! Started logfile: J2353-2743_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:26:48 2019 obs J2353-2743_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J2353-2743_S_2017_01_16_pus_uva.fits ! AN table 1: 94 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.691962 visibilities/baseline/integration-bin. ! Found source: J2353-2743 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 11708 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2353-2743_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 153 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 153 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 153 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 247 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.008192Jy sigma=0.005862 ! Fit after self-cal, rms=0.941684Jy sigma=0.005519 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.121 mas, bmaj=11.87 mas, bpa=11.8 degrees ! Estimated noise=1904.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0508084 Jy ! Component: 100 - total flux cleaned = 0.0619338 Jy ! Total flux subtracted in 100 components = 0.0619338 Jy ! Clean residual min=-0.005160 max=0.005009 Jy/beam ! Clean residual mean=-0.000004 rms=0.001377 Jy/beam ! Combined flux in latest and established models = 0.0619338 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0619338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135840Jy sigma=0.000646 ! Fit after self-cal, rms=0.134278Jy sigma=0.000637 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.853 mas, bmaj=13.9 mas, bpa=12.05 degrees ! Estimated noise=1195.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00323207 Jy ! Component: 100 - total flux cleaned = 0.00265551 Jy ! Component: 150 - total flux cleaned = 0.00237723 Jy ! Component: 200 - total flux cleaned = 0.00213595 Jy ! Total flux subtracted in 200 components = 0.00213595 Jy ! Clean residual min=-0.003554 max=0.003863 Jy/beam ! Clean residual mean=-0.000017 rms=0.001024 Jy/beam ! Combined flux in latest and established models = 0.0640697 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 15 components and 0.0640697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133889Jy sigma=0.000637 ! Fit after self-cal, rms=0.133771Jy sigma=0.000636 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.76 FD 1.08 HN 0.93 KP 1.18 ! LA 1.09 MK 1.00* NL 0.96 OV 1.25 ! PT 0.99 SC 0.83 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 1.02 KP 1.08 ! LA 0.97 MK 1.00* NL 0.99 OV 1.15 ! PT 0.92 SC 1.15 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.19 HN 1.03 KP 1.13 ! LA 0.99 MK 1.00* NL 0.99 OV 0.98 ! PT 0.90 SC 1.06 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 1.04 HN 0.92 KP 0.91 ! LA 0.91 MK 1.00* NL 1.00* OV 1.00 ! PT 0.85 SC 0.71 ! ! ! Fit before self-cal, rms=0.133771Jy sigma=0.000636 ! Fit after self-cal, rms=0.119262Jy sigma=0.000633 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.802 mas, bmaj=13.85 mas, bpa=12.4 degrees ! Estimated noise=1183.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116425 Jy ! Component: 100 - total flux cleaned = 0.00123048 Jy ! Component: 150 - total flux cleaned = 0.00123145 Jy ! Component: 200 - total flux cleaned = 0.00123145 Jy ! Total flux subtracted in 200 components = 0.00123145 Jy ! Clean residual min=-0.003297 max=0.004037 Jy/beam ! Clean residual mean=-0.000004 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 0.0653012 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 24 components and 0.0653012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119206Jy sigma=0.000633 ! Fit after self-cal, rms=0.118908Jy sigma=0.000632 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118908Jy sigma=0.000632 ! Fit after self-cal, rms=0.117787Jy sigma=0.000630 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.734 mas, bmaj=13.64 mas, bpa=13.32 degrees ! Estimated noise=1183.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126168 Jy ! Component: 100 - total flux cleaned = 0.00129638 Jy ! Component: 150 - total flux cleaned = 0.00138439 Jy ! Component: 200 - total flux cleaned = 0.00145808 Jy ! Total flux subtracted in 200 components = 0.00145808 Jy ! Clean residual min=-0.002664 max=0.003364 Jy/beam ! Clean residual mean=-0.000004 rms=0.000738 Jy/beam ! Combined flux in latest and established models = 0.0667593 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 40 components and 0.0667593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117757Jy sigma=0.000630 ! Fit after self-cal, rms=0.118087Jy sigma=0.000629 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000366993 Jy ! Component: 100 - total flux cleaned = -0.000479713 Jy ! Component: 150 - total flux cleaned = -0.000587606 Jy ! Component: 200 - total flux cleaned = -0.000603684 Jy ! Total flux subtracted in 200 components = -0.000603684 Jy ! Clean residual min=-0.002556 max=0.002933 Jy/beam ! Clean residual mean=-0.000004 rms=0.000714 Jy/beam ! Combined flux in latest and established models = 0.0661556 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 52 components and 0.0661556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118082Jy sigma=0.000628 ! Fit after self-cal, rms=0.118078Jy sigma=0.000628 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118078Jy sigma=0.000628 ! Fit after self-cal, rms=0.121492Jy sigma=0.000628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.703 mas, bmaj=13.55 mas, bpa=13.57 degrees ! Estimated noise=1191.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107929 Jy ! Component: 100 - total flux cleaned = 0.00130674 Jy ! Component: 150 - total flux cleaned = 0.00138252 Jy ! Component: 200 - total flux cleaned = 0.00141439 Jy ! Total flux subtracted in 200 components = 0.00141439 Jy ! Clean residual min=-0.002578 max=0.003033 Jy/beam ! Clean residual mean=-0.000004 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.06757 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 61 components and 0.06757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121471Jy sigma=0.000628 ! Fit after self-cal, rms=0.121730Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000222995 Jy ! Component: 100 - total flux cleaned = -0.000204263 Jy ! Component: 150 - total flux cleaned = -0.00018799 Jy ! Component: 200 - total flux cleaned = -0.000172738 Jy ! Total flux subtracted in 200 components = -0.000172738 Jy ! Clean residual min=-0.002610 max=0.002805 Jy/beam ! Clean residual mean=-0.000005 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.0673972 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 70 components and 0.0673972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121723Jy sigma=0.000628 ! Fit after self-cal, rms=0.121742Jy sigma=0.000628 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121742Jy sigma=0.000628 ! Fit after self-cal, rms=0.124229Jy sigma=0.000628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.817 mas, bmaj=19.08 mas, bpa=5.168 degrees ! Estimated noise=1479.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108775 Jy ! Component: 100 - total flux cleaned = 0.00132558 Jy ! Component: 150 - total flux cleaned = 0.00137185 Jy ! Component: 200 - total flux cleaned = 0.00141005 Jy ! Total flux subtracted in 200 components = 0.00141005 Jy ! Clean residual min=-0.002592 max=0.003079 Jy/beam ! Clean residual mean=-0.000009 rms=0.000900 Jy/beam ! Combined flux in latest and established models = 0.0688073 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 73 components and 0.0688073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124214Jy sigma=0.000628 ! Fit after self-cal, rms=0.124361Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00020502 Jy ! Component: 100 - total flux cleaned = -0.000170461 Jy ! Component: 150 - total flux cleaned = -0.000124874 Jy ! Component: 200 - total flux cleaned = -8.61868e-05 Jy ! Total flux subtracted in 200 components = -8.61868e-05 Jy ! Clean residual min=-0.002686 max=0.003136 Jy/beam ! Clean residual mean=-0.000010 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 0.0687211 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 77 components and 0.0687211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124357Jy sigma=0.000628 ! Fit after self-cal, rms=0.124373Jy sigma=0.000628 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.683 mas, bmaj=13.46 mas, bpa=13.74 degrees ! Estimated noise=1199.94 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.683 x 13.46 at 13.74 degrees (North through East) ! Clean map min=-0.0026006 max=0.066921 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.032 mas, bmaj=11.61 mas, bpa=13.17 degrees ! Estimated noise=1849.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0522354 Jy ! Component: 100 - total flux cleaned = 0.0638398 Jy ! Component: 150 - total flux cleaned = 0.0661239 Jy ! Component: 200 - total flux cleaned = 0.0669391 Jy ! Total flux subtracted in 200 components = 0.0669391 Jy ! Clean residual min=-0.005214 max=0.004344 Jy/beam ! Clean residual mean=0.000004 rms=0.001222 Jy/beam ! Combined flux in latest and established models = 0.0669391 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0669391 Jy ! Inverting map and beam ! Estimated beam: bmin=3.683 mas, bmaj=13.46 mas, bpa=13.74 degrees ! Estimated noise=1199.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00092249 Jy ! Component: 100 - total flux cleaned = 0.000844156 Jy ! Component: 150 - total flux cleaned = 0.000844836 Jy ! Component: 200 - total flux cleaned = 0.000898078 Jy ! Total flux subtracted in 200 components = 0.000898078 Jy ! Clean residual min=-0.002641 max=0.002867 Jy/beam ! Clean residual mean=-0.000005 rms=0.000738 Jy/beam ! Combined flux in latest and established models = 0.0678372 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 29 components and 0.0678372 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.817 mas, bmaj=19.08 mas, bpa=5.168 degrees ! Estimated noise=1479.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000374105 Jy ! Component: 100 - total flux cleaned = 0.000430851 Jy ! Component: 150 - total flux cleaned = 0.000457468 Jy ! Component: 200 - total flux cleaned = 0.000482161 Jy ! Total flux subtracted in 200 components = 0.000482161 Jy ! Clean residual min=-0.002708 max=0.003130 Jy/beam ! Clean residual mean=-0.000010 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.0683194 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.25055e-05 Jy ! Component: 100 - total flux cleaned = 4.41434e-05 Jy ! Component: 150 - total flux cleaned = 4.4535e-05 Jy ! Component: 200 - total flux cleaned = 4.55119e-05 Jy ! Total flux subtracted in 200 components = 4.55119e-05 Jy ! Clean residual min=-0.002694 max=0.003118 Jy/beam ! Clean residual mean=-0.000010 rms=0.000887 Jy/beam ! Combined flux in latest and established models = 0.0683649 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 45 components and 0.0683649 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.683 mas, bmaj=13.46 mas, bpa=13.74 degrees ! Estimated noise=1199.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.19521e-05 Jy ! Component: 100 - total flux cleaned = 8.02177e-05 Jy ! Component: 150 - total flux cleaned = 0.000106089 Jy ! Component: 200 - total flux cleaned = 0.000129776 Jy ! Total flux subtracted in 200 components = 0.000129776 Jy ! Clean residual min=-0.002457 max=0.002859 Jy/beam ! Clean residual mean=-0.000005 rms=0.000712 Jy/beam ! Combined flux in latest and established models = 0.0684946 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 53 components and 0.0684946 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124374Jy sigma=0.000628 ! Fit after self-cal, rms=0.124329Jy sigma=0.000628 wmodel J2353-2743_S_2017_01_16_pus_map.mod ! Writing 53 model components to file: J2353-2743_S_2017_01_16_pus_map.mod wobs J2353-2743_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J2353-2743_S_2017_01_16_pus_uvs.fits wwins J2353-2743_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J2353-2743_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000803044 Jy ! Component: 100 - total flux cleaned = 0.00102369 Jy ! Component: 150 - total flux cleaned = 0.00123155 Jy ! Component: 200 - total flux cleaned = 0.0014294 Jy ! Component: 250 - total flux cleaned = 0.00154246 Jy ! Component: 300 - total flux cleaned = 0.00168827 Jy ! Component: 350 - total flux cleaned = 0.00200662 Jy ! Component: 400 - total flux cleaned = 0.00217712 Jy ! Component: 450 - total flux cleaned = 0.00234422 Jy ! Component: 500 - total flux cleaned = 0.00250683 Jy ! Component: 550 - total flux cleaned = 0.00244258 Jy ! Component: 600 - total flux cleaned = 0.00253604 Jy ! Component: 650 - total flux cleaned = 0.00247504 Jy ! Component: 700 - total flux cleaned = 0.00265408 Jy ! Component: 750 - total flux cleaned = 0.00277115 Jy ! Component: 800 - total flux cleaned = 0.00294311 Jy ! Component: 850 - total flux cleaned = 0.00311178 Jy ! Component: 900 - total flux cleaned = 0.00324978 Jy ! Component: 950 - total flux cleaned = 0.00338555 Jy ! Component: 1000 - total flux cleaned = 0.00354502 Jy ! Component: 1050 - total flux cleaned = 0.00362342 Jy ! Component: 1100 - total flux cleaned = 0.00375184 Jy ! Component: 1150 - total flux cleaned = 0.00385362 Jy ! Component: 1200 - total flux cleaned = 0.00397821 Jy ! Component: 1250 - total flux cleaned = 0.00407682 Jy ! Component: 1300 - total flux cleaned = 0.00410148 Jy ! Component: 1350 - total flux cleaned = 0.00419767 Jy ! Component: 1400 - total flux cleaned = 0.00424482 Jy ! Component: 1450 - total flux cleaned = 0.00433809 Jy ! Component: 1500 - total flux cleaned = 0.00440647 Jy ! Component: 1550 - total flux cleaned = 0.00440646 Jy ! Component: 1600 - total flux cleaned = 0.00440663 Jy ! Component: 1650 - total flux cleaned = 0.00445079 Jy ! Component: 1700 - total flux cleaned = 0.0044511 Jy ! Component: 1750 - total flux cleaned = 0.00449427 Jy ! Component: 1800 - total flux cleaned = 0.0045365 Jy ! Component: 1850 - total flux cleaned = 0.00462017 Jy ! Component: 1900 - total flux cleaned = 0.00466123 Jy ! Component: 1950 - total flux cleaned = 0.00472217 Jy ! Component: 2000 - total flux cleaned = 0.00468161 Jy ! Component: 2050 - total flux cleaned = 0.00466191 Jy ! Component: 2100 - total flux cleaned = 0.00468151 Jy ! Component: 2150 - total flux cleaned = 0.004701 Jy ! Component: 2200 - total flux cleaned = 0.00468154 Jy ! Component: 2250 - total flux cleaned = 0.00473833 Jy ! Component: 2300 - total flux cleaned = 0.00470043 Jy ! Component: 2350 - total flux cleaned = 0.00464466 Jy ! Component: 2400 - total flux cleaned = 0.00460791 Jy ! Component: 2450 - total flux cleaned = 0.00455317 Jy ! Component: 2500 - total flux cleaned = 0.00446237 Jy ! Component: 2550 - total flux cleaned = 0.00437233 Jy ! Component: 2600 - total flux cleaned = 0.00426558 Jy ! Component: 2650 - total flux cleaned = 0.00415995 Jy ! Component: 2700 - total flux cleaned = 0.00403774 Jy ! Component: 2750 - total flux cleaned = 0.00396833 Jy ! Component: 2800 - total flux cleaned = 0.00389952 Jy ! Component: 2850 - total flux cleaned = 0.00378022 Jy ! Component: 2900 - total flux cleaned = 0.00366213 Jy ! Component: 2950 - total flux cleaned = 0.00356198 Jy ! Component: 3000 - total flux cleaned = 0.00346269 Jy ! Component: 3050 - total flux cleaned = 0.00336402 Jy ! Component: 3100 - total flux cleaned = 0.00329877 Jy ! Component: 3150 - total flux cleaned = 0.00320181 Jy ! Component: 3200 - total flux cleaned = 0.00313771 Jy ! Component: 3250 - total flux cleaned = 0.00307408 Jy ! Component: 3300 - total flux cleaned = 0.00301092 Jy ! Component: 3350 - total flux cleaned = 0.00290124 Jy ! Component: 3400 - total flux cleaned = 0.00283908 Jy ! Component: 3450 - total flux cleaned = 0.00273121 Jy ! Component: 3500 - total flux cleaned = 0.00263969 Jy ! Component: 3550 - total flux cleaned = 0.00262457 Jy ! Component: 3600 - total flux cleaned = 0.00254921 Jy ! Component: 3650 - total flux cleaned = 0.0024446 Jy ! Component: 3700 - total flux cleaned = 0.00238529 Jy ! Component: 3750 - total flux cleaned = 0.00231154 Jy ! Component: 3800 - total flux cleaned = 0.00223842 Jy ! Component: 3850 - total flux cleaned = 0.00215137 Jy ! Component: 3900 - total flux cleaned = 0.00207938 Jy ! Component: 3950 - total flux cleaned = 0.00195064 Jy ! Component: 4000 - total flux cleaned = 0.00186551 Jy ! Component: 4050 - total flux cleaned = 0.00179488 Jy ! Total flux subtracted in 4096 components = 0.00168275 Jy ! Clean residual min=-0.000983 max=0.000849 Jy/beam ! Clean residual mean=-0.000008 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 0.0701774 Jy keep ! Adding 272 model components to the UV plane model. ! The established model now contains 325 components and 0.0701774 Jy ![Exited script file: muppet] wmap "J2353-2743_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.683 x 13.46 at 13.74 degrees (North through East) ! Clean map min=-0.0025373 max=0.067053 Jy/beam ! Writing clean map to FITS file: J2353-2743_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.067053 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000274437 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.22785 1.22785 2.4557 4.91141 9.82281 19.6456 39.2912 78.5825 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.067 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.683 x 13.46 at 13.74 degrees (North through East) ! Clean map min=-0.0025373 max=0.067053 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2353-2743_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:26:54 2019