! Started logfile: J2351-4259_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:26:43 2019 obs J2351-4259_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J2351-4259_S_2017_01_16_pus_uva.fits ! AN table 1: 173 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.41991 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2351-4259 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 13076 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2351-4259_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 608 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 650 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 650 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 822 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.964037Jy sigma=0.004580 ! Fit after self-cal, rms=0.904001Jy sigma=0.004357 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.045 mas, bmaj=17.94 mas, bpa=7.53 degrees ! Estimated noise=2432.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0869326 Jy ! Component: 100 - total flux cleaned = 0.107881 Jy ! Total flux subtracted in 100 components = 0.107881 Jy ! Clean residual min=-0.008481 max=0.008096 Jy/beam ! Clean residual mean=0.000060 rms=0.002362 Jy/beam ! Combined flux in latest and established models = 0.107881 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.107881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245596Jy sigma=0.000644 ! Fit after self-cal, rms=0.245371Jy sigma=0.000643 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.974 mas, bmaj=20.81 mas, bpa=6.64 degrees ! Estimated noise=1405.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113426 Jy ! Component: 100 - total flux cleaned = 0.0167042 Jy ! Component: 150 - total flux cleaned = 0.0176803 Jy ! Component: 200 - total flux cleaned = 0.0179213 Jy ! Total flux subtracted in 200 components = 0.0179213 Jy ! Clean residual min=-0.005809 max=0.005699 Jy/beam ! Clean residual mean=0.000039 rms=0.001798 Jy/beam ! Combined flux in latest and established models = 0.125802 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 73 components and 0.125802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243750Jy sigma=0.000641 ! Fit after self-cal, rms=0.243760Jy sigma=0.000640 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.93 KP 0.98 ! LA 1.05 MK 1.00* NL 1.03 OV 1.01 ! PT 1.05 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.18 KP 1.02 ! LA 0.99 MK 1.00* NL 1.10 OV 1.06 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.06 KP 1.00 ! LA 1.04 MK 1.00* NL 1.10 OV 0.98 ! PT 1.10 SC 1.09 ! ! ! Correcting IF 4. ! A total of 177 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 0.83 KP 0.76 ! LA 0.92 MK 1.00* NL 1.00* OV 0.98 ! PT 0.87 SC 0.91 ! ! ! Fit before self-cal, rms=0.243760Jy sigma=0.000640 ! Fit after self-cal, rms=0.239362Jy sigma=0.000639 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.953 mas, bmaj=20.82 mas, bpa=6.531 degrees ! Estimated noise=1432.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124912 Jy ! Component: 100 - total flux cleaned = 0.00125424 Jy ! Component: 150 - total flux cleaned = 0.00125409 Jy ! Component: 200 - total flux cleaned = 0.00125431 Jy ! Total flux subtracted in 200 components = 0.00125431 Jy ! Clean residual min=-0.004799 max=0.004177 Jy/beam ! Clean residual mean=0.000032 rms=0.001483 Jy/beam ! Combined flux in latest and established models = 0.127057 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 97 components and 0.127057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239020Jy sigma=0.000639 ! Fit after self-cal, rms=0.238973Jy sigma=0.000638 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238973Jy sigma=0.000638 ! Fit after self-cal, rms=0.159550Jy sigma=0.000634 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.971 mas, bmaj=20.81 mas, bpa=6.534 degrees ! Estimated noise=1433.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117735 Jy ! Component: 100 - total flux cleaned = 0.00117936 Jy ! Component: 150 - total flux cleaned = 0.00115879 Jy ! Component: 200 - total flux cleaned = 0.00114045 Jy ! Total flux subtracted in 200 components = 0.00114045 Jy ! Clean residual min=-0.003115 max=0.003059 Jy/beam ! Clean residual mean=0.000024 rms=0.000914 Jy/beam ! Combined flux in latest and established models = 0.128197 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 112 components and 0.128197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159529Jy sigma=0.000634 ! Fit after self-cal, rms=0.159336Jy sigma=0.000633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.94339e-05 Jy ! Component: 100 - total flux cleaned = -9.00103e-05 Jy ! Component: 150 - total flux cleaned = -0.000134842 Jy ! Component: 200 - total flux cleaned = -0.000172597 Jy ! Total flux subtracted in 200 components = -0.000172597 Jy ! Clean residual min=-0.003291 max=0.003323 Jy/beam ! Clean residual mean=0.000032 rms=0.000951 Jy/beam ! Combined flux in latest and established models = 0.128024 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 116 components and 0.128024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159327Jy sigma=0.000633 ! Fit after self-cal, rms=0.159323Jy sigma=0.000633 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159323Jy sigma=0.000633 ! Fit after self-cal, rms=0.155972Jy sigma=0.000632 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.968 mas, bmaj=20.86 mas, bpa=6.625 degrees ! Estimated noise=1437.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.49147e-05 Jy ! Component: 100 - total flux cleaned = 5.7866e-05 Jy ! Component: 150 - total flux cleaned = 1.10891e-05 Jy ! Component: 200 - total flux cleaned = -1.01633e-05 Jy ! Total flux subtracted in 200 components = -1.01633e-05 Jy ! Clean residual min=-0.002942 max=0.003116 Jy/beam ! Clean residual mean=0.000017 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 0.128014 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 118 components and 0.128014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155963Jy sigma=0.000632 ! Fit after self-cal, rms=0.155942Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000147956 Jy ! Component: 100 - total flux cleaned = -0.000195221 Jy ! Component: 150 - total flux cleaned = -0.00021565 Jy ! Component: 200 - total flux cleaned = -0.000233314 Jy ! Total flux subtracted in 200 components = -0.000233314 Jy ! Clean residual min=-0.002966 max=0.003048 Jy/beam ! Clean residual mean=0.000022 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.127781 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 120 components and 0.127781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155935Jy sigma=0.000632 ! Fit after self-cal, rms=0.155868Jy sigma=0.000632 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155868Jy sigma=0.000632 ! Fit after self-cal, rms=0.156271Jy sigma=0.000632 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.947 mas, bmaj=32.77 mas, bpa=-1.203 degrees ! Estimated noise=1655.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000392174 Jy ! Component: 100 - total flux cleaned = 0.00032769 Jy ! Component: 150 - total flux cleaned = 0.000271547 Jy ! Component: 200 - total flux cleaned = 0.000220411 Jy ! Total flux subtracted in 200 components = 0.000220411 Jy ! Clean residual min=-0.002583 max=0.003089 Jy/beam ! Clean residual mean=0.000028 rms=0.000927 Jy/beam ! Combined flux in latest and established models = 0.128001 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 128 components and 0.128001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156264Jy sigma=0.000632 ! Fit after self-cal, rms=0.156278Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.10869e-05 Jy ! Component: 100 - total flux cleaned = -0.000128107 Jy ! Component: 150 - total flux cleaned = -0.000161341 Jy ! Component: 200 - total flux cleaned = -0.000207399 Jy ! Total flux subtracted in 200 components = -0.000207399 Jy ! Clean residual min=-0.002555 max=0.003097 Jy/beam ! Clean residual mean=0.000029 rms=0.000926 Jy/beam ! Combined flux in latest and established models = 0.127794 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 132 components and 0.127794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156275Jy sigma=0.000632 ! Fit after self-cal, rms=0.156273Jy sigma=0.000632 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.961 mas, bmaj=20.87 mas, bpa=6.658 degrees ! Estimated noise=1439.19 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.961 x 20.87 at 6.658 degrees (North through East) ! Clean map min=-0.0081752 max=0.11968 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.034 mas, bmaj=17.83 mas, bpa=7.385 degrees ! Estimated noise=2468.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0866289 Jy ! Component: 100 - total flux cleaned = 0.109351 Jy ! Component: 150 - total flux cleaned = 0.118256 Jy ! Component: 200 - total flux cleaned = 0.120337 Jy ! Total flux subtracted in 200 components = 0.120337 Jy ! Clean residual min=-0.006359 max=0.007607 Jy/beam ! Clean residual mean=0.000010 rms=0.001865 Jy/beam ! Combined flux in latest and established models = 0.120337 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.120337 Jy ! Inverting map and beam ! Estimated beam: bmin=3.961 mas, bmaj=20.87 mas, bpa=6.658 degrees ! Estimated noise=1439.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00547032 Jy ! Component: 100 - total flux cleaned = 0.00696613 Jy ! Component: 150 - total flux cleaned = 0.00727298 Jy ! Component: 200 - total flux cleaned = 0.00720667 Jy ! Total flux subtracted in 200 components = 0.00720667 Jy ! Clean residual min=-0.003120 max=0.003101 Jy/beam ! Clean residual mean=0.000020 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 0.127543 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 60 components and 0.127543 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.947 mas, bmaj=32.77 mas, bpa=-1.203 degrees ! Estimated noise=1655.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000515734 Jy ! Component: 100 - total flux cleaned = 0.000517106 Jy ! Component: 150 - total flux cleaned = 0.000566314 Jy ! Component: 200 - total flux cleaned = 0.000527551 Jy ! Total flux subtracted in 200 components = 0.000527551 Jy ! Clean residual min=-0.002861 max=0.003000 Jy/beam ! Clean residual mean=0.000029 rms=0.000973 Jy/beam ! Combined flux in latest and established models = 0.128071 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.79053e-05 Jy ! Component: 100 - total flux cleaned = -0.000102871 Jy ! Component: 150 - total flux cleaned = -0.000132273 Jy ! Component: 200 - total flux cleaned = -0.000158665 Jy ! Total flux subtracted in 200 components = -0.000158665 Jy ! Clean residual min=-0.002777 max=0.003063 Jy/beam ! Clean residual mean=0.000029 rms=0.000954 Jy/beam ! Combined flux in latest and established models = 0.127912 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 75 components and 0.127912 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.961 mas, bmaj=20.87 mas, bpa=6.658 degrees ! Estimated noise=1439.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000252141 Jy ! Component: 100 - total flux cleaned = -0.000218375 Jy ! Component: 150 - total flux cleaned = -0.000214458 Jy ! Component: 200 - total flux cleaned = -0.000236007 Jy ! Total flux subtracted in 200 components = -0.000236007 Jy ! Clean residual min=-0.002940 max=0.003319 Jy/beam ! Clean residual mean=0.000018 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 0.127676 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 83 components and 0.127676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156303Jy sigma=0.000632 ! Fit after self-cal, rms=0.156307Jy sigma=0.000632 wmodel J2351-4259_S_2017_01_16_pus_map.mod ! Writing 83 model components to file: J2351-4259_S_2017_01_16_pus_map.mod wobs J2351-4259_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J2351-4259_S_2017_01_16_pus_uvs.fits wwins J2351-4259_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J2351-4259_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000511377 Jy ! Component: 100 - total flux cleaned = 0.000460897 Jy ! Component: 150 - total flux cleaned = 0.000600385 Jy ! Component: 200 - total flux cleaned = 0.000600371 Jy ! Component: 250 - total flux cleaned = 0.00060091 Jy ! Component: 300 - total flux cleaned = 0.000600719 Jy ! Component: 350 - total flux cleaned = 0.000640481 Jy ! Component: 400 - total flux cleaned = 0.000759434 Jy ! Component: 450 - total flux cleaned = 0.000913956 Jy ! Component: 500 - total flux cleaned = 0.0010259 Jy ! Component: 550 - total flux cleaned = 0.00102695 Jy ! Component: 600 - total flux cleaned = 0.00117103 Jy ! Component: 650 - total flux cleaned = 0.00124187 Jy ! Component: 700 - total flux cleaned = 0.00134491 Jy ! Component: 750 - total flux cleaned = 0.00141264 Jy ! Component: 800 - total flux cleaned = 0.00144605 Jy ! Component: 850 - total flux cleaned = 0.00147799 Jy ! Component: 900 - total flux cleaned = 0.00157341 Jy ! Component: 950 - total flux cleaned = 0.0016978 Jy ! Component: 1000 - total flux cleaned = 0.00181955 Jy ! Component: 1050 - total flux cleaned = 0.00175968 Jy ! Component: 1100 - total flux cleaned = 0.00184831 Jy ! Component: 1150 - total flux cleaned = 0.0017906 Jy ! Component: 1200 - total flux cleaned = 0.00193369 Jy ! Component: 1250 - total flux cleaned = 0.00193353 Jy ! Component: 1300 - total flux cleaned = 0.00196125 Jy ! Component: 1350 - total flux cleaned = 0.00198831 Jy ! Component: 1400 - total flux cleaned = 0.00198784 Jy ! Component: 1450 - total flux cleaned = 0.00201471 Jy ! Component: 1500 - total flux cleaned = 0.00206728 Jy ! Component: 1550 - total flux cleaned = 0.00206736 Jy ! Component: 1600 - total flux cleaned = 0.00199111 Jy ! Component: 1650 - total flux cleaned = 0.00199111 Jy ! Component: 1700 - total flux cleaned = 0.00191715 Jy ! Component: 1750 - total flux cleaned = 0.00194166 Jy ! Component: 1800 - total flux cleaned = 0.00194157 Jy ! Component: 1850 - total flux cleaned = 0.00191779 Jy ! Component: 1900 - total flux cleaned = 0.0019413 Jy ! Component: 1950 - total flux cleaned = 0.00196402 Jy ! Component: 2000 - total flux cleaned = 0.00191821 Jy ! Component: 2050 - total flux cleaned = 0.00196353 Jy ! Component: 2100 - total flux cleaned = 0.00191871 Jy ! Component: 2150 - total flux cleaned = 0.00198542 Jy ! Component: 2200 - total flux cleaned = 0.00205103 Jy ! Component: 2250 - total flux cleaned = 0.00205061 Jy ! Component: 2300 - total flux cleaned = 0.00207177 Jy ! Component: 2350 - total flux cleaned = 0.00205023 Jy ! Component: 2400 - total flux cleaned = 0.00205006 Jy ! Component: 2450 - total flux cleaned = 0.00202938 Jy ! Component: 2500 - total flux cleaned = 0.00209111 Jy ! Component: 2550 - total flux cleaned = 0.00209096 Jy ! Component: 2600 - total flux cleaned = 0.00215146 Jy ! Component: 2650 - total flux cleaned = 0.00213155 Jy ! Component: 2700 - total flux cleaned = 0.00221065 Jy ! Component: 2750 - total flux cleaned = 0.00223033 Jy ! Component: 2800 - total flux cleaned = 0.00223006 Jy ! Component: 2850 - total flux cleaned = 0.00222982 Jy ! Component: 2900 - total flux cleaned = 0.00217267 Jy ! Component: 2950 - total flux cleaned = 0.00219175 Jy ! Component: 3000 - total flux cleaned = 0.00215395 Jy ! Component: 3050 - total flux cleaned = 0.00206034 Jy ! Component: 3100 - total flux cleaned = 0.00202321 Jy ! Component: 3150 - total flux cleaned = 0.00202328 Jy ! Component: 3200 - total flux cleaned = 0.00200489 Jy ! Component: 3250 - total flux cleaned = 0.00196824 Jy ! Component: 3300 - total flux cleaned = 0.00198645 Jy ! Component: 3350 - total flux cleaned = 0.001932 Jy ! Component: 3400 - total flux cleaned = 0.00191405 Jy ! Component: 3450 - total flux cleaned = 0.00194957 Jy ! Component: 3500 - total flux cleaned = 0.00191378 Jy ! Component: 3550 - total flux cleaned = 0.00186059 Jy ! Component: 3600 - total flux cleaned = 0.00184299 Jy ! Component: 3650 - total flux cleaned = 0.00184303 Jy ! Component: 3700 - total flux cleaned = 0.001843 Jy ! Component: 3750 - total flux cleaned = 0.00180816 Jy ! Component: 3800 - total flux cleaned = 0.00177353 Jy ! Component: 3850 - total flux cleaned = 0.00175629 Jy ! Component: 3900 - total flux cleaned = 0.0017563 Jy ! Component: 3950 - total flux cleaned = 0.00175629 Jy ! Component: 4000 - total flux cleaned = 0.00172222 Jy ! Component: 4050 - total flux cleaned = 0.00173922 Jy ! Total flux subtracted in 4096 components = 0.00170527 Jy ! Clean residual min=-0.000924 max=0.001237 Jy/beam ! Clean residual mean=0.000010 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.129382 Jy keep ! Adding 301 model components to the UV plane model. ! The established model now contains 384 components and 0.129381 Jy ![Exited script file: muppet] wmap "J2351-4259_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.961 x 20.87 at 6.658 degrees (North through East) ! Clean map min=-0.0064791 max=0.11834 Jy/beam ! Writing clean map to FITS file: J2351-4259_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.118341 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000342204 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.867507 0.867507 1.73501 3.47003 6.94006 13.8801 27.7602 55.5205 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.118 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.961 x 20.87 at 6.658 degrees (North through East) ! Clean map min=-0.0064791 max=0.11834 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2351-4259_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:26:48 2019