! Started logfile: J2354-1513_S_2017_02_24_pus_uvs.log on Sat May 4 11:39:08 2019 obs J2354-1513_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J2354-1513_S_2017_02_24_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.608333 visibilities/baseline/integration-bin. ! Found source: J2354-1513 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 1752 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2354-1513_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 74 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.267124Jy sigma=0.001881 ! Fit after self-cal, rms=0.249023Jy sigma=0.001751 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.762 mas, bmaj=11.4 mas, bpa=-2.328 degrees ! Estimated noise=3359.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.58893 Jy ! Component: 100 - total flux cleaned = 0.718458 Jy ! Total flux subtracted in 100 components = 0.718458 Jy ! Clean residual min=-0.025252 max=0.041169 Jy/beam ! Clean residual mean=-0.000334 rms=0.007594 Jy/beam ! Combined flux in latest and established models = 0.718458 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.718458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145784Jy sigma=0.000978 ! Fit after self-cal, rms=0.145744Jy sigma=0.000978 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.855 mas, bmaj=12.98 mas, bpa=-0.5783 degrees ! Estimated noise=2630.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0635972 Jy ! Component: 100 - total flux cleaned = 0.0908852 Jy ! Component: 150 - total flux cleaned = 0.105922 Jy ! Component: 200 - total flux cleaned = 0.114629 Jy ! Total flux subtracted in 200 components = 0.114629 Jy ! Clean residual min=-0.014770 max=0.020250 Jy/beam ! Clean residual mean=-0.000107 rms=0.003856 Jy/beam ! Combined flux in latest and established models = 0.833087 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 44 components and 0.833087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117386Jy sigma=0.000786 ! Fit after self-cal, rms=0.117210Jy sigma=0.000786 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.97 HN 1.04 KP 0.98 ! LA 0.97 MK 1.00* NL 0.98 OV 1.08 ! PT 1.01 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.92 HN 1.06 KP 0.94 ! LA 0.94 MK 1.00* NL 0.95 OV 1.08 ! PT 0.97 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.96 HN 1.02 KP 1.00 ! LA 1.01 MK 1.00* NL 1.08 OV 1.00 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.02 HN 0.94 KP 1.00* ! LA 1.00 MK 1.00* NL 1.00* OV 1.03 ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.117210Jy sigma=0.000786 ! Fit after self-cal, rms=0.103165Jy sigma=0.000693 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.86 mas, bmaj=12.96 mas, bpa=-0.3489 degrees ! Estimated noise=2628.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, 14.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115472 Jy ! Component: 100 - total flux cleaned = 0.0121091 Jy ! Component: 150 - total flux cleaned = 0.0111354 Jy ! Component: 200 - total flux cleaned = 0.0104516 Jy ! Total flux subtracted in 200 components = 0.0104516 Jy ! Clean residual min=-0.007278 max=0.010060 Jy/beam ! Clean residual mean=0.000034 rms=0.002240 Jy/beam ! Combined flux in latest and established models = 0.843538 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 63 components and 0.843538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101606Jy sigma=0.000684 ! Fit after self-cal, rms=0.101390Jy sigma=0.000682 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101390Jy sigma=0.000682 ! Fit after self-cal, rms=0.100833Jy sigma=0.000681 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.856 mas, bmaj=12.94 mas, bpa=-0.294 degrees ! Estimated noise=2627.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0065218 Jy ! Component: 100 - total flux cleaned = 0.0066595 Jy ! Component: 150 - total flux cleaned = 0.00634039 Jy ! Component: 200 - total flux cleaned = 0.00624382 Jy ! Total flux subtracted in 200 components = 0.00624382 Jy ! Clean residual min=-0.006687 max=0.007596 Jy/beam ! Clean residual mean=0.000026 rms=0.001911 Jy/beam ! Combined flux in latest and established models = 0.849782 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 82 components and 0.849782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100329Jy sigma=0.000678 ! Fit after self-cal, rms=0.100251Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000727741 Jy ! Component: 100 - total flux cleaned = 0.000820493 Jy ! Component: 150 - total flux cleaned = 0.000743507 Jy ! Component: 200 - total flux cleaned = 0.00059408 Jy ! Total flux subtracted in 200 components = 0.00059408 Jy ! Clean residual min=-0.006993 max=0.006739 Jy/beam ! Clean residual mean=0.000025 rms=0.001861 Jy/beam ! Combined flux in latest and established models = 0.850376 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 98 components and 0.850376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100102Jy sigma=0.000676 ! Fit after self-cal, rms=0.100081Jy sigma=0.000676 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100081Jy sigma=0.000676 ! Fit after self-cal, rms=0.098415Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.856 mas, bmaj=12.92 mas, bpa=-0.2558 degrees ! Estimated noise=2628.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00380601 Jy ! Component: 100 - total flux cleaned = 0.00423877 Jy ! Component: 150 - total flux cleaned = 0.00431152 Jy ! Component: 200 - total flux cleaned = 0.00424707 Jy ! Total flux subtracted in 200 components = 0.00424707 Jy ! Clean residual min=-0.005464 max=0.006198 Jy/beam ! Clean residual mean=0.000024 rms=0.001532 Jy/beam ! Combined flux in latest and established models = 0.854623 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 114 components and 0.854623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098221Jy sigma=0.000665 ! Fit after self-cal, rms=0.098189Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000941964 Jy ! Component: 100 - total flux cleaned = 0.0010016 Jy ! Component: 150 - total flux cleaned = 0.000947148 Jy ! Component: 200 - total flux cleaned = 0.000947074 Jy ! Total flux subtracted in 200 components = 0.000947074 Jy ! Clean residual min=-0.005290 max=0.006166 Jy/beam ! Clean residual mean=0.000025 rms=0.001506 Jy/beam ! Combined flux in latest and established models = 0.85557 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 123 components and 0.85557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098122Jy sigma=0.000664 ! Fit after self-cal, rms=0.098116Jy sigma=0.000664 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098116Jy sigma=0.000664 ! Fit after self-cal, rms=0.097946Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.849 mas, bmaj=17.37 mas, bpa=-10.52 degrees ! Estimated noise=2988.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174957 Jy ! Component: 100 - total flux cleaned = 0.001875 Jy ! Component: 150 - total flux cleaned = 0.00177893 Jy ! Component: 200 - total flux cleaned = 0.00165167 Jy ! Total flux subtracted in 200 components = 0.00165167 Jy ! Clean residual min=-0.006115 max=0.005450 Jy/beam ! Clean residual mean=0.000035 rms=0.001665 Jy/beam ! Combined flux in latest and established models = 0.857222 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 141 components and 0.857222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097903Jy sigma=0.000664 ! Fit after self-cal, rms=0.097888Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000607665 Jy ! Component: 100 - total flux cleaned = 0.000726413 Jy ! Component: 150 - total flux cleaned = 0.000689653 Jy ! Component: 200 - total flux cleaned = 0.000655463 Jy ! Total flux subtracted in 200 components = 0.000655463 Jy ! Clean residual min=-0.006049 max=0.005052 Jy/beam ! Clean residual mean=0.000034 rms=0.001635 Jy/beam ! Combined flux in latest and established models = 0.857878 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 163 components and 0.857878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097874Jy sigma=0.000663 ! Fit after self-cal, rms=0.097868Jy sigma=0.000663 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.857 mas, bmaj=12.92 mas, bpa=-0.2455 degrees ! Estimated noise=2628.39 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.857 x 12.92 at -0.2455 degrees (North through East) ! Clean map min=-0.0052326 max=0.7602 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097868Jy sigma=0.000663 ! Fit after self-cal, rms=0.090845Jy sigma=0.000614 ! Inverting map and beam ! Estimated beam: bmin=4.856 mas, bmaj=12.91 mas, bpa=-0.2212 degrees ! Estimated noise=2627.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141057 Jy ! Component: 100 - total flux cleaned = 0.00173359 Jy ! Component: 150 - total flux cleaned = 0.00168078 Jy ! Component: 200 - total flux cleaned = 0.00163177 Jy ! Total flux subtracted in 200 components = 0.00163177 Jy ! Clean residual min=-0.005405 max=0.005910 Jy/beam ! Clean residual mean=0.000022 rms=0.001400 Jy/beam ! Combined flux in latest and established models = 0.859509 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 180 components and 0.859509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090758Jy sigma=0.000613 ! Fit after self-cal, rms=0.090755Jy sigma=0.000613 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000337058 Jy ! Component: 100 - total flux cleaned = 0.000336693 Jy ! Component: 150 - total flux cleaned = 0.000296791 Jy ! Component: 200 - total flux cleaned = 0.00033671 Jy ! Total flux subtracted in 200 components = 0.00033671 Jy ! Clean residual min=-0.005358 max=0.005943 Jy/beam ! Clean residual mean=0.000022 rms=0.001389 Jy/beam ! Combined flux in latest and established models = 0.859846 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 187 components and 0.859846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090716Jy sigma=0.000613 ! Fit after self-cal, rms=0.090715Jy sigma=0.000613 ! Inverting map ! Added new window around map position (-97.5, 63.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00254678 Jy ! Component: 100 - total flux cleaned = 0.00198123 Jy ! Component: 150 - total flux cleaned = 0.00137119 Jy ! Component: 200 - total flux cleaned = 0.00110601 Jy ! Total flux subtracted in 200 components = 0.00110601 Jy ! Clean residual min=-0.004830 max=0.004802 Jy/beam ! Clean residual mean=0.000033 rms=0.001320 Jy/beam ! Combined flux in latest and established models = 0.860952 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 210 components and 0.860952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090398Jy sigma=0.000611 ! Fit after self-cal, rms=0.090378Jy sigma=0.000611 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090378Jy sigma=0.000611 ! Fit after self-cal, rms=0.090324Jy sigma=0.000610 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.762 mas, bmaj=11.36 mas, bpa=-2.057 degrees ! Estimated noise=3377.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.591931 Jy ! Component: 100 - total flux cleaned = 0.724525 Jy ! Component: 150 - total flux cleaned = 0.772767 Jy ! Component: 200 - total flux cleaned = 0.800502 Jy ! Total flux subtracted in 200 components = 0.800502 Jy ! Clean residual min=-0.014156 max=0.014296 Jy/beam ! Clean residual mean=-0.000112 rms=0.003305 Jy/beam ! Combined flux in latest and established models = 0.800502 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.800502 Jy ! Inverting map and beam ! Estimated beam: bmin=4.857 mas, bmaj=12.91 mas, bpa=-0.2262 degrees ! Estimated noise=2628.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0235974 Jy ! Component: 100 - total flux cleaned = 0.0366509 Jy ! Component: 150 - total flux cleaned = 0.0454664 Jy ! Component: 200 - total flux cleaned = 0.0519932 Jy ! Total flux subtracted in 200 components = 0.0519932 Jy ! Clean residual min=-0.006207 max=0.006213 Jy/beam ! Clean residual mean=0.000009 rms=0.001679 Jy/beam ! Combined flux in latest and established models = 0.852495 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 86 components and 0.852495 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.85 mas, bmaj=17.34 mas, bpa=-10.5 degrees ! Estimated noise=2989.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00556639 Jy ! Component: 100 - total flux cleaned = 0.00799135 Jy ! Component: 150 - total flux cleaned = 0.00897961 Jy ! Component: 200 - total flux cleaned = 0.00934057 Jy ! Total flux subtracted in 200 components = 0.00934057 Jy ! Clean residual min=-0.006078 max=0.005225 Jy/beam ! Clean residual mean=0.000048 rms=0.001603 Jy/beam ! Combined flux in latest and established models = 0.861836 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000235024 Jy ! Component: 100 - total flux cleaned = 0.000376153 Jy ! Component: 150 - total flux cleaned = 0.000561687 Jy ! Component: 200 - total flux cleaned = 0.000616671 Jy ! Total flux subtracted in 200 components = 0.000616671 Jy ! Clean residual min=-0.005668 max=0.005144 Jy/beam ! Clean residual mean=0.000050 rms=0.001549 Jy/beam ! Combined flux in latest and established models = 0.862453 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 146 components and 0.862453 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.857 mas, bmaj=12.91 mas, bpa=-0.2262 degrees ! Estimated noise=2628.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00037433 Jy ! Component: 100 - total flux cleaned = 0.000370644 Jy ! Component: 150 - total flux cleaned = 0.000459311 Jy ! Component: 200 - total flux cleaned = 0.00054028 Jy ! Total flux subtracted in 200 components = 0.00054028 Jy ! Clean residual min=-0.005203 max=0.005095 Jy/beam ! Clean residual mean=0.000030 rms=0.001372 Jy/beam ! Combined flux in latest and established models = 0.862993 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 165 components and 0.862993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090595Jy sigma=0.000612 ! Fit after self-cal, rms=0.090561Jy sigma=0.000612 wmodel J2354-1513_S_2017_02_24_pus_map.mod ! Writing 165 model components to file: J2354-1513_S_2017_02_24_pus_map.mod wobs J2354-1513_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J2354-1513_S_2017_02_24_pus_uvs.fits wwins J2354-1513_S_2017_02_24_pus_map.win ! wwins: Wrote 3 windows to J2354-1513_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000866235 Jy ! Component: 100 - total flux cleaned = -0.0014828 Jy ! Component: 150 - total flux cleaned = -0.00165158 Jy ! Component: 200 - total flux cleaned = -0.00133958 Jy ! Component: 250 - total flux cleaned = -0.000817849 Jy ! Component: 300 - total flux cleaned = -0.000388873 Jy ! Component: 350 - total flux cleaned = -0.000182097 Jy ! Component: 400 - total flux cleaned = 1.63661e-05 Jy ! Component: 450 - total flux cleaned = 8.05063e-05 Jy ! Component: 500 - total flux cleaned = 0.000265836 Jy ! Component: 550 - total flux cleaned = 0.000504675 Jy ! Component: 600 - total flux cleaned = 0.000733953 Jy ! Component: 650 - total flux cleaned = 0.000789463 Jy ! Component: 700 - total flux cleaned = 0.00111555 Jy ! Component: 750 - total flux cleaned = 0.00116758 Jy ! Component: 800 - total flux cleaned = 0.00127187 Jy ! Component: 850 - total flux cleaned = 0.0014235 Jy ! Component: 900 - total flux cleaned = 0.00142195 Jy ! Component: 950 - total flux cleaned = 0.00171334 Jy ! Component: 1000 - total flux cleaned = 0.00195292 Jy ! Component: 1050 - total flux cleaned = 0.00232676 Jy ! Component: 1100 - total flux cleaned = 0.00255608 Jy ! Component: 1150 - total flux cleaned = 0.00273598 Jy ! Component: 1200 - total flux cleaned = 0.00278111 Jy ! Component: 1250 - total flux cleaned = 0.00299944 Jy ! Component: 1300 - total flux cleaned = 0.00317007 Jy ! Component: 1350 - total flux cleaned = 0.00325382 Jy ! Component: 1400 - total flux cleaned = 0.00329493 Jy ! Component: 1450 - total flux cleaned = 0.00337719 Jy ! Component: 1500 - total flux cleaned = 0.00341753 Jy ! Component: 1550 - total flux cleaned = 0.00353628 Jy ! Component: 1600 - total flux cleaned = 0.00345804 Jy ! Component: 1650 - total flux cleaned = 0.00353481 Jy ! Component: 1700 - total flux cleaned = 0.00357258 Jy ! Component: 1750 - total flux cleaned = 0.00364766 Jy ! Component: 1800 - total flux cleaned = 0.00383197 Jy ! Component: 1850 - total flux cleaned = 0.00383152 Jy ! Component: 1900 - total flux cleaned = 0.00393949 Jy ! Component: 1950 - total flux cleaned = 0.0039749 Jy ! Component: 2000 - total flux cleaned = 0.00415026 Jy ! Component: 2050 - total flux cleaned = 0.00411584 Jy ! Component: 2100 - total flux cleaned = 0.00425319 Jy ! Component: 2150 - total flux cleaned = 0.00435516 Jy ! Component: 2200 - total flux cleaned = 0.00445574 Jy ! Component: 2250 - total flux cleaned = 0.00452227 Jy ! Component: 2300 - total flux cleaned = 0.00462097 Jy ! Component: 2350 - total flux cleaned = 0.00465343 Jy ! Component: 2400 - total flux cleaned = 0.00458855 Jy ! Component: 2450 - total flux cleaned = 0.00462077 Jy ! Component: 2500 - total flux cleaned = 0.00462074 Jy ! Component: 2550 - total flux cleaned = 0.00452624 Jy ! Component: 2600 - total flux cleaned = 0.00455717 Jy ! Component: 2650 - total flux cleaned = 0.00434033 Jy ! Component: 2700 - total flux cleaned = 0.00437123 Jy ! Component: 2750 - total flux cleaned = 0.00427997 Jy ! Component: 2800 - total flux cleaned = 0.00418936 Jy ! Component: 2850 - total flux cleaned = 0.00412953 Jy ! Component: 2900 - total flux cleaned = 0.00407001 Jy ! Component: 2950 - total flux cleaned = 0.00398171 Jy ! Component: 3000 - total flux cleaned = 0.00398163 Jy ! Component: 3050 - total flux cleaned = 0.00383616 Jy ! Component: 3100 - total flux cleaned = 0.003865 Jy ! Component: 3150 - total flux cleaned = 0.00372141 Jy ! Component: 3200 - total flux cleaned = 0.00363561 Jy ! Component: 3250 - total flux cleaned = 0.00355054 Jy ! Component: 3300 - total flux cleaned = 0.00355033 Jy ! Component: 3350 - total flux cleaned = 0.00338263 Jy ! Component: 3400 - total flux cleaned = 0.00318827 Jy ! Component: 3450 - total flux cleaned = 0.00310546 Jy ! Component: 3500 - total flux cleaned = 0.00296812 Jy ! Component: 3550 - total flux cleaned = 0.00277711 Jy ! Component: 3600 - total flux cleaned = 0.00266889 Jy ! Component: 3650 - total flux cleaned = 0.00258795 Jy ! Component: 3700 - total flux cleaned = 0.00245385 Jy ! Component: 3750 - total flux cleaned = 0.00226733 Jy ! Component: 3800 - total flux cleaned = 0.00216161 Jy ! Component: 3850 - total flux cleaned = 0.00202994 Jy ! Component: 3900 - total flux cleaned = 0.00200374 Jy ! Component: 3950 - total flux cleaned = 0.00187338 Jy ! Component: 4000 - total flux cleaned = 0.00166616 Jy ! Component: 4050 - total flux cleaned = 0.00158909 Jy ! Total flux subtracted in 4096 components = 0.00140997 Jy ! Clean residual min=-0.001494 max=0.001431 Jy/beam ! Clean residual mean=0.000004 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.864403 Jy keep ! Adding 256 model components to the UV plane model. ! The established model now contains 421 components and 0.864403 Jy ![Exited script file: muppet] wmap "J2354-1513_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.857 x 12.91 at -0.2262 degrees (North through East) ! Clean map min=-0.0037948 max=0.75745 Jy/beam ! Writing clean map to FITS file: J2354-1513_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.757449 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000478664 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.189583 0.189583 0.379165 0.75833 1.51666 3.03332 6.06664 12.1333 24.2666 48.5331 97.0663 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.757 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.857 x 12.91 at -0.2262 degrees (North through East) ! Clean map min=-0.0037948 max=0.75745 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2354-1513_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:39:12 2019