! Started logfile: J2348+0624_S_2017_03_23_pus_uvs.log on Mon May 13 10:12:01 2019 obs J2348+0624_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J2348+0624_S_2017_03_23_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.889692 visibilities/baseline/integration-bin. ! Found source: J2348+0624 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 13292 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2348+0624_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 269 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.902681Jy sigma=0.007284 ! Fit after self-cal, rms=0.888100Jy sigma=0.007174 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.73 mas, bmaj=7.067 mas, bpa=-5.5 degrees ! Estimated noise=1024.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0884181 Jy ! Component: 100 - total flux cleaned = 0.107744 Jy ! Total flux subtracted in 100 components = 0.107744 Jy ! Clean residual min=-0.005901 max=0.005880 Jy/beam ! Clean residual mean=0.000002 rms=0.001341 Jy/beam ! Combined flux in latest and established models = 0.107744 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.107744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100445Jy sigma=0.000708 ! Fit after self-cal, rms=0.100425Jy sigma=0.000708 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.253 mas, bmaj=7.659 mas, bpa=-4.677 degrees ! Estimated noise=834.768 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00830423 Jy ! Component: 100 - total flux cleaned = 0.0127806 Jy ! Component: 150 - total flux cleaned = 0.0156323 Jy ! Component: 200 - total flux cleaned = 0.017504 Jy ! Total flux subtracted in 200 components = 0.017504 Jy ! Clean residual min=-0.007015 max=0.006837 Jy/beam ! Clean residual mean=0.000018 rms=0.001836 Jy/beam ! Combined flux in latest and established models = 0.125248 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 34 components and 0.125248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099456Jy sigma=0.000703 ! Fit after self-cal, rms=0.099463Jy sigma=0.000703 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.04 HN 0.92 KP 1.09 ! LA 0.95 MK 0.96 NL 0.88 OV 1.05 ! PT 1.05 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.10 HN 1.02 KP 1.11 ! LA 0.90 MK 1.06 NL 1.04 OV 1.05 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.14 HN 0.97 KP 0.92 ! LA 0.72 MK 1.00 NL 1.15 OV 0.96 ! PT 0.95 SC 1.01 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.11 HN 0.94 KP 1.00* ! LA 0.70 MK 1.21 NL 1.00* OV 1.27 ! PT 0.92 SC 1.00* ! ! ! Fit before self-cal, rms=0.099463Jy sigma=0.000703 ! Fit after self-cal, rms=0.096477Jy sigma=0.000691 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.262 mas, bmaj=7.695 mas, bpa=-4.4 degrees ! Estimated noise=835.967 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.33365e-05 Jy ! Component: 100 - total flux cleaned = -0.000128726 Jy ! Component: 150 - total flux cleaned = -0.0001598 Jy ! Component: 200 - total flux cleaned = -0.000187724 Jy ! Total flux subtracted in 200 components = -0.000187724 Jy ! Clean residual min=-0.005287 max=0.006122 Jy/beam ! Clean residual mean=0.000017 rms=0.001535 Jy/beam ! Combined flux in latest and established models = 0.12506 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.12506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096449Jy sigma=0.000691 ! Fit after self-cal, rms=0.096480Jy sigma=0.000690 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096480Jy sigma=0.000690 ! Fit after self-cal, rms=0.096271Jy sigma=0.000684 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.264 mas, bmaj=7.722 mas, bpa=-4.473 degrees ! Estimated noise=838.969 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.67514e-05 Jy ! Component: 100 - total flux cleaned = -0.000113836 Jy ! Component: 150 - total flux cleaned = -0.000181823 Jy ! Component: 200 - total flux cleaned = -0.000242609 Jy ! Total flux subtracted in 200 components = -0.000242609 Jy ! Clean residual min=-0.005250 max=0.005465 Jy/beam ! Clean residual mean=0.000005 rms=0.001433 Jy/beam ! Combined flux in latest and established models = 0.124817 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 47 components and 0.124817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096253Jy sigma=0.000684 ! Fit after self-cal, rms=0.096311Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.50545e-05 Jy ! Component: 100 - total flux cleaned = -0.000115131 Jy ! Component: 150 - total flux cleaned = -0.000166897 Jy ! Component: 200 - total flux cleaned = -0.000196835 Jy ! Total flux subtracted in 200 components = -0.000196835 Jy ! Clean residual min=-0.005262 max=0.005449 Jy/beam ! Clean residual mean=0.000005 rms=0.001434 Jy/beam ! Combined flux in latest and established models = 0.12462 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 52 components and 0.12462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096301Jy sigma=0.000684 ! Fit after self-cal, rms=0.096301Jy sigma=0.000684 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096301Jy sigma=0.000684 ! Fit after self-cal, rms=0.096275Jy sigma=0.000683 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.27 mas, bmaj=7.743 mas, bpa=-4.512 degrees ! Estimated noise=838.904 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000777849 Jy ! Component: 100 - total flux cleaned = -0.000923893 Jy ! Component: 150 - total flux cleaned = -0.00098426 Jy ! Component: 200 - total flux cleaned = -0.00103689 Jy ! Total flux subtracted in 200 components = -0.00103689 Jy ! Clean residual min=-0.005234 max=0.005211 Jy/beam ! Clean residual mean=0.000002 rms=0.001424 Jy/beam ! Combined flux in latest and established models = 0.123584 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 56 components and 0.123584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096264Jy sigma=0.000683 ! Fit after self-cal, rms=0.096265Jy sigma=0.000683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000104035 Jy ! Component: 100 - total flux cleaned = -0.000102534 Jy ! Component: 150 - total flux cleaned = -0.000127104 Jy ! Component: 200 - total flux cleaned = -0.000148458 Jy ! Total flux subtracted in 200 components = -0.000148458 Jy ! Clean residual min=-0.005244 max=0.005209 Jy/beam ! Clean residual mean=0.000002 rms=0.001425 Jy/beam ! Combined flux in latest and established models = 0.123435 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 63 components and 0.123435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096259Jy sigma=0.000683 ! Fit after self-cal, rms=0.096259Jy sigma=0.000683 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096259Jy sigma=0.000683 ! Fit after self-cal, rms=0.096389Jy sigma=0.000683 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.475 mas, bmaj=11.53 mas, bpa=0.2612 degrees ! Estimated noise=1036.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.40348e-05 Jy ! Component: 100 - total flux cleaned = -1.32964e-05 Jy ! Component: 150 - total flux cleaned = -5.82862e-05 Jy ! Component: 200 - total flux cleaned = -9.66549e-05 Jy ! Total flux subtracted in 200 components = -9.66549e-05 Jy ! Clean residual min=-0.008266 max=0.009090 Jy/beam ! Clean residual mean=0.000004 rms=0.002771 Jy/beam ! Combined flux in latest and established models = 0.123338 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 66 components and 0.123338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096392Jy sigma=0.000683 ! Fit after self-cal, rms=0.096388Jy sigma=0.000683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.2758e-06 Jy ! Component: 100 - total flux cleaned = -3.46097e-05 Jy ! Component: 150 - total flux cleaned = -6.70612e-05 Jy ! Component: 200 - total flux cleaned = -9.21765e-05 Jy ! Total flux subtracted in 200 components = -9.21765e-05 Jy ! Clean residual min=-0.008286 max=0.009087 Jy/beam ! Clean residual mean=0.000004 rms=0.002770 Jy/beam ! Combined flux in latest and established models = 0.123246 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 67 components and 0.123246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096395Jy sigma=0.000683 ! Fit after self-cal, rms=0.096389Jy sigma=0.000683 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.275 mas, bmaj=7.759 mas, bpa=-4.538 degrees ! Estimated noise=838.964 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.275 x 7.759 at -4.538 degrees (North through East) ! Clean map min=-0.005072 max=0.11442 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.746 mas, bmaj=7.121 mas, bpa=-5.223 degrees ! Estimated noise=1033.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0889592 Jy ! Component: 100 - total flux cleaned = 0.108574 Jy ! Component: 150 - total flux cleaned = 0.115311 Jy ! Component: 200 - total flux cleaned = 0.118882 Jy ! Total flux subtracted in 200 components = 0.118882 Jy ! Clean residual min=-0.004185 max=0.004143 Jy/beam ! Clean residual mean=0.000001 rms=0.001134 Jy/beam ! Combined flux in latest and established models = 0.118882 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.118882 Jy ! Inverting map and beam ! Estimated beam: bmin=3.275 mas, bmaj=7.759 mas, bpa=-4.538 degrees ! Estimated noise=838.964 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00304096 Jy ! Component: 100 - total flux cleaned = 0.00362859 Jy ! Component: 150 - total flux cleaned = 0.00385566 Jy ! Component: 200 - total flux cleaned = 0.00394619 Jy ! Total flux subtracted in 200 components = 0.00394619 Jy ! Clean residual min=-0.005205 max=0.005306 Jy/beam ! Clean residual mean=0.000003 rms=0.001427 Jy/beam ! Combined flux in latest and established models = 0.122828 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 36 components and 0.122828 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.475 mas, bmaj=11.53 mas, bpa=0.2612 degrees ! Estimated noise=1036.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00056873 Jy ! Component: 100 - total flux cleaned = 0.000447881 Jy ! Component: 150 - total flux cleaned = 0.000415389 Jy ! Component: 200 - total flux cleaned = 0.00043806 Jy ! Total flux subtracted in 200 components = 0.00043806 Jy ! Clean residual min=-0.008329 max=0.009039 Jy/beam ! Clean residual mean=0.000005 rms=0.002772 Jy/beam ! Combined flux in latest and established models = 0.123266 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.99029e-05 Jy ! Component: 100 - total flux cleaned = 3.76385e-05 Jy ! Component: 150 - total flux cleaned = 3.70276e-05 Jy ! Component: 200 - total flux cleaned = 5.43003e-05 Jy ! Total flux subtracted in 200 components = 5.43003e-05 Jy ! Clean residual min=-0.008333 max=0.009035 Jy/beam ! Clean residual mean=0.000005 rms=0.002771 Jy/beam ! Combined flux in latest and established models = 0.12332 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 46 components and 0.12332 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.275 mas, bmaj=7.759 mas, bpa=-4.538 degrees ! Estimated noise=838.964 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000134365 Jy ! Component: 100 - total flux cleaned = -0.000232014 Jy ! Component: 150 - total flux cleaned = -0.000229485 Jy ! Component: 200 - total flux cleaned = -0.000271942 Jy ! Total flux subtracted in 200 components = -0.000271942 Jy ! Clean residual min=-0.005196 max=0.005222 Jy/beam ! Clean residual mean=0.000003 rms=0.001423 Jy/beam ! Combined flux in latest and established models = 0.123048 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 54 components and 0.123048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096399Jy sigma=0.000683 ! Fit after self-cal, rms=0.096394Jy sigma=0.000683 wmodel J2348+0624_S_2017_03_23_pus_map.mod ! Writing 54 model components to file: J2348+0624_S_2017_03_23_pus_map.mod wobs J2348+0624_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J2348+0624_S_2017_03_23_pus_uvs.fits wwins J2348+0624_S_2017_03_23_pus_map.win ! wwins: Wrote 1 windows to J2348+0624_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134598 Jy ! Component: 100 - total flux cleaned = 0.00292658 Jy ! Component: 150 - total flux cleaned = 0.0038368 Jy ! Component: 200 - total flux cleaned = 0.00462427 Jy ! Component: 250 - total flux cleaned = 0.00545079 Jy ! Component: 300 - total flux cleaned = 0.00645755 Jy ! Component: 350 - total flux cleaned = 0.0071506 Jy ! Component: 400 - total flux cleaned = 0.00762465 Jy ! Component: 450 - total flux cleaned = 0.00821659 Jy ! Component: 500 - total flux cleaned = 0.00866423 Jy ! Component: 550 - total flux cleaned = 0.00897606 Jy ! Component: 600 - total flux cleaned = 0.00915968 Jy ! Component: 650 - total flux cleaned = 0.00939956 Jy ! Component: 700 - total flux cleaned = 0.00963577 Jy ! Component: 750 - total flux cleaned = 0.00992547 Jy ! Component: 800 - total flux cleaned = 0.010265 Jy ! Component: 850 - total flux cleaned = 0.0105982 Jy ! Component: 900 - total flux cleaned = 0.0108173 Jy ! Component: 950 - total flux cleaned = 0.0111384 Jy ! Component: 1000 - total flux cleaned = 0.0114545 Jy ! Component: 1050 - total flux cleaned = 0.0116629 Jy ! Component: 1100 - total flux cleaned = 0.0121196 Jy ! Component: 1150 - total flux cleaned = 0.0122693 Jy ! Component: 1200 - total flux cleaned = 0.0124655 Jy ! Component: 1250 - total flux cleaned = 0.0127064 Jy ! Component: 1300 - total flux cleaned = 0.0129434 Jy ! Component: 1350 - total flux cleaned = 0.0130843 Jy ! Component: 1400 - total flux cleaned = 0.0134071 Jy ! Component: 1450 - total flux cleaned = 0.0136335 Jy ! Component: 1500 - total flux cleaned = 0.0137681 Jy ! Component: 1550 - total flux cleaned = 0.0139449 Jy ! Component: 1600 - total flux cleaned = 0.0139884 Jy ! Component: 1650 - total flux cleaned = 0.0141613 Jy ! Component: 1700 - total flux cleaned = 0.0142038 Jy ! Component: 1750 - total flux cleaned = 0.0142877 Jy ! Component: 1800 - total flux cleaned = 0.0143715 Jy ! Component: 1850 - total flux cleaned = 0.0145765 Jy ! Component: 1900 - total flux cleaned = 0.0145767 Jy ! Component: 1950 - total flux cleaned = 0.0146573 Jy ! Component: 2000 - total flux cleaned = 0.014618 Jy ! Component: 2050 - total flux cleaned = 0.0146969 Jy ! Component: 2100 - total flux cleaned = 0.0146968 Jy ! Component: 2150 - total flux cleaned = 0.014697 Jy ! Component: 2200 - total flux cleaned = 0.0148106 Jy ! Component: 2250 - total flux cleaned = 0.0148104 Jy ! Component: 2300 - total flux cleaned = 0.0148477 Jy ! Component: 2350 - total flux cleaned = 0.0149576 Jy ! Component: 2400 - total flux cleaned = 0.0148485 Jy ! Component: 2450 - total flux cleaned = 0.0150283 Jy ! Component: 2500 - total flux cleaned = 0.0149222 Jy ! Component: 2550 - total flux cleaned = 0.0149575 Jy ! Component: 2600 - total flux cleaned = 0.0150973 Jy ! Component: 2650 - total flux cleaned = 0.0150625 Jy ! Component: 2700 - total flux cleaned = 0.0151309 Jy ! Component: 2750 - total flux cleaned = 0.0152326 Jy ! Component: 2800 - total flux cleaned = 0.0152324 Jy ! Component: 2850 - total flux cleaned = 0.015232 Jy ! Component: 2900 - total flux cleaned = 0.0153308 Jy ! Component: 2950 - total flux cleaned = 0.0152003 Jy ! Component: 3000 - total flux cleaned = 0.0153299 Jy ! Component: 3050 - total flux cleaned = 0.0154894 Jy ! Component: 3100 - total flux cleaned = 0.0153941 Jy ! Component: 3150 - total flux cleaned = 0.0154248 Jy ! Component: 3200 - total flux cleaned = 0.0154249 Jy ! Component: 3250 - total flux cleaned = 0.0153941 Jy ! Component: 3300 - total flux cleaned = 0.015425 Jy ! Component: 3350 - total flux cleaned = 0.015455 Jy ! Component: 3400 - total flux cleaned = 0.0154547 Jy ! Component: 3450 - total flux cleaned = 0.0154845 Jy ! Component: 3500 - total flux cleaned = 0.0154843 Jy ! Component: 3550 - total flux cleaned = 0.0154844 Jy ! Component: 3600 - total flux cleaned = 0.0154847 Jy ! Component: 3650 - total flux cleaned = 0.0155421 Jy ! Component: 3700 - total flux cleaned = 0.0155707 Jy ! Component: 3750 - total flux cleaned = 0.0156273 Jy ! Component: 3800 - total flux cleaned = 0.0157114 Jy ! Component: 3850 - total flux cleaned = 0.0156279 Jy ! Component: 3900 - total flux cleaned = 0.0156831 Jy ! Component: 3950 - total flux cleaned = 0.0157925 Jy ! Component: 4000 - total flux cleaned = 0.0157652 Jy ! Component: 4050 - total flux cleaned = 0.015765 Jy ! Total flux subtracted in 4096 components = 0.015738 Jy ! Clean residual min=-0.001710 max=0.001953 Jy/beam ! Clean residual mean=-0.000004 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.138786 Jy keep ! Adding 455 model components to the UV plane model. ! The established model now contains 509 components and 0.138786 Jy ![Exited script file: muppet] wmap "J2348+0624_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.275 x 7.759 at -4.538 degrees (North through East) ! Clean map min=-0.0035101 max=0.11474 Jy/beam ! Writing clean map to FITS file: J2348+0624_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.11474 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000556018 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.45376 1.45376 2.90753 5.81506 11.6301 23.2602 46.5205 93.0409 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.114 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.275 x 7.759 at -4.538 degrees (North through East) ! Clean map min=-0.0035101 max=0.11474 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2348+0624_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:12:06 2019