! Started logfile: J2350+1106_S_2017_05_01_pus_uvs.log on Wed May 1 18:45:52 2019 obs J2350+1106_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J2350+1106_S_2017_05_01_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.960624 visibilities/baseline/integration-bin. ! Found source: J2350+1106 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 19712 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2350+1106_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 479 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.841656Jy sigma=0.027200 ! Fit after self-cal, rms=0.835721Jy sigma=0.027173 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.106 mas, bmaj=7.333 mas, bpa=-3.896 degrees ! Estimated noise=670.769 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0896853 Jy ! Component: 100 - total flux cleaned = 0.112333 Jy ! Total flux subtracted in 100 components = 0.112333 Jy ! Clean residual min=-0.036791 max=0.038360 Jy/beam ! Clean residual mean=-0.000074 rms=0.013964 Jy/beam ! Combined flux in latest and established models = 0.112333 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.112333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130106Jy sigma=0.002910 ! Fit after self-cal, rms=0.130087Jy sigma=0.002910 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.622 mas, bmaj=8.234 mas, bpa=-3.858 degrees ! Estimated noise=518.958 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0208411 Jy ! Component: 100 - total flux cleaned = 0.0204613 Jy ! Component: 150 - total flux cleaned = 0.0198529 Jy ! Component: 200 - total flux cleaned = 0.0191088 Jy ! Total flux subtracted in 200 components = 0.0191088 Jy ! Clean residual min=-0.034133 max=0.035399 Jy/beam ! Clean residual mean=-0.000292 rms=0.010218 Jy/beam ! Combined flux in latest and established models = 0.131442 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 20 components and 0.131442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119320Jy sigma=0.003390 ! Fit after self-cal, rms=0.119308Jy sigma=0.003390 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.74 HN 0.91 KP 0.84 ! LA 0.80 MK 0.86 NL 0.77 OV 0.82 ! PT 0.96 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.77 HN 0.96 KP 0.81 ! LA 0.79 MK 0.87 NL 0.83 OV 0.82 ! PT 0.92 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.82 HN 0.90 KP 0.82 ! LA 0.83 MK 0.89 NL 0.82 OV 0.75 ! PT 0.88 SC 0.95 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.96 HN 0.79 KP 1.00* ! LA 33.25 MK 1.14 NL 1.00* OV 1.00* ! PT 0.89 SC 1.00* ! ! ! Fit before self-cal, rms=0.119308Jy sigma=0.003390 ! Fit after self-cal, rms=1.401284Jy sigma=0.000813 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.551 mas, bmaj=7.89 mas, bpa=-1.732 degrees ! Estimated noise=513.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (24.5, 53). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0240089 Jy ! Component: 100 - total flux cleaned = 0.0355831 Jy ! Component: 150 - total flux cleaned = 0.0419934 Jy ! Component: 200 - total flux cleaned = 0.0459509 Jy ! Total flux subtracted in 200 components = 0.0459509 Jy ! Clean residual min=-0.003801 max=0.004230 Jy/beam ! Clean residual mean=-0.000034 rms=0.001014 Jy/beam ! Combined flux in latest and established models = 0.177393 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 55 components and 0.177393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.400682Jy sigma=0.000723 ! Fit after self-cal, rms=1.400720Jy sigma=0.000703 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.400720Jy sigma=0.000703 ! Fit after self-cal, rms=1.297376Jy sigma=0.000688 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.582 mas, bmaj=7.945 mas, bpa=-1.54 degrees ! Estimated noise=501.589 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00512875 Jy ! Component: 100 - total flux cleaned = 0.00664506 Jy ! Component: 150 - total flux cleaned = 0.00757172 Jy ! Component: 200 - total flux cleaned = 0.00851939 Jy ! Total flux subtracted in 200 components = 0.00851939 Jy ! Clean residual min=-0.002121 max=0.002453 Jy/beam ! Clean residual mean=-0.000018 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.185912 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 84 components and 0.185912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.297204Jy sigma=0.000684 ! Fit after self-cal, rms=1.297202Jy sigma=0.000683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (54, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180368 Jy ! Component: 100 - total flux cleaned = 0.00221713 Jy ! Component: 150 - total flux cleaned = 0.00256962 Jy ! Component: 200 - total flux cleaned = 0.00278684 Jy ! Total flux subtracted in 200 components = 0.00278684 Jy ! Clean residual min=-0.002041 max=0.002131 Jy/beam ! Clean residual mean=-0.000016 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.188699 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 102 components and 0.188699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.297054Jy sigma=0.000682 ! Fit after self-cal, rms=1.297050Jy sigma=0.000682 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.297050Jy sigma=0.000682 ! Fit after self-cal, rms=0.072798Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.587 mas, bmaj=7.953 mas, bpa=-1.55 degrees ! Estimated noise=501.372 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138845 Jy ! Component: 100 - total flux cleaned = 0.00196715 Jy ! Component: 150 - total flux cleaned = 0.00216998 Jy ! Component: 200 - total flux cleaned = 0.00232698 Jy ! Total flux subtracted in 200 components = 0.00232698 Jy ! Clean residual min=-0.001519 max=0.001645 Jy/beam ! Clean residual mean=-0.000001 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.191026 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 121 components and 0.191026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072755Jy sigma=0.000671 ! Fit after self-cal, rms=0.072720Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00022354 Jy ! Component: 100 - total flux cleaned = 0.0002508 Jy ! Component: 150 - total flux cleaned = 0.000304341 Jy ! Component: 200 - total flux cleaned = 0.000330201 Jy ! Total flux subtracted in 200 components = 0.000330201 Jy ! Clean residual min=-0.001489 max=0.001562 Jy/beam ! Clean residual mean=-0.000001 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.191356 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 133 components and 0.191356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072699Jy sigma=0.000671 ! Fit after self-cal, rms=0.072700Jy sigma=0.000671 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072700Jy sigma=0.000671 ! Fit after self-cal, rms=0.072932Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.514 mas, bmaj=11.22 mas, bpa=-2.536 degrees ! Estimated noise=583.813 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122879 Jy ! Component: 100 - total flux cleaned = 0.00145511 Jy ! Component: 150 - total flux cleaned = 0.0016138 Jy ! Component: 200 - total flux cleaned = 0.00173169 Jy ! Total flux subtracted in 200 components = 0.00173169 Jy ! Clean residual min=-0.001719 max=0.001968 Jy/beam ! Clean residual mean=-0.000002 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.193088 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 146 components and 0.193088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072923Jy sigma=0.000670 ! Fit after self-cal, rms=0.072920Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000143555 Jy ! Component: 100 - total flux cleaned = 0.000186188 Jy ! Component: 150 - total flux cleaned = 0.000223587 Jy ! Component: 200 - total flux cleaned = 0.000276266 Jy ! Total flux subtracted in 200 components = 0.000276266 Jy ! Clean residual min=-0.001658 max=0.001910 Jy/beam ! Clean residual mean=-0.000002 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.193364 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 155 components and 0.193364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072918Jy sigma=0.000670 ! Fit after self-cal, rms=0.072917Jy sigma=0.000670 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.587 mas, bmaj=7.948 mas, bpa=-1.509 degrees ! Estimated noise=502.568 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.587 x 7.948 at -1.509 degrees (North through East) ! Clean map min=-0.0020681 max=0.13064 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.976 mas, bmaj=7.079 mas, bpa=-1.63 degrees ! Estimated noise=744.469 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0998063 Jy ! Component: 100 - total flux cleaned = 0.128628 Jy ! Component: 150 - total flux cleaned = 0.146384 Jy ! Component: 200 - total flux cleaned = 0.159013 Jy ! Total flux subtracted in 200 components = 0.159013 Jy ! Clean residual min=-0.003968 max=0.007112 Jy/beam ! Clean residual mean=-0.000005 rms=0.001056 Jy/beam ! Combined flux in latest and established models = 0.159013 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.159013 Jy ! Inverting map and beam ! Estimated beam: bmin=3.587 mas, bmaj=7.948 mas, bpa=-1.509 degrees ! Estimated noise=502.568 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114599 Jy ! Component: 100 - total flux cleaned = 0.0189518 Jy ! Component: 150 - total flux cleaned = 0.0243548 Jy ! Component: 200 - total flux cleaned = 0.0268598 Jy ! Total flux subtracted in 200 components = 0.0268598 Jy ! Clean residual min=-0.002468 max=0.002785 Jy/beam ! Clean residual mean=-0.000005 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.185873 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 53 components and 0.185873 Jy ! Inverting map ! Added new window around map position (3, 7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00211032 Jy ! Component: 100 - total flux cleaned = 0.00304771 Jy ! Component: 150 - total flux cleaned = 0.00356443 Jy ! Component: 200 - total flux cleaned = 0.00403131 Jy ! Total flux subtracted in 200 components = 0.00403131 Jy ! Clean residual min=-0.001726 max=0.002079 Jy/beam ! Clean residual mean=-0.000003 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.189904 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 74 components and 0.189904 Jy ! Inverting map ! Added new window around map position (33.5, 53.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142272 Jy ! Component: 100 - total flux cleaned = 0.00196105 Jy ! Component: 150 - total flux cleaned = 0.00245293 Jy ! Component: 200 - total flux cleaned = 0.00296372 Jy ! Total flux subtracted in 200 components = 0.00296372 Jy ! Clean residual min=-0.001539 max=0.001596 Jy/beam ! Clean residual mean=-0.000002 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.192868 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 92 components and 0.192868 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.514 mas, bmaj=11.22 mas, bpa=-2.536 degrees ! Estimated noise=583.813 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174839 Jy ! Component: 100 - total flux cleaned = 0.00228537 Jy ! Component: 150 - total flux cleaned = 0.00250539 Jy ! Component: 200 - total flux cleaned = 0.00269609 Jy ! Total flux subtracted in 200 components = 0.00269609 Jy ! Clean residual min=-0.001462 max=0.001728 Jy/beam ! Clean residual mean=-0.000003 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.195564 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136181 Jy ! Component: 100 - total flux cleaned = 0.000166824 Jy ! Component: 150 - total flux cleaned = 0.000250911 Jy ! Component: 200 - total flux cleaned = 0.000276157 Jy ! Total flux subtracted in 200 components = 0.000276157 Jy ! Clean residual min=-0.001439 max=0.001592 Jy/beam ! Clean residual mean=-0.000003 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.19584 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 151 components and 0.19584 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.587 mas, bmaj=7.948 mas, bpa=-1.509 degrees ! Estimated noise=502.568 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000169485 Jy ! Component: 100 - total flux cleaned = -0.000140804 Jy ! Component: 150 - total flux cleaned = -0.000143454 Jy ! Component: 200 - total flux cleaned = -0.000143946 Jy ! Total flux subtracted in 200 components = -0.000143946 Jy ! Clean residual min=-0.001427 max=0.001416 Jy/beam ! Clean residual mean=-0.000001 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.195696 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 170 components and 0.195696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072906Jy sigma=0.000670 ! Fit after self-cal, rms=0.072907Jy sigma=0.000670 wmodel J2350+1106_S_2017_05_01_pus_map.mod ! Writing 170 model components to file: J2350+1106_S_2017_05_01_pus_map.mod wobs J2350+1106_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J2350+1106_S_2017_05_01_pus_uvs.fits wwins J2350+1106_S_2017_05_01_pus_map.win ! wwins: Wrote 5 windows to J2350+1106_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 5.26733e-05 Jy ! Component: 100 - total flux cleaned = 0.000101182 Jy ! Component: 150 - total flux cleaned = 0.000124203 Jy ! Component: 200 - total flux cleaned = 0.000146282 Jy ! Component: 250 - total flux cleaned = 0.000146268 Jy ! Component: 300 - total flux cleaned = 0.00018927 Jy ! Component: 350 - total flux cleaned = 0.000189144 Jy ! Component: 400 - total flux cleaned = 0.000229686 Jy ! Component: 450 - total flux cleaned = 0.000209507 Jy ! Component: 500 - total flux cleaned = 0.000229241 Jy ! Component: 550 - total flux cleaned = 0.000190804 Jy ! Component: 600 - total flux cleaned = 0.00026679 Jy ! Component: 650 - total flux cleaned = 0.000229074 Jy ! Component: 700 - total flux cleaned = 0.0002111 Jy ! Component: 750 - total flux cleaned = 0.000193093 Jy ! Component: 800 - total flux cleaned = 0.000175488 Jy ! Component: 850 - total flux cleaned = 8.73608e-05 Jy ! Component: 900 - total flux cleaned = 3.56416e-05 Jy ! Component: 950 - total flux cleaned = 1.13434e-06 Jy ! Component: 1000 - total flux cleaned = -0.000134261 Jy ! Component: 1050 - total flux cleaned = -0.000200834 Jy ! Component: 1100 - total flux cleaned = -0.000233865 Jy ! Component: 1150 - total flux cleaned = -0.000282737 Jy ! Component: 1200 - total flux cleaned = -0.000330851 Jy ! Component: 1250 - total flux cleaned = -0.000362534 Jy ! Component: 1300 - total flux cleaned = -0.000409582 Jy ! Component: 1350 - total flux cleaned = -0.000424973 Jy ! Component: 1400 - total flux cleaned = -0.000471046 Jy ! Component: 1450 - total flux cleaned = -0.000516798 Jy ! Component: 1500 - total flux cleaned = -0.000531996 Jy ! Component: 1550 - total flux cleaned = -0.000546876 Jy ! Component: 1600 - total flux cleaned = -0.000547066 Jy ! Component: 1650 - total flux cleaned = -0.000561737 Jy ! Component: 1700 - total flux cleaned = -0.000576127 Jy ! Component: 1750 - total flux cleaned = -0.000561816 Jy ! Component: 1800 - total flux cleaned = -0.000590203 Jy ! Component: 1850 - total flux cleaned = -0.000547817 Jy ! Component: 1900 - total flux cleaned = -0.000561823 Jy ! Component: 1950 - total flux cleaned = -0.000534086 Jy ! Component: 2000 - total flux cleaned = -0.000493112 Jy ! Component: 2050 - total flux cleaned = -0.000479611 Jy ! Component: 2100 - total flux cleaned = -0.00047981 Jy ! Component: 2150 - total flux cleaned = -0.000479845 Jy ! Component: 2200 - total flux cleaned = -0.000400526 Jy ! Component: 2250 - total flux cleaned = -0.000400296 Jy ! Component: 2300 - total flux cleaned = -0.000361399 Jy ! Component: 2350 - total flux cleaned = -0.000284027 Jy ! Component: 2400 - total flux cleaned = -0.000271293 Jy ! Component: 2450 - total flux cleaned = -0.000283956 Jy ! Component: 2500 - total flux cleaned = -0.000296544 Jy ! Component: 2550 - total flux cleaned = -0.000296553 Jy ! Component: 2600 - total flux cleaned = -0.000259319 Jy ! Component: 2650 - total flux cleaned = -0.000222459 Jy ! Component: 2700 - total flux cleaned = -0.000234456 Jy ! Component: 2750 - total flux cleaned = -0.000210243 Jy ! Component: 2800 - total flux cleaned = -0.000210405 Jy ! Component: 2850 - total flux cleaned = -0.000150615 Jy ! Component: 2900 - total flux cleaned = -7.94913e-05 Jy ! Component: 2950 - total flux cleaned = -0.000114795 Jy ! Component: 3000 - total flux cleaned = -5.62769e-05 Jy ! Component: 3050 - total flux cleaned = -7.9616e-05 Jy ! Component: 3100 - total flux cleaned = -2.18666e-05 Jy ! Component: 3150 - total flux cleaned = -1.03454e-05 Jy ! Component: 3200 - total flux cleaned = 3.52636e-05 Jy ! Component: 3250 - total flux cleaned = 1.25518e-05 Jy ! Component: 3300 - total flux cleaned = 4.63732e-05 Jy ! Component: 3350 - total flux cleaned = 0.000102318 Jy ! Component: 3400 - total flux cleaned = 0.000124641 Jy ! Component: 3450 - total flux cleaned = 0.000102515 Jy ! Component: 3500 - total flux cleaned = 0.000146601 Jy ! Component: 3550 - total flux cleaned = 0.000135722 Jy ! Component: 3600 - total flux cleaned = 0.000179067 Jy ! Component: 3650 - total flux cleaned = 0.000189863 Jy ! Component: 3700 - total flux cleaned = 0.000189798 Jy ! Component: 3750 - total flux cleaned = 0.000232493 Jy ! Component: 3800 - total flux cleaned = 0.000264216 Jy ! Component: 3850 - total flux cleaned = 0.000264205 Jy ! Component: 3900 - total flux cleaned = 0.000306059 Jy ! Component: 3950 - total flux cleaned = 0.000274869 Jy ! Component: 4000 - total flux cleaned = 0.000326498 Jy ! Component: 4050 - total flux cleaned = 0.000347186 Jy ! Total flux subtracted in 4096 components = 0.000377838 Jy ! Clean residual min=-0.000655 max=0.000635 Jy/beam ! Clean residual mean=-0.000001 rms=0.000193 Jy/beam ! Combined flux in latest and established models = 0.196074 Jy keep ! Adding 291 model components to the UV plane model. ! The established model now contains 461 components and 0.196074 Jy ![Exited script file: muppet] wmap "J2350+1106_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.587 x 7.948 at -1.509 degrees (North through East) ! Clean map min=-0.0014557 max=0.12957 Jy/beam ! Writing clean map to FITS file: J2350+1106_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.129568 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000192028 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.444618 0.444618 0.889236 1.77847 3.55694 7.11389 14.2278 28.4556 56.9111 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.129 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.587 x 7.948 at -1.509 degrees (North through East) ! Clean map min=-0.0014557 max=0.12957 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2350+1106_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:45:57 2019