! Started logfile: J2352+3030_S_2017_10_09_pus_uvs.log on Sun May 12 13:23:17 2019 obs J2352+3030_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J2352+3030_S_2017_10_09_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.408105 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2352+3030 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 8580 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2352+3030_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 624 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 744 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 819 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 981 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.982970Jy sigma=0.008720 ! Fit after self-cal, rms=0.949658Jy sigma=0.008460 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.438 mas, bmaj=8.733 mas, bpa=2.702 degrees ! Estimated noise=1985.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0415695 Jy ! Component: 100 - total flux cleaned = 0.0519209 Jy ! Total flux subtracted in 100 components = 0.0519209 Jy ! Clean residual min=-0.004434 max=0.005763 Jy/beam ! Clean residual mean=0.000000 rms=0.001376 Jy/beam ! Combined flux in latest and established models = 0.0519209 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0519209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075141Jy sigma=0.000601 ! Fit after self-cal, rms=0.074522Jy sigma=0.000596 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.426 mas, bmaj=8.641 mas, bpa=-0.9879 degrees ! Estimated noise=1149.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00370636 Jy ! Component: 100 - total flux cleaned = 0.00424413 Jy ! Component: 150 - total flux cleaned = 0.00460051 Jy ! Component: 200 - total flux cleaned = 0.00464311 Jy ! Total flux subtracted in 200 components = 0.00464311 Jy ! Clean residual min=-0.002849 max=0.002986 Jy/beam ! Clean residual mean=0.000005 rms=0.000721 Jy/beam ! Combined flux in latest and established models = 0.056564 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 18 components and 0.056564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074235Jy sigma=0.000594 ! Fit after self-cal, rms=0.074171Jy sigma=0.000594 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 0.98 KP 1.05 ! LA 1.02 MK 1.19 NL 0.87 OV 1.00* ! PT 1.15 ! ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.93 HN 1.02 KP 1.03 ! LA 1.02 MK 0.93 NL 1.00* OV 1.00* ! PT 1.10 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.99 KP 0.98 ! LA 0.85 MK 1.15 NL 1.20 OV 1.00* ! PT 0.88 ! ! ! Correcting IF 4. ! A total of 117 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.11 HN 0.87 KP 1.00* ! LA 0.74 MK 0.78 NL 1.00* OV 1.00* ! PT 1.07 ! ! ! Fit before self-cal, rms=0.074171Jy sigma=0.000594 ! Fit after self-cal, rms=0.074454Jy sigma=0.000594 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.395 mas, bmaj=8.726 mas, bpa=-0.5384 degrees ! Estimated noise=1166.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000414116 Jy ! Component: 100 - total flux cleaned = -0.000356967 Jy ! Component: 150 - total flux cleaned = -0.000318301 Jy ! Component: 200 - total flux cleaned = -0.000271181 Jy ! Total flux subtracted in 200 components = -0.000271181 Jy ! Clean residual min=-0.002151 max=0.002317 Jy/beam ! Clean residual mean=0.000007 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.0562929 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 33 components and 0.0562929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074433Jy sigma=0.000594 ! Fit after self-cal, rms=0.074502Jy sigma=0.000593 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074502Jy sigma=0.000593 ! Fit after self-cal, rms=0.074988Jy sigma=0.000592 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.395 mas, bmaj=8.71 mas, bpa=-0.6757 degrees ! Estimated noise=1166.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.01757e-05 Jy ! Component: 100 - total flux cleaned = -2.31853e-05 Jy ! Component: 150 - total flux cleaned = -3.56081e-05 Jy ! Component: 200 - total flux cleaned = -3.52444e-05 Jy ! Total flux subtracted in 200 components = -3.52444e-05 Jy ! Clean residual min=-0.001967 max=0.002057 Jy/beam ! Clean residual mean=0.000004 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.0562576 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 38 components and 0.0562576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074980Jy sigma=0.000592 ! Fit after self-cal, rms=0.075039Jy sigma=0.000592 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.73397e-05 Jy ! Component: 100 - total flux cleaned = 3.077e-05 Jy ! Component: 150 - total flux cleaned = 2.27742e-05 Jy ! Component: 200 - total flux cleaned = 1.57292e-05 Jy ! Total flux subtracted in 200 components = 1.57292e-05 Jy ! Clean residual min=-0.001897 max=0.001979 Jy/beam ! Clean residual mean=0.000005 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.0562734 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 47 components and 0.0562734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075035Jy sigma=0.000592 ! Fit after self-cal, rms=0.075039Jy sigma=0.000592 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075039Jy sigma=0.000592 ! Fit after self-cal, rms=0.075334Jy sigma=0.000592 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.386 mas, bmaj=8.729 mas, bpa=-0.6905 degrees ! Estimated noise=1167.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.54873e-06 Jy ! Component: 100 - total flux cleaned = 2.99821e-05 Jy ! Component: 150 - total flux cleaned = 2.9611e-05 Jy ! Component: 200 - total flux cleaned = 4.38603e-05 Jy ! Total flux subtracted in 200 components = 4.38603e-05 Jy ! Clean residual min=-0.001922 max=0.001953 Jy/beam ! Clean residual mean=0.000005 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.0563172 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 51 components and 0.0563172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075331Jy sigma=0.000592 ! Fit after self-cal, rms=0.075369Jy sigma=0.000592 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.15404e-05 Jy ! Component: 100 - total flux cleaned = 2.31934e-05 Jy ! Component: 150 - total flux cleaned = 8.2016e-06 Jy ! Component: 200 - total flux cleaned = 8.16466e-06 Jy ! Total flux subtracted in 200 components = 8.16466e-06 Jy ! Clean residual min=-0.001896 max=0.002075 Jy/beam ! Clean residual mean=0.000005 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.0563254 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 57 components and 0.0563254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075366Jy sigma=0.000592 ! Fit after self-cal, rms=0.075366Jy sigma=0.000592 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075366Jy sigma=0.000592 ! Fit after self-cal, rms=0.075586Jy sigma=0.000592 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.419 mas, bmaj=9.851 mas, bpa=-7.955 degrees ! Estimated noise=1368.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.52306e-05 Jy ! Component: 100 - total flux cleaned = 3.58247e-05 Jy ! Component: 150 - total flux cleaned = 4.1914e-05 Jy ! Component: 200 - total flux cleaned = 4.17852e-05 Jy ! Total flux subtracted in 200 components = 4.17852e-05 Jy ! Clean residual min=-0.002303 max=0.002373 Jy/beam ! Clean residual mean=0.000009 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.0563672 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 63 components and 0.0563672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075585Jy sigma=0.000592 ! Fit after self-cal, rms=0.075597Jy sigma=0.000592 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.33183e-05 Jy ! Component: 100 - total flux cleaned = 2.93272e-05 Jy ! Component: 150 - total flux cleaned = 3.43318e-05 Jy ! Component: 200 - total flux cleaned = 4.32731e-05 Jy ! Total flux subtracted in 200 components = 4.32731e-05 Jy ! Clean residual min=-0.002292 max=0.002383 Jy/beam ! Clean residual mean=0.000009 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.0564104 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 65 components and 0.0564105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075596Jy sigma=0.000592 ! Fit after self-cal, rms=0.075596Jy sigma=0.000592 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.383 mas, bmaj=8.744 mas, bpa=-0.7099 degrees ! Estimated noise=1167.43 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.383 x 8.744 at -0.7099 degrees (North through East) ! Clean map min=-0.0018889 max=0.051989 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.371 mas, bmaj=9.083 mas, bpa=2.655 degrees ! Estimated noise=1969.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0401524 Jy ! Component: 100 - total flux cleaned = 0.050933 Jy ! Component: 150 - total flux cleaned = 0.052888 Jy ! Component: 200 - total flux cleaned = 0.0537969 Jy ! Total flux subtracted in 200 components = 0.0537969 Jy ! Clean residual min=-0.004320 max=0.004005 Jy/beam ! Clean residual mean=0.000000 rms=0.001101 Jy/beam ! Combined flux in latest and established models = 0.0537969 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0537969 Jy ! Inverting map and beam ! Estimated beam: bmin=4.383 mas, bmaj=8.744 mas, bpa=-0.7099 degrees ! Estimated noise=1167.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169631 Jy ! Component: 100 - total flux cleaned = 0.00203519 Jy ! Component: 150 - total flux cleaned = 0.0021346 Jy ! Component: 200 - total flux cleaned = 0.00216242 Jy ! Total flux subtracted in 200 components = 0.00216242 Jy ! Clean residual min=-0.002016 max=0.002020 Jy/beam ! Clean residual mean=0.000004 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.0559593 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 28 components and 0.0559593 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.419 mas, bmaj=9.851 mas, bpa=-7.955 degrees ! Estimated noise=1368.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000212146 Jy ! Component: 100 - total flux cleaned = 0.000258415 Jy ! Component: 150 - total flux cleaned = 0.000282589 Jy ! Component: 200 - total flux cleaned = 0.000292996 Jy ! Total flux subtracted in 200 components = 0.000292996 Jy ! Clean residual min=-0.002352 max=0.002355 Jy/beam ! Clean residual mean=0.000009 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.0562523 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.96299e-05 Jy ! Component: 100 - total flux cleaned = 2.8827e-05 Jy ! Component: 150 - total flux cleaned = 3.74515e-05 Jy ! Component: 200 - total flux cleaned = 4.56054e-05 Jy ! Total flux subtracted in 200 components = 4.56054e-05 Jy ! Clean residual min=-0.002326 max=0.002355 Jy/beam ! Clean residual mean=0.000009 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.0562979 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 41 components and 0.0562979 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.383 mas, bmaj=8.744 mas, bpa=-0.7099 degrees ! Estimated noise=1167.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000114024 Jy ! Component: 100 - total flux cleaned = -0.000100022 Jy ! Component: 150 - total flux cleaned = -7.2745e-05 Jy ! Component: 200 - total flux cleaned = -6.085e-05 Jy ! Total flux subtracted in 200 components = -6.085e-05 Jy ! Clean residual min=-0.001939 max=0.002056 Jy/beam ! Clean residual mean=0.000005 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 0.056237 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 46 components and 0.056237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075602Jy sigma=0.000592 ! Fit after self-cal, rms=0.075602Jy sigma=0.000592 wmodel J2352+3030_S_2017_10_09_pus_map.mod ! Writing 46 model components to file: J2352+3030_S_2017_10_09_pus_map.mod wobs J2352+3030_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J2352+3030_S_2017_10_09_pus_uvs.fits wwins J2352+3030_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J2352+3030_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.30773e-05 Jy ! Component: 100 - total flux cleaned = -0.000151581 Jy ! Component: 150 - total flux cleaned = -0.000184458 Jy ! Component: 200 - total flux cleaned = -0.000185179 Jy ! Component: 250 - total flux cleaned = -0.000157896 Jy ! Component: 300 - total flux cleaned = -0.000185506 Jy ! Component: 350 - total flux cleaned = -8.04958e-05 Jy ! Component: 400 - total flux cleaned = -0.000107323 Jy ! Component: 450 - total flux cleaned = -5.78336e-05 Jy ! Component: 500 - total flux cleaned = -3.36879e-05 Jy ! Component: 550 - total flux cleaned = 1.33545e-05 Jy ! Component: 600 - total flux cleaned = 5.88766e-05 Jy ! Component: 650 - total flux cleaned = 0.000103075 Jy ! Component: 700 - total flux cleaned = 0.000103013 Jy ! Component: 750 - total flux cleaned = 0.000145474 Jy ! Component: 800 - total flux cleaned = 0.000165872 Jy ! Component: 850 - total flux cleaned = 0.000206123 Jy ! Component: 900 - total flux cleaned = 0.000166261 Jy ! Component: 950 - total flux cleaned = 0.000146964 Jy ! Component: 1000 - total flux cleaned = 0.000127995 Jy ! Component: 1050 - total flux cleaned = 0.000109487 Jy ! Component: 1100 - total flux cleaned = 3.65638e-05 Jy ! Component: 1150 - total flux cleaned = 1.36405e-06 Jy ! Component: 1200 - total flux cleaned = -6.85188e-05 Jy ! Component: 1250 - total flux cleaned = -5.10357e-05 Jy ! Component: 1300 - total flux cleaned = -0.000119105 Jy ! Component: 1350 - total flux cleaned = -0.000152496 Jy ! Component: 1400 - total flux cleaned = -0.00026736 Jy ! Component: 1450 - total flux cleaned = -0.000331833 Jy ! Component: 1500 - total flux cleaned = -0.000411439 Jy ! Component: 1550 - total flux cleaned = -0.000489756 Jy ! Component: 1600 - total flux cleaned = -0.000551341 Jy ! Component: 1650 - total flux cleaned = -0.000642727 Jy ! Component: 1700 - total flux cleaned = -0.000717713 Jy ! Component: 1750 - total flux cleaned = -0.000791724 Jy ! Component: 1800 - total flux cleaned = -0.000820998 Jy ! Component: 1850 - total flux cleaned = -0.000893272 Jy ! Component: 1900 - total flux cleaned = -0.000936107 Jy ! Component: 1950 - total flux cleaned = -0.000992504 Jy ! Component: 2000 - total flux cleaned = -0.00104821 Jy ! Component: 2050 - total flux cleaned = -0.00108964 Jy ! Component: 2100 - total flux cleaned = -0.0011578 Jy ! Component: 2150 - total flux cleaned = -0.00123851 Jy ! Component: 2200 - total flux cleaned = -0.00127838 Jy ! Component: 2250 - total flux cleaned = -0.00133108 Jy ! Component: 2300 - total flux cleaned = -0.00135709 Jy ! Component: 2350 - total flux cleaned = -0.00139582 Jy ! Component: 2400 - total flux cleaned = -0.00144689 Jy ! Component: 2450 - total flux cleaned = -0.0014722 Jy ! Component: 2500 - total flux cleaned = -0.00148475 Jy ! Component: 2550 - total flux cleaned = -0.00152209 Jy ! Component: 2600 - total flux cleaned = -0.00148487 Jy ! Component: 2650 - total flux cleaned = -0.00148491 Jy ! Component: 2700 - total flux cleaned = -0.00147283 Jy ! Component: 2750 - total flux cleaned = -0.00149726 Jy ! Component: 2800 - total flux cleaned = -0.00150934 Jy ! Component: 2850 - total flux cleaned = -0.00146146 Jy ! Component: 2900 - total flux cleaned = -0.00147344 Jy ! Component: 2950 - total flux cleaned = -0.00150912 Jy ! Component: 3000 - total flux cleaned = -0.00149736 Jy ! Component: 3050 - total flux cleaned = -0.00149746 Jy ! Component: 3100 - total flux cleaned = -0.00152089 Jy ! Component: 3150 - total flux cleaned = -0.00149751 Jy ! Component: 3200 - total flux cleaned = -0.00150922 Jy ! Component: 3250 - total flux cleaned = -0.00152091 Jy ! Component: 3300 - total flux cleaned = -0.00153253 Jy ! Component: 3350 - total flux cleaned = -0.00153259 Jy ! Component: 3400 - total flux cleaned = -0.00153258 Jy ! Component: 3450 - total flux cleaned = -0.00152119 Jy ! Component: 3500 - total flux cleaned = -0.00150973 Jy ! Component: 3550 - total flux cleaned = -0.0015327 Jy ! Component: 3600 - total flux cleaned = -0.00150975 Jy ! Component: 3650 - total flux cleaned = -0.00150977 Jy ! Component: 3700 - total flux cleaned = -0.00152115 Jy ! Component: 3750 - total flux cleaned = -0.00153255 Jy ! Component: 3800 - total flux cleaned = -0.00155536 Jy ! Component: 3850 - total flux cleaned = -0.00154397 Jy ! Component: 3900 - total flux cleaned = -0.00156676 Jy ! Component: 3950 - total flux cleaned = -0.00155533 Jy ! Component: 4000 - total flux cleaned = -0.00156668 Jy ! Component: 4050 - total flux cleaned = -0.00154394 Jy ! Total flux subtracted in 4096 components = -0.00155534 Jy ! Clean residual min=-0.000660 max=0.000625 Jy/beam ! Clean residual mean=0.000001 rms=0.000192 Jy/beam ! Combined flux in latest and established models = 0.0546817 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 330 components and 0.0546817 Jy ![Exited script file: muppet] wmap "J2352+3030_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.383 x 8.744 at -0.7099 degrees (North through East) ! Clean map min=-0.0022429 max=0.052023 Jy/beam ! Writing clean map to FITS file: J2352+3030_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0520233 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000190343 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.09764 1.09764 2.19529 4.39057 8.78115 17.5623 35.1246 70.2492 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.052 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.383 x 8.744 at -0.7099 degrees (North through East) ! Clean map min=-0.0022429 max=0.052023 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2352+3030_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:23:22 2019