! Started logfile: J2354-1513_S_2017_06_10_pus_uvs.log on Mon May 6 15:03:47 2019 obs J2354-1513_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J2354-1513_S_2017_06_10_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.691111 visibilities/baseline/integration-bin. ! Found source: J2354-1513 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 1244 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2354-1513_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.386064Jy sigma=0.003159 ! Fit after self-cal, rms=0.358728Jy sigma=0.002911 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.57 mas, bmaj=7.647 mas, bpa=-2.02 degrees ! Estimated noise=3649.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.507878 Jy ! Component: 100 - total flux cleaned = 0.623512 Jy ! Total flux subtracted in 100 components = 0.623512 Jy ! Clean residual min=-0.030956 max=0.054096 Jy/beam ! Clean residual mean=-0.000142 rms=0.010230 Jy/beam ! Combined flux in latest and established models = 0.623512 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.623512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150223Jy sigma=0.001230 ! Fit after self-cal, rms=0.150180Jy sigma=0.001229 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.079 mas, bmaj=8.259 mas, bpa=0.9852 degrees ! Estimated noise=2764.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0647184 Jy ! Component: 100 - total flux cleaned = 0.0948723 Jy ! Component: 150 - total flux cleaned = 0.10976 Jy ! Component: 200 - total flux cleaned = 0.116587 Jy ! Total flux subtracted in 200 components = 0.116587 Jy ! Clean residual min=-0.025766 max=0.042576 Jy/beam ! Clean residual mean=-0.000107 rms=0.008329 Jy/beam ! Combined flux in latest and established models = 0.740099 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 43 components and 0.740099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125629Jy sigma=0.000985 ! Fit after self-cal, rms=0.125504Jy sigma=0.000984 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.89 HN 1.14 KP 0.98 ! LA 0.94 MK 0.98 NL 0.98 OV 1.02 ! PT 0.98 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 1.17 KP 0.94 ! LA 0.92 MK 0.97 NL 1.21 OV 1.06 ! PT 0.95 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.22 KP 0.94 ! LA 0.93 MK 1.01 NL 1.32 OV 0.96 ! PT 0.93 SC 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.09 KP 1.00* ! LA 1.00* MK 0.96 NL 1.00* OV 1.00* ! PT 1.05 SC 1.00* ! ! ! Fit before self-cal, rms=0.125504Jy sigma=0.000984 ! Fit after self-cal, rms=0.097590Jy sigma=0.000718 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.089 mas, bmaj=8.296 mas, bpa=1.237 degrees ! Estimated noise=2760.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, 12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0180237 Jy ! Component: 100 - total flux cleaned = 0.0194583 Jy ! Component: 150 - total flux cleaned = 0.0192302 Jy ! Component: 200 - total flux cleaned = 0.0192184 Jy ! Total flux subtracted in 200 components = 0.0192184 Jy ! Clean residual min=-0.008852 max=0.009643 Jy/beam ! Clean residual mean=-0.000015 rms=0.002425 Jy/beam ! Combined flux in latest and established models = 0.759317 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 61 components and 0.759317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094194Jy sigma=0.000686 ! Fit after self-cal, rms=0.094147Jy sigma=0.000684 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094147Jy sigma=0.000684 ! Fit after self-cal, rms=0.093481Jy sigma=0.000681 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.081 mas, bmaj=8.296 mas, bpa=1.14 degrees ! Estimated noise=2750.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00516022 Jy ! Component: 100 - total flux cleaned = 0.00485597 Jy ! Component: 150 - total flux cleaned = 0.00463575 Jy ! Component: 200 - total flux cleaned = 0.00445414 Jy ! Total flux subtracted in 200 components = 0.00445414 Jy ! Clean residual min=-0.008043 max=0.008025 Jy/beam ! Clean residual mean=-0.000017 rms=0.002064 Jy/beam ! Combined flux in latest and established models = 0.763772 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 78 components and 0.763771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092974Jy sigma=0.000677 ! Fit after self-cal, rms=0.092936Jy sigma=0.000676 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000492505 Jy ! Component: 100 - total flux cleaned = 0.000339085 Jy ! Component: 150 - total flux cleaned = 0.000337768 Jy ! Component: 200 - total flux cleaned = 0.000339492 Jy ! Total flux subtracted in 200 components = 0.000339492 Jy ! Clean residual min=-0.007652 max=0.007427 Jy/beam ! Clean residual mean=-0.000017 rms=0.002003 Jy/beam ! Combined flux in latest and established models = 0.764111 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 85 components and 0.764111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092814Jy sigma=0.000675 ! Fit after self-cal, rms=0.092809Jy sigma=0.000675 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092809Jy sigma=0.000675 ! Fit after self-cal, rms=0.092678Jy sigma=0.000675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.08 mas, bmaj=8.299 mas, bpa=1.109 degrees ! Estimated noise=2746.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189854 Jy ! Component: 100 - total flux cleaned = 0.00196453 Jy ! Component: 150 - total flux cleaned = 0.00179661 Jy ! Component: 200 - total flux cleaned = 0.00169449 Jy ! Total flux subtracted in 200 components = 0.00169449 Jy ! Clean residual min=-0.007164 max=0.006950 Jy/beam ! Clean residual mean=-0.000016 rms=0.001939 Jy/beam ! Combined flux in latest and established models = 0.765805 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 97 components and 0.765805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092579Jy sigma=0.000674 ! Fit after self-cal, rms=0.092569Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000243679 Jy ! Component: 100 - total flux cleaned = 0.000153841 Jy ! Component: 150 - total flux cleaned = 6.93021e-05 Jy ! Component: 200 - total flux cleaned = -1.1477e-05 Jy ! Total flux subtracted in 200 components = -1.1477e-05 Jy ! Clean residual min=-0.007007 max=0.006682 Jy/beam ! Clean residual mean=-0.000016 rms=0.001922 Jy/beam ! Combined flux in latest and established models = 0.765794 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 104 components and 0.765794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092529Jy sigma=0.000674 ! Fit after self-cal, rms=0.092526Jy sigma=0.000674 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092526Jy sigma=0.000674 ! Fit after self-cal, rms=0.092490Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.319 mas, bmaj=19.25 mas, bpa=6.425 degrees ! Estimated noise=3472.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000269314 Jy ! Component: 100 - total flux cleaned = 0.000226033 Jy ! Component: 150 - total flux cleaned = 0.000108434 Jy ! Component: 200 - total flux cleaned = 1.27131e-06 Jy ! Total flux subtracted in 200 components = 1.27131e-06 Jy ! Clean residual min=-0.007974 max=0.006273 Jy/beam ! Clean residual mean=-0.000021 rms=0.002460 Jy/beam ! Combined flux in latest and established models = 0.765795 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 117 components and 0.765795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092481Jy sigma=0.000673 ! Fit after self-cal, rms=0.092477Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.44768e-05 Jy ! Component: 100 - total flux cleaned = -2.85208e-05 Jy ! Component: 150 - total flux cleaned = -0.000101156 Jy ! Component: 200 - total flux cleaned = -0.000170602 Jy ! Total flux subtracted in 200 components = -0.000170602 Jy ! Clean residual min=-0.007883 max=0.006237 Jy/beam ! Clean residual mean=-0.000022 rms=0.002455 Jy/beam ! Combined flux in latest and established models = 0.765625 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 122 components and 0.765624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092473Jy sigma=0.000673 ! Fit after self-cal, rms=0.092472Jy sigma=0.000673 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.081 mas, bmaj=8.301 mas, bpa=1.105 degrees ! Estimated noise=2745.88 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.081 x 8.301 at 1.105 degrees (North through East) ! Clean map min=-0.0091814 max=0.65829 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092472Jy sigma=0.000673 ! Fit after self-cal, rms=0.086370Jy sigma=0.000622 ! Inverting map and beam ! Estimated beam: bmin=3.08 mas, bmaj=8.304 mas, bpa=1.096 degrees ! Estimated noise=2743.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.09484e-05 Jy ! Component: 100 - total flux cleaned = -0.000225068 Jy ! Component: 150 - total flux cleaned = -0.000401508 Jy ! Component: 200 - total flux cleaned = -0.000521125 Jy ! Total flux subtracted in 200 components = -0.000521125 Jy ! Clean residual min=-0.006759 max=0.006308 Jy/beam ! Clean residual mean=-0.000016 rms=0.001872 Jy/beam ! Combined flux in latest and established models = 0.765103 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 137 components and 0.765103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086303Jy sigma=0.000622 ! Fit after self-cal, rms=0.086295Jy sigma=0.000622 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000146584 Jy ! Component: 100 - total flux cleaned = -0.000181451 Jy ! Component: 150 - total flux cleaned = -0.000215331 Jy ! Component: 200 - total flux cleaned = -0.000281471 Jy ! Total flux subtracted in 200 components = -0.000281471 Jy ! Clean residual min=-0.006772 max=0.006297 Jy/beam ! Clean residual mean=-0.000017 rms=0.001861 Jy/beam ! Combined flux in latest and established models = 0.764822 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 142 components and 0.764822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086270Jy sigma=0.000622 ! Fit after self-cal, rms=0.086267Jy sigma=0.000622 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086267Jy sigma=0.000622 ! Fit after self-cal, rms=0.086272Jy sigma=0.000622 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.588 mas, bmaj=7.643 mas, bpa=-1.625 degrees ! Estimated noise=3452.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.505886 Jy ! Component: 100 - total flux cleaned = 0.622262 Jy ! Component: 150 - total flux cleaned = 0.67335 Jy ! Component: 200 - total flux cleaned = 0.70304 Jy ! Total flux subtracted in 200 components = 0.70304 Jy ! Clean residual min=-0.011665 max=0.017377 Jy/beam ! Clean residual mean=-0.000065 rms=0.003664 Jy/beam ! Combined flux in latest and established models = 0.70304 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.70304 Jy ! Inverting map and beam ! Estimated beam: bmin=3.081 mas, bmaj=8.307 mas, bpa=1.091 degrees ! Estimated noise=2743.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0237508 Jy ! Component: 100 - total flux cleaned = 0.0373164 Jy ! Component: 150 - total flux cleaned = 0.0461049 Jy ! Component: 200 - total flux cleaned = 0.0522913 Jy ! Total flux subtracted in 200 components = 0.0522913 Jy ! Clean residual min=-0.008885 max=0.007774 Jy/beam ! Clean residual mean=-0.000033 rms=0.002200 Jy/beam ! Combined flux in latest and established models = 0.755332 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 71 components and 0.755332 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.322 mas, bmaj=19.26 mas, bpa=6.415 degrees ! Estimated noise=3467.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0057633 Jy ! Component: 100 - total flux cleaned = 0.00907781 Jy ! Component: 150 - total flux cleaned = 0.00981157 Jy ! Component: 200 - total flux cleaned = 0.00973258 Jy ! Total flux subtracted in 200 components = 0.00973258 Jy ! Clean residual min=-0.008018 max=0.006509 Jy/beam ! Clean residual mean=-0.000024 rms=0.002479 Jy/beam ! Combined flux in latest and established models = 0.765064 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.90625e-05 Jy ! Component: 100 - total flux cleaned = -6.90342e-05 Jy ! Component: 150 - total flux cleaned = -0.000133231 Jy ! Component: 200 - total flux cleaned = -0.000192211 Jy ! Total flux subtracted in 200 components = -0.000192211 Jy ! Clean residual min=-0.007734 max=0.006304 Jy/beam ! Clean residual mean=-0.000024 rms=0.002425 Jy/beam ! Combined flux in latest and established models = 0.764872 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 89 components and 0.764872 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.081 mas, bmaj=8.307 mas, bpa=1.091 degrees ! Estimated noise=2743.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155194 Jy ! Component: 100 - total flux cleaned = 0.00180859 Jy ! Component: 150 - total flux cleaned = 0.00195312 Jy ! Component: 200 - total flux cleaned = 0.002143 Jy ! Total flux subtracted in 200 components = 0.002143 Jy ! Clean residual min=-0.007884 max=0.007079 Jy/beam ! Clean residual mean=-0.000016 rms=0.001977 Jy/beam ! Combined flux in latest and established models = 0.767015 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 107 components and 0.767015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086585Jy sigma=0.000624 ! Fit after self-cal, rms=0.086527Jy sigma=0.000624 wmodel J2354-1513_S_2017_06_10_pus_map.mod ! Writing 107 model components to file: J2354-1513_S_2017_06_10_pus_map.mod wobs J2354-1513_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J2354-1513_S_2017_06_10_pus_uvs.fits wwins J2354-1513_S_2017_06_10_pus_map.win ! wwins: Wrote 2 windows to J2354-1513_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00236335 Jy ! Component: 100 - total flux cleaned = -0.00392858 Jy ! Component: 150 - total flux cleaned = -0.00447669 Jy ! Component: 200 - total flux cleaned = -0.00488621 Jy ! Component: 250 - total flux cleaned = -0.00517923 Jy ! Component: 300 - total flux cleaned = -0.00546142 Jy ! Component: 350 - total flux cleaned = -0.00590402 Jy ! Component: 400 - total flux cleaned = -0.00607106 Jy ! Component: 450 - total flux cleaned = -0.00615171 Jy ! Component: 500 - total flux cleaned = -0.00638864 Jy ! Component: 550 - total flux cleaned = -0.0063894 Jy ! Component: 600 - total flux cleaned = -0.00668548 Jy ! Component: 650 - total flux cleaned = -0.00690022 Jy ! Component: 700 - total flux cleaned = -0.00710918 Jy ! Component: 750 - total flux cleaned = -0.00737836 Jy ! Component: 800 - total flux cleaned = -0.00770431 Jy ! Component: 850 - total flux cleaned = -0.00776751 Jy ! Component: 900 - total flux cleaned = -0.0080781 Jy ! Component: 950 - total flux cleaned = -0.00837871 Jy ! Component: 1000 - total flux cleaned = -0.00861258 Jy ! Component: 1050 - total flux cleaned = -0.00895583 Jy ! Component: 1100 - total flux cleaned = -0.00918021 Jy ! Component: 1150 - total flux cleaned = -0.00950854 Jy ! Component: 1200 - total flux cleaned = -0.00972356 Jy ! Component: 1250 - total flux cleaned = -0.0100382 Jy ! Component: 1300 - total flux cleaned = -0.0102936 Jy ! Component: 1350 - total flux cleaned = -0.0104439 Jy ! Component: 1400 - total flux cleaned = -0.0107866 Jy ! Component: 1450 - total flux cleaned = -0.0109783 Jy ! Component: 1500 - total flux cleaned = -0.0113076 Jy ! Component: 1550 - total flux cleaned = -0.0115382 Jy ! Component: 1600 - total flux cleaned = -0.0117202 Jy ! Component: 1650 - total flux cleaned = -0.0119877 Jy ! Component: 1700 - total flux cleaned = -0.0121621 Jy ! Component: 1750 - total flux cleaned = -0.0123335 Jy ! Component: 1800 - total flux cleaned = -0.0125013 Jy ! Component: 1850 - total flux cleaned = -0.0125008 Jy ! Component: 1900 - total flux cleaned = -0.0126232 Jy ! Component: 1950 - total flux cleaned = -0.0127037 Jy ! Component: 2000 - total flux cleaned = -0.0127827 Jy ! Component: 2050 - total flux cleaned = -0.0127828 Jy ! Component: 2100 - total flux cleaned = -0.0128213 Jy ! Component: 2150 - total flux cleaned = -0.0128216 Jy ! Component: 2200 - total flux cleaned = -0.0128217 Jy ! Component: 2250 - total flux cleaned = -0.012822 Jy ! Component: 2300 - total flux cleaned = -0.0128219 Jy ! Component: 2350 - total flux cleaned = -0.0127853 Jy ! Component: 2400 - total flux cleaned = -0.0126419 Jy ! Component: 2450 - total flux cleaned = -0.0126419 Jy ! Component: 2500 - total flux cleaned = -0.0125717 Jy ! Component: 2550 - total flux cleaned = -0.0125366 Jy ! Component: 2600 - total flux cleaned = -0.0123983 Jy ! Component: 2650 - total flux cleaned = -0.0123984 Jy ! Component: 2700 - total flux cleaned = -0.0123982 Jy ! Component: 2750 - total flux cleaned = -0.012229 Jy ! Component: 2800 - total flux cleaned = -0.0121621 Jy ! Component: 2850 - total flux cleaned = -0.0121288 Jy ! Component: 2900 - total flux cleaned = -0.0121289 Jy ! Component: 2950 - total flux cleaned = -0.0120958 Jy ! Component: 3000 - total flux cleaned = -0.0121618 Jy ! Component: 3050 - total flux cleaned = -0.0120964 Jy ! Component: 3100 - total flux cleaned = -0.0120965 Jy ! Component: 3150 - total flux cleaned = -0.012129 Jy ! Component: 3200 - total flux cleaned = -0.012129 Jy ! Component: 3250 - total flux cleaned = -0.0121612 Jy ! Component: 3300 - total flux cleaned = -0.0121613 Jy ! Component: 3350 - total flux cleaned = -0.0122253 Jy ! Component: 3400 - total flux cleaned = -0.0122893 Jy ! Component: 3450 - total flux cleaned = -0.0122893 Jy ! Component: 3500 - total flux cleaned = -0.0123533 Jy ! Component: 3550 - total flux cleaned = -0.0124173 Jy ! Component: 3600 - total flux cleaned = -0.0125131 Jy ! Component: 3650 - total flux cleaned = -0.0125768 Jy ! Component: 3700 - total flux cleaned = -0.0125449 Jy ! Component: 3750 - total flux cleaned = -0.0126089 Jy ! Component: 3800 - total flux cleaned = -0.0126727 Jy ! Component: 3850 - total flux cleaned = -0.0126407 Jy ! Component: 3900 - total flux cleaned = -0.0126405 Jy ! Component: 3950 - total flux cleaned = -0.0126725 Jy ! Component: 4000 - total flux cleaned = -0.0125764 Jy ! Component: 4050 - total flux cleaned = -0.0126406 Jy ! Total flux subtracted in 4096 components = -0.0126729 Jy ! Clean residual min=-0.002084 max=0.001697 Jy/beam ! Clean residual mean=-0.000003 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.754342 Jy keep ! Adding 233 model components to the UV plane model. ! The established model now contains 340 components and 0.754342 Jy ![Exited script file: muppet] wmap "J2354-1513_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.081 x 8.307 at 1.091 degrees (North through East) ! Clean map min=-0.0060287 max=0.6563 Jy/beam ! Writing clean map to FITS file: J2354-1513_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.656303 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0005077 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.232073 0.232073 0.464146 0.928292 1.85658 3.71317 7.42633 14.8527 29.7053 59.4107 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.656 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.081 x 8.307 at 1.091 degrees (North through East) ! Clean map min=-0.0060287 max=0.6563 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2354-1513_S_2017_06_10_pus_uvs.log closed on Mon May 6 15:03:51 2019