574 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 21 components and 0.0551574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075993Jy sigma=0.000649 ! Fit after self-cal, rms=0.076000Jy sigma=0.000649 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.99 HN 0.99 KP 1.41 ! LA 0.98 MK 1.03 NL 0.98 OV 1.01 ! PT 1.01 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 1.04 KP 1.02 ! LA 0.98 MK 0.99 NL 0.98 OV 1.03 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.13 HN 0.96 KP 0.95 ! LA 1.00 MK 1.04 NL 0.92 OV 1.14 ! PT 0.91 SC 1.04 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.04 HN 0.82 KP 1.00* ! LA 0.96 MK 0.92 NL 1.00* OV 0.92 ! PT 0.94 SC 1.00* ! ! ! Fit before self-cal, rms=0.076000Jy sigma=0.000649 ! Fit after self-cal, rms=0.076137Jy sigma=0.000647 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.639 mas, bmaj=5.219 mas, bpa=-12 degrees ! Estimated noise=578.195 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000558904 Jy ! Component: 100 - total flux cleaned = 0.000609222 Jy ! Component: 150 - total flux cleaned = 0.000619705 Jy ! Component: 200 - total flux cleaned = 0.000628551 Jy ! Total flux subtracted in 200 components = 0.000628551 Jy ! Clean residual min=-0.001602 max=0.001631 Jy/beam ! Clean residual mean=0.000006 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.0557859 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 29 components and 0.0557859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076131Jy sigma=0.000647 ! Fit after self-cal, rms=0.076198Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076198Jy sigma=0.000647 ! Fit after self-cal, rms=0.078684Jy sigma=0.000644 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.652 mas, bmaj=5.199 mas, bpa=-12.17 degrees ! Estimated noise=578.984 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000165679 Jy ! Component: 100 - total flux cleaned = 0.000154725 Jy ! Component: 150 - total flux cleaned = 0.000145888 Jy ! Component: 200 - total flux cleaned = 0.000153304 Jy ! Total flux subtracted in 200 components = 0.000153304 Jy ! Clean residual min=-0.001567 max=0.001334 Jy/beam ! Clean residual mean=0.000001 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.0559392 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 37 components and 0.0559392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078680Jy sigma=0.000644 ! Fit after self-cal, rms=0.078820Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.43932e-05 Jy ! Component: 100 - total flux cleaned = 6.45549e-05 Jy ! Component: 150 - total flux cleaned = 5.70392e-05 Jy ! Component: 200 - total flux cleaned = 7.06483e-05 Jy ! Total flux subtracted in 200 components = 7.06483e-05 Jy ! Clean residual min=-0.001435 max=0.001301 Jy/beam ! Clean residual mean=0.000002 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.0560099 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.0560099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078818Jy sigma=0.000643 ! Fit after self-cal, rms=0.078821Jy sigma=0.000643 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078821Jy sigma=0.000643 ! Fit after self-cal, rms=0.080158Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.652 mas, bmaj=5.189 mas, bpa=-12.28 degrees ! Estimated noise=579.351 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000163316 Jy ! Component: 100 - total flux cleaned = 0.000163258 Jy ! Component: 150 - total flux cleaned = 0.00016994 Jy ! Component: 200 - total flux cleaned = 0.000169903 Jy ! Total flux subtracted in 200 components = 0.000169903 Jy ! Clean residual min=-0.001470 max=0.001292 Jy/beam ! Clean residual mean=0.000001 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.0561798 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 42 components and 0.0561798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080156Jy sigma=0.000643 ! Fit after self-cal, rms=0.080174Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.55395e-05 Jy ! Component: 100 - total flux cleaned = 2.92254e-05 Jy ! Component: 150 - total flux cleaned = 2.93002e-05 Jy ! Component: 200 - total flux cleaned = 3.48308e-05 Jy ! Total flux subtracted in 200 components = 3.48308e-05 Jy ! Clean residual min=-0.001507 max=0.001311 Jy/beam ! Clean residual mean=0.000001 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.0562146 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.0562146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080173Jy sigma=0.000643 ! Fit after self-cal, rms=0.080170Jy sigma=0.000643 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080170Jy sigma=0.000643 ! Fit after self-cal, rms=0.080373Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.846 mas, bmaj=8.469 mas, bpa=-5.627 degrees ! Estimated noise=723.551 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000304574 Jy ! Component: 100 - total flux cleaned = 0.000303371 Jy ! Component: 150 - total flux cleaned = 0.000298471 Jy ! Component: 200 - total flux cleaned = 0.000304922 Jy ! Total flux subtracted in 200 components = 0.000304922 Jy ! Clean residual min=-0.001742 max=0.001499 Jy/beam ! Clean residual mean=0.000001 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.0565195 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 46 components and 0.0565195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080373Jy sigma=0.000643 ! Fit after self-cal, rms=0.080378Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.89693e-05 Jy ! Component: 100 - total flux cleaned = 5.85362e-05 Jy ! Component: 150 - total flux cleaned = 6.58492e-05 Jy ! Component: 200 - total flux cleaned = 7.11888e-05 Jy ! Total flux subtracted in 200 components = 7.11888e-05 Jy ! Clean residual min=-0.001733 max=0.001513 Jy/beam ! Clean residual mean=0.000002 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.0565907 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 48 components and 0.0565907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080378Jy sigma=0.000643 ! Fit after self-cal, rms=0.080379Jy sigma=0.000643 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.652 mas, bmaj=5.178 mas, bpa=-12.3 degrees ! Estimated noise=579.669 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.652 x 5.178 at -12.3 degrees (North through East) ! Clean map min=-0.0014667 max=0.053494 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.131 mas, bmaj=4.408 mas, bpa=-13.66 degrees ! Estimated noise=988.149 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0419662 Jy ! Component: 100 - total flux cleaned = 0.0511572 Jy ! Component: 150 - total flux cleaned = 0.0542646 Jy ! Component: 200 - total flux cleaned = 0.0559873 Jy ! Total flux subtracted in 200 components = 0.0559873 Jy ! Clean residual min=-0.002668 max=0.002613 Jy/beam ! Clean residual mean=0.000000 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.0559873 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0559873 Jy ! Inverting map and beam ! Estimated beam: bmin=3.652 mas, bmaj=5.178 mas, bpa=-12.3 degrees ! Estimated noise=579.669 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000613872 Jy ! Component: 100 - total flux cleaned = 0.000655633 Jy ! Component: 150 - total flux cleaned = 0.000655025 Jy ! Component: 200 - total flux cleaned = 0.000655372 Jy ! Total flux subtracted in 200 components = 0.000655372 Jy ! Clean residual min=-0.001556 max=0.001332 Jy/beam ! Clean residual mean=0.000001 rms=0.000342 Jy/beam ! Combined flux in latest and established models = 0.0566427 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 18 components and 0.0566427 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.846 mas, bmaj=8.469 mas, bpa=-5.627 degrees ! Estimated noise=723.551 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000101315 Jy ! Component: 100 - total flux cleaned = 0.00010259 Jy ! Component: 150 - total flux cleaned = 9.97617e-05 Jy ! Component: 200 - total flux cleaned = 9.1464e-05 Jy ! Total flux subtracted in 200 components = 9.1464e-05 Jy ! Clean residual min=-0.001738 max=0.001520 Jy/beam ! Clean residual mean=0.000001 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.0567342 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.66068e-06 Jy ! Component: 100 - total flux cleaned = -6.91436e-06 Jy ! Component: 150 - total flux cleaned = -7.01696e-06 Jy ! Component: 200 - total flux cleaned = -7.15598e-06 Jy ! Total flux subtracted in 200 components = -7.15598e-06 Jy ! Clean residual min=-0.001739 max=0.001520 Jy/beam ! Clean residual mean=0.000001 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.056727 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 27 components and 0.056727 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.652 mas, bmaj=5.178 mas, bpa=-12.3 degrees ! Estimated noise=579.669 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.07485e-05 Jy ! Component: 100 - total flux cleaned = -5.94813e-05 Jy ! Component: 150 - total flux cleaned = -8.43947e-05 Jy ! Component: 200 - total flux cleaned = -9.9673e-05 Jy ! Total flux subtracted in 200 components = -9.9673e-05 Jy ! Clean residual min=-0.001537 max=0.001342 Jy/beam ! Clean residual mean=0.000001 rms=0.000341 Jy/beam ! Combined flux in latest and established models = 0.0566273 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 34 components and 0.0566273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080381Jy sigma=0.000643 ! Fit after self-cal, rms=0.080381Jy sigma=0.000643 wmodel J2358+4921_S_2017_03_27_pus_map.mod ! Writing 34 model components to file: J2358+4921_S_2017_03_27_pus_map.mod wobs J2358+4921_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J2358+4921_S_2017_03_27_pus_uvs.fits wwins J2358+4921_S_2017_03_27_pus_map.win ! wwins: Wrote 1 windows to J2358+4921_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000225492 Jy ! Component: 100 - total flux cleaned = -0.000366171 Jy ! Component: 150 - total flux cleaned = -0.000388651 Jy ! Component: 200 - total flux cleaned = -0.000388769 Jy ! Component: 250 - total flux cleaned = -0.000368066 Jy ! Component: 300 - total flux cleaned = -0.000286524 Jy ! Component: 350 - total flux cleaned = -0.000286152 Jy ! Component: 400 - total flux cleaned = -0.000227775 Jy ! Component: 450 - total flux cleaned = -0.00011346 Jy ! Component: 500 - total flux cleaned = -5.76439e-05 Jy ! Component: 550 - total flux cleaned = -1.804e-06 Jy ! Component: 600 - total flux cleaned = 0.000124807 Jy ! Component: 650 - total flux cleaned = 0.000160457 Jy ! Component: 700 - total flux cleaned = 0.000265922 Jy ! Component: 750 - total flux cleaned = 0.000300674 Jy ! Component: 800 - total flux cleaned = 0.000419713 Jy ! Component: 850 - total flux cleaned = 0.000453111 Jy ! Component: 900 - total flux cleaned = 0.000486474 Jy ! Component: 950 - total flux cleaned = 0.000552097 Jy ! Component: 1000 - total flux cleaned = 0.00060063 Jy ! Component: 1050 - total flux cleaned = 0.000648447 Jy ! Component: 1100 - total flux cleaned = 0.000679898 Jy ! Component: 1150 - total flux cleaned = 0.000711192 Jy ! Component: 1200 - total flux cleaned = 0.000757102 Jy ! Component: 1250 - total flux cleaned = 0.00075727 Jy ! Component: 1300 - total flux cleaned = 0.000817443 Jy ! Component: 1350 - total flux cleaned = 0.000832405 Jy ! Component: 1400 - total flux cleaned = 0.000846978 Jy ! Component: 1450 - total flux cleaned = 0.000890705 Jy ! Component: 1500 - total flux cleaned = 0.000962692 Jy ! Component: 1550 - total flux cleaned = 0.00100508 Jy ! Component: 1600 - total flux cleaned = 0.00101892 Jy ! Component: 1650 - total flux cleaned = 0.00104683 Jy ! Component: 1700 - total flux cleaned = 0.00100525 Jy ! Component: 1750 - total flux cleaned = 0.00103305 Jy ! Component: 1800 - total flux cleaned = 0.00108764 Jy ! Component: 1850 - total flux cleaned = 0.00112805 Jy ! Component: 1900 - total flux cleaned = 0.00116792 Jy ! Component: 1950 - total flux cleaned = 0.00116793 Jy ! Component: 2000 - total flux cleaned = 0.00124657 Jy ! Component: 2050 - total flux cleaned = 0.00124647 Jy ! Component: 2100 - total flux cleaned = 0.0012463 Jy ! Component: 2150 - total flux cleaned = 0.00132284 Jy ! Component: 2200 - total flux cleaned = 0.00128476 Jy ! Component: 2250 - total flux cleaned = 0.0013474 Jy ! Component: 2300 - total flux cleaned = 0.0013598 Jy ! Component: 2350 - total flux cleaned = 0.00140938 Jy ! Component: 2400 - total flux cleaned = 0.0014462 Jy ! Component: 2450 - total flux cleaned = 0.00150696 Jy ! Component: 2500 - total flux cleaned = 0.00150688 Jy ! Component: 2550 - total flux cleaned = 0.00155469 Jy ! Component: 2600 - total flux cleaned = 0.00157829 Jy ! Component: 2650 - total flux cleaned = 0.00161369 Jy ! Component: 2700 - total flux cleaned = 0.00155525 Jy ! Component: 2750 - total flux cleaned = 0.00160192 Jy ! Component: 2800 - total flux cleaned = 0.00165967 Jy ! Component: 2850 - total flux cleaned = 0.00163658 Jy ! Component: 2900 - total flux cleaned = 0.00165949 Jy ! Component: 2950 - total flux cleaned = 0.00167097 Jy ! Component: 3000 - total flux cleaned = 0.00168235 Jy ! Component: 3050 - total flux cleaned = 0.00163781 Jy ! Component: 3100 - total flux cleaned = 0.0017044 Jy ! Component: 3150 - total flux cleaned = 0.00168236 Jy ! Component: 3200 - total flux cleaned = 0.00170418 Jy ! Component: 3250 - total flux cleaned = 0.00173672 Jy ! Component: 3300 - total flux cleaned = 0.00173664 Jy ! Component: 3350 - total flux cleaned = 0.00173672 Jy ! Component: 3400 - total flux cleaned = 0.00181152 Jy ! Component: 3450 - total flux cleaned = 0.00181154 Jy ! Component: 3500 - total flux cleaned = 0.00179043 Jy ! Component: 3550 - total flux cleaned = 0.00177996 Jy ! Component: 3600 - total flux cleaned = 0.00176949 Jy ! Component: 3650 - total flux cleaned = 0.00177988 Jy ! Component: 3700 - total flux cleaned = 0.0017696 Jy ! Component: 3750 - total flux cleaned = 0.00177987 Jy ! Component: 3800 - total flux cleaned = 0.00175947 Jy ! Component: 3850 - total flux cleaned = 0.00173917 Jy ! Component: 3900 - total flux cleaned = 0.00178972 Jy ! Component: 3950 - total flux cleaned = 0.00174948 Jy ! Component: 4000 - total flux cleaned = 0.00176958 Jy ! Component: 4050 - total flux cleaned = 0.00178956 Jy ! Total flux subtracted in 4096 components = 0.00180938 Jy ! Clean residual min=-0.000557 max=0.000693 Jy/beam ! Clean residual mean=-0.000000 rms=0.000182 Jy/beam ! Combined flux in latest and established models = 0.0584367 Jy keep ! Adding 308 model components to the UV plane model. ! The established model now contains 342 components and 0.0584367 Jy ![Exited script file: muppet] wmap "J2358+4921_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.652 x 5.178 at -12.3 degrees (North through East) ! Clean map min=-0.00097447 max=0.053491 Jy/beam ! Writing clean map to FITS file: J2358+4921_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0534907 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000180532 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.0125 1.0125 2.02501 4.05002 8.10003 16.2001 32.4001 64.8002 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.053 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.652 x 5.178 at -12.3 degrees (North through East) ! Clean map min=-0.00097447 max=0.053491 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2358+4921_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:52:58 2019